Synthesis of Novel Spiro Pyrrolidine and Pyrrolizine Derivatives by 1,3-Dipolar Cycloaddition

The 1,3‐dipolar cycloaddition of azomethine ylides derived from isatin and amino acids viz. sarcosine and proline to 2‐arylmethylidene‐5,6‐dihydroimidazo[2,1‐b]thiazol‐3(2H)‐ones afforded novel spiro pyrrolidines and pyrrolizidines regio‐ and stereoselectively in moderate yields. The products were characterized thoroughly by IR, MS, NMR together with elementary analysis.     

Synthesis of Highly Substituted Pyrrolidines Through 1,3-Dipolar Cycloaddition Reaction of N-Metalated Azomethine Ylides with Triarylideneacetylacetone as Dipolarophile Using Titanocene Dichloride

The 1,3-dipolar cycloaddition reaction of tryarylideneacetyacetone derivatives with N-metalated azomethine ylides in the presence of titanocene dichloride and triethylamine has been investigated. This two-step synthetic sequence is very efficient and yielded the highly substituted pyrrolidines in good yields. The structure and stereochemistry of one of the products has been established by single-crystal x-ray structure and spectroscopic techniques.     

Synthesis of Novel Dispiro 1,4-Benzothiazine Hybrid Heterocycles Through 1,3-Dipolar Cycloaddition

The 1,3-dipolar cycloaddition of azomethine ylides generated in situ from the reaction of acenaphthylene-1,2-dione or isatins and α-amino acids to (E)-methyl/ethyl 2-(3-oxo-3,4-dihydro-2H-benzo[b][1,4]thiazin-2-ylidene)acetate led to the stereoselective formation of novel dispiro 1,4-benzothiazine hybrid heterocycles in good yields.     

Regioselective Synthesis of Novel Spirooxindolo and Spiroindano Nitro Pyrrolidines Through 3+2 Cycloaddition Reaction

β‐Nitro styrene reacts with nonstabilized azomethine ylides generated from isatin/ninhydrin with sarcosine, resulting in the formation of a series of spiroxindolo nitro pyrrolidines, and spiroindano nitro pyrrolidines, respectively, in good yields. It was noted that in a one‐pot 3+2 cycloaddition reaction, the azomethine ylides generated from isatin and ninhydrin have reacted with the β‐nitro styrenes regiochemically in opposite ways.     

Expedient Approach for the Synthesis of Trispiropyrrolidine Bisoxindoles Through 1,3-Dipolar Cycloaddition Reactions

A series of trispiropyrrolidine bisoxindoles has been achieved via a three-component 1,3-dipolar cycloaddition reaction of 3-aryl-5-arylmethylenespiro[indole-3′,2-[1,3]thiazolane]-2′(1H),4-dione, isatin, and sarcosine in refluxing toluene, which produced the corresponding cycloadducts in good yields (79–88%). Their structures were determined by infrared, ¹H and ¹³C NMR, elementary analysis, and single-crystal x-ray diffraction analysis, and the cycloaddtion reaction was found to be highly regio- and stereoselective.     

Synthesis of Naphtho[2,1-b]pyrano Pyrrolothiazole Derivatives through 1,3-Cycloaddition Reaction

Facile synthesis of a series of naphtho[2,1,b]pyrano pyrrolo thiazoles was accomplished in good yields in a one-pot reaction through intramolecular 1,3-dipolar cycloaddition of cyclic azomethine ylides with Baylis–Hillman adducts as dipolarophiles. The protocol is applicable to a wide variety of photochromic and biologically active napthopyrano products. The regio- and stereochemical outcome of the cycloaddition reaction was ascertained by x-ray crystallographic study of one of the cycloadducts.     

甲亚胺叶立德的1,3-偶极环加成反应合成螺吲哚里西啶类化合物

通过7-芳亚甲基-6,7-二氢中氮茚-8(5H)-酮与甲亚胺叶立德(经苊醌或靛红与肌氨酸反应原位生成)进行的l,3-偶极环加成反应,合成了具有良好产率的新的1’-甲基-4’-芳基-5",6"-二氢-2H,8"H-二螺[苊烯-1,2’-吡咯烷-3’,7"-中氮茚]-2,8"-二酮类化合物和1’-甲基-4’-芳基-5",6"-二氢-1H,8"H-二螺[吲哚-3,2’-吡咯烷-3’,7"-中氮茚]-2,8"-二酮类化合物.采用NMR,IR,质谱,元素分析以及X射线单晶衍射等多种谱学技术对产物进行了结构表征.     

