In situ sensing of metal ion adsorption to a thiolated surface using surface plasmon resonance spectroscopy

The kinetics of the adsorption of metal ions onto a thiolated surface and the selective and quantitative sensing of metal ions were explored using surface plasmon resonance (SPR) spectroscopy. The target metal ion was an aqueous solution of Pt2+ and a thin-gold-film-coated glass substrate was modified with 1,6-hexanedithiol (HDT) as a selective sensing layer. SPR spectroscopy was used to examine the kinetics of metal ion adsorption by means of the change in SPR angle. The selectivity of the thiolated surface for Pt2+ over other divalent metal ions such as Cu2+, Ni2+, and Cd2+ was evident by the time-resolved SPR measurement. SPR angle shift, deltatheta(SPR), was found to increase logarithmically with increasing concentration of Pt2+ in the range of 1.0 x 10(-5)-1.0 mM. The rate of Pt2+ adsorption on HDT observed at both 0.1 and 1 mM Pt2+ accelerates until the surface coverage reaches approximately 17%, after which the adsorption profile follows Langmuirian behavior with the surface coverage. The experimental data indicated that heavy metal ions were adsorbed to the hydrophobic thiolated surface by a cooperative mechanism. A mixed self-assembled monolayer (SAM) composed of HDT and 11-mercaptoundecanoic acid was used to reduce the hydrophobicity of the thiol-functionalized surface. The addition of hydrophilic groups to the surface enhanced the rate of adsorption of Pt2+ onto the surface. The findings show that the adsorption of metal ions is strongly dependent upon the hydrophilicity/hydrophobicity of the surface and that the technique represents an easy method for analyzing the adsorption of metal ions to a functionalized surface by combining SPR spectroscopy with a SAM modification.     

Electrochemical surface plasmon resonance investigation of dodecyl sulfate adsorption to electroactive self-assembled monolayers via ion-pairing interactions

The redox-induced assembly of amphiphilic molecules and macromolecules at electrode surfaces is a potentially attractive means of electrochemically modulating the organization of materials and nanostructures on solid substrates via ion-pairing interactions or charge-transfer complexation. In this regard, we have investigated the potential-induced adsorption and aggregation of dodecyl sulfate, a common anionic surfactant, at a ferrocenylundecanethiolate (FcC11SAu) self-assembled monolayer (SAM)/aqueous solution interface by electrochemical surface plasmon resonance (ESPR) spectroscopy. The surfactant anions adsorb onto the electroactive SAM by specific ion-pairing interactions with the oxidized ferricinium species. The ferricinium charge density (QFc+) obtained by cyclic voltammetry and surface coverage measured by SPR indicate that the dodecyl sulfate forms an interdigitated monolayer, where half of the surfactant molecules have their sulfate headgroups paired to the surface and half have their headgroups exposed to the aqueous solution. The surface coverage of dodecyl sulfate was found to depend on both the ferricinium surface concentration and the surfactant aggregation state in solution. A maximum coverage of dodecyl sulfate on the ferricinium surface is obtained below the critical micelle concentration (cmc), in contrast to dodecyl sulfate adsorption to SAM surfaces of static positive charge. This marked difference in adsorption behavior is attributed to the dynamic generation of ferricinium by potential cycling and the specific nature of the ion-pairing interactions versus pure electrostatic ones. The results presented point to a new way of organizing molecules via electrical stimulus.     

In situ surface plasmon resonance measurements of self-assembled monolayers of ferrocenylalkylthiols under constant potentials.

A commercial system for surface plasmon resonance (SPR) possessing a batch-type flow channel has been simply modified so as to conduct in situ SPR measurements under polarization of an Au sensor chip at constant potentials. The modified instrument can monitor electrochemical reactions of monolayer materials with high stability and high reproducibility. The redox reaction of a self-assembled monolayer (SAM) of 6-ferrocenyl-1-hexanethiol (FcHT) induced the resonance angle shifts, the magnitudes of which accorded with the Nernst equation. The measurements in electrolyte solutions containing different electrolyte anions revealed that the SPR measurements detected ion pairing of electrolyte anions with oxidized FcHT. In cases of measurements in alkylsulfonic acid solution, simulation of the results based on the N-layer model has clarified that alkylsulfonate anions make an assembled layer on the FcHT SAM.     

Electrokinetic flow in a capillary with a charge-regulating surface polymer layer

An analytical study of the steady electrokinetic flow in a long uniform capillary tube or slit is presented. The inside wall of the capillary is covered by a layer of adsorbed or covalently bound charge-regulating polymer in equilibrium with the ambient electrolyte solution. In this solvent-permeable and ion-penetrable surface polyelectrolyte layer, ionogenic functional groups and frictional segments are assumed to distribute at uniform densities. The electrical potential and space charge density distributions in the cross section of the capillary are obtained by solving the linearized Poisson-Boltzmann equation. The fluid velocity profile due to the application of an electric field and a pressure gradient through the capillary is obtained from the analytical solution of a modified Navier-Stokes/Brinkman equation. Explicit formulas for the electroosmotic velocity, the average fluid velocity and electric current density on the cross section, and the streaming potential in the capillary are also derived. The results demonstrate that the direction of the electroosmotic flow and the magnitudes of the fluid velocity and electric current density are dominated by the fixed charge density inside the surface polymer layer, which is determined by the regulation characteristics such as the dissociation equilibrium constants of the ionogenic functional groups in the surface layer and the concentration of the potential-determining ions in the bulk solution.     

