The molecular structures of gaseous cyclopentene oxide,cyclohexene oxide and cycloheptene oxide as determined by electron diffraction

The molecular structures of gaseous cyclopentene oxide, cyclohexene oxide and cycloheptene oxide are investigated by electron diffraction. The boat conformation of cyclopentene oxide is confirmed, while a half-chair conformer is determined for cyclohexene oxide. Cycloheptene oxide is found to exist in a 66(2):34(2) conformational mixture of two chair forms.     

不同结构氧化锌对CIIR/ENR共混胶的气体阻隔性能和力学性能的影响

以重量比为90∶10的氯化丁基橡胶/环氧天然橡胶共混胶为基体,用密炼法将三种不同结构的氧化锌（普通条状氧化锌、片状氧化锌和纳米结构氧化锌）分散到基体中,研究不同结构的氧化锌对共混胶力学性能和气体阻隔性能的影响.结果表明片状氧化锌和纳米氧化锌复合胶比普通氧化锌复合胶强度下降,伸长率提高.片层氧化锌复合体系硫磺用量提高到2.0份,综合力学性能达到最好,且片状氧化锌能够赋予复合胶最佳的气体阻隔性能,比普通氧化锌体系提高了50％.     

氧化石墨烯在辣根过氧化物酶传感器中的应用研究

本文研究氧化石墨烯的合成方法及其在生物传感器中的应用.通过Hummer法氧化天然石墨粉制得氧化石墨,在蒸馏水中利用超声分散将氧化石墨剥片,从而合成了氧化石墨烯(GO).通过透射电镜图表征了氧化石墨烯的形貌并通过红外光谱证实氧化石墨烯的形成.将所合成的氧化石墨烯与三角形貌的金纳米颗粒(prism AuNPs)、辣根过氧化...     

Interaction of Zinc Oxide and Copper Oxide Nanoparticles with Chlorophyll: A Fluorescence Quenching Study

The present study aims to investigate the interactions of zinc oxide nanoparticles and copper oxide nanoparticles with the major photosynthetic pigment chlorophyll using ultraviolet-visible, steady state, and time resolved laser induced fluorescence spectroscopy. The steady state fluorescence measurements show that zinc oxide and copper oxide nanoparticles quench the fluorescence of chlorophyll in concentration-dependent manner. The Stern-Volmer plot for the chlorophyll-zinc oxide nanoparticles is linear, and the value of quenching constant has been observed to increase with temperature indicating the possibility of dynamic quenching. A decrease in the lifetime of chlorophyll with increase in the concentration of zinc oxide nanoparticles confirms the involvement of dynamic quenching in the chlorophyll–zinc oxide nanoparticle interaction. In the case of copper oxide nanoparticles, the Stern-Volmer plot deviates from linearity observed in the form of upward curvature depicting the presence of both static and dynamic quenching. In addition, the lifetime of chlorophyll decreases with increase in the concentration of copper oxide nanoparticles displaying the dominance of dynamic quenching in the chlorophyll-copper oxide nanoparticle interaction. The decrease observed in the value of binding constant with increasing temperature and negative values of change in enthalpy, entropy, and Gibb’s free energy indicates that van der Waal and hydrogen bonding are the prominent forces during the interaction of chlorophyll with both zinc oxide and copper oxide nanoparticles and that the process is spontaneous and exothermic. The interaction of zinc oxide and copper oxide nanoparticles with chlorophyll occurs through electron transfer mechanism. The obtained results are useful in understanding the sensitization processes involving chlorophyll and zinc oxide and copper oxide nanoparticles.     

钙硼对CuO/Al_2O_3催化剂结构及醋酸仲丁酯氢解性能的影响

以经氧化钙和氧化硼改性的氧化铝为载体,采用浸渍法制备了负载型CuO/Al2O3催化剂,采用XRD、BET、TPR和NH3-TPD技术对催化剂CuO/Al2O3进行了表征.结果表明,氧化硼既可以作为结构性助剂提高铜在催化剂表面的分散度,又可以作为电子性助剂有利于催化剂表面氧化铜物种的稳定;氧化钙的引入降低了催化剂表面酸性,有利于催化剂的选择性提高.采用氧化硼和氧化钙改性的Cu10B20Ca30为催化剂,醋酸仲丁酯转化率可达99.5%,生成仲丁醇和乙醇的选择性分别达98.9%和97.8%.     

Zinc oxide nanoparticles immobilized on graphene flake

Interactions of ZnO nanoparticles with graphene oxide in isopropanol were studied; graphene oxide was shown to perform as an efficient substrate to immobilize zinc oxide nanoparticles on its surface. Interactions of nanocomposites consisting of graphene oxide-zinc oxide nanoparticles with supercritical isopropanol were studied. The conversion of graphene oxide into graphene does not appreciably changes the composition, morphology, or structure of ZnO nanoparticles.     

