Structure and energetic properties of 1,5-dinitrobiuret

The two-dimensional potential energy scan shows that the pseudo-trans conformer of 1,5-dinitrobiuret (DNB) is the most stable form of isolated molecule, while the pseudo-cis conformer is about 7.5 kJ/mol higher in energy. Thus, the structure of gaseous DNB is different from that in crystal state, where the molecules have pseudo-cis conformation. The value of enthalpy of formation of gaseous DNB (?257 ± 5 kJ/mol) is calculated from isodesmic reactions using G4 energies. Combining this value with empirically estimated enthalpy of sublimation, the enthalpy of formation of crystal DNB is predicted to be ?415 ± 15 kJ/mol. The bond dissociation enthalpies are calculated for all bonds. The energy of the weakest N–NO₂ bonds is equal to 190–200 kJ/mol. Similar calculations were carried out for biuret. The gaseous biuret exists predominantly in the pseudo-trans form. The calculated enthalpy of formation of gaseous biuret agrees well with the experimental one. The correlation of calculated bond energies with corresponding bond distances and electron density is discussed for biuret and DNB.     

Thermochemistry and crystal lattice energetics of phenyl acridine-9-carboxylates and 9-phenoxycarbonyl-10-methylacridinium trifluoromethanesulphonates

The melting enthalpies and melting points of phenyl acridine-9-carboxylate, its eleven alkyl-substituted derivatives in the phenyl fragment and eight 9-phenoxycarbonyl-10-methylacridinium trifluoromethanesulphonates derived from them, were determined by DSC. The volatilisation enthalpies and temperatures of twelve phenyl acridine-9-carboxylates were either measured by DSC or obtained by fitting TG curves to the Clausius–Clapeyron relationship. For the compounds whose crystal structures are known, crystal lattice enthalpies were determined computationally as the sum of electrostatic, dispersive and repulsive interactions. By combining the enthalpies of formation of gaseous phenyl acridine-9-carboxylates or 9-phenoxycarbonyl-10-methylacridinium and trifluoromethanesulphonate ions, obtained by quantum chemistry methods, and the corresponding enthalpies of sublimation or crystal lattice enthalpies, the enthalpies of formation of the compounds in the solid phase were predicted. In the case of the phenyl acridine-9-carboxylates, the computationally predicted crystal lattice enthalpies correspond reasonably well to the experimentally obtained enthalpies of sublimation. Analysis of crystal lattice enthalpy contributions indicates that the crystal lattices of phenyl acridine-9-carboxylates are stabilised predominantly by dispersive interactions between molecules, whereas the crystal lattices of their quaternary salts are stabilised by electrostatic interactions between ions.     

Thermodynamic properties of polymorphic forms of theophylline. Part II: The enthalpies of solution in water at 298.15 K

The enthalpies of solution $ \Updelta_{sol}^{{}} H_{m}^{{}} $ of polymorphic forms I and II of theophylline in water at 298.15 K using the isoperibol solution calorimeter have been determined in the range of concentration (0.311–1.547) · 10^?3 /mol · kg^?1. The enthalpies of hydration $ \Updelta_{hyd}^{{}} H_{m}^{o} $ were determined from the experimentally obtained the enthalpies of solution for aqueous solutions and previously determined enthalpies of sublimation $ \Updelta_{s}^{g} H_{m}^{o} . $      

Lattice energetics and thermochemistry of phenyl acridine-9-carboxylates and 9-phenoxycarbonyl-10-methylacridinium trifluoromethanesulphonates

