扑翼柔性及其对气动特性的影响

以往对扑翼气动特性的研究基本上都是基于简单的匀速刚性模型,但是通过大量观察不同飞鸟的扑翼动作发现,该模型与鸟翼的实际扑动还有很大差别。鸟翼不但上扑段和下扑段所需时间不同,而且在扑动过程中,鸟翼的形状无论沿弦向或展向都存在着相当大的柔性变形。本文在原有匀速刚性模型的基础上,加入了扑动速率变化和形状变化的影响,得出新的变速柔性扑翼分析模型,使之更接近鸟翼柔性扑动的真实情况。通过对比计算发现,柔性变形对扑翼的升力与推力都有着显著影响,如果控制得当,柔性变形能大大改善扑翼的气动性能。     

Bond graph modeling of a typical flapping wing micro-air-vehicle with the elastic articulated wings

In the present research, a new comprehensive model of a flexible articulated flapping wing robot using the bond graph approach is presented. The flapping kinematics of a two-section wing is introduced via the bond graph based approach on a hybrid mechanism providing amplitude and phase characteristics. The aerodynamic quasi-steady approach equipped with stall correlation is utilized according to the reduced flapping frequency and the angle of attack ranges. The local flow velocity and the wing position are calculated in both wing and body coordinates taking into account rotation and translation of the wing different parts. Estimation of the effective angle of attack is performed by calculating the instantaneous torque distribution on both wing sections. Aeroelastic modeling is employed in which the wing structure is assumed as an elastic Euler–Bernoulli beam at the leading edge with three linear torsional modes. In this novel integrated bond graph model, computation of the performance indices including the average lift and thrust, consumed and produced powers by flapping and mechanical efficiency are presented. Due to existence of the numerous geometric and kinematic parameters in articulated flexible flapping wing, such a model is essential for design and optimization. Consequently, an example of a typical parametric study and the results validation are carried out. It is indicated that the sensitivity of the bird performance to relative change in design variables would increase for out of phase flapping, second part stiffness, flapping amplitude, frequency and velocity respectively. It is interesting that by employing the reverse-phase flapping which is possible only via articulated wings, the maximum efficiency could be achieved. In addition, it is shown that adjusting the wing torsional stiffness is a crucial item in design of passive flapping robots. The key advantage of the two-section flapping wing is depicted as the controlling capability of the angle of attack in the outer part of the wing. Finally, the improved version of the bird is being addressed by approximately 15% progress in propulsive efficiency.

     

Vortical structures on a flapping wing

A wing in the form of a rectangular flat plate is subjected to periodic flapping motion. Space–time imaging provides quantitative representations of the flow structure along the wing. Regions of spanwise flow exist along the wing surface; and depending on the location along the span, the flow is either toward or away from the tip of the wing. Onset and development of large-scale, streamwise-oriented vortical structures occur at locations inboard of the tip of the wing, and they can attain values of circulation of the order of one-half the circulation of the tip vortex. Time-shifted images indicate that these streamwise vortical structures persist over a major share of the wing chord. Space–time volume constructions define the form and duration of these structures, relative to the tip vortex.     

N-S方程数值研究翼型对微型扑翼气动特性的影响

首先基于嵌套网格发展了一套适用于三维扑翼研究的非定常雷诺平均Navier-Stokes(RANS)方程数值模拟方法.为了解决微型扑翼在低马赫数下的收敛问题,使用了预处理方法,湍流模型为BL模型.在该方法的基础上,保持状态参数和扑翼表面形状一定的情况下,分别研究了一系列不同厚度、不同弯度的翼型对于微型扑翼气动特性的影响....     

前后双扑翼水平距离及相位差对其气动性能的影响

通过在动态网格上求解Navier-Stokes方程,对前后双扑翼的非定常粘性流场进行了数值模拟和气动干扰分析,考察了前后翼不同水平距离和不同相位差对其气动力和气动效率的影响。结果表明,扑动前翼和静止后翼间的气动干扰在各种不同水平距离下都有利于气动特性的改善,但气动干扰的作用随着前后翼水平距离的增大而减弱;前后双翼扑动的相位差是影响气动性能的重要参数,两翼间的气动干扰是否有利则与相位差和水平距离有直接联系。     

