Arsenic metabolism in seaweed-eating sheep from Northern Scotland

Cation exchange and anion exchange liquid chromatography were coupled to an ICP-MS and optimised for the separation of 13 different arsenic species in body fluids (arsenite, arsenate, dimethylarsinic acid (DMAA), monomethylarsonic acid (MMAA), trimethylarsine oxide (TMAO), tetramethylarsonium ion (TMA), arsenobetaine (AsB), arsenocholine (AsC), dimethylarsinoyl ethanol (DMAE) and four common dimethylarsinoylribosides (arsenosugars). The arsenic species were determined in seaweed extracts and in the urine and blood serum of seaweed-eating sheep from Northern Scotland. The sheep eat 2-4 kg of seaweed daily which is washed ashore on the most northern Island of Orkney. The urine, blood and wool of 20 North Ronaldsay sheep and kidney, liver and muscle from 11 sheep were sampled and analysed for their arsenic species. In addition five Dorset Finn sheep, which lived entirely on grass, were used as a control group. The sheep have a body burden of approximately 45-90 mg arsenic daily. Since the metabolism of arsenic species varies with the arsenite and arsenate being the most toxic, and organoarsenic compounds such as arsenobetaine the least toxic compounds, the determination of the arsenic species in the diet and their body fluids are important. The major arsenic species in their diet are arsenoribosides. The major metabolite excreted into urine and blood is DMAA (95 +/- 4.1%) with minor amounts of MMAA, riboside X, TMA and an unidentified species. The occurrence of MMAA is assumed to be a precursor of the exposure to inorganic arsenic, since demethylation of dimethylated or trimethylated organoarsenic compounds is not known (max. MMAA concentration 259 microg/L). The concentrations in the urine (3179 +/- 2667 microg/L) and blood (44 +/- 19 microg/kg) are at least two orders of magnitude higher than the level of arsenic in the urine of the control sheep or literature levels of blood for the unexposed sheep. The tissue samples (liver: 292 +/- 99 microg/kg, kidney: 565 +/- 193 microg/kg, muscle: 680 +/- 224 microg/kg) and wool samples (10470 +/- 5690 microg/kg) show elevated levels which are also 100 times higher than the levels for the unexposed sheep.     

Certification of total arsenic, dimethylarsinic acid and arsenobetaine contents in a tuna fish powder (BCR-CRM 627)

Tuna fishes were collected in the Straits of Messina (Italy), were dissected and dorsal muscles minced, freeze-dried, ground and sieved. The obtained powder was stabilised by γ-irradiation and filled into brown glass bottles. The homogeneity and stability at +20 °C and +40 °C were verified with regards to the total arsenic, dimethylarsinic acid and arsenobetaine contents. Ten laboratories participated in the certification study. All participants had demonstrated beforehand their ability to produce accurate results for the As speciation in fish tissue. The certified values are: total arsenic (4.8 ± 0.3) mg/kg, arsenobetaine (52 ± 3) μmol/kg, dimethylarsinic acid (2.0 ± 0.3) μmol/kg. The material is available from the BCR since early 1998. Received: 31 March 1998 / Revised: 20 July 1998 / Accepted: 25 July 1998     

A gradient anion exchange chromatographic method for the speciation of arsenic in lobster tissue extracts

A gradient anion exchange chromatographic technique was developed for the separation of arsenobetaine (AsB), arsenocholine (AsC), arsenite (As(III)), arsenate (As(V)), monomethylarsonic acid (MMAA) and dimethylarsinic acid (DMAA) in one chromatographic run. This technique used low residue ammonium carbonate buffer and the inductively coupled plasma-mass spectrometry (ICP-MS) chromatograms showed little baseline drift. Gradient elution improved peak shape and peak separation. The separation was completed in approximately 27 min with low detection limits (0.017-0.029 mug As kg(-1)). Baseline resolution of all the arsenic species evaluated was achieved when the concentration of AsC was less than approximately 12.5 mug As kg(-1). This technique was successfully applied to different extracts of a standard reference material, TORT-2, and lobster tissue. AsB was found to be the major arsenic species present. AsC, DMAA, MMAA and As(V) were also found, although MMAA was not detected in all of the TORT-2 extracts. Two unknown peaks found may be due to the presence of arsenosugars or other arsenic species. Discrepancy between extraction recoveries previously determined using flow injection-ICP-MS and the high-performance liquid chromatography-ICP-MS was observed in some cases. The differences may be due to the extraction technique and/or conditions at which the extractions were performed.     

