One-pot synthesis of thiazole-2-imine derivatives by CoFe2O4@SiO2-PA-CC-Guanidine-SA MNPs as an efficient and recyclable catalyst

A novel and atom-economic protocol for the synthesis of thiazole-2-imine derivatives was developed. Synthesis of thiazole-2-imine derivatives from primary amines, phenyl isothiocyanate and phenacyl bromide derivatives by the CoFe₂O₄@SiO₂-PA-CC-Guanidine-SA magnetic nanocatalyst in excellent yields was reported. This nanocatalyst is easily separated from the reaction mixture and can be reused for several times. For the characterization of the catalyst used of Fourier-transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and vibrating-sample magnetometry (VSM) techniques.     

Copper coordinated-poly(α-amino acid) decorated on magnetite graphene oxide as an efficient heterogeneous magnetically recoverable catalyst for the selective synthesis of 5- and 1-substituted tetrazoles from various sources: A comparative study

In this work, poly(α-amino acid)-Cu(II) complex immobilized on magnetite graphene oxide (GO/Fe₃O₄@PAA-Cu-complex) was prepared via a multistep synthesis and employed as an efficient, heterogeneous, magnetically recyclable nanocatalyst for one-pot, three component synthesis of 5- and 1-substituted tetrazoles using different substrates including benzaldehydes, benzonitriles, and anilines in mild conditions. The different approaches were mechanically investigated and compared. The catalyst was fully characterized by Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), energy dispersive X-ray spectroscopy (EDX), inductively coupled plasma (ICP), FE-SEM and TEM analyses. The magnetic nanocatalyst could be readily separated from the reaction mixture by an external magnet and reused for several times without significant loss of catalytic activity. Also, the spectroscopic analysis revealed the stability and durability of the catalyst. Finally, the chemoselectivity of the method was investigated by the various combinations of aldehyde, nitrile, and oxime.     

Anchoring Ni (II) on Fe3O4@tryptophan: A recyclable,green and extremely efficient magnetic nanocatalyst for one‐pot synthesis of 5‐substituted 1H‐tetrazoles and chemoselective oxidation of sulfides and thiols

A green, novel and extremely efficient nanocatalyst was successfully synthesized by the immobilization of Ni as a transition metal on Fe₃O₄ nanoparticles coated with tryptophan. This nanostructured material was characterized using Fourier transform infrared spectroscopy, transmission electron microscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, thermogravimetric analysis, inductively coupled plasma optical emission spectroscopy, vibrating sample magnetometry and X‐ray diffraction. The prepared nanocatalyst was applied for the oxidation of sulfides, oxidative coupling of thiols and synthesis of 5‐substituted 1H‐tetrazoles. The use of non‐toxic, green and inexpensive materials, easy separation of magnetic nanoparticles from a reaction mixture using a magnetic field, efficient and one‐pot synthesis, and high yields of products are the most important advantages of this nanocatalyst.     

Fe3O4@SiO2 nanoparticles–functionalized Cu(II) Schiff base complex with an imidazolium moiety as an efficient and eco-friendly bifunctional magnetically recoverable catalyst for the Strecker synthesis in aqueous media at room temperature

Cu(II) Schiff base complex supported on Fe₃O₄@SiO₂ nanoparticles was employed as a magnetic nanocatalyst (nanocomposite) with a phase transfer functionality for the one-pot preparation of α-aminonitriles (Strecker reaction). The desired α-aminonitriles were obtained from the reaction of aromatic or aliphatic aldehydes, aniline or benzyl amine, NaCN, and 1.6 mol% of the catalyst in water at room temperature and good to excellent yields were obtained for all substrates. The catalyst was characterized analytically and instrumentally including Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetric, nuclear magnetic resonance, energy-dispersive X-ray spectroscopy, inductively coupled plasma spectroscopy, vibrating-sample magnetometry analysis, dynamic light scattering, Brunauer–Emmett–Teller surface area, field emission scanning electron microscopy, and transmission electron microscopy analyses. The reaction mechanism was investigated, in which the performance of the catalyst as a phase transition factor seems to be probable. The catalyst showed high activity, high turnover frequency (TOF)s, significant selectivity, and fast performance toward the Strecker synthesis. The nanocatalyst can be readily and quickly separated from the reaction mixture with an external magnet and can be reused for at least seven successive reaction cycles without significant reduction in efficiency.     

