Intermolecular oxidative C-N bond formation under metal-free conditions: control of chemoselectivity between aryl sp2 and benzylic sp3 C-H bond imidation

A new synthetic approach toward intermolecular oxidative C-N bond formation of arenes has been developed under transition-metal-free conditions. Complete control of chemoselectivity between aryl sp(2) and benzylic sp(3) C-H bond imidation was achieved by the choice of nitrogen sources, representatively being phthalimide and dibenzenesulfonimide, respectively.     

Stereoselective intermolecular C-H amination reactions

A novel chiral N-mesyloxycarbamate to perform rhodium-catalyzed stereoselective C-H amination reactions is reported. Chiral benzylic and propargylic amines are produced in good yields and selectivities using ethyl acetate as solvent. The corresponding free amines are easily obtained by cleavage of the chiral reagent, which could also be recovered.     

TEMPO/CuI synergetic catalyzed oxidative cross-coupling of indoles with benzylamines: Synthesis of bis(indolyl)phenylmethanes

TEMPO/CuI was found to be an effective catalyst for the cross-coupling of indoles with benzylic amines affording the corresponding bis(indolyl)phenylmethanes under air atmosphere at room temperature in good to excellent yields. The efficiency, easy workup, simplicity, and chemoselectivity of this protocol provide a green and low-cost procedure for the synthesis of these compounds.     

New strategic reactions for organic synthesis: catalytic asymmetric C-H activation alpha to nitrogen as a surrogate for the mannich reaction

The asymmetric C-H activation reactions of methyl aryldiazoacetates are readily induced by the rhodium prolinate catalyst Rh(2)(S-DOSP)(4) (1) or the bridged prolinate catalysts Rh(2)(S-biDOSP)(2) (2a) and Rh(2)(S-biTISP)(2) (2b). The C-H activation of N-Boc-protected cyclic amines demonstrates that the donor/acceptor-substituted carbenoids display remarkable chemoselectivity, which allows for highly regioselective, diastereoselective, and enantioselective reactions to be achieved. Furthermore, the reactions can display high levels of double stereodifferentiation and kinetic resolution. The C-H activation is caused by a rhodium carbenoid induced C-H insertion. The potential of this chemistry is demonstrated by a very direct synthesis of threo-methylphenidate.     

Visible-light-induced selective photocatalytic aerobic oxidation of amines into imines on TiO2

Imines are important intermediates for the synthesis of fine chemicals, pharmaceuticals, and agricultural chemicals. Selective oxidation of amines into their corresponding imines with dioxygen is one of the most-fundamental chemical transformations. Herein, we report the oxidation of a series of benzylic amines into their corresponding imines with atmospheric dioxygen as the oxidant on a surface of anatase TiO(2) under visible-light irradiation (λ>420 nm). The visible-light response of this system was caused by the formation of a surface complex through the adsorption of a benzylic amine onto the surface of TiO(2). From the analysis of products of specially designed benzylic amines, we demonstrated that a highly selective oxygenation reaction proceeds via an oxygen-transfer mechanism to afford the corresponding carbonyl compound, whose further condensation with an amine would generate the final imine product. We found that when primary benzylic amines (13 examples), were chosen as the substrates, moderate to excellent selectivities for the imine products were achieved (ca. 38-94%) in moderate to excellent conversion rates (ca. 44-95%). When secondary benzylic amines (15 examples) were chosen as the substrates, both the corresponding imines and aldehydes were detected as the main products with moderate to high conversion rates (ca. 18-100%) and lower selectivities for the imine products (ca. 14-69%). When tribenzylamine was chosen as the substrate, imine (27%), dibenzylamine (24%), and benzaldehyde products (39%) were obtained in a conversion of 50%. This report can be viewed as a prototypical system for the activation of C-H bonds adjacent to heteroatoms such as N, O, and S atoms, and oxofuctionalization with air or dioxygen as the terminal oxidant under visible-light irradiation using TiO(2) as the photocatalyst.     

De novo synthesis of Troc-protected amines: intermolecular rhodium-catalyzed C-H amination with N-tosyloxycarbamates

The rhodium-catalyzed intermolecular C-H insertion of the nitrene derived from 2,2,2-trichloroethyl-N-tosyloxycarbamate proceeded in good to excellent yields to produce a variety of Troc-protected amines. With cyclic aliphatic alkanes, it is possible to use only 2 equiv of substrate, whereas the reaction with aromatic alkanes is run neat. Not only does the nitrene insertion proceed in benzylic, secondary, and tertiary C-H bonds but also primary C-H insertion products were obtained in good yields. Finally, the use of chiral rhodium catalysts to provide an enantioselective version of this process is discussed. [reaction: see text].     