Development of a rapid extraction procedure for speciation of arsenic in chicken meat

A rapid extraction procedure has been developed for speciation of arsenic in chicken tissue. Water, methanol–water (1:1), and methanol–chloroform (1:1) were tested as extraction media. Individual use of an ultrasonic bath, a microwave oven, or an ultrasonic probe was not sufficient for quantitative recovery of As(III), dimethylarsinate, monomethylarsonate, As(V), and arsenobetaine in spiked samples of chicken tissue. A new extraction procedure using a methanol–water mixture and a microwave oven then an ultrasonic probe enabled extraction of the arsenic species in 7 min with efficiencies ranging from 80 to 100%. HPLC–UV–HG–AFS was used for the determinations. The extraction procedure was 100% efficient when applied to real samples of chicken tissue. AsB (48±5 μg As kg ⁻¹) and one containing-arsenic feed additive, Nitarsone (227±5 μg As kg ⁻¹) were detected.     

Methods for the separation and quantification of arsenic species in SRM 2669: arsenic species in frozen human urine

Two independent liquid chromatography inductively coupled plasma-mass spectrometry (LC/ICP-MS) methods for the separation of arsenic species in urine have been developed with quantification by standard additions. Seven arsenic species have been quantified in a new NIST frozen human urine Standard Reference Material (SRM) 2669 Arsenic Species in Frozen Human Urine, Levels 1 and 2. The species measured were: arsenite (As(III)), arsenate (As(V)), monomethylarsonate (MMA), dimethylarsinate (DMA), arsenobetaine (AB), arsenocholine (AC), and trimethylarsine oxide (TMAO). The purity of each arsenic standard used for quantification was measured as well as the arsenic species impurities determined in each standard. Analytical method limits of detection (L _D) for the various species in both methods ranged from 0.2 to 0.8 μg L⁻¹ as arsenic. The results demonstrate that LC/ICP-MS is a sensitive, reproducible, and accurate technique for the determination of low-level arsenic species in urine. Measurements of the arsenic species 3 years after initial production of the SRM demonstrate the stability of the arsenic species in the urine reference material.     

Study on simultaneous speciation of arsenic and antimony by HPLC-ICP-MS

A method was developed for the simultaneous speciation of arsenic and antimony with HPLC-ICP-MS using C30 reversed phase column. Eight kinds of arsenic compounds (As(III), As(V), monomethylarsonic acid (MMAA), dimethylarsinic acid (DMAA), arsenobetaine (AB), arsenocholine (AsC), trimethylarsine oxide (TMAO) and tetramethylarsonium (TeMA)), Sb(III) and Sb(V) were simultaneously separated by the special mobile phase containing ammonium tartrate. Especially for the species of organic As, a C30 column was better than a C18 column in the effect of separation. Limits of detection (LOD) for these elements were 0.2 ng ml⁻¹ for the species of each As, and 0.5 ng ml⁻¹ for the species of each Sb, when a 10 μl of sample was injected, respectively. The proposed method was applied to a hot spring water and a fish sample.     

