Thermal degradation kinetics of thermoresponsive poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) copolymers prepared via RAFT polymerization

Reversible addition-fragmentation chain transfer polymerization at 70 °C in N,N-dimethylformamide was used to prepare poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) copolymers in various compositions to afford well-defined polymers with pre-determined molecular weight, narrow molecular weight distribution, and precise chain end structure. The copolymer compositions were determined by ¹H NMR spectroscopy. The reactivity ratios of N-isopropylacrylamide (NIPAM) and N,N-dimethylacrylamide (DMA) were calculated as r _NIPAM = 0.838 and r _DMA = 1.105, respectively, by the extended Kelen–Tüdös method at high conversions. The lower critical solution temperature of PNIPAM can be altered by changing the DMA content in the copolymer chain. Differential scanning calorimetry and thermogravimetric analysis at different heating rates were carried out on these copolymers to understand the nature of thermal degradation and to determine its kinetics. Different kinetic models were applied to estimate various parameters like the activation energy, the order, and the frequency factor. These studies are important to understand the solid state polymer degradation of N-alkyl substituted polymers, which show great potential in the preparation of miscible polymer blends due to their ability to interact through hydrogen bonding.     

Synthesis, structural study and hydrolytic degradation of copolymer based on glycolic acid and bis-2-hydroxyethyl terephthalate

The current demand for environmentally degradable copolymers has initiated the use of novel degradable copolyesters. One of them is a copolyester based on poly(ethylene terephthalate-co-glycolic acid) (PET-GLA). The copolymer was synthesized by the melt reaction of bis-2-hydroxyethyl terephthalate (BHET) with glycolic acid (GLA) oligomers in the presence of Sb₂O₃ as a catalyst.Hydrolytic degradation of the copolymer was carried out in two buffered solutions at 45 °C: degradation was studied by incubating samples in powder form, in a concentrated solution from 30 to 150 days.The copolymer before and after degradation was characterized by means of different analytical techniques. ¹H and ¹³C NMR spectroscopy was used to confirm the incorporation of glycolide units in PET chains and to observe the structure and decomposition of the novel polyester. The thermal properties and morphology before and during the degradation were studied by scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and thermogravimetric (TG) analysis for determining melting points as well as melting and decomposition temperatures of investigated copolyester.     

Characterization and degradation of the poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymer

Poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymers (PSXE-g-PMMA) were prepared by condensation reaction of poly(methylphenylsiloxane)-containing epoxy resin (PSXE) with carboxyl-terminated poly(methyl methacrylate) (PMMA), and they were characterized by gel permeation chromatography (GPC), infrared (IR), and ²⁹Si and ¹³C nuclear magnetic resonance (NMR). The microstructure of the PSXE-g-PMMA graft copolymer was investigated by proton spin–spin relaxation T₂ measurements. The thermal stability and apparent activation energy for thermal degradation of these copolymers were studied by thermogravimetry and compared with unmodified PMMA. The incorporation of poly(methylphenylsiloxane) segments in graft copolymers improved thermal stability of PMMA and enhanced the activation energy for thermal degradation of PMMA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2521–2530, 1998     

An efficient approach to synthesize polysaccharides‐graft‐poly(p‐dioxanone) copolymers as potential drug carriers

Starch and poly(p‐dioxanone) (PPDO) are the natural and synthetic biodegradable and biocompatible polymers, respectively. Their copolymers can find extensive applications in biomedical materials. However, it is very difficult to synthesize starch‐graft‐PPDO copolymers in common organic solvents with very good solubility. In this article, well‐defined polysaccharides‐graft‐poly(p‐dioxanone) (SA_n‐PPDO) copolymers were successfully synthesized via the ring‐opening polymerization of p‐dioxanone (PDO) with an acetylated starch (SA) initiator and a Sn(Oct)₂ catalyst in bulk. The copolymers were characterized via Fourier transform infrared spectroscopy, ¹H NMR, gel permeation chromatography, thermogravimetric analysis (TG), differential scanning calorimetry, and wide angle x‐ray diffraction. The in vitro degradation results showed that the introduction of SA segments into the backbone chains of the copolymers led to an enhancement of the degradation rate, and the degradation rate of SA_n‐PPDO increased with the increase of SA wt %. Microspheres with an average volume diameter of 20 μm, which will have potential applications in controlled release of drugs, were successfully prepared by using these new copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5344–5353, 2009     