Effect of spanwise flexibility on flapping wing propulsion

A water tunnel study of the effect of spanwise flexibility on the thrust, lift and propulsive efficiency of a rectangular wing oscillating in pure heave has been performed. The thrust and lift forces were measured with a force balance, and the flow field was measured with a Particle Image Velocimetry system. Introducing a degree of spanwise flexibility was found to be beneficial. For Strouhal numbers greater than 0.2, a degree of spanwise flexibility was found to yield a small increase in thrust coefficient, and a small decrease in power-input requirement, resulting in higher efficiency. In this case, a moderately stronger trailing-edge vortex system was observed. Introducing a far greater degree of spanwise flexibility, however, was found to be detrimental. A large phase delay of the wing tip displacement was observed, leading to the root and tip moving in opposite directions for a significant portion of the flapping stroke. Vorticity of opposing sign was observed to be shed from the root and tip, resulting in a weak and fragmented vorticity pattern. The thrust coefficient was observed to be significantly reduced, and the efficiency diminished. It is noted that the range of Strouhal numbers for which spanwise flexibility was found to offer benefits overlaps the range found in nature, of 0.2<Sr<0.4. From a design aspect, flexibility may benefit flapping-wing Micro Air Vehicles both aerodynamically and in the inherent lightness of flexible structures.     

Experimental investigation of a flapping wing model

The main objective of this research study was to investigate the aerodynamic forces of an avian flapping wing model system. The model size and the flow conditions were chosen to approximate the flight of a goose. Direct force measurements, using a three-component balance, and PIV flow field measurements parallel and perpendicular to the oncoming flow, were performed in a wind tunnel at Reynolds numbers between 28,000 and 141,000 (3–15 m/s), throughout a range of reduced frequencies between 0.04 and 0.20. The appropriateness of quasi-steady assumptions used to compare 2D, time-averaged particle image velocimetry (PIV) measurements in the wake with direct force measurements was evaluated. The vertical force coefficient for flapping wings was typically significantly higher than the maximum coefficient of the fixed wing, implying the influence of unsteady effects, such as delayed stall, even at low reduced frequencies. This puts the validity of the quasi-steady assumption into question. The (local) change in circulation over the wing beat cycle and the circulation distribution along the wingspan were obtained from the measurements in the tip and transverse vortex planes. Flow separation could be observed in the distribution of the circulation, and while the circulation derived from the wake measurements failed to agree exactly with the absolute value of the circulation, the change in circulation over the wing beat cycle was in excellent agreement for low and moderate reduced frequencies. The comparison between the PIV measurements in the two perpendicular planes and the direct force balance measurements, show that within certain limitations the wake visualization is a powerful tool to gain insight into force generation and the flow behavior on flapping wings over the wing beat cycle.     

Experimental study of wings undergoing active root flapping and pitching

This paper presents the results of experiments carried out on mechanical wings undergoing active root flapping and pitching in the wind tunnel. The objective of the work is to investigate the effect of the pitch angle oscillations and wing profile on the aerodynamic forces generated by the wings. The experiments were repeated for a different reduced frequency, airspeed, flapping and pitching kinematics, geometric angle of attack and wing sections (one symmetric and two cambered airfoils). A specially designed mechanical flapper was used, modelled on large migrating birds. It is shown that, under pitch leading conditions, good thrust generation can be obtained at a wide range of Strouhal numbers if the pitch angle oscillation is adjusted accordingly. Consequently, high thrust was measured at both the lowest and highest tested Strouhal numbers. Furthermore, the work demonstrates that the aerodynamic forces can be sensitive to the Reynolds number, depending on the camber of the wings. Under pitch lagging conditions, where the effective angle of attack amplitude is highest, the symmetric wing was affected by the Reynolds number, generating less thrust at the lowest tested Reynolds value. In contrast, under pure flapping conditions, where the effective angle of attack amplitude was lower but still significant, it was the cambered wings that demonstrated Reynolds sensitivity.     

Effects of mass and chordwise flexibility on 2D self-propelled flapping wings

A self-propelled flexible flapping wing 2D numerical model undergoing a combined pitching and heaving motion is presented. Since such freely moving foil experiences zero net thrust, a definition of efficiency for this kind of problem is proposed and discussed against other formulations found in the literature. It is also shown that the deviation motion of wings such as that found in natural flyers is likely a consequence of the fluid–structure dynamics of the wings. The passive deviation motion observed in numerical simulations is either a consequence of a feathering mechanism referred to as rigid feathering or of the inertial displacement caused by the wing deformation. The effects of flexibility on the performance of the wing are also presented. It is found that flexibility may significantly enhance the efficiency in pressure-driven deformation cases. The rigid feathering mechanism is found to have an effect similar to that of the feathering caused by wing flexibility on the performances of pressure-driven deformation cases.     

