基于AuCl(油胺)复合物合成形貌可控的金纳米结构

简要综述了使用一价金复合物AuCl(油胺)作为前驱物合成形貌可控的金纳米结构的相关工作. 通过改变有机溶剂、添加异质金属纳米粒子及控制反应温度等手段, 成功合成出球形的金纳米粒子(平均直径12.7 nm)、超细金纳米线(平均直径1.8 nm)及超细金纳米棒(平均直径2 nm); 并通过牺牲磁性纳米粒子模板的方法合成出枝状金纳米结构. 除了对合成方法和过程的介绍, 还简要讨论了每种纳米结构的形成机制.     

Evidence for patchy lipid layers on gold nanoparticle surfaces

Gold nanoparticles bearing multiple surface ligands are becoming favored candidates as multifunctional targeting, imaging, and therapeutic vehicles for biomedicine. The question of spatial location of different ligands on nanoparticle surfaces, especially with those of diameters less than 100 nm, is an important one that is difficult to quantitatively address. Here we functionalize the surface of 20, 50, and 90 nm gold nanoparticles with two different lipids, both single and mixed, using two different surface chemical procedures. Mass spectrometry supports the presence of both lipids in the mixed-lipid systems on nanoparticles, while electron microscopy evidence shows domain sizes for one lipid apparently a quarter to a half the projected diameter for 50 and 90 nm particles; but for 20 nm particles, there is no evidence for the existence of patches of the two lipids. Larger gold nanoparticles (90 nm) can be decorated with an array of 12 nm gold nanoparticles by use of a third lipid and antibody-antigen connectors; the display of the 12 nm particles about the 90 nm particles can be controlled to some extent by the initial surface chemistry and is quantified via a new angle analysis procedure.     

Binding of chloroquine-conjugated gold nanoparticles with bovine serum albumin

We have conjugated chloroquine, an anti-malarial, antiviral and anti-tumor drug, with thiol-functionalized gold nanoparticles and studied their binding interaction with bovine serum albumin (BSA) protein. Gold nanoparticles have been synthesized using sodium borohydride as reducing agent and 11-mercaptoundecanoic acid as thiol functionalizing ligand in aqueous medium. The formation of gold nanoparticles was confirmed from the characteristic surface plasmon absorption band at 522 nm and transmission electron microscopy revealed the average particle size to be ~7 nm. Chloroquine was conjugated to thiolated gold nanoparticles by using EDC/NHS chemistry and the binding was analyzed using optical density measurement and Fourier transform infrared spectroscopy. The chloroquine-conjugated gold nanoparticles (GNP-Chl) were found to interact efficiently with BSA. Thermodynamic parameters suggest that the binding is driven by both enthalpy and entropy, accompanied with only a minor alteration in protein's structure. Competitive drug binding assay revealed that the GNP-Chl bind at warfarin binding site I in subdomain IIA of BSA and was further supported by Trp212 fluorescence quenching measurements. Unraveling the nature of interactions of GNP-Chl with BSA would pave the way for the design of nanotherapeutic agents with improved functionality, enriching the field of nanomedicine.     

Surface chemistry of gold nanoparticles for health-related applications

Functionalization of gold nanoparticles is crucial for the effective utilization of these materials in health-related applications. Health-related applications of gold nanoparticles rely on the physical and chemical reactions between molecules and gold nanoparticles. Surface chemistry can precisely control and tailor the surface properties of gold nanoparticles to meet the needs of applications. Gold nanoparticles have unique physical and chemical properties, and have been used in a broad range of applications from prophylaxis to diagnosis and treatment. The surface chemistry of gold nanoparticles plays a crucial role in all of these applications. This minireview summarizes these applications from the perspective of surface chemistry and explores how surface chemistry improves and imparts new properties to gold nanoparticles for these applications.

Functionalization of gold nanoparticles is crucial for the effective utilization of these materials in health-related applications.     

Bioconjugation of Interferon-alpha Molecules to Lysine-Capped Gold Nanoparticles for Further Drug Delivery Applications

Gold nanoparticles are potentially very attractive components for therapeutic delivery since they can be synthesized with any diameter from 1 to 200 nm to carry a payload of therapeutic molecules into a cell without triggering an immune response. Gold nanoparticles must undergo surface transformations before coupling to therapeutic molecules to become eligible for this purpose. It is now more understood that amine groups can bind to gold nanoparticles strongly, which has enabled surface modification of gold nanoparticles with amino acid lysine through its amine group. These lysine capped gold nanoparticles can further be coupled to therapeutic molecules for delivery purposes. In this study gold nanoparticles were first synthesized and capped with lysine molecules. TEM and FTIR measurements demonstrated the synthesis of lysine-capped gold nanoparticles with an average diameter of 10 nanometers. Interferon alpha molecules-one of the most important therapeutic protein were then chemically bound to lysine-capped gold nanoparticles through a two-step process of diimide-activated amidation. The conjugation of interferon molecules to lysine capped gold nanoparticles was carried out via the reaction between the free amine group of lysine and carboxyl groups of interferon using N-ethyl-N′-13-dimethyl-aminopropyl (EDAC) as a coupling agent. The process of conjugation has also been studied by transmission electron microscopy.     