Preparation and characterization of poly(styrene-alt-maleic acid)-b-polystyrene block copolymer self-assembled nanoparticles

Block copolymers poly(styrene-alt-maleic anhydride)-b-polystyrene (P(St-alt-MAn)-b-PSt) were synthesized via radical addition fragmentation chain transfer copolymerization. The maleic anhydride-containing segments of the block copolymer were hydrolyzed to form amphiphilic poly(styrene-alt-maleic acid)-b-polystyrene (P(St-alt-MA)-b-PSt). In aqueous solution, P(St-alt-MA)₇₃-b-PSt₈₁ and P(St-alt-MA)₅₈-b-PSt₁₃₀ formed stable dispersed spherical aggregates of approximately 25 and 40 nm, respectively. Particle size was stable under alkaline conditions and was little affected by the polymer concentration in the range of 0.025–1.0 mg mL^?1. The critical aggregation concentrations of the block copolymer self-aggregates were 1?×?10^?3 and 3?×?10^?3 mg mL^?1 for hydrophobic PSt block lengths of 130 and 81 monomer units, respectively. The nanoparticles had a negative surface charge at pH?>?2. Scanning electron microscopy images revealed that particle–particle coalescence did not occur upon drying of the film and the nanoparticles remained discrete. Controlled aspirin release from the nanoparticles was dependent on the structure of the block polymers and release medium.     

Quantitative analysis of biodegradable amphiphilic poly(L-lactide)-block-poly(ethyleneglycol)-blockpoly(L-lactide) by using TG, FTIR and NMR

The thermogravimetric analysis (TG) of two series of tri-block copolymers based on poly(L,L-lactide) (PLLA) and poly(ethyleneglycol) (PEG) segments, having molar mass of 4000 or 600 g mol^–1, respectively, is reported. The prepared block copolymers presented wide range of molecular masses (800 to 47500 g mol^–1) and compositions (16 to 80 mass% PEG). The thermal stability increased with the PLLA and/or PEG segment size and the tri-block copolymers prepared from PEG 4000 started to decompose at higher temperatures compared to those copolymers from PEG 600. The copolymers compositions were determined by thermogravimetric analysis and the results were compared to other traditional quantitative spectroscopic methods, hydrogen nuclear magnetic resonance spectrometry (¹HNMR) and Fourier transform infrared spectrometry (FTIR). The PEG 4000 copolymer compositions calculated by TG and by ¹HNMR, presented differences of 1%, demonstrating feasibility of using thermogravimetric analysis for quantitative purposes.     

Synthesis and characterization of an environmentally friendly PHBV/PEG copolymer network as a phase change material

Novel environmentally friendly poly(hydroxybutyrate-co-hydroxyvalerate) and poly(ethylene glycol) (PHBV/PEG) copolymer networks were synthesized through free-radical solution polymerization with PHBV diacrylate (PHBVDA) and polyethylene glycol diacrylate (PEGDA) as macromers. The molecular structure of PHBV/PEG copolymer network was characterized by Fourier transform infrared (FT-IR) and ¹H nuclear magnetic resonance (¹H NMR). The morphology of the PHBV/PEG copolymer network was characterized by polarization optical microscopy. Thermal energy storage properties, thermal reliability and thermal stability were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis. The results indicated that the PHBV/PEG copolymer network hindered the growth of PEG crystalline segments or PHBV segments. PHBV/PEG copolymer network had a higher latent heat enthalpy, which didn’t reduce with the components of PHBV increased. Moreover, PHBV/PEG copolymer network still had good thermal stability even at 300 °C. These results suggested that such environmentally friendly copolymer network would have wide applications in phase change energy storage materials.     