A simulation-based study on longitudinal gust response of flexible flapping wings

Winged animals such as insects are capable of flying and surviving in an unsteady and unpredictable aerial environment. They generate and control aerodynamic forces by flapping their flexible wings. While the dynamic shape changes of their flapping wings are known to enhance the efficiency of their flight, they can also affect the stability of a flapping wing flyer under unpredictable disturbances by responding to the sudden changes of aerodynamic forces on the wing. In order to test the hypothesis, the gust response of flexible flapping wings is investigated numerically with a specific focus on the passive maintenance of aerodynamic forces by the wing flexibility. The computational model is based on a dynamic flight simulator that can incorporate the realistic morphology, the kinematics, the structural dynamics, the aerodynamics and the fluid–structure interactions of a hovering hawkmoth. The longitudinal gusts are imposed against the tethered model of a hovering hawkmoth with flexible flapping wings. It is found that the aerodynamic forces on the flapping wings are affected by the gust, because of the increase or decrease in relative wingtip velocity or kinematic angle of attack. The passive shape change of flexible wings can, however, reduce the changes in the magnitude and direction of aerodynamic forces by the gusts from various directions, except for the downward gust. Such adaptive response of the flexible structure to stabilise the attitude can be classified into the mechanical feedback, which works passively with minimal delay, and is of great importance to the design of bio-inspired flapping wings for micro-air vehicles.     

Experimental investigation of the effect of chordwise flexibility on the aerodynamics of flapping wings in hovering flight

Ornithopters or mechanical birds produce aerodynamic lift and thrust through the flapping motion of their wings. Here, we use an experimental apparatus to investigate the effects of a wing's twisting stiffness on the generated thrust force and the power required at different flapping frequencies. A flapping wing system and an experimental set-up were designed to measure the unsteady aerodynamic and inertial forces, power usage and angular speed of the flapping wing motion. A data acquisition system was set-up to record important data with the appropriate sampling frequency. The aerodynamic performance of the vehicle under hovering (i.e., no wind) conditions was investigated. The lift and thrust that were produced were measured for different flapping frequencies and for various wings with different chordwise flexibilities. The results show the manner in which the elastic deformation and inertial flapping forces affect the dynamical behavior of the wing. It is shown that the generalization of the actuator disk theory is, at most, only valid for rigid wings, and for flexible wings, the power P varies by a power of about 1.0  of the thrust T. This aerodynamic information can also be used as benchmark data for unsteady flow solvers.     

Towards simulation of flapping wings using immersed boundary method

In this work the immersed boundary method is applied to simulate incompressible turbulent flows around stationary and moving objects. The goal is to demonstrate that the immersed boundary technique along with a large eddy simulation approach is capable of simulating the effect of the so‐called leading edge vortex (LEV), which can be found in flapping wing aerodynamics. A Lagrangian method is used to approximate the solutions in the freshly cleared cells that lay within solid objects at one time step and emerge into fluid domain at the next time step. Flow around a stationary cylinder at Re_D = 20, 40, and 3900 (based on cylinder diameter D) is first studied to validate the immersed boundary solver based on the finite volume scheme using a staggered grid. Then, a harmonically oscillating cylinder at Re_D = 10 000 is considered to test the solver after the Lagrangian method is implemented to interpolate the solution in the freshly cleared cells. Finally, this approach is used to study flows around a stationary flat‐plate at several angles of attack and fast pitching flat‐plate. The rapidly pitching plate creates a dynamic LEV that can be used to improve the efficiency of flapping wings of micro air vehicle and to determine the optimum flapping frequency. Copyright © 2012 John Wiley & Sons, Ltd.     