Magnetic carbon nanotube as a highly stable and retrievable support for the heterogenization of sulfonic acid and its application in the synthesis of 2-(1H-tetrazole-5-yl) acrylonitrile derivatives

In the present study, a novel magnetic carbon nanotube functionalized by chlorosulfonicacid (Fe₃O₄-CNT-SO₃H) with nanotube morphology decorated by the spherical nanoparticles was prepared, characterized and introduced as a retrievable magnetic heterogeneous nanocatalyst for green synthesis a variety of 2-(1H-tetrazole-5-yl) acrylonitrile via multicomponent domino Knoevenagel condensation/ 1,3-dipolar cycloaddition reaction between aromatic aldehydes, malononitrile, and sodium azide under solvent free conditions. The catalyst was magnetically separated from the reaction system by an outer magnetic force and recycled up to five runs without a remarkable loss in its efficiency. The as-preparedacidic magnetic nanocomposite was characterized by different techniques inclusive Fourier transform infrared, thermogravimetric analysis, energy dispersive X-ray, field emission scanning electron microscopy, X-ray diffraction, vibrating sample magnetometry, CHNS elemental analysis, and acid-base titration. Easy workup, affordability, elimination of volatile and toxic solvents, and high yield of products are some merits of this protocol.     

Fe3O4‐Methylene diphenyl diisocyanate‐guanidine (Fe3O4–4,4′‐MDI‐Gn): A novel superparamagnetic powerful basic and recyclable nanocatalyst as an efficient heterogeneous catalyst for the Knoevenagel condensation and tandem Knoevenagel‐Michael‐cyclocondensation reactions

In this paper, guanidine groups (Gn) supported on modified magnetic nanoparticles (Fe₃O₄–4,4′‐MDI) were synthesized for the first time. The catalyst synthesized was characterized by various techniques such as SEM (Scanning Electron Microscopy), TEM (Transmission electron microscopy), XRD ( X‐ray Diffraction ), TGA (Thermogravimetric ananlysis), EDS ( Energy‐dispersive X‐ray spectroscopy ) and VSM (vibrating sample magnetometer). The catalyst activity of modified MNPs–MDI‐Gn, as powerful basic nanocatalyst, was probed through the Knoevenagel and Tandem Knoevenagel–Michael‐cyclocondensation reactions. Conversion was high under optimal conditions, and reaction time was remarkably shortened. This nanocatalyst could simply be separated and recovered from the reaction mixture by simple magnetic decantation and reused many times without significant loss of its catalytic activity. Also, the nanocatalyst could be recycled for at least seven (Knoevenagel condensation) and six (Knoevenagel and Tandem Knoevenagel–Michael‐cyclocondensation) additional cycles after they were separated by magnetic decantation and, washed with ethanol, air‐dried, and immediately reused.     

Trisaminomethane–cobalt complex supported on Fe3O4 magnetic nanoparticles as an efficient recoverable nanocatalyst for oxidation of sulfides and C–S coupling reactions

In this work, trisaminomethane–cobalt complex immobilized onto the surface of Fe₃O₄ magnetic nanoparticles was successfully prepared via a simple and inexpensive procedure. The prepared nanocatalyst was considered a robust and clean nanoreactor catalyst for the oxidation and synthesis of sulfides under green conditions. This ecofriendly heterogeneous catalyst was characterized by Fourier transform infrared spectroscopy, X-ray diffractometry, energy-dispersive X-ray spectroscopy, inductively coupled plasma-atomic emission spectroscopy, thermogravimetric analysis, vibrating sample magnetometry, X-ray mapping, scanning electron microscopy, and transmission electron microscopy techniques. Use of green medium, easy separation and workup, excellent reusability of the nanocatalyst, and short reaction time are some outstanding advantages of this method.     

Preparation of choline chloride–urea deep eutectic solvent‐modified magnetic nanoparticles for synthesis of various 2‐amino‐4H‐pyran derivatives in water solution

A novel hybrid magnetic nanocatalyst was synthesized by covalent coating of Fe₃O₄ magnetic nanoparticles with choline chloride–urea deep eutectic solvent using 3‐iodopropyltrimethoxysilane as a linker. The structure of this new catalyst was fully characterized via elemental analysis, transmission and scanning electron microscopies, X‐ray diffraction and Fourier transform infrared spectroscopy. It was employed in the synthesis of various 2‐amino‐4H ‐pyran derivatives in water solution via an easy and green procedure. The desired products were obtained in high yields via a three‐component reaction between aromatic aldehyde, enolizable carbonyl and malononitrile at room temperature. The employed nanocatalyst was easily recovered using a magnetic field and reused four times (in subsequent runs) with less than 8% decrease in its catalytic activity.     