A model for anodic hydrous oxide growth at iridium

A detailed investigation of the electrochemistry of Ir in 0.5 M H₂SO₄ has been used as an experimental basis for a model for oxide growth at Ir. It appears that a compact oxide (probably IrO₂) is formed initially. At potentials above + 1.2 V vs. RHE, the outer monolayer of this compact oxide is oxidised and becomes hydrated. The hydrated surface layer inhibits further oxidation of the compact oxide and therefore only one monolayer of hydrous oxide can be formed at constant potential. To obtain more hydrous oxide than this, the compact oxide must be continually reduced to Ir metal and reformed, by cycling of the potential. On each cycle, the hydrated surface layer of the compact oxide remains after reduction of the compact oxide. Thus, this material accumulates as a hydrous oxide layer.     

Effects of the polarizability and packing density of transparent oxide films on water vapor permeation

The tin oxide and silicon oxide films have been deposited on polycarbonate substrates as gas barrier films, using a thermal evaporation and ion beam assisted deposition process. The oxide films deposited by ion beam assisted deposition show a much lower water vapor transmission rate than those by thermal evaporation. The tin oxide films show a similar water vapor transmission rate to the silicon oxide films in thermal evaporation but a lower water vapor transmission rate in IBAD. These results are related to the fact that the permeation of water vapor with a large dipole moment is affected by the chemistry of oxides and the packing density of the oxide films. The permeation mechanism of water vapor through the oxide films is discussed in terms of the chemical interaction with water vapor and the microstructure of the oxide films. The chemical interaction of water vapor with oxide films has been investigated by the refractive index from ellipsometry and the OH group peak from X-ray photoelectron spectroscopy, and the microstructure of the composite oxide films was characterized using atomic force microscopy and a transmission electron microscope. The activation energy for water vapor permeation through the oxide films has also been measured in relation to the permeation mechanism of water vapor. The diffusivity of water vapor for the tin oxide films has been calculated from the time lag plot, and its implications are discussed.     

担载型钴镍金属氧化物催化剂上CH4还原NO反应研究

ＮＯｘ是大气的主要污染物之一,近年来,利用甲烷选择还原ＮＯｘ引起了广泛关注,研究发现,Ｃｏ、Ｍｎ和Ｎｉ离子交换的ＺＳＭ－５分子筛具有较高的活性［１～３］．但金属离子交换的分子筛催化剂有热稳定性差、易失活等缺点．最近已有金属氧化物用作甲烷还原ＮＯｘ反应...     

Positive ion fragmentation mechanisms of some simple aldehydes and epoxides and trimethylene oxide

The metastable ion spectra of ethylene oxide, acetaldehyde, acetaldehyde-d₄, propylene oxide, propionaldehyde and trimethylene oxide are presented. They reveal no reason to suppose that electron-impact-induced isomerisation of oxide to aldehyde structure occurs, although many spectral features are common to various members of this set. The spectra of phenylacetaldehyde and styrene oxide are compared, and the more plausible possibility of partial isomerisation in this case is discussed.     

Co-Ce-O超细微粒催化剂的结构与催化性能

应用ＴＥＭ、ＸＲＤ、ＸＰＳ、ＢＥＴ表面积测试和微型催化反应装置研究了Ｃｏ－Ｃｅ－Ｏ复合氧化物超细微粒催化剂结构及其４－甲基苯酚（ＰＭＰ）选择氧化制４－羟基苯甲醛（ＰＨＢ）的催化性能,结果表明Ｃｏ－Ｃｅ－Ｏ复合氧化物超细微粒催化剂的选择氧化催化活性与催化剂粒子大小、组成和结构密切相关,在Ｃｏ／（Ｃｏ＋Ｃｅ）原子比为０．３３时选择氧化催化活性达极大值,Ｃｏ－Ｃｅ－Ｏ复合氧化物超细微粒催化剂优良的选择氧化催化活性不仅仅是因为其粒子较小、比表面积较大,而且还因为高分散粒催化剂优良的选择氧化催化活性不仅仅是因为其粒子较小、比表面积较大、而且还因为高分散的Ｃｏ、Ｃｅ组份发生了相互作用,催化剂具有较主贩表面吸附态氧物浓度,经高温（〉５００℃）处理,Ｃｏ－Ｃｅ－Ｏ复合氧化物超细微粒发生烧结、比表面积减小且Ｃｏ－Ｃｅ相互作用遭到     