The flame-retardant material - 1. Studies on thermal characteristics and flame retardance behavior of phosphorus-containing copolymer of methyl methacrylate with 2-methacryloxyethyl phenyl phosphate

2-Methacryloxyethyl phenyl phosphate/methyl methacrylate (MEPP/MMA) copolymers were synthesized by the bulk polymerization of MMA in the presence of various amounts of MEPP. MEPP was prepared by the esterification of phenyl dichlorophosphate with 2-hydroxyethyl methacrylate, followed by hydrolysis. Structural and compositional details of MEPP were obtained by Fourier transform infrared spectroscopy, ¹H nuclear magnetic resonance, ¹³C nuclear magnetic resonance, ³¹P nuclear magnetic resonance, and mass spectrometer, as well as by elemental analysis. The monomer reactivity ratios of MEPP/MMA system were calculated by the methods of Fineman-Ross, Kelen-Tüdös, and Joshi-Joshi. The thermal degradation temperature of the MEPP/MMA copolymers was considerably enhanced by only a slight decrease in T_g, as determined by differential scanning calorimetry and thermogravimetric analysis experiments. The fire-retardant properties of MEPP/MMA copolymers were also studied by LOI and UL-94 tests, indicating that an MEPP/MMA copolymer with only 2.17 wt% phosphorus can effectively inhibit burning.     

Structure and properties of new polyester elastomers composed of poly(trimethylene terephthalate) and poly(ethylene oxide)

Series of PTT-b-PEO copolymers with different composition of rigid PTT and PEO flexible segments were synthesized from dimethyl terephthalate (DMT), 1,3-propanediol (PDO), poly(ethylene glycol) (PEG, M_n = 1000 g/mol) in a two stage process involving transesterification and polycondensation in the melt. The weight fraction of flexible segments was varied between 20 and 70 wt%. The molecular structure of synthesized copolymers was confirmed by ¹H NMR and ¹³C NMR spectroscopy. The superstructure of these polymers was characterized by DSC, DMTA, WAXS and SAXS measurements. It was observed that domains of three types can exist in PTT-b-PEOT copolymers: semi-crystalline PTT, amorphous PEO rich phase (amorphous PEO/PTT blended phase) and semi-crystalline PEO phase. Semi-crystalline PEO phase was observed only at temperature below 0 °C for sample containing the highest concentration of PEO segment. The phase structure, thermal and mechanical properties are effected by copolymer composition. The copolymers containing 30÷70 wt% of PEO segment posses good thermoplastic elastomers properties with high thermal stability. Hardness and tensile strength rise with increase of PTT content in copolymers.     

Block copolymerization of methylmethacrylate via ATRP method using a macroinitiator produced by ring opening polymerization: Characterization,dielectric properties,and a kinetic investigation

Poly(2-(3-methyl-3-phenylcyclobutyloxirane-co-?-caprolactone) [P(PCBO-co-?-CL)] was synthesized by ring opening polymerization (ROP) of 2-(3-methyl-3-phenylcyclobutyloxirane and ?-caprolactone (?-CL) using benzyl alcohol as the initiator and Sn(Oc)₂ as the catalyst. To produce a macroinitiator from copolymer with hydroxyl end group was carried out reaction of acylation with choloroacetyl chloride. The molecular structures of copolymers were confirmed by FT-IR, ¹H-NMR spectroscopies and gel permeation chromatography (GPC). A kinetic series of methyl methacrylate (MMA) via ATRP method were studied in the presence of this macroinitiator and using CuBr/2,2′-bipyridine (bpy) as catalyst at 110°C. The kinetic study showed that the polymerization proceeded in a controlled way up to high conversions and the number-average molecular weight (M_n) increased depending on time. The thermal properties of copolymers were evaluated by TGA and DSC measurements. The temperature and frequency dependence of dielectric constant (?) and dielectric loss factor (?″) of P[(PCBO-co-?-CL)-b-PMMA] and that of doped with different concentration of EuCl₃ were investigated between the frequency of 100–2000 Hz and temperature range (300–430 K). Also, the ac conductivity has been measured to see the effect of frequency and temperature.     