Anchored complexes of Ni,Pt, and Pd on Fe3O4 nanoparticles as new and eco-friendly nanocatalysts in Suzuki and Heck coupling reactions

Abstract

Three recoverable nanocatalysts were developed by immobilizing Ni, Pt, and Pd Schiff-base complexes on the magnetite nanoparticles. Successful preparation of the nanocatalysts was evidenced by Fourier transform infrared (FT-IR) and energy dispersive X-ray (EDX) spectroscopy. Nano-sized spherical structure of the nanocatalysts was indicated by scanning electron microscopy (SEM). X-ray powder diffraction (XRD) determined that the crystalline cubic spinel structure of Fe₃O₄ remained constant through the synthesis of three complexes on Fe₃O₄ nanoparticles. Magnetic properties of the nanocatalysts were analyzed by the vibration sample magnetometer (VSM). Thermostability of the nanocatalysts was studied by thermogravimetric analysis (TGA). Metal loading of these nanocatalysts was evidenced by inductively coupled plasma atomic emission (ICP-AES).

Investigating the catalytic activity of these nanocatalysts in Suzuki and Heck reactions implicated that in the presence of Pd nanocatalyst coupling reactions proceeded efficiently. For Pt nanocatalyst, Suzuki reaction took place in longer time with moderate to good yield. For the Heck reaction, the desired products were achieved only for aryl iodide and some aryl bromides. The Ni nanocatalyst could just catalyze the Suzuki reaction.

Relying on the magnetic characteristic, these nanocatalysts could be simply recovered and reused several cycles without significant loss in catalytic activity.     

Magnetic carbon nanotube as a highly stable support for the heterogenization of InCl3 and its application in the synthesis of isochromeno[4,3-c]pyrazole-5(1H)-one derivatives

In the present study, a novel magnetically retrievable catalytic system involving indium nanoparticles on magnetic carbon nanotube (Fe₃O₄-CNT-In) was synthesized and characterized using various techniques, such as Fourier transform-infrared, thermogravimetric analysis, energy-dispersive X-ray analysis, vibrating-sample magnetometry1, X-ray diffraction, field emission-scanning electron microscopy and inductively coupled plasma-optical emission spectrometry. The catalytic activity of the synthesized nanocatalyst was evaluated in green synthesis of isochromeno[4,3-c]pyrazole-5(1H)-one derivatives from the reaction of ninhydrin and arylhydrazones under solvent-free conditions. The catalyst was magnetically separated from the reaction mixture using an external magnet and recovered for five cycles without an appreciable decrease in its catalytic efficiency. Performing the reactions in environmentally friendly and affordable conditions, the low catalyst percentage, high yield of products, short reaction times, large substrate scope and easy work-up are the merits of this protocol. Furthermore, four of the synthesized isochromeno[4,3-c]pyrazole-5(1H)-one derivatives are also new.     

Preparation of an organic–inorganic hybrid based on synergy of Brønsted and Lewis acid centres as heterogeneous magnetic nanocatalyst for ultrafast synthesis of acetaminophen

A heterogeneous nanocatalyst based on a Cu(II) complex containing phosphotungstic acid and N/O‐donor ligands supported on cobalt ferrite nanoparticles was successfully prepared. The synthesized nanocatalyst was characterized using various techniques. The magnetic nanocatalyst was examined as an efficient and synergistic catalyst for ultrafast synthesis of acetaminophen at room temperature and under solventless conditions. The examined synergistic nanocatalyst, which has both Lewis and Brønsted acidic sites, could be easily separated from the reaction system and reused several times without significant loss of its activity. The synthesized acetaminophen was also fully characterized.     

Enantioselective synthesis of 3‐amino‐1‐aryl‐1H‐benzo[f]chromene‐2‐carbonitrile derivatives by Fe3O4@PS‐arginine as an efficient chiral magnetic nanocatalyst

A novel chiral magnetic nanocatalyst was prepared by the surface modification of Fe₃O₄ magnetic nanoparticles (MNPs) with a chloropropylsilane and further by arginine to form Fe₃O₄@propylsilan‐arginine (Fe₃O₄@PS‐Arg). After the structural confirmation of Fe₃O₄@PS‐Arg synthesized MNPs by Fourier transform‐infrared, X‐ray diffraction, field emission‐scanning electron microscopy, transmission electron microscopy, vibrating‐sample magnetometry and thermogravimetric analyses, their catalytic activity was evaluated for one‐pot enantioselective synthesis of 3‐amino‐1‐aryl‐1H‐benzo[f]chromene‐2‐carbonitrile derivatives. The results showed that in the presence of 0.07 g Fe₃O₄@PS‐Arg nanocatalyst and ethanol as solvent, the best reaction yield (96%) was obtained in the least time (5 min). Easy operation, reusability and stability, short reaction time, high reaction yields and good enantioselectivity are the major advantages of the newly synthesized nanocatalyst. Also, this study provides a novel strategy for further research and investigation on the synthesis of new reusable enantioselective catalysts and chiral compounds.     