Catalytic Activation of a Solid Oxide in Electronic Contact With Gold Nanoparticles

Although inert in its bulk form, nanostructured gold supported on oxides has been found to be catalytically active. In many cases, the oxide promotes the activity of Au. It is now shown that in turn, nanoscale Au particles can chemically activate the solid oxide. Specifically, it was discovered that 4 nm Au nanoparticles deposited on zinc oxide catalyze the transformation of the oxide into the sulfide in the presence of an organosulfur species. Contact of the oxide with Au nanoparticles lowers the activation barrier for the solid‐state reaction by approximately 20 kJ mol^?1, allowing the reaction to be achieved closer to ambient temperatures. Electron transfer from oxygen vacancies to Au nanoparticles is proposed to generate acidic sites on the surface of the zinc oxide, resulting in the enhanced reactivity of the oxide. Knowledge of such electronic interactions between the noble metal and oxide can be exploited for engineering reactive heterostructures for low‐temperature pollutant sorption and hydrocarbon processing.     

A New Concept for Advanced Heterogeneous Metal Catalysts

Oxide-supported metal catalysts, having always nano-sized structures in which the metal catalysts are prepared as highly dispersed nano-crystals (typically 1-20 nm) on support oxide particles that are often one to several orders of magnitude larger than the metal nano-particles, are an important class of heterogeneous metal catalysts that finds many applications in chemical/petrochemical industries, in environmental protection, in chemical sensors and in the manufacture of fine and special chemicals. It is believed that catalysis by supported metals is the oldest application of nanotechnology. The literature has been rich in nano-size effect of metal nanoparticles in the metal/oxide catalysts. However, it is until recently that the development of size-controlled synthesis of oxide nanoparticles has made it possible to study the nano-size effect of oxide-support particles. When the particle sizes of an oxide support are reduced to become comparable to the sizes of the active metal nanoparticles, the oxide could deviate dramatically from its function as a conventional support. Such metal/oxide catalysts consisting of comparably sized metal and oxide nanocrystals are better called metal/oxide nanocomposite catalysts or catalytic nanoarchitectures.In this presentation, several attempts with reducing the particle size of oxide supports (ZrO2, TiO2,MgO, Al2O3) to approach the metal/oxide nanocomposite concept will be discussed to emphasize the importance of the support size effect. Examples will be given on characteristics of nanocomposite Ni/oxide catalysts for the reforming of natural gas with CO2 and/or steam, and on Au/oxide catalysts for CO oxidation and hydrogenation of unsaturated organic compounds. It will be emphasized that systematic investigations into the size effects of both the metal and oxide nanoparticles approaching the metal/oxide nanocomposite concept can lead to advanced heterogeneous metal catalysts.Moreover, intensive practice of the nanocomposite concept would also lead to discovery of special size-dependent metal-oxide interaction and catalysis, which may provide new opportunity for performance enhancement of potential and existing catalysts.     

Removal of phosphate by aluminum oxide hydroxide

The development and manufacture of an adsorbent to remove phosphate ion for the prevention of eutrophication in lakes are very important. The characteristics of phosphate adsorption onto aluminum oxide hydroxide were investigated to estimate the adsorption isotherms, the rate of adsorption, and the selectivity of adsorption. Phosphate was easily adsorbed onto aluminum oxide hydroxide, because of the hydroxyl groups. The adsorption of phosphate onto aluminum oxide hydroxide was influenced by pH in solution: the amount adsorbed was greatest at pH 4, ranging with pH from 2 to 9. The optimum pH for phosphate removal by aluminum oxide hydroxide is 4. The selectivity of phosphate adsorption onto aluminum oxide hydroxide was evaluated based on the amount of phosphate ion adsorbed onto aluminum oxide hydroxide from several anion complex solutions. It is phosphate that aluminum oxide hydroxide can selectively adsorb. The selectivity of phosphate onto aluminum oxide hydroxide was about 7000 times that of chloride. This result indicated that the hydroxyl groups on aluminum oxide hydroxide have selective adsorptivity for phosphate and could be used for the removal of phosphate from seawater.     