The melting points and melting enthalpies of nine phenyl acridine-9-carboxylates—nitro-, methoxy- or halogen-substituted in the phenyl fragment—and their 9-phenoxycarbonyl-10-methylacridinium trifluoromethanesulphonate derivatives were determined by DSC. The volatilisation temperatures and enthalpies of phenyl acridine-9-carboxylates were either measured by DSC or obtained by fitting TG curves to the Clausius–Clapeyron relationship. For the compounds whose crystal structures are known, crystal lattice energies and enthalpies were determined computationally as the sum of electrostatic, dispersive and repulsive interactions. By combining the enthalpies of formation of gaseous phenyl acridine-9-carboxylates or 9-phenoxycarbonyl-10-methylacridinium trifluoromethanesulphonate ions, obtained by the DFT method, and the corresponding enthalpies of sublimation and/or crystal lattice enthalpies, the enthalpies of formation of the compounds in the solid phase were predicted. In the case of the phenyl acridine-9-carboxylates, the computationally predicted crystal lattice enthalpies correspond reasonably well with the experimentally obtained enthalpies of sublimation. The crystal lattices of phenyl acridine-9-carboxylates are stabilised predominantly by dispersive interactions between molecules, whilst the crystal lattices of their quaternary salts are stabilised by electrostatic interactions between ions.     

Thermoanalytical and spectroscopic studies on different crystal forms of nevirapine

This study is aimed at exploring the utility of thermoanalytical methods in the characterization of various polymorphs and solvates of nevirapine. The different forms obtained by recrystallization of nevirapine from various solvents showed morphological differences in SEM. The presence of polymorphic forms is suggested by single sharp melting endotherm different from original sample in DSC and no mass loss in TG, while appearance of desolvation peak in TG indicated the formation of solvates. The higher desolvation temperatures of all the solvates than their respective boiling point indicate tighter binding of solvent. The changes in the crystal lattice were demonstrated by X-ray powder diffraction studies. The enthalpy of fusion rule indicated the existence of monotropy in polymorphic pairs I/O and II/O, while I/II is enantiotropically related. The enthalpy of solution, an indirect measure of the lattice energy of a solid, was well correlated with the crystallinity of all the solid forms obtained. The magnitude of ΔH _sol was found to be ?14.26  kJ mol^?1 for Form V and ?8.29  kJ mol^?1 for Form O, exhibiting maximum ease of molecular release from the lattice in Form V. The transition temperature was found to be higher than the melting of both the forms except for polymorphic pair I/II providing complementary evidence for the existence of monotropy as well as enantiotropy in these polymorphic pairs.     

Phase transition of syndiotactic polypropylene in electrospun nanofibers during progressive heating

By means of high-temperature electrospinning process, syndiotactic polypropylene (sPP) nanofibers with an average diameter of 127 nm were obtained using a rotating disc as a collector. The aligned fibers were subjected to progressive heating for fiber melting. During heating, structural evolution of the sPP nanofibers was investigated in situ by means of two-dimensional wide-angle and small-angle X-ray scattering with synchrotron radiation sources. It was found that the as-spun fibers consist of the antichiral form I (9 %), mesophase (31 %), and amorphous phase (60 %), in the absence of isochiral form II. Upon heating, the mesophase started to melt and completely disappeared at 90 °C. The melting of the mesophase directly produced amorphous chains at 35–60 °C, and brought up the isochiral form II at low temperatures (60–70 °C), as well as the antichiral form I at high temperatures (70–110 °C). These events were in accordance with the DSC heating curve, which exhibited a small endotherm centered at 52 °C for the mesophase melting, followed by a shallow and broad exotherm associated with two phase-transition events, i.e., the crystal reorganization and the crystallization of supercooled liquid. The former is likely due to the solid–solid transition of meso→II phase as suggested by Lotz et al. (Macromolecules 31:9253, 1998), and the latter is relevant with crystallization of amorphous chains to develop the thermodynamic stable form I phase at high temperatures.     

Thermochemistry of piperidine adducts of some bivalent transition metal bromides

The adducts [MBr₂(pipd) _n ] (where M = Mn(II), Fe(II), Co(II), Ni(II), Cu(II), or Zn(II); pipd = piperidine; n = 1/2, 1, or 3/4) were synthesized and characterized by melting points, elemental analysis, thermal studies, and IR and electronic spectroscopy. From calorimetric studies in solution, the standard enthalpies of formation and several other thermochemical parameters of them were determined. The mean standard enthalpies of the metal–nitrogen bonds were calculated, as well as the enthalpies of the adduct formation in the gaseous phase. Using the values obtained for the enthalpies of reaction, the acidity order of the salts is obtained: FeBr₂ > MnBr₂ and CoBr₂ > NiBr₂. Comparing with pyridine adducts, the ligand piperidine is more basic than the ligand pyridine: pipd > py.     