C-H amination/cyclocarbonylation of allene carbamates: a versatile platform for the synthesis of α,β-unsaturated γ-lactams

Despite their utility as building blocks for the construction of a variety of nitrogen-containing heterocyclic scaffolds, the preparation of allenic amines 2 via the direct C-H amination of allenes of the general structure 1 has not been well-explored. In this report, we describe our preliminary studies on the factors that control the chemoselectivity of Rh-catalyzed aminations of allenes to give either bicyclic methylene aziridines or the desired allenic amines 2. Additionally, the conversion of selected allenic amines to α,β-unsaturated γ-lactam scaffolds via a facile Ru₃(CO)₁₂ catalyzed cyclocarbonylation is described.     

Transition-Metal Free Electrophilic Aminations of Polyfunctional O-2,4,6-Trimethylbenzoyl Hydroxylamines with Zinc and Magnesium Organometallics

We reported a new electrophilic amination of various primary, secondary and tertiary alkyl, benzylic, allylic zinc and magnesium organometallics with O-2,4,6-trimethylbenzoyl hydroxylamines (O-TBHAs) in 52–99 % yield. These O-TBHAs displayed an excellent long-term stability and were readily prepared from various highly functionalized secondary amines via a convenient 3 step procedure. The amination reactions showed remarkable chemoselectivity proceeding without any transition-metal catalyst and were usually complete after 1–3 h reaction time at 25 °C. Furthermore, this electrophilic amination also provided access to enantioenriched tertiary amines (up to 88 % ee) by using optically enriched secondary alkylmagnesium reagents of the type s-AlkylMgCH₂SiMe₃.     

Iridium-catalyzed, substrate-directed C-H borylation reactions of benzylic amines

The iridium-catalyzed arene C-H borylation reaction of benzylic amines has been developed, which inverts the typical steric-controlled product distribution to provide ortho-substituted boronate esters. Picolylamine was found to be an ideal ligand to replace 4,4'-di-tert-butylbipyridine to induce the directing effect. Preliminary experiments are consistent with a mechanism involving dissociation of one amine of the hemilabile diamine ligand.     

N-tosyloxycarbamates as reagents in rhodium-catalyzed C-H amination reactions

Metal nitrenes for use in C-H insertion reactions were obtained from N-tosyloxycarbamates in the presence of an inorganic base and a rhodium(II) dimer complex catalyst. The C-H amination reaction proceeds smoothly, and the potassium tosylate that forms as a byproduct is easily removed by filtration or an aqueous workup. This new methodology allows the amination of ethereal, benzylic, tertiary, secondary, and even primary C-H bonds. The intramolecular reaction provides an interesting route to various substituted oxazolidinones, whereas the intermolecular reaction gives trichloroethoxycarbonyl-protected amines that can be isolated with moderate to excellent yields and that cleave easily to produce the corresponding free amine. The development, scope, and limitations of the reactions are discussed herein. Isotopic effects and the electronic nature of the transition state are used to discuss the mechanism of the reaction.     

Chemoselective organocatalytic aerobic oxidation of primary amines to secondary imines

Biomimetic aerobic oxidation of primary benzylic amines has been achieved by using a quinone catalyst. Excellent selectivity is observed for primary, unbranched benzylic amines relative to secondary/tertiary amines, branched benzylic amines, and aliphatic amines. The exquisite selectivity for benzylic amines enables oxidative self-sorting within dynamic mixtures of amines and imines to afford high yields of cross-coupled imine products.     

PtBr2-catalyzed transformation of allyl(o-ethynylaryl)carbinol derivatives into functionalized indenes. Formal sp3 C-H bond activation

The PtBr2-catalyzed reaction of 1-ethynyl-2-(1-alkoxybut-3-enyl)benzenes at 120 degrees C in CH3CN gave functionalized indenes in good to allowable yields. Most probably, the hydrogen at the terminal alkyne is transferred to the adjacent internal beta-carbon to form an (eta2-vinylidene)platinum carbene intermediate, which activates the sp3 C-H bond at the benzylic carbon. This reaction pathway is supported by DFT calculations which suggest that the formation of the Pt-vinylidene complex is the rate-limiting stage for the whole transformation.     

Copper-catalyzed oxidative coupling of benzylic C-H bonds with 1,3-dicarbonyl compounds

A copper-catalyzed oxidative coupling of benzylic C-H bonds with 1,3-dicarbonyl compounds is described. The reaction utilizes an inexpensive copper catalyst-oxidant system that is suitable for the coupling of a range of benzylic C-H bonds with various 1,3-dicarbonyl compounds. Kinetic isotope studies support a mechanism involving a benzylic hydrogen abstraction.     