Thermal stability of poly(mono-n-alkylitaconates) and mono-n-alkylitaconate-co-vinylpyrrolidone copolymers I

Poly(monoitaconates) containing octyl, decyl and dodecyl groups and random monoalkylitaconate-co-vinylpyrrolidone copolymers were studied by thermogravimetric analysis. Copolymers of mono-n-octylitaconate (MOI), mono-n-decylitaconate (MDI), and mono-n-dodecylitaconate (MDoI), respectively, with N-vinyl-2-pyrrolidone (VP) of different compositions were studied by dynamic thermogravimetric analysis. The thermal stability of the copolymers depends on the structure of the monoitaconate comonomer and on the composition of the copolymer The kinetic analysis of the degradation data shows that the thermal decomposition of these copolymers can be described by several kinetic orders depending on the copolymer and on the composition. The relative thermal stability of the copolymers increases as the VP content increases and as the length of the side chain of the itaconate increases, following the same trend as the flexibility of the copolymers in solution.     

Mechanical,aging, optical and rheological properties of toughening polylactide by melt blending with poly(ethylene glycol) based copolymers

Two novel biodegradable copolymers, including poly(ethylene glycol)-succinate copolymer (PES) and poly(ethylene glycol)-succinate-l-lactide copolymer (PESL), have been successfully synthesized via melt polycondensation using SnCl₂ as a catalyst. The copolymers were used to toughen PLA by melt blending. The DSC and SEM results indicated that the two copolymers were compatible well with PLA, and the compatibility of PESL was superior to that of PES. The results of tensile testing showed that the extensibility of PLA was largely improved by blending with PES or PESL. At same blending ratios, the elongation at break of PLA/PESL blends was far higher than that of PLA/PES ones. The elongation maintained stable through aging for 3 months. The moisture absorption of the blends enhanced due to the strong moisture absorption of PEG segments in PES or PESL molecules, which did not directly lead to enhance the hydrolytic degradation rate of the PLA. The PLA blends containing 20–30 wt% PES or PESL were high transparent materials with high light scattering. The toughening PLA materials could potentially be used as a soft biodegradable packaging material or a special optical material.     

Synthesis and properties of Pluronic-based pentablock copolymers with pendant amino groups

Amphiphilic Pluronic-based pentablock copolymers with pendant amino groups have been successfully synthesized via ring opening polymerization of γ-(carbamic acid benzyl ester)-ε-caprolactone (γCABεCL) and ε-caprolactone (εCL) using Pluronic F127 as macroinitiator and Sn(Oct)₂ as catalyst, and followed by hydrolysis of the Cbz protected groups under acidic conditions. The structure of the copolymer was confirmed by proton nuclear magnetic resonance (¹H NMR) and Fourier transform infrared spectroscopy spectra. In addition, gel permeation chromatography results demonstrated that the synthetic copolymer had a single and symmetrical peak. Moreover, the crystallinity and hydrophilicity could be well adjusted by the content of the functionalized monomer. Successful formation of aggregates was demonstrated by fluorescence method and transmission electron microscopy revealed that the micelles had a spherical morphology and the size was on nano scale according to the laser particle sizer results. The polymeric micelles had no obvious cytotoxicity even the micelles concentration reached 500 mg/L. Thus the Pluronic-b-poly(γ-amino-ε-caprolactone-co-ε-caprolactone) copolymers have great potential for the use in the biomedical fields.     