Theoretical prediction of enthalpies and temperatures of sublimation of organochlorine compounds including pesticides

Crystal lattice energies of several organochlorine compounds—including pesticides, of known crystal structures were calculated on the basis of a model which takes into account electrostatic, dispersive and repulsive interactions—using three different sets of empirical parameters. These characteristics compare reasonably with experimental heats of volatilization, and it was subsequently shown how statistical and classical thermodynamics can be employed to evaluate dependencies of function of states of gaseous and solid compounds on temperature and how enthalpies and temperatures of sublimation at standard pressure, as well as vapour pressurevs. temperature dependencies can be predicted.     

Standard Enthalpies of Formation for Some Semi-products At the Synthesis of Poly(ethylene) Terephthalate

The enthalpies of combustion for 4-formylbenzoic acid (I), 4-methylbenzyl alcohol (II), and trimethyl 1,2,4-benzenetricarboxylate (III) were determined by the bomb calorimetry method. Enthalpies of sublimation for I and II were measured with a calorimeter. The contributions of different substituents to the standard enthalpies of formation for benzene derivatives in the gas state were derived. This revised version was published online in July 2006 with corrections to the Cover Date.     

Twinning by merohedry in bis(4‐methoxyphenyl)tellurium(IV) diiodide dimethyl sulfoxide hemisolvate

Green crystals of the title compound, C₁₄H₁₄I₂O₂Te·0.5C₂H₆OS, space group P3₂, show twinning by merohedry (class II). The asymmetric unit contains two organotellurium molecules and one dimethyl sulfoxide (DMSO) molecule. The crystal structure displays secondary Te...I and Te...O(DMSO) bonds that lead to [(4‐MeOC₆H₄)₂TeI₂]₂·DMSO supramolecular units in which the two independent organotellurium molecules are bridged by the DMSO O atom. In addition to these secondary bonds, I...I interactions link translationally equivalent organotellurium molecules to form nearly linear ...I—Te—I...I—Te—I... chains. These chains are crosslinked, forming two‐dimensional arrays parallel to (001). The crystal packing consists of a stacking of these sheets, which are related by the 3₂ axis. This study describes an unusual dimeric arrangement of X—Te—X groups.     

Melting,volatilisation and crystal lattice enthalpies of acridin-9(10H)-ones

The enthalpies and temperatures of melting and sublimation of acridin-9(10H)-one, 10-methylacridin-9(10H)-one, 2,10-dimethylacridin-9(10H)-one, 10-methyl-2-nitroacridin-9(10H)-one, 10-ethylacridin-9(10H)-one and 10-phenylacridin-9(10H)-one were measured by DSC. Enthalpies and temperatures of volatilisation were also obtained by fitting TG curves to the Clausius-Clapeyron relationship. Complementary investigations for anthracene showed the extent to which the thermodynamic characteristics thus obtained compare with those determined by means of other techniques. For compounds whose crystal structures are known, experimental enthalpies of sublimation correspond reasonably well to crystal lattice enthalpies predicted theoretically as the sum of electrostatic, dispersive and repulsive interactions. Analysis of crystal lattice enthalpy contributions indicates that dispersive interactions always predominate. Interactions are enhanced in acridin-9(10H)-one where intermolecular hydrogen bonds occur: this is reflected in the relatively high enthalpy of sublimation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermodynamic properties of caffeine: Reconciliation of available experimental data

Molar enthalpies of sublimation of two crystal forms of caffeine were obtained from the temperature dependence of the vapour pressure measured by the transpiration method. A large number of primary experimental results on the temperature dependences of vapour pressure and phase transitions have been collected from the literature and have been treated in a uniform manner in order to derive sublimation enthalpies of caffeine at T = 298.15 K. This collection together with the new experimental results reported here has helped to resolve contradictions in the available sublimation enthalpies data and to recommend a consistent and reliable set of sublimation and formation enthalpies for both crystal forms under study. Ab initio calculations of the gaseous molar enthalpy of formation of caffeine have been performed using the G3MP2 method and the results are in excellent agreement with the selected experimental data.     