Metal-free oxidative C-C bond formation of active methylenic sp C-H bonds with benzylic sp C-H and allylic sp C-H bonds mediated by DDQ

An efficient and simple method for the oxidative coupling of benzylic and allylic sp³ C-H bonds with active methylenic sp³ C-H bonds under metal-free conditions was developed by employing 2,3-dichloro-5,6-dicyanobenzoquinone (DDQ) as an oxidant. The reaction was shown to proceed smoothly for various 1,3-dicarbonyl compounds with a range of benzylic and allylic substrates in good to excellent yields.     

Copper-catalyzed coupling of tertiary aliphatic amines with terminal alkynes to propargylamines via C-H activation

We have developed a convenient and efficient method for coupling of tertiary aliphatic amines with terminal alkynes to propargylamines via C-H activation. The protocol uses CuBr as the catalyst, NBS as the free radical initiator, CH(3)CN as the solvent, and the alkynylation was selectively performed on the methyl of tertiary aliphatic amines at 80 degrees C. This is an economical and practical method for the synthesis of propargylamines.     

Benzylic C-H activation and C-O bond formation via aryl to benzylic 1,4-palladium migrations

A procedure for benzylic C-H activation has been developed using a palladium 1,4-aryl to benzylic migration as a key step. Carboxylates and phenoxides readily trap the resulting benzylic palladium intermediates obtained from palladium ‘through space’ migration. Aryl bromides and iodides have been successfully employed in this reaction, furnishing moderate to good yields. The mechanism of this reaction has been studied by deuterium-labeling experiments, which suggest that the migration of palladium from an aryl to a benzylic position occurs reversibly. The reaction conditions developed for the migration process also oxidize the neighboring benzylic alcohols to the corresponding aldehydes and ketones.     

Substituent Effects on the C-H Bond Dissociation Energy of Toluene. A Density Functional Study

The bond dissociation energies of the benzylic C-H bond of a series of 16 para-substituted toluene compounds (p-X-C(6)H(4)CH(3)) have been calculated with the density functional method (BLYP/6-31G). The calculated substituent effects correlate well with experimental rates of dimerization of para-substituted alpha,beta,beta-trifluorostyrenes and rearrangement of methylenearylcyclopropanes. Both electron-donating and electron-withdrawing groups reduce the bond dissociation energy (BDE) of the benzylic C-H bond because both groups cause spin delocalization from the benzylic radical center. The calculated spin density variations at the benzylic radical centers correlate well with both the ESR hyperfine coupling constants determined by Arnold et al. and the calculated radical effects of the substituents. The relative radical stabilities are mainly determined by the spin delocalization effect of the substituents, and polar effect of the substituents are not important in the current situation. The ground state effect is also found to influence the C-H BDE.     

Selective oxidation of benzylic and allylic alcohols using Mn(OAc)3/catalytic 2,3-dichloro-5,6-dicyano-1,4-benzoquinone

A practical, chemoselective oxidation of alcohols employing catalytic quantities of DDQ as the oxidant and Mn(OAc)(3) as the co-oxidant is described. Electron-rich benzylic alcohols are oxidized efficiently to their corresponding carbonyls, but less electron-rich benzylic alcohols remain unchanged. Allylic alcohols are rapidly oxidized to their corresponding aldehyde or ketone counterparts in high yields. This protocol is operationally simple, employs an inexpensive source of Mn(OAc)(3), has short reaction times, and exhibits a significant chemoselectivity favoring allylic alcohols over benzylic alcohols. This procedure also avoids the use of very large excesses of reagents and sometimes poor reproducibility that characterize previously developed reagents such as MnO(2).     

Catalytic asymmetric benzylic C-H activation by means of carbenoid-induced C-H insertions

Tetrakis[N-[4-dodecylphenyl)sulfonyl]-(S)-prolinate]dirhodium [Rh(2)(S-DOSP)(4)]-catalyzed decomposition of methyl aryldiazoacetates in the presence of substituted ethylbenzenes results in benzylic C-H activation by means of a rhodium-carbenoid-induced C-H insertion. A Hammet study showed that positive charge buildup occurred on the benzylic carbon in the transition state of the C-H activation step. C-H activation of toluene and isopropylbenzene is possible, but a competing double cyclopropanation occurs with these substrates. The C-H activation is highly regioselective and enantioselective, and in certain cases, moderate diastereoselectivity is also possible.