Isatin‐SO3H coated on amino propyl modified magnetic nanoparticles (Fe3O4@APTES@isatin‐SO3H) as a recyclable magnetic nanoparticle for the simple and rapid synthesis of pyrano[2,3‐d] pyrimidines derivatives

Isatin‐SO₃H coated on amino propyl modified magnetic nanoparticles (Fe₃O₄@APTES@isatin‐SO₃H) is found to be a novel, efficient, and reusable magnetic nanocatalyst, and characterized by FT‐IR, SEM, TEM, XRD, EDX, VSM, and TGA analysis. The magnetic nanocatalyst demonstrated outstanding performance in synthesis of pyrano[2,3‐d] pyrimidines derivatives via one‐pot three‐component reaction of various aromatic aldehydes 1, malononitrile 2, and barbituric acid 3 under reflux conditions in mixture of H₂O:EtOH (1:1) as solvent. Easy workup procedure, short reaction time, high yield, simple preparation and easy recovery of the catalyst, mild reaction conditions are some advantages of this work.     

Synthesis of 1-amidoalkyl-2-naphthol derivatives using a magnetic nano-Fe3O4@SiO2@Hexamethylenetetramine-supported ionic liquid as a catalyst under solvent-free conditions

Hexamethylenetetramine-functionalized silica-coated nano-Fe₃O₄ particles (MNPs@Hexamethylenetetramine) were prepared as a reusable heterogeneous catalyst using a facile process. The catalyst was synthesized and characterized using infrared, X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, and vibrating sample magnetometer. This magnetic nanocatalyst was employed as an efficient, reusable, and environmentally benign heterogeneous catalyst for the synthesis of amidoalkylnaphthol derivatives from a one-pot three-component condensation reaction of beta-naphthol, aldehydes, and amides in good to excellent yields, Moreover, this catalyst can be easily recovered by using a magnetic field and directly reused for at least seven runs without sign ificant loss of its activity.     

Immobilization of copper nanoparticles on WO3 with enhanced catalytic activity for the synthesis of 1,2,3-triazoles

In this study, a heterogeneous catalyst based on copper nanoparticles immobilized on metal oxide, WO₃, was fabricated using an impregnation method as an easy and straightforward nanoparticle synthesis strategy. The successful synthesis of the nanocatalyst was confirmed using various spectroscopic techniques such as X-ray diffraction, scanning electron microscopy, energy dispersive X-ray analysis, and transmission electron microscopy. The catalytic performance of the well-characterized material was evaluated through the azide–alkyne cycloaddition reaction (click reaction) in the aqueous medium. To optimize reaction conditions, different reaction parameters such as nanocatalyst amount, reaction time, temperature, and solvents were studied. Experimental results showed that as-prepared nanocatalyst (Cu/WO₃) could act as an effective and reusable heterogeneous catalyst in water for the synthesis of 1,2,3-triazoles in good-to-excellent yields. In addition, Cu/WO₃ has some advantages such as simple preparation procedure, easy separation, and recyclability for three runs with no remarkable loss of catalytic activity, which is essential from a catalytic application point of view.     

An efficient protocol for the one-pot multicomponent synthesis of polysubstituted pyridines by using a biopolymer-based magnetic nanocomposite

A biopolymer cellulose-based magnetic composite nanocatalyst was prepared and characterized by using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). Then, it was used efficiently in the multicomponent synthesis of polysubstituted pyridines under mild reaction conditions and using an easy work-up procedure at room temperature in ethanol. The nanocatalyst can be recovered easily and reused several times without significant loss of catalytic activity.     