金纳米粒子与蛋白质的相互作用及其应用

金纳米粒子与蛋白质间存在多种作用方式,包括物理吸附、化学共价结合以及非共价特异性吸附等.金纳米粒子表面等离子体共振效应引起可见光区的特征吸收及表面增强拉曼散射,常用来研究金纳米粒子与蛋白质间的相互作用.金纳米粒子与蛋白质间的作用与纳米粒子的尺寸、表面化学及蛋白质的大小、电荷、氨基酸残基有关.利用金纳米粒子与蛋白质的相互作用及纳米金的谱学性质,可以对疾病或环境污染进行简单、高效、低成本检测,也可用于疾病治疗.     

Chemiluminescence from the decomposition of peroxymonocarbonate catalyzed by gold nanoparticles

In this work, an online preparation of peroxymonocarbonate was formed innovatively, which offered the reliable intermediate for further investigation. Gold colloids with nanoparticles of different sizes were found to enhance the chemiluminescence (CL) of the peroxymonocarbonate-eosin Y system, and the most intensive CL signals were obtained with 50 +/- 1 nm diameter gold nanoparticles. UV-visible adsorption spectra, fluorescence spectra, transmission electron microscopy images, electron paramagnetic resonance spin-trapping spectra, and mass spectra were obtained in order to study the CL enhancement mechanism. Peroxymonocarbonate, a reactive oxygen species, can be decomposed to singlet oxygen which transfers its energy to eosin Y. The CL can be induced by excited eosin Y. Gold nanoparticles facilitated the radical generation and singlet oxygen molecular formation on the surface of the gold nanoparticles. Thus, the CL emission enhanced greatly by adding gold nanoparticles into the system.     

Phase transfer of large gold nanoparticles to organic solvents with increased stability

In this paper, we describe a new procedure to phase transfer large gold nanoparticles (diameters > 45 nm) from aqueous solution to organic solvents. This is accomplished using a covalent amide coupling reaction that incorporates dicyclohexylamine (DCHA) headgroups on the surface of mercaptoacetic acid (MAA) functionalized gold nanoparticles. Gold nanoparticles are first synthesized in aqueous solution by the citrate-reduction method, and nanoparticle size is controlled by the molar ratio of the reducing agent (sodium citrate) and the gold precursor (KAuCl4). MAA is then adsorbed to the surface of the gold nanoparticles followed by an amide-coupling reaction to covalently attach DCHA to the surface-immobilized MAA. The bulky dicyclohexyl groups entropically stabilize gold nanoparticles in organic solvents. This procedure was used to reliably transfer gold nanoparticles with diameters between 45 and 100 nm from aqueous solution to organic solvents such as dimethyl sulfoxide and chloroform.     

Aggregation of photolytic gold nanoparticles at the surface of chitosan films

Formation and aggregation of photolytic gold nanoparticles at the surface of chitosan (CTO) films have been investigated. When thin films of chloroauric acid salt of CTO were irradiated with UV light in wet air at room temperature for 10 min, gold nanoparticles of approximately 10 nm size are formed at the film surface. Detailed X-ray photoelectron spectroscopy (XPS) study and field emission type scanning electron microscopy (FE-SEM) observation have been carried out to characterize gold nanoparticles at the film surface. The shift of Au(4f) peak to the higher energy side and broadening of full width at half-maximum in the XPS spectrum are the direct evidence of the existence of gold atoms and small clusters in the early stage of photolysis. According to FE-SEM observation, growth in the particle diameter and aggregation of nanoparticles were observed after prolonged irradiation, and, finally, the film surface was densely covered with gold particles of 20-100-nm size. Gold atoms and clusters could move in the film and precipitate to the irradiated surface. Chemical composition analysis further suggests that gold particles at the surface are covered with an ultrathin CTO layer, which is partly oxidized by oxygen and chlorinated by chlorine during photochemical reactions.     