Synthesis of Novel Spiro Thiazolo[3,2-a][1,3,5]triazines via 1,3-Dipolar Cycloaddition of Azomethine Ylide

The 1,3‐dipolar cycloaddition of an azomethine ylide generated by a decarboxylative route from sarcosine and acenaphthenequinone to 7‐arylmethylidene‐3‐aryl‐3,4‐dihydro‐2H‐thiazolo[3,2‐a][1,3,5]triazin‐6(7H)‐ones afforded novel dispiro[acenaphthylene‐1,2′‐pyrrolidine]‐3′,7′ ′‐[1,3]thiazolo[3,2‐a][1,3,5]triazines in moderate yields. The structures of the products were determined and characterized thoroughly by NMR, MS, IR, elemental analysis and X‐ray crystallographic analysis. The results of experiment indicated that this 1,3‐dipolar cycloaddition proceeded with high stereoselectivity and regioselectivity.     

Facile One-Pot Synthesis of Ferrocene-Based Spiropyrrolidines and Pyrrolizidines Through 1,3-Dipolar Cycloaddition Reaction

A facile and efficient synthesis of ferrocene-based spiroacenaphthenone pyrrolidines and pyrrolizidines through a one-pot, three component 1,3-dipolar cycloaddition reaction is described.     

Chemo- and Regioselective 1,3-Dipolar Cycloaddition of 2-Diazopropane over 1,4-Benzoquinone: Synthesis of New Pyrazoloquinones

Abstract

1,3-Dipolar cycloaddition reaction of 2-diazopropane 1 with 1,4-benzoquinone 2 carried out at ?20 °C led to a minor mono-cycloadduct 4 and mixture of bis-cycloadducts 6 and 7. The same addition realized with 3H-pyrazole 7 at ?60 °C for 2 h yields a mixture of compounds 8 and 9 and results in O-alkylation. The reaction of 3H-pyrazoles 4 and 7 with dimethylsulfoxide and oxalyl chloride under Swern conditions led to pyrazolenines 11 and 12.     

Synthesis of Novel Trispiroheterocycles through 1,3-Dipolar Cycloaddition of Azomethine Ylides and Nitrile Oxide

The 1,3‐dipolar cycloaddition of an azomethine ylide generated by a decarboxylative route from sarcosine and isatin to 1‐benzyl‐3,5‐diarylmethylidene‐piperidin‐4‐ones afforded novel di‐spiro‐indolo/pyrrolidino/piperidines in moderate yields. Further cycloaddition of these di‐spiro compounds to nitrile oxide afforded tri‐spiro‐indolo/pyrrolidino/piperadino/isoxazolines in moderate yields with high regio‐ and stereoselectivity.     

1,3-偶极环加成法合成异噁唑啉新化合物及其生物活性的研究

以N-甲羟胺硫酸盐和芳香族羰基化合物为主要原料合成了一系列不同的1,3-偶极化合物, 并合成了四种不同的单取代苯乙烯. 以该系列1,3-偶极化合物和单取代苯乙烯为主要中间体, 采用1,3-偶极环加成反应合成了一系列异噁唑啉类新化合物. 同时研究了1,3-偶极化合物与单取代烯发生的1,3-偶极环加成反应, 该合成过程为理想的绿色反应, 合成产物是5位取代异噁唑啉. 通过质谱和核磁共振等表征了化合物的化学结构. 同时对系列异噁唑啉类新化合物进行了实验室内植物生物活性的测试, 发现了对植物灰霉病有效的新化合物.     

Construction of Pyrrolidinyl Spirooxindoles via a 1,3-Dipolar Cycloaddition Reaction of (E)-N-Boc-3-Alkylidene-Indolin-2(3H)ones with Azomethine Ylides

A mild and efficient method for the construction of pyrrolidinyl spirooxindoles via a 1,3-dipolar cycloaddition reaction of (E)-N-Boc-3-alkylidene-indolin-2(3H)ones with azomethine ylides has been established. The presence of an N-Boc group in the indolin-2(3H)ones obviously increased the activity and stereoselectivity of the reaction, affording the desired pyrrolidinyl spirooxindoles 4 with up to 85% yield and up to >99/1 dr value. Furthermore, the antibacterial activity of these compounds against Staphylococcus aureus (ATCC-25825) has been tested at minimum concentration, and some of them exhibit moderate antibacterial activity.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Design,Synthesis and Properties of Novel C60-Crown Dyads by 1,3-Dipolar Cycloaddition

Based on the 1,3-dipolar cycloaddition of azomethine ylide generated in situ from aldehyde and sarcosine attached to C60,two novel benzo-15-crown-5/C60 dyads with a different linking chain in each were designed and synthesized in yields of 30％ and 38％,respectively.It was found that their UV-Vis absorption spectra could be regulated hypsochromically by metal ions complexed.The long and soft linking chain was favorable for cooperate interaction of crown ether unit and C60 unit.     

