The preparation of monodisperse polyacrylonitrile particles in the presence of AB block co-polymers of poly-2-vinylpyridine/poly tertbutylstyrene

Radical dispersion polymerisation of acrylonitrile in cyclohexane was performed in the presence of the diblock copolymer poly-2-vinylpyridine/poly tertbutylstyrene, giving polymer latex particles stabilised by surface layers of chains of poly tertbutylstyrene. A seeded polymerisation route was employed and the addition of up to a further seven feeds of reactants resulted in the particle growth and the total volume fraction of particles increased to 0.2. The effect of varying the molecular weight of the stabiliser and stabiliser concentration was also investigated. Particle diameter in the range 40–150 nm were obtained depending on the condition of the polymerisation.     

Interface stabilization and micelle formation in blends with a block copolymer

The phase separation behavior of ternary blends of two homopolymers, PMMA and PS, and a block copolymer of styrene and methylmethacrylate, P(S-b-MMA), was studied. The homopolymers were of equal chain length and were kept at equal amounts. Two copolymers were used with blocks of equal length, which exceeded or equaled that of the homopolymer chains. Varied was the copolymer contentf. Films were cast from toluene, which is a nonselective solvent. The morphologies of the cast films were compared with the structure of the critical fluctuations in solution, which were calculated in mean field approximation. The axis of blend compositionsf can be divided into parts of dominating macrophase and microphase separation. Above a transition concentrationf _o, all copolymer chains are found in phase interfaces. Belowf _o, part of them form micelles within the homopolymer phases.     

Geometrical constraints on microstructural development in block copolymer ultrathin films

The fact that microstructures form in microphase-separated block copolymers, endowing the materials with unique thermo-mechanical properties, is well-established. However, no thermodynamic theories directly address the problem of microstructural development in ultrathin films, which might be useful as adhesives or resists. To predict the microstructural dimensions in such films, a model based on unit-cell geometries and material/volume balances is developed. Predictions of the ratio of the characteristic length of the domain core to domain repeat distance are obtained for poly (styrene-butadiene) diblock (SB) copolymers at 298 K. The finite interphase region is included in the volume balances with the parameterf, the volume fraction of interphase material, obtained from a modified version of the Leary-Henderson-Williams thermodynamic theory and shown here not to be a strong function of composition. An approach, implementingf, for accurately estimating the critical molecular weight of microphase separation in the strong-segregation limit (M _c ), as a function of bulk composition for monodisperse SB copolymers at 298 K, is also presented.     

SAXS investigation on the influence of oil dilution on morphological changes in a SBS block copolymer during the first draw cycle

Spin-cast films of one pure SBS and two oil-extended SBS samples were observed during first cycle drawing in the synchrotron radiation beam at Hasylab. For evaluation, from a two-dimensional Vidicon scattering picture the scattering curve was extracted by intersecting perpendicular to the observed layer lines. Using a method described in a preceding paper [1], the scattering curve is analyzed by fitting to one-dimensional two-phase models. Essential for a fit with parameters of physical sense is the assumption of at least two components. One of these two main components is identified with fibrils containing PS cylinders, the axes of which are orientated parallel; the other is identified with fibrils containing cylinders transverse to the drawing direction.For the mechanical properties of the thermoplastic rubber this splitting of cylinder orientation in the drawn state seems to be of some importance. Only the cylinders of the longitudinal component turn out to be rigid, while the cylinders of the transversal component appear to yield and even break.The amount of cylinders allotted to each of the two components in the drawn state varies as a function of the diluent. An extrapolation of topological parameters back to the undrawn state indicates a possible reason, a fair variation of the cylindrical particle dimensions within a lattice cell of only slighly varying dimensions. While paraffinic mineral oil dilution causes the cylinders lengths to decrease, thus improving cylinder orientability within the pseudo lattice cell, aromatic oil dilution increases the particles diameters.A remaining faint contribution to the scattering pattern that produces the layer lines is suggested not to be caused by a periodic structure, but by a single and precisely defined polybutadiene matrix length (string) between two PS cylinders with a considerable height variance.     