The Contrasting Behaviour of Arsenic and Germanium Species in Seawater

The vertical profiles of inorganic arsenic [As(III)+As(V)], monomethylarsonic acid (MMAA), dimethylarsinic acid (DMAA), inorganic germanium and monomethylgermanium (MMGe) were investigated at three sampling stations in the Pacific Ocean. In addition, the concentrations of these species in various surface waters have also been determined. The vertical profile of both inorganic arsenic and germanium displayed low concentrations, 1100 to 1450 ng dm³ for inorganic arsenic and <0.7 to 2 ng dm³ for inorganic germanium, in the surface zone. The concentrations of inorganic arsenic increased with depth to maximum concentrations that varied from 1500 to 2200 ng dm³ at a depth of 2000 m and then slowly decreased to concentrations that varied from 1300 to 1900 ng dm³ at a depth of 5000 m. On the other hand, the vertical profiles of inorganic germanium displayed a relatively constant concentration (4 to 8 ng dm³) from a depth of 2000 m to 5000 m. These vertical profiles of inorganic germanium were linearly correlated with those of silicate with a Ge/Si molar ratio of 0.715×10⁶. Both MMAA and DMAA displayed maximum concentrations in surface water and abruptly dropped with depth from 0 to 200 m. The concentration in surface water was 12 ng dm³ for MMAA and varied from 48 to 185 ng dm³ for DMAA. At depths >200 m, MMAA and DMAA were generally at comparable concentrations of about 3 ng dm³. In the case of MMGe, it was uniformly distributed throughout the water column at a concentration of approximately 16 ng dm³, indicating that MMGe was not involved in the biogeochemical cycling of inorganic germanium. In deep waters (>200 m), the concentrations of both inorganic arsenic and germanium increased from the southern Tasman Sea to the north. The increase in inorganic arsenic concentration was linearly correlated with that of phosphate and the increase in inorganic germanium concentration was linearly correlated with that of silicate, with apparent δAs/δP and δGe/δSi molar ratios of 4.53×10³ and 0.73×10⁶, respectively. © 1997 by John Wiley & Sons, Ltd.     

Decomposition of organoarsenic compounds for total arsenic determination in marine organisms by the hydride generation technique

The conditions necessary for the complete decomposition of six organic arsenic compounds, namely methylarsonic acid (MMAA), dimethylarsinic acid (DMAA), trimethylarsine oxide, tetramethylarsonium iodide, arsenocholine bromide (AsC) and arsenobetaine (AB), were investigated. The degree of decomposition of the arsenic compounds was monitored using a hydride generation (HYD) technique, because the response from this system depends strongly on the chemical species of arsenic, with inorganic arsenic (the expected product from these decomposition experiments) giving a much more intense HYD signal than the organic arsenic compounds. The arsenic compounds were decomposed by heating them with three types of acid mixture, namely HNO₃? HClO₄, HNO₃? HClO₄? HF, or HNO₃? HClO₄? H₂SO₄. Both MMAA and DMAA were decomposed completely using any of the mixed acids at a decomposition temperature of 200 °C or higher. The HNO₃? HClO₄? H₂SO₄ mixture was the most effective for decomposing AsC and AB, which are the most difficult compounds among all types of organic arsenic compound to decompose and render inorganic. The complete decomposition of AB was only achieved, however, when the temperature was 320 °C or higher, and the sample was evaporated to dryness. When the residue from this treatment was examined by high‐performance liquid chromatography combined with inductively coupled plasma atomic emission spectrometry, all of the arsenic was found to be present as arsenic(V). The optimized conditions (HNO₃? HClO₄? H₂SO₄ at 320 °C) for decomposing AB were then used to determine the total amount of arsenic in marine organisms known to contain AB. Copyright © 2005 John Wiley & Sons, Ltd.     

Chromatographic determination of phenylarsenic compounds

Urinary arsenic speciation is considered to be an effective procedure to differentiate between toxic inorganic and less toxic organic arsenic exposure. The aim of the present work was to develop a new method for the simultaneous determination of the main arsenic species so far detected in urine: arsenite (As(III)), arsenate (As(V)), methylarsonic acid (MA), dimethylarsinic acid (DMA), and arsenobetaine (AsB). The method is based on anion exchange HPLC coupled on-line to an inductively coupled plasma mass spectrometer (ICP-MS) for element specific detection. Experimental parameters, such as column type and composition of the mobile phases were optimized in order to get best separation, little matrix interferences, lowest detection limits, and short total times of analyses. Best chromatographic conditions were obtained by using a Dionex AS14 anion exchange column and a gradient elution with tetramethylammonium hydroxide and ammonium carbonate as eluting compounds. The detection limits (3 σ) were found to be in the sub μg L^–1 range. The method was applied to analyze different urine samples from persons with and without consumption of seafood. To avoid significant matrix influences, samples (24 h urine) had to be diluted 1 : 5 with water and were filtered through a 0.45 μm filter prior to analyses. Special attention was focused on the validation of the method according to the regulations of the “Deutsche Forschungsgemeinschaft” (DFG) for the analyses of hazardous substances in biological materials. Received: 22 December 1997 / Revised: 18 February 1998 / Accepted: 22 February 1998     