Studies concerning the accessibility of different allomorphic forms of cellulose

The supramolecular architecture and the morphological structure of cellulose play an important role in its accessibility. In order to evaluate the effect of the crystalline form of organization on the accessibility, we selected cellulosic materials with significant variations in the aforementioned characteristics. The assessment of the accessibility of cellulosic materials was performed experimentally through a water vapor sorption method. The kinetics and the thermodynamic parameters of water vapor sorption process were determined, and a correlation between the Flory–Huggins interaction parameters and the crystallinity index was derived. We concluded that the allomorph involving the most accessible crystal surfaces and amorphous regions was Cellulose II. The correlation of the accessibility values with those of the crystallinity index allowed us to evaluate the accessibility of the allomorphic forms of cellulose at different crystallinity indexes. The obtained experimental data allowed us to quantify the accessibility for crystal surfaces and amorphous regions of the different allomorphs in the order Cellulose II (38%) > Cellulose I (24%) > Cellulose III (10%).     

To understand the superior hydrolytic activity after polymorphic conversion from cellulose I to II from the adsorption behaviors of enzymes

The role of the cellulose ultrastructure on the relationship between cellulase binding and activity is not clear yet. In this article, a quartz crystal microbalance with dissipation (QCM-D) was employed to monitor the interactions between a given cellulase and the cellulose substrates with varied polymorphs of pure cellulose I and II and the intermediate state (I/II). Initially, cellulose nanocrystals (CNCs) with polymorphs of cellulose I, I/II and II were prepared and spin-coated on QCM sensors. The cellulose substrates’ crystallinity degree was examined by XRD, and morphology was detected by AFM. Then, a commercial cellulase from Trichoderma reesei was used to test the adsorption and hydrolysis of cellulose substrates with polymorphs of I, I/II and II, respectively. The results revealed that in the enzyme adsorption and desorption process at a temperature of 15 °C, CNC-II had the lowest adsorption capacity with a total adsorption mass of 179 ng cm^?2 but the highest reversible binding ratio of 33.7%; for comparison, the values were 235 ng cm^?2 versus 25.6% and 207 ng cm^?2 versus 26.9% for CNC-I and -I/II, respectively. And the conformation of adlayers on CNC-I, -I/II and -II derived from the QCM data became softer and softer in turn. On the other hand, CNC-II exhibited the best enzymatic hydrolytic ability among three substrates when enzymatic hydrolysis experiments were conducted at 45 °C. The results indicated that polymorphic conversion from I to II changes the affinity between the enzyme and cellulose surface; CNC-II has the lowest affinity to the enzyme, but the softer conformation of the adsorbed enzyme layer, and the more reversible adsorption may facilitate its hydrolytic activity. This article gives a perspective from the adsorption dynamics and conformation of the adsorbed enzyme layer, helping to understand the superior hydrolytic activity of cellulose with polymorph II. Thus, there is a potential of polymorphic conversion in the reduction of enzyme dosage and cost in the enzymatic hydrolysis process.     

Mononuclear copper(II) complexes of bis-triazole-based macrocyclic Schiff base hydrazones: direct synthesis,EPR studies,magnetic and thermal properties

Mononuclear copper(II) complexes of 1,2,4-triazole-based Schiff base macrocyclic hydrazones, III and IV, have been reported. The prepared amorphous complexes have been characterized by spectroscopic methods, electron spray ionization mass spectrometry, and elemental analysis data. Electrochemical studies of the complexes in DMSO show only one quasi-reversible reduction wave at +0.43 V (ΔE = 70 mV) and +0.42 V (ΔE = 310 mV) for III and IV, respectively, which is assigned to the Cu(II) → Cu(I) reduction process. Temperature dependence of magnetic susceptibilities of III and IV has been measured within an interval of 2–290 K. The values of χ_M at 290 K are 1.72 × 10^?3 cm³ mol^?1 and 1.71 × 10^?3 for III and IV, respectively, which increases continuously upon cooling to 2 K. EPR spectra of III and IV in frozen DMSO and DMF were also reported. The trend g_|| > g⊥ > g_e suggests the presence of an unpaired electron in the d_x2?y2 orbital of the Cu(II) in both complexes. Furthermore, spectral and antimicrobial properties of the prepared complexes were also investigated.     