Investigations of the influence on the phase morphology of PP-EPDM-blends on their mechanical properties

This work covers the dependence of the mechanical properties of polymer blends on their composition and their phase morphology. Blends of EPDM-elastomers and polypropylene were prepared covering the whole concentration range. The phase morphology was varied strongly by employing different mixing techniques and its morphology was characterized by means of electron microscopy and light microscopy, as well as by x-ray scattering and calorimetry.Mechanical properties such as the complex shear modulus, the tensile modulus as well as the stress strain behavior were investigated as a function of the composition of the blends and their phase morphology. The experimental finding is that the complex modulus, the tensile modulus, the yield stress, and the ultimate stress are rather insensitive with respect to the phase morphology and vary continuosly with the composition. The elongation at break, on the other hand, as well as the impact strength were found to depend on the phase morphology and to vary discontinously with the composition. One conclusion to be drawn is that one is not always forced to control the phase morphology tightly during processing in order to obtain materials with sufficiently good mechanical properties. Rather, simple theoretical approaches, neglecting details of the phase morphology are frequently able to satisfactorily predict mechanical properties of multiphase blends.     

Recovery of thermal and mechanical properties after thermal treatment in a polyester-based polyurethane

Solution casted films of segmented polyurethanes based on poly (ethylene adipate) glycol, 4,4diphenylmethanediisocyanate, and 1,4 butanediol were studied by thermal-mechanical methods including differential scanning calorimetry and mechanical hysteresis. Data demonstrate that, following thermal treatment at 70 °C for 15 min, these polymers show time-dependent thermal and mechanical properties. In fact, because 70 °C is a temperature greater than the melting point of soft segments (about 42 °C), the soft-segment crystals are melted and their crystallization is time dependent. The results are explained in terms of phase separation. In particular, the sample with better phase separation has a faster and larger recovery.     

Association of poly-(L-lysine) homologues in sodium carbonate solution

The molecular weights of isopoly(L-Iysine), poly(L-ornithine), and poly(L-, -diaminobutylic acid), the homologues of poly (L-lysine), were determined by the sedimentation equilibrium method in aqueous solutions of 1.0 M NaCl or 0.1 M Na₂CO₃. In every sample the molecular weights in the presence of carbonate ions was twice that in NaCl solution. In a previous paper we reported that poly(L-lysine) behaved as a dimer at concentrations higher than 0.4 g/dl in the presence of carbonate ions and as a monomer in dilute solution, and these two forms were related by a monomer-dimer equilibrium. The homologues did not have a monomer-dimer equilibrium relationship under the conditions of the measurements that we carried out. The CD spectrum of isopoly(L-lysine) in water showed a uniform increase with a decrease in the wave length in the presence of carbonate ions. However, in the alkaline region in NaOH solution, the spectrum changed and a small minimum at 212 nm was found. When additional carbonate ions were added a large minimum at 205 nm was observed. This result can be explained by a change in the conformation from a random coil to a regular structure. We could not compare isopoly(L-lysine) with other polypeptides, because it does not have peptide bonds. The CD spectra of poly(L-ornithine) and poly(L-, -diaminobutylic acid) in NaOH or Na₂CO₃ solutions showed only slightly regular structures. It was also confirmed that the dimer-structures of the poly (L-lysine) homologues do not have regular structures.This paper was presented at the VI. Symposium on Analytical Ultracentrifugation, Marburg, FRG, February 16–17,1989.     

Some structural and mechanical properties of bacterially produced poly-β-hydroxybutyrate-co-β-hydroxyvalerate

Some structural and mechanical properties of PHB homopolymer and copolymers containing 17 and 25–30% PHV have been investigated. X-ray scattering, optical microscopy, density measurements and differential scanning calorimetry were used to interpret the results of load-elongation curves and thermomechanical softening measurements.     

The rheological properties of concentrated cetyltrimethylammonium bromide-salicylic acid solutions in water

Data on the rheological properties of the hexadecyl-trimethylammonium salicylate system (CTAB-SA) in water are reported. Three concentrations were used (0.1, 0.01, and 0.001 M). For the highest concentration, the effect of temperature on the rheology was studied in detail.The rheology of the 0.1 M CTAB-SA solution indicates a very uniform micellar size. By contrast with concentrated polymethyl methycrylate dispersions studied by the author, there was a strong divergence between the viscosity-shear rate and viscosity-frequency data, although the plateau low shear rate and frequency values agreed over a wide range of temperature. This effect could be explained by a shear rate dependent diffusion constant. The large temperature variation of the plateau viscosity and elasticity modulus values could be explained by a combination of micellar number concentration and flexibility changes as the temperature varies.At lower concentrations, the rheological data shows evidence of polydispersity in micellar size. Strong shear thickening and extensional viscosity effects are also evident, probably due to micellar overlap and cluster formation in strong shear fields and the alignment of the very long micelles in elongational flow. The shear thickening effects take some 200 s to relax (0.01 M solution). Recovery of the elasticity after shearing the 0.1 M solution is rapid (a few hundred milliseconds).     