Speciation of arsenic compounds by HPLC with hydride generation atomic absorption spectrometry and inductively coupled plasma mass spectrometry detection

An arsenic specific detection system utilizing on-line microwave digestion and hydride generation atomic absorption spectrometry (MD/HGAAS) is described for arsenic speciation by using high performance liquid chromatography (HPLC). Both ion exchange chromatography and ion pair chromatography have been studied for the separation of arsenite, arsenate, monomethylarsonic acid (MMAA), dimethylarsinic acid (DMAA), and arsenobetaine (AB). When the commonly used mobile phases, phosphate and carbonate buffers at pH 7.5, are used on an anion exchange column, arsenite and AB co-elute. However, selective determination of these two arsenic compounds can be achieved by using the new detection system. Partial separation between arsenite and AB can be achieved by increasing the mobile phase pH to 10.3 and by using a polymer based anion exchange column. The detection limit obtained by using anion exchange chromatography with MD/HGAAS detection is approximately 10 ng/ml (or 200 pg for a 20-mul sample injection) for arsenite, DMAA and AB, 15 ng/ml (or 300 pg) for MMAA, and 20 ng/ml (or 400 pg) for arsenate. Complete separation of the five arsenic compounds is achieved on a reversed phase C18 column by using sodium heptanesulfonate as ion pair reagent. Comparable resolution between chromatographic peaks is obtained by using MD/HGAAS detection and inductively coupled plasma mass spectrometry (ICPMS) detection.     

Blue light induces arsenate uptake in the protist Thraustochytrium

The effects of light on arsenic accumulation of Thraustochytrium CHN‐1 were investigated. Thraustochytrium CHN‐1, when exposed to blue light from light‐emitting diodes (LEDs), accumulated arsenate added to its growth medium to a much greater extent than Thraustochytrium cells exposed to fluorescent or red light, or when cultured in the dark. Arsenic compounds in Thraustochytrium CHN‐1 were analyzed by high‐performance liquid chromatography, with an inductively coupled plasma mass spectrometer serving as an arsenic‐specific detector. Arsenate, arsenite, monomethylarsonic acid (MMAA), dimethylarsinic acid (DMAA) and arsenosugar were identified. The order of arsenic species in Thraustochytrium CHN‐1 was arsenic(V)> arsenic(III)> MMAA > DMAA at an arsenic concentration of 10 mg dm^?3 in the medium in blue LED light. As it is known that blue light induces the synthesis of certain metabolites in plants and microorganisms, this indicates that the accumulation of arsenic is an active metabolic process. Copyright © 2005 John Wiley & Sons, Ltd.     

The biotransformation of monomethylarsonate and dimethylarsinate into arsenobetaine in seawater and mussels

Water-soluble ³H-labeled arsenic compounds were phenol-extracted from mussels (Mytilus edulis) and seawater after exposure to [³H]monomethylarsonate (MMAA) and [³H]dimethylarsinate (DMAA). Varying amounts of [³H] arsenobetaine were found in mussels and seawater, depending upon the experimental conditions. The results indicate that arsenobetaine is principally biosynthesized by microscopic organisms in the seawater and that it is bioaccumulated by mussels. Total arsenic concentrations in mussel flesh, byssal threads and shells were also determined, showing concentration increases in all three compartments.     