NO和O2在Pt(110)面上吸附的TDS和PEEM研究

采用热脱附和光电子发射普微镜研究了Ｏ２和ＮＯ在Ｐｔ（１１０）面上的吸附和共吸附。结果表明，室温条件下，ＮＯ在Ｐｔ（１１０）面上有端式和桥式两种不同的吸附方式。Ｐｔ（１１０）表面预吸附的原子态氧占据了ＮＯ进入了桥式吸附的活性粒，从而阻遏了ＮＯ在Ｐｔ表面发生解离反应必须经过的桥式吸附中间态的形式，进而降低了ＮＯ在Ｐｔ表面直接分散的能力。     

Zerovalent metal polymer composites. III. Metallization of metal oxide surfaces with the aid of metallized functional polymer microdispersions

The adsorption of poly[N-(m- and p-vinylbenzyl)-N,N,N-trimethylammonium tetrachloropal-ladate] complex on inorganic oxide surfaces followed by reduction of the palladium salt to form a catalytically active zerovalent metal polymer composite dispersed on the oxide surface and further deposition of transition metals, e.g., nickel, cobalt, and copper, by “additive” or “subtractive” deposition from electroless plating solutions is described. γ-Ferric oxide was used as a template for such intermetallic replacement reactions, providing materials with controlled amounts of metal. Multimetallic catalysts based on aluminum oxide, zinc oxide, lanthanum oxide, magnesium oxide, and silica were prepared. Iron oxide modified by subtractive deposition of rhodium and iridium on nickel-clad iron oxide were evaluated in Fischer–Tropsch carbonylation reactions leading from synthesis gas to alkanols.     

氧化石墨烯吸附亚甲基蓝的分子动力学模拟

采用分子动力学方法研究了亚甲基蓝在不同氧化度的氧化石墨烯表面的吸附行为及其动力学性质, 从微观角度讨论了亚甲基蓝由体相到氧化石墨烯表面的吸附过程及主要作用机制, 并通过亚甲基蓝分子动力学性质解释了氧化石墨烯的氧化度和含氧官能团类型对吸附行为的影响. 结果表明, 吸附过程中, 亚甲基蓝主要受氧化石墨烯表面含氧官能团的静电作用, 以近似垂直氧化石墨烯表面的方向进入, 并以平行的方式吸附于氧化石墨烯表面; 亚甲基蓝不易脱离高氧化度氧化石墨烯的吸附位点; 吸附平衡过程中, 相对于低氧化度的氧化石墨烯, 高氧化度氧化石墨烯对亚甲基蓝的束缚性更强, 同时与亚甲基蓝间相互作用更强; 含氧官能团中的环氧基与亚甲基蓝间的作用势能更强, 且羟基能够与亚甲基蓝间形成氢键结构, 共同保障了亚甲基蓝吸附层的稳定性.     

稀土氧化物对中高碳钢堆焊金属中夹杂物变质作用的热力学分析

采用热力学方法,研究了稀土氧化物对中高碳钢堆焊金属中夹杂物的变质作用。夹杂物生成的热力学分析表明,在堆焊熔池中,稀土氧化物可以被碳还原成稀土元素,稀土元素可以与氧、硫生成稀土氧化物、稀土硫化物和稀土硫氧化物,从而达到脱氧、脱硫、净化堆焊熔池的作用;稀土氧化物还可以直接与硫作用,生成稀土硫氧化物,起到脱硫的效果。     

A Review of Glucose Biosensors Based on Graphene/Metal Oxide Nanomaterials

In recent years, considerable attention has been paid to developing economical yet rapid glucose sensors using graphene and its composites. Recently, the excellent properties of graphene and metal oxide nanoparticles have been combined to provide a new approach for highly sensitive glucose sensors. This review focuses on the development of graphene functionalized with different nanostructured metal oxides (such as copper oxide, zinc oxide, nickel oxide, titanium dioxide, iron oxide, cobalt oxide, and manganese dioxide) for use as glucose biosensors. Additionally, a brief introduction of the electrochemical principles of glucose biosensors (including amperometric, potentiometric, and conductometric) is presented. Finally, the current status and future prospects are outlined for graphene/metal oxide nanomaterials in glucose sensing.     

Phospha‐michael reactions involving p‐heterocyclic nucleophiles

P‐heterocyclic γ‐ketophosphonates were synthesized by the Michael reaction of methyl vinyl ketone with dibenzo‐1,2‐oxaphosphorine 2‐oxide, 1,3,2‐dioxaphosphorine 2‐oxide and benzo‐1,3,2‐dioxaphospholane 2‐oxide, respectively. In the first two cases, 50% of 1,8‐diazabicyclo[5.4.0[undec‐7‐ene had to be used that was also required in the addition of dibenzooxaphosphorine oxide to cyclohexenone to result in the formation of the corresponding γ‐ketophosphonate. The addition of dibenzooxaphosphorine oxide to less reactive 1,2‐dihydrophosphinine oxide was accomplished after activation by an equimolar amount of trimethylaluminum to afford a 3‐P(O)<‐1,2,3,6‐tetrahydrophosphinine oxide, which was subjected to catalytic hydrogenation to provide the corresponding 1,2,3,4,5,6‐hexahydrophosphinine oxide. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:288–292, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20421