Formation of a metastable phase induced by a liquid crystalline phase in a novel chloropoly(aryl ether ketone)

The phase transition behavior of a thermotropic liquid crystalline poly(aryl ether ketone) synthesized by nucleophilic substitution reactions of 4,4′‐biphenol (BP), and chlorohydroquinone (CH) with 1,4‐bis(4‐fluorobenzoyl)benzene (BF) has been investigated by differential scanning calorimetry (DSC) and wide angle X‐ray diffraction (WAXD). The copolymer exhibits multiple first order phase transitions, which are associated with crystal‐to‐smectic liquid crystal transition and smectic liquid crystal‐to‐isotropic transition. When the cooling rate is low (< 10°C/min), only stable crystal form I is formed. With the cooling rate being high (>20°C/min), the metastable crystal form II is formed, which always coexists with form I. The liquid crystalline phase plays an important role in the formation of metastable phase form II.     

Energetic study of bromobenzonitrile isomers: insights on the intermolecular interactions, aromaticity and electronegativity

The standard (p ^o = 0.1 MPa) molar enthalpies of formation, in the gaseous phase, of 2-, 3- and 4-bromobenzonitrile isomers were calculated from the combination of the following two parameters experimentally determined: the standard molar enthalpy of formation in the condensed phase, derived from the standard molar energy of combustion in oxygen at T = 298.15 K, measured by rotating-bomb combustion calorimetry, and the standard molar enthalpy of sublimation at the same reference temperature, derived from vapour pressure studies at several temperatures, as measured by mass-loss Knudsen effusion. The computational calculations complement the energetic study and analysis of the electron delocalization allows a comparison between the fluorine and bromine benzonitrile isomers. The harmonic oscillator model of aromaticity and nucleus-independent chemical shift aromaticity criteria and the natural bond orbital analysis were applied and related with the intramolecular enthalpic interactions. The intermolecular interactions in the crystal packing were analysed in terms of enthalpic and entropic contributions, using the crystallographic structures available in literature.     

The Standard Thermodynamic Properties of 4f Metal Dichlorides

The experimental data on heterogeneous and homogeneous equilibria with the participation of 4f metal dichlorides LnCl₂ (where Ln = La, …, Lu) were analyzed using the thermodynamic functions of these substances in the gaseous and condensed states described earlier. These data and appearance potential AP(Ln⁺/LnCl₂) measurements were used to calculate the enthalpies of sublimation Δ_sub H ₂₉₈ ^o . The enthalpies of atomization of these compounds under standard conditions were also calculated. Correlations between the enthalpies of sublimation and crystal lattice structure of 4f metal trifluorides, trichlorides, and dichlorides are described.     

The influence of the macroring structure on the enthalpies of solution of tetrapyridylporphyrin derivatives in water

The enthalpies of solution of 5,10,15,20-tetra(N-methylpyrid-4,3,2-yl)porphyrin tetraiodide were determined calorimetrically at 298.15 K. Changes in the position of the heteroatom in the pyridyl fragment of the substituted porphyrin (meta- and ortho- positions) substantially decreased the endothermic effect of solution compared with the para- isomer. This was related to changes in the energy of the molecular crystal lattice, which decreased in the series para- > meta- > ortho-isomer.     

Thermal behaviour on 2,2,2-Trinitroethyl-4,4,4-trinitrobutyrate

The enthalpies of the crystal transformation from I to II and from II to III and the melting enthalpy of 2,2,2-trinitroethyl-4,4,4-trinitrobutyrate (TNETB) are determined by means of Calvet microcalorimeter. On cooling, the supercooing from liquid to solid does not appear, and form II will transform to form I when 71.8° C is reached. The phase diagrams of TNETB-2,4,6-trinitrotoluene (TNT) and TNETB-polyester systems have been constructed by differential scanning calorimetry (DSC). The eutectic temperatures are 56° C and 34° C respectively. The compositions corresponding to the eutectic points are 52 and 46 weight percent TNETB respectively.