Development of an automated technique for the speciation of arsenic using flow injection hydride generation atomic absorption spectrometry (FI-HG-AAS)

An automated method for the determination of arsenic acid (AsV), arsenous acid (AsIII), monomethylarsonic acid (MMAA) and dimethylarsinic acid (DMAA) was developed using a commercial available flow injection hydride generation system. By carrying out the hydride generation in selected acid media the determination of As(III) alone, of MMAA and DMAA by sum and by different sensitivities, and of all four species is possible.     

Separation of organic and inorganic arsenic species by HPLC-ICP-MS

The HPLC separation of eight anionic, cationic or neutral arsenic species (arsenite, arsenate, monomethylarsonic acid, dimethylarsinic acid, arsenobetaine, arsenocholine, trimethylarsine oxide and tetramethylarsonium ion) on a high-capacity, anion-exchange column (Ion Pac AS 7, Dionex) was studied. The separation was performed during one run with a nitric acid gradient ranging from pH 4–1.3. The influence of sodium dodecyl sulfate (SDS), sodium octyl sulfate (SOS) and 1,2-benzenedisulfonic acid (BDSA) as ion pairing eluent modifiers was investigated. In addition the effect of elevated temperatures (30 to 40 °C) was studied. The best results were obtained at room temperature of 20 °C with 0.05 mM benzenedisulfonic acid as the eluent modifier. The chromatograph was connected to an ICP-MS via a cross-flow nebulizer. Detection limits obtained with the optimized chromatographic separation were 0.16–0.60 μg As L^–1 for different species. The proposed speciation method was applied to the determination of arsenic species in the DORM-2 reference material (Dogfish Muscle) and in aqueous extracts of mushrooms collected on arsenic contaminated ground. Received: 3 August 1998 / Revised: 17 September 1998 / Accepted: 21 September 1998     

The Distribution of Arsenic Compounds in the Ocean: Biological Activity in the Surface Zone and Removal Processes in the Deep Zone

The vertical profies of inorganic arsenic [As(III)+As(V)], monomethylarsonic acid (MMAA) and dimethylarsinic acid (DMAA) were investigated at four sampling stations in the Pacific Ocean and a sampling station in the southern Tasman Sea. In addition, the concentrations of those compounds in surface waters of the Pacific Ocean and Tasman Sea have been determined. The vertical profiles of inorganic arsenic showed the low concentrations in both the surface and deep/bottom zones. The depleted concentrations in the surface zone varied from 1000 to 1700 ng dm⁻³ and that in the deep/bottom zone varied from 1300 to 2050 ng dm⁻³. The maximum concentrations that varied from 1500 to 2450 ng dm⁻³ were usually observed at a depth of about 2000 m. Both MMAA and DMAA were observed throughout the water column at sampling stations in the north-western and equatorial regions of the Pacific Ocean. At the sampling station in the central northern Pacific gyre, DMAA was the only methylated arsenic compound observed throughout the water column. On the contrary, at the sampling station in the southern Tasman Sea, the only detected methylated arsenic compound throughout the water column was MMAA. Their vertical profiles showed maximum concentrations in the surface water which abruptly dropped with depth from 0 to 200 m. The concentration in the surface water was close to 10 ng dm⁻³ for MMAA and varied from 27 to 185 ng dm⁻³ for DMAA. At depths greater than 100 m, MMAA and DMAA were at comparable concentrations which varied from 0.7 to 14 ng dm⁻³. The low inorganic arsenic concentration in the surface zone was due to biological activity. This activity resulted in the uptake of As(V) and subsequent reduction and methylation to MMAA and DMAA. DMAA was the main predominant arsenic compound resulting from biological activity in surface waters. The low inorganic arsenic concentrations in the deep and bottom zones were likely to be caused by the adsorption of dissolved inorganic arsenic onto sinking particulates rich in iron and manganese oxides.     