Amperometric hydrazine sensor using a glassy carbon electrode modified with gold nanoparticle-decorated multiwalled carbon nanotubes

Microchimica Acta - Gold nanoparticles (AuNP) were deposited on the surface of multiwalled carbon nanotubes (MWCNT) by in-situ thermal decomposition of gold acetate under solvent and reducing agent...     

Electrophoretic separation of gold nanoparticles according to bifunctional molecules‐induced charge and size

Gold nanospheres modified with bifunctional molecules have been separated and characterized by using agarose gel electrophoresis as well as optical spectroscopy and electron microscopy. The electrophoretic mobility of a gold nanosphere capped with 11‐mercaptoundecanoic acid (MUA) has been found to depend on the number of MUA molecules per gold nanosphere, indicating that it increases with the surface charge of the nanoparticle. The extinction spectrum of gold nanospheres capped with MUA at an MUA molecules per gold nanosphere value of 1000 and connected via 1,6‐hexanedithiol (HDT) decreases by 33% in magnitude and shifts to the red as largely as 22 nm with the increase of the molar ratio of HDT to MUA (R_HM). Gold nanospheres capped with MUA and connected via HDT have been separated successfully using gel electrophoresis and characterized by measuring reflectance spectra of discrete electrophoretic bands directly in the gel and by monitoring transmission electron microscope images of gold nanoparticles collected from the discrete bands. Electrophoretic mobility has been found to decrease substantially with the increment of HDT to MUA, indicating that the size of aggregated gold nanoparticles increases with the concentration of HDT.     

金纳米粒子组装结构中的表面重组现象

以纳米粒子为基本结构单元构筑的各种二维或三维超晶格结构受到了广泛的重视［１］．人们的兴趣一方面来源于在纳米尺度上控制材料结构 ,另一方面则因为组织化的纳米材料或结构具有独特的性质 ,以期在非线性光学、纳米电子学等前沿领域得到应用［２］．当前研究最多的结构形式是固体表面上的纳米粒子阵列或单层薄膜 ,通常是胶体粒子靠某种特殊相互作用吸附或沉积在固体表面上（亦称为“纳米粒子在表面上的组装［３］”） ,因此对纳米粒子及固体表面进行功能化的修饰 ,从而控制纳米粒子在表面上的排列和聚集状态 ,是制备这类复合结构的核心问…     

Influence of intense pulsed laser irradiation on optical and morphological properties of gold nanoparticle aggregates produced by surface acid-base reactions

Gold nanoparticles were surface modified with an ionizable and pH-sensitive monolayer of thiobarbituric acid (TBA). By variation of the pH value of the solution, nanoparticle aggregates can be produced in a controlled way. The aggregates thus prepared were irradiated with an intense pulsed laser at 532 nm. The products in solution were examined by transmission electron microscopy (TEM) and optical absorption spectroscopy. The TEM images of the products revealed that the nanoparticle aggregates dissociate upon laser irradiation and form much smaller gold nanoparticles. The optical absorption spectra measured simultaneously show the gradual disappearance of the absorbance band of the aggregates at around 680 nm. Additionally, a blue shift (from 534 to 524 nm) of the resonance absorbance corresponding to isolated nanoparticles has been observed. All the observations suggest that the colloidal solution becomes more stable after laser irradiation. Both the reduced nanoparticle size and the stabilizing TBA ligands present on the particle surface contribute to the acquired stability of the colloidal solutions.     

Size-selective synthesis and stabilization of gold organosol in C(n)TAC: enhanced molecular fluorescence from gold-bound fluorophores

Gold nanoparticles of variable sizes have been synthesized in toluene employing two-phase (water-toluene) extraction of AuCl4- followed by its reduction with sodium borohydride in the presence of a series of cationic surfactants of a homologous series having the general formula C(n)TAC. The solubility features of the gold particles in the organic solvent have been accounted qualitatively by calculating the van der Waals interaction potential between the particles. The effect of thermal energy and medium dielectric constant on the stability of metal particles has been studied by measuring the surface plasmon resonance. The stabilization of surfactant-mediated gold particles as hydrosol or organosol has been elucidated by considering the double-layer interaction as a function of the dielectric constant of the solvent medium. The influence of the counterion of the phase transfer reagent and stabilizing ligand on the photochemical stability of the gold colloids has been investigated. The fluorescence probe 1-methylaminopyrene (MAP) was considered for the surface functionalization of the gold particles, and it has been found that there is an enhancement of molecular fluorescence from the gold-probe assembly.     