Biodegradable poly(sebacic anhydride-co-caprolactone) multi-block copolymers: Synthesis, characterization, crystallinity and crystalline morphology

Biodegradable poly(sebacic anhydride-co-caprolactone) (PSA-co-PCL) multi-block copolymers were prepared by condensation of acylated PSA and PCL prepolymers with different weight ratios. The homopolymer and copolymers were characterized by ¹H-NMR, gel permeation chromatography (GPC), differential scanning calorimeter (DSC) and atom force microscope (AFM). ¹H-NMR and GPC has indicated the formation of PSA-co-PCL multi-block copolymers, in which PSA and PCL segments are randomly distributed. The incorporation of PCL segments into the molecule chains even at a content of 20 wt% could significantly decrease the molecular weight distribution of the copolymer and increase its weight average molecular weight, as compared with PSA homopolymer. DSC has revealed that the melting temperature and degree of crystallinity for both SA and CL components are strongly composition dependent, implying the hindrance effect of the two components on crystallinity of each other. AFM observation has shown the difference in crystalline structures between PSA and PCL phases in the copolymers. In-vitro degradation tests performed at 37 °C in PBS buffer solution (pH 7.4, 0.1 M) have demonstrated the acceleration of degradation rate of the sample with increasing SA content in the copolymer.     

Homopolymer and copolymers of 4-nitro-3-methylphenyl methacrylate with glycidyl methacrylate: Synthesis, characterization, monomer reactivity ratios and thermal properties

The novel methacrylic monomer, 4-nitro-3-methylphenyl methacrylate (NMPM) was synthesized by reacting 4-nitro-3-methylphenol dissolved in ethyl methyl ketone (EMK) with methacryloyl chloride in the presence of triethylamine as a catalyst. The homopolymer and copolymers of NMPM with glycidyl methacrylate having different compositions were synthesized by free radical polymerization in EMK solution at 70 ± 1 °C using benzoyl peroxide as free radical initiator. The homopolymer and the copolymers were characterized by FT-IR, ¹H NMR and ¹³C NMR spectroscopic techniques. The solubility tests were tested in various polar and non-polar solvents. The molecular weight and polydispersity indices of the copolymers were determined using gel permeation chromatography. The glass transition temperature of the copolymers increases with increase in NMPM content. The thermogravimetric analysis of the polymers performed in air showed that the thermal stability of the copolymer increases with NMPM content. The copolymer composition was determined using ¹H NMR spectra. The monomer reactivity ratios were determined by the application of conventional linearization methods such Fineman-Ross (r₁ = 1.862, r₂ = 0.881), Kelen-Tudos (r₁ = 1.712, r₂ = 0.893) and extended Kelen-Tudos methods (r₁ = 1.889, r₂ = 0.884).     

Synthesis of novel crosslinkable polymers by atom transfer radical polymerization of cardanyl acrylate

In this work, the successful application of atom transfer radical polymerization (ATRP) to cardanyl acrylate, a polymerizable monomer derived from a renewable resource cardanol, is reported. Polycardanyl acrylate and poly(methylmethacrylate)‐cardanyl acrylate copolymers were prepared in bulk ATRP, using Copper(I) bromide/N, N, N′, N′, N″‐pentamethyl diethylene triamine (PMDETA) catalyst system at 95 °C in combination with ethyl‐2‐bromo isobutyrate initiator. The copolymers had mol. wt. (M_n) in the range 8300–2400 g/mol and polydispersity index (PDI) 1.27–2.00, depending upon the [M]₀/[I]₀ ratio. ¹H NMR analysis of the copolymer showed that unsaturation in the side chain of cardanyl acrylate is unaffected under the conditions of ATRP. This was further confirmed by studying the curing reaction of polycardanyl acrylate by supported dynamic mechanical thermal analysis (DMTA) in dual cantilever mode. The thermogravimetric analysis shows that the copolymers have improved thermal stability, by about 35 °C, in comparison with pure PMMA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5953–5961, 2005     