Seasonal dynamics of dimethylarsinic‐acid‐decomposing bacteria dominating in Lake Kahokugata

Decomposition processes of organoarsenic compounds significantly influence arsenic cycles in aquatic environments, and such processes depend on bacterial activity. However, the bacterial characteristics in these environments are obscure. Accordingly, we observed seasonal variations of arsenic species and the bacterial population decomposing dimethylarsinic acid (DMAA) in Lake Kahokugata from April 2002 to January 2003. Monitoring of bacterial biomass involving DMAA decomposition using the most probable number procedure showed that the bacterial cell densities ranged from 36 to 3600 ml^?1. On the other hand, methylated arsenic was not detected during the experimental period, although the inorganic arsenic concentration was over 4 nM . This suggests that bacteria remineralized methylated arsenic species to inorganic arsenic. Furthermore, the composition of bacterial communities involving DMAA decomposition was examined by restriction‐fragment‐length polymorphism analysis of the 16S rDNA nucleotide. As a result, a total of 49 isolates were classified into 10 type groups, and 32 of these isolates belonged to three dominant type groups. Phylogenetic analysis using 16S rDNA partial sequences (ca 320 bp) suggests that the representative isolates of the dominant type groups are specific to the summer or winter season. Moreover, as a result of the culture experiments to examine DMAA decomposition activity, the representative isolates decomposed 1 µM DMAA at a decomposition percentage of below 80%. In conclusion, some bacterial communities in a specific season can decompose DMAA to varying degrees, contributing to the annual cycle of arsenic species. Copyright © 2005 John Wiley & Sons, Ltd.     

Human metabolism of arsenolipids present in cod liver

We report results from the first investigation of the human metabolism of arsenic-containing lipids (arsenolipids), significant arsenic constituents of some seafood products. Two male volunteers ingested canned cod liver and the arsenic metabolites in their urine were monitored by high-performance liquid chromatography inductively coupled plasma mass spectrometry over a 66-h period. Volunteer A consumed 85 g (wet mass) of cod liver containing a total of approximately 120 μg arsenic, 77% of which was present as arsenolipids, and volunteer B consumed 85 g (wet mass) of cod liver, 25% of which was present as arsenolipids, together with 20 g of cod liver oil, containing a total of about 180 μg arsenic. The structures of the arsenolipids are currently unknown, whereas the majority of the non-lipid arsenic in the cod liver was identified as arsenobetaine, which was excreted unchanged. The arsenolipids were rapidly metabolised to water-soluble compounds and excreted in the urine; peak arsenic concentrations were recorded between 7 and 15 h (volunteer A) and between 6.5 and 15 h (volunteer B), and by the end of the experiment about 90% of the ingested arsenic had been accounted for in the urine for both volunteers. The major arsenolipid metabolite was dimethylarsinate (DMA), constituting 73% (volunteer A) or 41% (volunteer B) of the total urinary arsenic, and most of the remaining arsenolipid-derived arsenic, constituting about 10% (volunteer A) and 5% (volunteer B), comprised four novel arsenic-containing fatty acids, namely oxo-dimethylarsenopropanoic acid, thio-dimethylarsenopropanoic acid, oxo-dimethylarsenobutanoic acid, and thio-dimethylarsenobutanoic acid. Unchanged arsenobetaine (15% for volunteer A and 51% for volunteer B) made up the remaining urinary arsenic together with trace quantities of other, mostly unknown, arsenicals. In a second experiment (volunteer A only), performed with pure cod liver oil, which contains only arsenolipids, DMA and the same four arsenic fatty acids were excreted in the urine. The study shows that arsenolipids in cod liver are bioavailable, and that they are quickly biotransformed to several water-soluble arsenicals, the structures of which suggest that the native arsenolipids contain a dimethylarsine oxide moiety.     