Gas permeability of block copolymers of styrene and butadiene

The permeability of styrene-butadiene block copolymer foils with different composition prepared by casting and pressing has been investigated for the gases Ar, CO₂, and CH₄ at pressure difference of 400 mbar and at the temperature range 298 T [K] 333.The permeation process can be described by the solution diffusion mechanism. The diffusion coefficients decrease in the sequence of the gases Ar, CO₂, and CH₄ and the solubility coefficients increase in the sequence Ar, CH₄, CO₂.The dependence of the permeability on the composition of the block copolymer can be interpreted by the help of percolation theory and the effective medium theory. It follows the critical volume fraction of the percolation of the transport phase _PB ^c (= 0,23) and the coordination numberz (= 4) giving an information concerning the multiphase structure of the block copolymer.Presented in part at the 33^rd Annual Meeting of the Colloid-Gesellschaft, Graz, Austria, September 14–16, 1987.     

Enthalpy relaxations in polymer blends and block copolymers: Influence of domain size

It is now well known that enthalpy relaxation measurements can be used to establish polymer-polymer blend phase behavior when the glass transition temperatures of the two polymers are virtually coincident. In the most simple cases, the aging kinetics of an immiscible blend will be representative of the pure polymers superimposed upon each other. However, in many cases the situation is more complicated because of the presence of interface material. In this paper the relation between enthalpy recovery peak separation, domain size and interface thickness is considered. The discussion is based on relaxation experiments involving di-block copolymers of styrene and 2-vinyl pyridine, blends of polystyrene and poly(2-vinyl pyridine) and blends of poly(vinyl chloride) and poly(isopropyl methacrylate). If the amount of material in the interface is too large due to either a small average domain size or a thick interface no peak separation will occur. The first situation is found for the microphase separated block copolymer system whereas the second possibility occurs for blends of polymers which are on the verge of miscibility like poly(vinyl chloride) and poly(isopropyl methacrylate).Presented in part at the Sixth International Seminar on Polymer Physics Relaxation in Polymers, Gomadingen, October 3–8, 1988, F.R.G.     

Amorphous solid-like distribution of polydisperse particles of colloidal clay and microcrystalline cellulose in deionized suspension

A metallurgical microscope is used to directly observe the amorphous solid-like structures of deionized suspensions of highly polydispersed colloids in sedimentation equilibrium. The colloids used are colloidal clay of bentonite and microcrystalline cellulose (MCC). The two-dimensional distance distribution functions of the amorphous solid-like structures at relatively diluted and concentrated suspensions resemble those of the liquid-like and gas-like structures of monodispersed spheres, respectively. The center-to-center interparticle distances (D) in the amorphous solid-like structures are explained by the effective hard-sphere model; a colloidal particle is coated with electrical double layers. The maximum length of the width of the double layers (Debye length,D ₁) observed is ca. 1n at very dilute suspensions.D andD ₁ continue to decrease as the initial concentration of the particles increases, and from these data rigidities are estimated to be 0.12 and 0.09 Pa for bentonite and MCC suspensions, respectively. The log [viscosity] of bentonite suspensions begins to increase linearly as log [shear rate] decreases with a slope close to –1, which supports the solid-like nature of the suspensions. These experimental results show that electrostatic interparticle repulsion and the elongated Debye-screening length around the particles are both essential for the appearance of the amorphous solid-like structures.     

An evaluation method for SAXS-patterns of fibrillar two-phase systems containing oriented particles of moderate anisotropy and short range correlation

Starting from the theoretical background of Rulands interface distributions, an evaluation method for small angle x-ray patterns arising from oriented fibrillar two-phase structures is proposed. If the fibril contains highly oriented particles with only moderate anisotropy and if the correlations between those particles within the fibril are of short range only, every axial section of the scattering pattern shows a one dimensional Porod law. A procedure of successive model confinement using the well known tools of nonlinear regression analysis is described. The result of such an analysis for the scattering pattern of an oil diluted SBS block copolymer recorded with synchrotron radiation under first-cycle stretching is reported. At=4 nm four contributions to the scattering pattern could be identified: a) fibrils containing well-defined cylinders standing upright; b) fibrils containing lying cylinders under destruction; c) stretched-out polybutadiene chains, connecting two polystyrene cylinders and causing the observable layer line pattern; and d) stretched-out polybutadiene chains looping through the neighboring PS domain and returning to their starting domain. In addition, a simple method for determining the height-to-diameter ratio of cylinders from the form factor envelope is proposed.     