Analysis of effect of electrolyte types on electrokinetic energy conversion in nanoscale capillaries

An analytical study on the effect of electrolyte types on the electrokinetic energy conversion is presented using nanoscale cylindrical capillary, which is either positively or negatively charged. The sign of surface charge determines the role and concentration magnitude of ions in the capillary and the energy conversion performance. Our study shows that the electrokinetic energy conversion performance (maximum efficiency, pressure rise and streaming potential) are approximately identical for 1:1 (KCl), 2:1 (CaCl₂) and 3:1 (LaCl₃) electrolytes when capillary is positively charged. For negatively charged capillary, energy conversion performance degrades significantly with the increase of counter‐ion valence. For both positively and negatively charged capillaries, higher maximum efficiency can be resulted in low bulk concentration and surface charge density regimes. However, high maximum pressure rise generation for the pumping is found in the low bulk concentration and high surface charge density regimes. For the electric power generation, higher maximum streaming potential is found when both bulk concentration and surface charge density are low.     

Development and characterization of Au-YSZ surface plasmon resonance based sensing materials: high temperature detection of CO

Au-YSZ nanocomposite films exhibited a surface plasmon resonance absorption band around 600 nm that underwent a reversible blue shift and narrowed upon exposure to CO in air at 500 degrees C. A linear dependence of the sensing signal was observed for CO concentrations ranging between 0.1 and 1 vol % in an air carrier gas. This behavior of the SPR band, upon exposure to CO, was not observed when using nitrogen as the carrier gas, indicating an oxygen-dependent reaction mechanism. Additionally, the SPR band showed no measurable signal change upon exposure to CO at temperatures below approximately 400 degrees C. The oxygen and temperature-dependent characteristics, coupled with the oxygen ion formation and conduction properties of the YSZ matrix, are indicative of charge-transfer reactions occurring at the three-phase boundary region between oxygen, Au, and YSZ, which result in charge transfer into the Au nanoparticles. These reactions are associated with the oxidation of CO and a corresponding reduction of the YSZ matrix. The chemical-reaction-induced charge injection into the Au nanoparticles results in the observed blue shift and narrowing of the SPR band.     

Dendrimer-functionalized self-assembled monolayers as a surface plasmon resonance sensor surface

We report here a multistep route for the immobilization of DNA and proteins on chemically modified gold substrates using fourth-generation NH(2)-terminated poly(amidoamine) dendrimers supported by an underlying amino undecanethiol (AUT) self-assembled monolayer (SAM). Bioactive ultrathin organic films were prepared via layer-by-layer self-assembly methods and characterized by fluorescence microscopy, variable angle spectroscopic ellipsometry, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and attenuated total internal reflection Fourier transform infrared spectroscopy (ATR-FTIR). The thickness of the AUT SAM base layer on the gold substrates was determined to be 1.3 nm from ellipsometry. Fluorescence microscopy and AFM measurements, in combination with analyses of the XPS/ATR-FTIR spectra, confirmed the presence of the dendrimer/biopolymer molecules on the multilayer sensor surfaces. Model proteins, including streptavidin and rabbit immunoglobulin proteins, were covalently attached to the dendrimer layer using linear cross-linking reagents. Through surface plasmon resonance measurements, we found that sensor surfaces containing a dendrimer layer displayed an increased protein immobilization capacity, compared to AUT SAM sensor surfaces without dendrimer molecules. Other SPR studies also revealed that the dendrimer-based surfaces are useful for the sensitive and specific detection of DNA-DNA interactions. Significantly, the multicomponent films displayed a high level of stability during repeated regeneration and hybridization cycles, and the kinetics of the DNA-DNA hybridization process did not appear to be influenced by surface mass transport limiting effects.     

Electrokinetics in nanochannels: part II. Mobility dependence on ion density and ionic current measurements

In the first of this two-paper series, a new model was developed for calculating the electric potential field in a long, thin nanochannel with overlapped electric double layers. The model takes into account the dependence of ion mobility on local ion densities and pH. This model is used here to study and demonstrate the effect of ion density and pH on ionic current measurements. A comparison is shown of predictions based on each of three boundary conditions, as studied in Part I. The model developed in Part I is validated by comparing simulations with measurements of ionic current as a function of sodium borate concentration. Results show that predictions based on extended Debye-Hückel theory for ion mobility significantly improve the accuracy of simulations, but that these do not predict exact scaling behavior. A simple bulk conductivity measurement used as input parameter for the simulations, in place of the predicted bulk conductivity (K(0)), guarantees agreement with data in the thin EDL region. Results also indicate that the charge regulation boundary condition, complemented with an adequate bulk electrolyte model, provides better agreement with experimental trends than the specified zeta potential or specified surface net charge boundary conditions. Further, it is shown that currents due to advection (by electroosmotic flow) are in all cases studied less than 25% of the total current in the system.     