Determination of arsenic species in a freshwater crustacean Procambarus clarkii

The arsenic species present in samples of the crayfish Procambarus clarkii caught in the area affected by the toxic mine‐tailing spill at Aznalcóllar (Seville, Southern Spain) were analyzed. The total arsenic contents ranged between 1.2 and 8.5 µg g^?1 dry mass (DM). With regard to the different species of arsenic, the highest concentrations were for inorganic arsenic (0.34–5.4 µg g^?1 DM), whereas arsenobetaine, unlike the situation found in marine fish products, was not the major arsenic species (0.16 ± 0.09 µg g^?1 DM). Smaller concentrations were found of arsenosugars 1a (0.18 ± 0.11 µg g^?1 DM), 1b (0.077 ± 0.049 µg g^?1 DM), 1c (0.080 ± 0.089 µg g^?1 DM), and 1d (0.14 ± 0.13 µg g^?1 DM). The presence of two unknown arsenic species was revealed (U1: 0.058 ± 0.058 µg g^?1 DM; U2: 0.12 ± 0.12 µg g^?1 DM). No significant differences were seen with respect to the total arsenic contents between the sexes. However, significant differences in the total arsenic contents were revealed between the area affected by the spill and the area not affected, the contents being greater in the affected area. Copyright © 2002 John Wiley & Sons, Ltd.     

Determination of urinary arsenic and impact of dietary arsenic intake

An analytical method based on microwave decomposition and flow injection analysis (FIA) coupled to hydride generation atomic absorption spectrometry (HGAAS) is described. This is used to differentiate arsenite [As(III)], arsenate [As(V)], monomethylarsonic acid (MMA) and dimethylarsinic acid (DMA) from organoarsenic compounds usually present in seafood. Without microwave digestion, direct analysis of urine by HGAAS gives the total concentration of As(III), As(V), MMA and DMA because organoarsenic compounds such as arsenobetaine, usually found in most seafood, are not reducible upon treatment with borohydride and therefore cannot be determined by using the hydride generation technique. The microwave oven digestion procedure with potassium persulfate and sodium hydroxide as decomposition reagents completely decomposes all arsenicals to arsenate and this can be measured by HGASS. Microwave decomposition parameters were studied to achieve efficient decomposition and quantitative recovery of arsenobetaine spiked into urine samples. The method is applied to the determination of urinary arsenic and is useful for the assessment of occupational exposure to arsenic without intereference from excess organoarsenicals due to the consumption of seafood. Analysis of urine samples collected from an individual who ingested some seafood revealed that organoarsenicals were rapidly excreted in urine. After the ingestion of a 500-g crab, a 10-fold increase of total urinary arsenic was observed, due to the excretion of organoarsenicals. The maximum arsenic concentration was found in the urine samples collected approximately between 4 to 17 hr after eating seafood. However, the ingestion of organoarsenic-containing seafoods such as crab, shrimp and salmon showed no effect on the urinary excretion of inorganic arsenic, MMA and DMA.     

Determination of arsenic species in human urine using HPLC with on-line photooxidation or microwave-assisted oxidation combined with flow-injection HG-AAS

An improved analytical procedure is presented for the separation and simultaneous determination of hydride-forming (toxic) and not hydride-forming (non-toxic) arsenic species in human urine. Separation was performed by cation-exchange chromatography using a new solid phase type based on the continuous bed chromatography (CBC) technology. This column permits by a factor of 4 higher flow rates than conventional columns resulting in a drastical reduction of retention times without any loss of resolution. Using this type of column, arsenobetaine (AsBet), arsenocholine (AsChol), and dimethylarsinic acid (DMA) were separated from the more toxic arsenic species arsenous acid (As(III)), arsenic acid (As(V)), and methylarsonic acid (MA) within only 4 min. The HPLC system was coupled via a flow injection system and either a UV or a microwave (MW) reactor to the HG-AAS instrument. UV photolysis and MW digestion were used to transform AsBet and AsChol to hydride-forming species and to make them accessible to HG-AAS. UV photolysis turned out to be more suitable for this application than MW digestion, because the latter technique led to peak broadening and poorer performance. The described procedure was applied to the determination of arsenic species in urine samples of non-occupationally exposed persons before and 12 h after seafood consumption. Detection limits were about 1 μg/L for each arsenic species. After consumption, the AsBet and DMA excretion increased by at least a factor of 150 for AsBet and by a factor of 6 for DMA, respectively, while the excretion of the other species did not increase significantly. This invalidates the use of total urinary arsenic as well as total hydride-forming arsenic as an indicator for exposure to inorganic arsenic. Received: 12 August 1998 / Revised: 30 October 1998 / Accepted: 24 November 1998