Soluble Polymer-Supported Synthesis of Pyrazoles via 1,3-Dipolar Cycloaddition Strategy

Rapid parallel liquid-phase synthesis of pyrazoles has first been developed. The 1,3-dipolar cycloaddition between nitrilimines generated in situ and soluble polymer-supported alkynyl or alkenyl dipolarophiles in parallel one-pot fashion gave the corresponding PEG-supported regioisomeric pyrazoles or regiospecific pyrazolines. The latter was assuredly oxidated by DDQ to PEG-supported regiospecific pyrazoles. Cleavage from the support under mild conditions afforded pyrazoles in good yields and high ouritv.     

Elegant Synthesis of Highly Functionalized 1,2,3-Trisubstituted Cyclopentanes

The conversion of cyclic Baylis–Hillman acetates 1 into the corresponding cyano derivatives 2 was achieved using potassium cyanide in the presence of 1,4-diazabicyclo[2.2.2]octane (DABCO) in aqueous medium. The obtained Michael acceptors 2 easily add primary amines in absolute ethanol to produce a new family of 1,2,3-trisubstituted cyclpentanes 3 in good yields.     

1,3-偶极环加成反应在有机合成方面的新进展

1,3-偶极环加成是新近被用于杂环和天然产物合成的重要反应。本文主要综述1,3-偶极环加成反应在有机合成方面的研究现状和发展趋势,着重介绍基于硝酮,腈氧化物等偶极体系的合成策略和实例。     

Synthesis of 3-Borylated Pyrrolidines by 1,3-Dipolar Cycloaddition of Alkenyl Boronates and Azomethine Ylide

A scalable and efficient process for the preparation of 3-borylated pyrrolidines by 1,3-dipolar cycloaddition of N-benzyl azomethine ylide generated in situ has been developed. The optimized method included the use of LiF in DMSO at 110 °C and was suitable for α-mono-, α,β-di-, and α,β,β-trialkyl-, β,β-(hetera)cycloalkylidene-, CO₂Et-, as well as most β-(het)aryl-substituted alkenyl boropinacolates. The 1,3-dipolar reaction proceeded on a multigram scale providing 3-borylated pyrrolidines with diverse substitution patterns (including fused and spirocyclic ones) in a diastereoselective manner. The Pd(OH)₂-mediated N-debenzylation of pyrrolidine hydrochlorides was successfully performed to give the corresponding bifunctional building blocks on an up to 130 g scale, thus providing a substantial expansion of the synthetic and medicinal chemist's toolbox. Other reactions included the preparation of trifluoroborates, Zweifel-Aggarwal sp³-sp² coupling, and oxidative deborylation as an example of C-heteroatom bond formation.     

Three-Component Synthesis and 1,3-Dipolar Cycloaddition of Highly Functionalized Pyrans with Nitrile Oxides: Easy Access to 1,2,4-Oxadiazoles

Three-component reaction of 1-[(4-chlorophenyl)sulfanyl]acetone, malononitrile, and substituted aromatic aldehydes in the presence of sodium ethoxide under simple mixing at ambient temperature for 5–8 min afforded highly functionalized 4H-pyrans in good to excellent yields. 1,3-Dipolar cycloaddition of nitrile oxides over the nitrile functionality of the 4H-pyrans furnished 1,2,4-oxadiazoles in moderate yields.

Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for full experimental and spectral details.     

Regioselective Synthesis of Substituted Triazolium Salts via 1,3-Dipolar Cycloaddition Reactions

The regioselectivity of 1,3-dipolar cycloaddition reactions of 1-aza-2-azoniaallene salts with ,-unsaturated nitriles such as acrylonitrile or cyclohexylidene acetonitrile afforded only 1,2,4-triazolium salts via addition to the nitrile group, while the other expected pyrazolium salts were not observed. Moreover, 1-aza-2-azonia-allene salts reacted with other competitive systems such as -iminonitrile derivatives yielding only triazolium salts via addition to the nitrile and not to the imino group. Treatment of cumulene with 3-pyridylnitrile afforded the pyridinium salt. However, 2,3-dimethyl-5-(2,6-dimethoxyphenyl)-[1,2,4]triazole could be prepared from cumulene and 2,6-dimethoxybenzonitrile. Some reactions of nitriles with 1-aza-2-azonia-allene salts prepared from 1,2,3-indantrione and 9-acetylphenanthrene are discussed.