One‐pot multicomponent synthesis of novel 2‐(piperazin‐1‐yl) quinoxaline and benzimidazole derivatives,using a novel sulfamic acid functionalized Fe3O4 MNPs as highly effective nanocatalyst

The immobilization of sulfonic acid on the surface of Fe₃O₄ magnetic nanoparticles (MNPs) as a novel acid nanocatalyst has been successfully reported. The morphological features, thermal stability, magnetic properties, and other physicochemical properties of the prepared superparamagnetic core–shell (Fe₃O₄@PFBA–Metformin@SO₃H) were thoroughly characterized using Fourier transform infrared (FTIR), X‐ray diffraction (XRD), energy‐dispersive X‐ray spectroscopy (EDS), field‐emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric analysis–differential thermal analysis (TGA‐DTA), atomic force microscopy (AFM), dynamic light scattering (DLS), Brunauer–Emmett–Teller (BET), and vibrating sample magnetometer (VSM) techniques. It was applied as an efficient and reusable catalyst for the synthesis of 2‐(piperazin‐1‐yl) quinoxaline and benzimidazole derivatives via a one‐pot multiple‐component cascade reaction under green conditions. The results displayed the excellent catalytic activity of Fe₃O₄@PFBA–metformin@SO₃H as an organic–inorganic hybrid nanocatalyst in condensation and multicomponent Mannich‐type reactions. The easy separation, simple workup, excellent stability, and reusability of the nanocatalyst and quantitative yields of products and short reaction time are some outstanding advantages of this protocol.     

Nano 5% Fe–ZnO: A highly efficient and recyclable heterogeneous solid nano catalyst for the Biginelli reaction

In this paper, we report the synthesis and catalytic application of 5% Fe–ZnO nanocatalyst for the synthesis of 3,4-dihydropyrimidin-2-one derivatives as a highly efficient heterogeneous nanocatalyst. The structural and morphological features of the synthesized nanocatalysts were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Using Debye-Scherer's formula, the average particle size for undoped ZnO was calculated to be 24.55 nm, while the average particle size for 5% Fe–ZnO was calculated to be 22.37 nm. The high resolution transmission electron microscopy (HR-TEM) revealed a hexagonal crystal lattice type. The Brunauer–Emmett–Teller (BET) surface area of ZnO and 5% Fe–ZnO was found to be 56.50 m²/g and 72.65 m²/g, respectively. Energy Dispersive X-Ray Analysis (EDX) confirmed the elemental composition of undoped ZnO and doped 5% Fe–ZnO nanocatalysts. Biginelli products were produced using a one-pot three-component reaction of urea, β-dicarbonyl compound, and various aromatic aldehydes using 5% Fe–ZnO under clean conditions. It was found that a 5% Fe–ZnO nanocatalyst is a highly efficient heterogeneous nanocatalyst for the synthesis of 3,4-dihydropirimidinones. ¹H NMR and ¹³C NMR analysis was used to confirm the structure of the synthesized Biginelli adducts. This synthetic protocol offers several advantages, including a short reaction time and purity of the synthesized, reusability and ease of catalyst separation, and a clean and quick workup.     

Synthesis and application of novel 1,2,3‐triazolylferrocene‐containing ionic liquid supported on Fe3O4 nanocatalyst in the synthesis of new pyran‐substituted Betti bases

A novel magnetic ferrocene‐labelled ionic liquid based on triazolium, [Fe₃O₄@SiO₂@Triazol‐Fc][HCO₃], has been synthesized and has been successfully introduced as a recyclable heterogeneous nanocatalyst. The catalytic activity of the novel magnetic nanoparticles was evaluated in the one‐pot three‐component synthesis of a wide variety of Betti bases. A simple, facile and highly efficient green method has been developed for the synthesis of kojic acid‐containing Betti base derivatives at room temperature. Additionally, this new protocol has notable advantages such as short reaction times, green reaction conditions, high yields and simple workup and purification steps. Also, the novel nanocatalyst could be easily recovered using an external magnetic field and reused for six consecutive reaction cycles without significant loss of activity. The newly synthesized nanocatalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy, field emission scanning electron microscopy, transmission electron microscopy and Brunauer–Emmett–Teller measurements.     

Cu(I)-anchored polyvinyl alcohol coated-magnetic nanoparticles as heterogeneous nanocatalyst in Ullmann-type C–N coupling reactions

In this paper, the preparation of a novel magnetic nanocatalyst (Fe₃O₄@PVA/CuCl) is described, which involves coating of polyvinyl alcohol (PVA) onto the surface of Fe₃O₄ nanoparticles and its subsequent coordination with CuCl catalyst. The nanocatalyst was characterized by various analytical methods, including Fourier-transform infrared, X-ray diffraction, inductively coupled plasma spectroscopy, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy, vibrating-sample magnetometry, and EDX elemental mapping. Moreover, the nanocatalyst was efficiently used in the N-arylation of amines via the formation of a carbon–nitrogen bond between the aryl halides and amines by Ullmann-type coupling reactions. The catalyst was sufficiently stable and can be reused for at least seven times in a model Ullmann reaction without remarkable alteration in its catalytic behavior. Heterogeneity of the catalyst was investigated by a hot filtration test.