Synthesis of flexible, ultrathin gold nanowires in organic media

Gold nanoparticles are very interesting because of their potential applications in microelectronics, optical devices, analytical detection schemes, and biomedicine. Though shape control has been achieved in several polar solvents, the capability to prepare organosols containing elongated gold nanoparticles has been very limited. In this work we report a novel, simplified method to produce long, thin gold nanowires in an organic solvent (oleylamine), which can be readily redispersed into nonpolar organic solvents. These wires have a characteristic flexible, hairy morphology arising from a small thickness (<2 nm) and an enormous length (up to several micrometers), with the possibility of adjusting the dimensions through modification of the growth conditions, in particular, the gold salt concentration. Despite their extreme aspect ratio, the wires are stable in solution for long periods of time but easily break when irradiated with high-energy electron beams during transmission electron microscopy.     

Chemiluminescent reactions induced by gold nanoparticles

The reaction of gold nanoparticles with a potassium periodate-sodium hydroxide-carbonate system undergoes chemiluminescence with three emission bands at 380-390, 430-450, and 490-500 nm, respectively. It was found that the light intensity increased linearly with the concentration of the gold nanoparticles, and the CL intensity increased dramatically when the citrate ions on the nanoparticle surface were replaced by SCN(-). The shape, size, and oxidation state of gold nanoparticles after the chemiluminescent reaction were characterized by UV-visible absorption spectrometry, transmission electron microscopy (TEM), and X-ray photoelectron spectrometry (XPS). Gold nanoparticles are supposed to function as a nanosized platform for the observed chemiluminescent reactions. A chemiluminescent mechanism has been proposed in which the interaction between free CO(3)(*-) and O(2)(*-) radicals generated by a KIO(4)-NaOH-Na(2)CO(3) system and gold nanoparticles results in the formation of emissive intermediate gold(I) complexes, carbon dioxide dimers, and singlet oxygen molecular pairs on the surface of the gold nanoparticles. This work is not only of great importance for gaining a better understanding of the unique optical and surface properties and chemical reactivity of nanoparticles but also of great potential for developing new biosensing and immunolabeling technologies.     

Synthesis of gold nanoparticles from an organometallic compound in supercritical carbon dioxide

This article presents the synthesis of gold nanoparticles in a single-phase supercritical fluid carbon dioxide solvent. The gold nanoparticles were formed by the reduction of triphenylphosphine gold(I) perfluorooctanoate with dimethylamineborane. Transmission electron microscopy, X-ray photoelectron spectroscopy, and UV-vis spectroscopy reveal the formation of gold nanoparticles of 1 nm in diameter. A high dispersion stability of the gold nanoparticles in supercritical carbon dioxide can be obtained by binding both triphenylphosphine and fluorocarbon ligands on the surface of the gold nanoparticles.     

组装在贵金属基底上的金纳米粒子对CO的电化学催化氧化

研究了组装在Au, Pt电极表面的金纳米粒子对CO的电化学催化氧化行为, 首次在实验上观察到较大粒径金纳米粒子(粒径＞10 nm)对CO的电催化氧化活性. 考察了金粒子表面金氧化物对粒子电催化活性的影响, 发现表面金氧化物的形成是金纳米粒子对CO具有电催化氧化活性的前提. 对于相同粒径的金纳米粒子, 随着粒子表面金氧化物量的增加,催化活性增大.     

Surface charge influence on the surface plasmon absorbance of electroactive thiol-protected gold nanoparticles

Gold nanoparticles (3.1-5.0 nm in size) surface-derivatized with both electroactive and nonelectroactive self-assembled monolayers were synthesized. The surface-derivatized electroactive particles can be easily oxidized/reduced at an electrode surface based on the diffusion-controlled current-voltage curve observed in cyclic voltammetry measurements. Spectroelectrochemical investigation demonstrated that the maximum absorbance of the nanoparticles in their oxidized state red-shifted compared with their reduced state to a different extent according to their size distribution. In the case of the particles surface-derivatized with nonelectroactive monolayers, much less shift was observed. This study showed that surface plasmon absorbance of gold nanoparticles was not only related to core charge states but was also influenced by surface charge states as well.     

基于点击化学和活性自由基聚合方法制备双重响应金纳米粒子

采用点击化学和可逆加成断裂链转移活性自由基聚合方法制备了温度和pH双重响应的金纳米粒子. 通过红外光谱(FTIR)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)及热重分析(TGA)等方法对双重响应性金纳米粒子进行了表征. 该金纳米杂化粒子具有良好的分散性, 其表面接枝聚合物的密度约为0.6 Chain/nm2. 通过改变温度和pH条件, 考察了金纳米杂化粒子的可逆响应行为. 实验结果表明, 点击化学和可逆加成断裂链转移活性自由基聚合方法实现了金纳米粒子修饰的简单化、可控化以及功能化.