Morphological changes in SBS block copolymers caused by oil extension as determined by absolute small angle x-ray scattering

A series of SBS block copolymers diluted with different amounts (0–60 wt%) of three different kinds of oil were investigated: 1) lithene PM (a low molecular weight polybutadiene); 2) a paraffinic mineral oil with its electron density close to that of the polybutadiene (PB) phase; 3) a highly aromatic mineral oil with an electron density close to the polystyrene (PS) phase. All the oils seem to go into the polybutadiene matrix. Paraffinic oil and lithene form a homogeneous phase with PB; the aromatic oil at low concentrations mixes with the PB phase with a high level of inhomogeneity, while at higher concentration partial phase separation occurs. In the undiluted polymer, styrene forms cylinders in hexagonal packing. The distance between cylinders (about 43 nm) is not significantly changed upon dilution up to 33 wt%. Previously proposed changes in the morphology of PS domains at larger oil contents can be related to observed changes in the long period, in the segment length distributions, and in the homogeneities of the phase (density fluctuations). The electron density difference obtained for pure SBS is lower than the theoretical one calculated from the densities of pure PS and pure PB. Dilution by paraffinic oil improves the phase separation.     

On the observation of micellar structures by dielectric spectroscopy

Many cationic surfactants form, in the presence of certain organic acids, large supramolecular micellar structures in water. The dielectric response of one such system (cetyl trimethyl ammonium bromide-salicylic acid, CTMAS) has been studied as a function of frequency, concentration and temperature. The results are compared with dynamic mechanical data on the same system, which has been published in the literature.The dielectric response shows that the micelles form a rigid, open network structure, which does not impede ionic transport in the bulk liquid. However, the response also shows the presence of a frequency dispersive barrier capacitance. From the variation of the properties of this capacitance with CTMAS concentration and applied voltage over a range of frequencies, it is deduced that the barrier originates in an ordered micelle structure at each electrode.     

Structure/performance relationships in long chain dimethylamine oxide/sodium dodecylsulfate surfactant mixtures

Dramatic differences in the structure of mixed micelles of long chain amine oxides and sodium dodecylsulfate are noted as a function of composition. In the L₁ micellar pseudophase, a sphere-to-rod transition driven by ion-dipole interactions between the dissimilar headgroups leads to synergisms in aqueous solution thickening, Ross-Miles foaming, and nonpolar oil solubilization. For example, an astounding seven orders of magnitude increase in the zero shear viscosity and viscoelastic properties are observed at a single total surfactant concentration. The sphere-to-rod transition can be viewed in FT-IR by examining both the CH₂ stretching for the methylene tails, and the S-O stretching modes for the sulfate headgroups.     

The complex rheological behavior of an aqueous cationic surfactant solution investigated in a Couette-type viscometer

In this paper the behavior of an aqueous surfactant solution in a rotational Couette viscometer is investigated. It is shown that this behavior depends strongly upon time, upon the way in which the flow curve is obtained (with increasing or decreasing shear rate), upon the temperature, and upon the concentration of the solution. Furthermore, the results also reveal a pronounced dependence upon the size of the actual measuring system used. It is shown that the slip-velocity concept is not applicable to explain this dependence.     

Morphology and mechanical properties of ultrahigh molecular weight polypropylene prepared by gelation/crystallization at various temperatures

Films of ultrahigh molecular weight (5.4×10⁶) polypropylene were produced by gelation/crystallization at various temperatures from dilute decalin solutions according to the method of Smith and Lemstra. The temperatures chosen were 20°, 30°, 50°, and 60°C. With increasing the temperature, the long period and crystallinity of the resultant gel film increased. By contrast, when the films were stretched up to 50 } 60 times, the increases in Young's modulus and crystallinity become more significant, as the temperature of the gelation/crystallization became lower. This interesting phenomenon is thought to be due to the dependence of the number of entanglements on the temperatures concerning gelation/crystallization and evaporation of solvent from the gel to form a film.