Motion visualization and estimation for flapping wing systems

Studies of fluid-structure interactions associated with flexible structures such as flapping wings require the capture and quantification of large motions of bodies that may be opaque. As a case study, motion capture of a free flying Manduca sexta, also known as hawkmoth, is con-sidered by using three synchronized high-speed cameras. A solid finite element (FE) representation is used as a reference body and successive snapshots in time of the displacement fields are reconstructed via an optimization procedure. One of the original aspects of this work is the formulation of an objective function and the use of shadow matching and strain-energy regularization. With this objective function, the authors penalize the projection differences between silhou-ettes of the captured images and the FE representation of the deformed body. The process and procedures undertaken to go from high-speed videography to motion estimation are dis-cussed, and snapshots of representative results are presented. Finally, the captured free-flight motion is also characterized and quantified.     

Numerical investigation on aerodynamic performance of a bionic flapping wing

This paper numerically studies the aerodynamic performance of a bird-like bionic flapping wing. The geometry and kinematics are designed based on a seagull wing,in which flapping, folding, swaying, and twisting are considered. An in-house unsteady flow solver based on hybrid moving grids is adopted for unsteady flow simulations. We focus on two main issues in this study, i.e., the influence of the proportion of down-stroke and the effect of span-wise twisting. Numerical results show that the proportion of downstroke is closely related to the efficiency of the flapping process. The preferable proportion is about 0.7 by using the present geometry and kinematic model, which is very close to the observed data. Another finding is that the drag and the power consumption can be greatly reduced by the proper span-wise twisting. Two cases with different reduced frequencies are simulated and compared with each other. The numerical results show that the power consumption reduces by more than 20%, and the drag coefficient reduces by more than 60% through a proper twisting motion for both cases. The flow mechanism is mainly due to controlling of unsteady flow separation by adjusting the local effective angle of attack. These conclusions will be helpful for the high-performance micro air vehicle(MAV) design.     

Stability and power optimality in time-periodic flapping wing structures

This paper investigates the nonlinear dynamics of a vehicle with two flexible flapping wings. The body dynamics and the wings’ deformation are monolithically grouped into a single system of equations, with aerodynamics accounted for by a quasi-steady blade element method. A periodic shooting method is then used to locate closed orbits of this non-autonomous system, and Floquet multipliers assess the linearized stability about the nonlinear orbit. This framework is then exposed to a gradient based optimizer, in order to quantify the role of wing planform variables, wing structure variables, and kinematic actuation variables in obtaining vehicles with superior open-loop stability characteristics, and/or low-power requirements.     

Effects of unsteady deformation of flapping wing on its aerodynamic forces

Effects of unsteady deformation of a flapping model insect wing on its aerodynamic force production are studied by solving the Navier-Stokes equations on a dynamically deforming grid.Aerodynamic forces on the flapping wing are not much affected by considerable twist,but affected by camber deformation.The effect of combined camber and twist deformation is similar to that of camber deformation.With a deformation of 6% camber and 20°twist(typical values observed for wings of many insects),lift is increased bv 10%～20%and lift-to-drag ratio by around 10%compared with the case of a rigid flat-plate wing.As a result.the deformation can increase the maximum lift coefficient of an insect.and reduce its power requirement for flight.For example,for a hovering bumblebee with dynamically deforming wings(6?mber and 20°twist),aerodynamic power required is reduced by about 16%compared with the case of rigid wings.     

Effects of aspect ratio on flapping wing aerodynamics in animal flight

Morphology as well as kinematics is a critical determinant of performance in flapping flight.To understand the effects of the structural traits on aerodynamics of bioflyers,three rectangular wings with aspect ratios（AR）of1,2,and 4 performing hovering-like sinusoidal kinematics at wingtip based Reynolds number of 5 300 are experimentally investigated.Flow structures on sectional cuts along the wing span are compared.Stronger K-H instability is found on the leading edge vortex of wings with higher aspect ratios.Vortex bursting only appears on the outer spanwise locations of high-aspect-ratio wings.The vortex bursting on high-aspect-ratio wings is perhaps one of the reasons why bio-flyers normally have low-aspect-ratio wings.Quantitative analysis exhibits larger dimensionless circulation of the leading edge vortex（LEV）over higher aspect ratio wings except when vortex bursting happens.The average dimensionless circulation of AR1 and AR2 along the span almost equals the dimensionless circulation at the 50%span.The flow structure and the circulation analysis show that the sinusoidal kinematics suppresses breakdown of the LEV compared with simplified flapping kinematics used in similar studies.The Reynolds number effect results on AR4 show that in the current Re range,the overall flow structure is not sensitive to Reynolds number.