The Influence of Copolymerization Condition on Rheology,Morphology and Thermal Behavior of Polypropylene Heterophasic Copolymers

In this work, the polypropylene impact copolymers were synthesized by a modified sequential polymerization process. The copolymerization of ethylene and propylene was carried out between two homopolymerization stages at two different pressures and temperatures and the rheology, morphology and thermal properties of reactor alloys were studied. It is found that the ethylene propylene rubber (EPR) content increased up to 32 wt% by increasing the copolymerization time to 20 min. At a fixed copolymerization time of 10 min, the addition of 50 ppm hydrogen (H₂), increased the EPR content from 9.7 to 12.8 wt%. By doubling H₂ concentration, no considerable change in EPR wt% was observed. It is found that the zero shear viscosity of the alloys is significantly under the influence of EPR wt%, not the molecular weight of matrix. The molecular weight of PP matrices determined by rheological data, mildly decreased from 463000 to 458000 g/mol by increasing the copolymerization time from 10 min to 15 min. At high copolymerization time/high H₂ concentration, a melting peak in the differential scanning calorimetry test around 165°C for isotactic PP and also an endothermic peak around 127°C for the block copolymer with long ethylene segments, is observed. The study of interfacial strength by theoretical emulsion models showed that 15 min copolymerization time is optimum considering EPR wt%.     

Studies on the degradation of poly(L-lactide-r-trimethene carbonate) copolymers

Biodegradable poly(L-lactide-r-trimethene carbonate) copolymers (P(LLA-co-TMC)) with different compositions were synthesized. The degradation of the copolymers was carried out in phosphate buffer saline solutions (pH = 7.4) at 37 °C. The compositions, structure and properties of the copolymers in degradation were characterized with ¹H-NMR, DSC, XRD, GPC, and SEM. The weight loss of the P(LLA-co-TMC) 50/50 was much faster than that of P(LLA-co-TMC) 85/15 and PLLA homopolymer. Interestingly, though the molecular weight of the compolymers decreased greatly during degradation, the compositions were rarely varied. After long time degradation, the PLLA segments were induced to crystallize in the P(LLA-co-TMC) 85/15 copolymer. The SEM observation of the surface and cross-section of P(LLA-co-TMC) 85/15 copolymer films found it was similar to the bulk degradation of PLLA homopolymer.     

Effect of LiClO4 Salt on Dielectric Properties of Acrylonitrile-Methyl Methacrylate and Acrylonitrile-Isobutyl Methacrylate Copolymers

Poly(acrylonitrile-co-isobutyl methacrylate), PAN-co-PIBMA, and poly(acrylonitrile-co-methyl methacrylate), PAN-co-MMA copolymers are synthesized by emulsion polymerization. The structural characterization is done by FTIR and ¹H-NMR spectroscopy and thermal analyses are performed by thermogravimetric analysis (TGA). After various amounts of LiClO₄ salt loading into copolymer films, the dielectric properties of these films at different temperatures and frequencies are determined. The effects of different methacrylate groups and salt content on the dielectric properties of copolymers are investigated. It is found that the dielectric constant increases systematically with increasing MMA and IBMA content in the copolymer. The samples with higher salt content show higher ac-conductivities.     

Thermal stability of copolymers of vinyl acetate and methyl acrylate

The thermal degradation of a series of copolymers of vinyl acetate and methyl acrylate and the two homopolymers poly(vinyl acetate) and poly(methyl acrylate) obtained using Ce(IV) as initiator has been investigated using differential thermal analysis (DTA) and thermogravimetry (TGA) in dynamic nitrogen. The kinetic parameters E, n, and A have been obtained following several methods of thermogravimetric analyses. The stability increases as the methyl acrylate content in the copolymer composition increases. The incorporation of 5 mol % of vinyl acetate in the copolymer produces a marked decrease in stability compared to the homopolymer poly(methyl acrylate). There is evidence for an intramolecular lactonization process in vinyl acetate—methyl acrylate copolymers.