Intrinsic charge and Donnan potentials of grafted polyelectrolyte layers determined by surface conductivity data

In order to characterize grafted polyelectrolyte layers based on electrokinetic measurements a theory of the surface conductivity Ksigma was developed, starting from the model of thick polyelectrolyte layers with uniform segment distribution and dissociable groups with an unknown pK value. According to this model the inner part of the polyelectrolyte layer adjacent to the substrate is considered to be isopotential while the potential decay occurs in a zone near the solution side of the layer. A simple equation for the Donnan potential psiD as a function of pH, pK, electrolyte concentration C0, and volume charge density rho was obtained. In the derived equation Ksigma is directly related to psiD while the other terms have less influence on the magnitude of Ksigma and can be accounted for in a second approximation using psiD as determined from the measured Ksigma. Evaluation of the suggested model indicates that Ksigma measurements provide an effective method to characterize polyelectrolyte layers by analyzing the dependence of psiD on pH and C0: The magnitude of Ksigma yields information about the surface charge at complete dissociation of the ionizable groups. The dependence of Ksigma on pH and C0 can be used for the determination of the pK value of the dissociating functions and the segment volume fraction of the polyelectrolyte can be estimated using the measured value of rho.     

Gold nanostar-enhanced surface plasmon resonance biosensor based on carboxyl-functionalized graphene oxide

A new high-sensitivity surface plasmon resonance (SPR) biosensor based on biofunctional gold nanostars (AuNSs) and carboxyl-functionalized graphene oxide (cGO) sheets was described. Compared with spherical gold nanoparticles (AuNPs), the anisotropic structure of AuNSs, which concentrates the electric charge density on its sharp tips, could enhance the local electromagnetic field and the electronic coupling effect significantly. cGO was obtained by a diazonium reaction of graphene oxide (GO) with 4-aminobenzoic acid. Compared with GO, cGO could immobilize more antibodies due to the abundant carboxylic groups on its surface. Testing results show that there are fairly large improvements in the analytical performance of the SPR biosensor using cGO/AuNSs-antigen conjugate, and the detection limit of the proposed biosensor is 0.0375 μg mL⁻¹, which is 32 times lower than that of graphene oxide-based biosensor.     

Distribution of local anesthetics in lipid membranes

Absorption of local anesthetics into lipid membranes and adsorption onto their surfaces were studied as a function of the pH of aqueous bulk solutions by measuring lipid vesicle electrophoretic mobility, the partition of the anesthetics between the aqueous and membrane phases by the use of fluorescence and radioactive tracer methods, and the effect of the anesthetics on interfacial tension of lipid monolayers formed at the oil/aqueous interface.

At a pH much lower than the pK_a value of the local anesthetic, the charged form of the local anesthetic was only adsorbed onto the membrane surface, as determined from vesicle electrophoretic mobility, radioisotope tracer and the monolayer surface tension studies. Surface partition coefficients of the charged form of the local anesthetics on phosphatidylcholine and phosphatidylserine membranes were obtained from the data of electrophoretic mobilities for lipid vesicles. The surface partition coefficients of various local anesthetics paralleled those of the bulk partition coefficients.

As the pH of the solutions increased, the adsorbed amount of the charged form of the anesthetic at the membrane interface decreased, while the absorption of the uncharged form of the local anesthetic into the membrane increased. The total amount of local anesthetic adsorbed per unit area of the membrane generally increased as the pH of the solution increased. This was also observed from the measurements of the fluorescence of local anesthetics adsorbed into the membranes. At lower pH than that corresponding to the pK_a value of the local anesthetic, the amount of anesthetic adsorbed depended greatly upon the membrane surface charge. At a higher pH than its pK_a, it did not depend appreciably on the surface charge density of the membrane but did depend on the bulk partition coefficients between the aqueous and oil phases.     

Importance of bulk and surface excess concentration in fast atom bombardment mass spectrometry of small peptides

The surface tension of hydrophilic and hydrophobic peptides in glycerol solution at various concentrations is measured by the du Nouy ring method. From these values the surface excess concentration is calculated by means of the Gibbs adsorption equation. The behaviour of the surface excess peptide concentration on the fast atom bombardment mass spectrometric response (protonated molecular ion) as a function of the bulk peptide concentration in glycerol is discussed in terms of parameters commonly used in surface chemistry. The experimental results showed a straightforward correlation between the sputtering of protonated molecular ions of peptides and surface excess peptide concentration. Further, there is good agreement with a model involving desorption/ionization in the first layers of the liquid matrix surface. It is additionally demonstrated that the surface excess concentration of each peptide will be different in glycerol solutions of identical bulk concentration and, as a consequence, any differences in protonated molecular ion yield will reflect differences in the surface activity of the peptides, which explains suppression phenomena in peptide mixtures such as tryptic peptide digest. Based on this finding, it can be assumed that a difference observed in the mass spectrometric response does not represent a substantial difference in ionization efficiency.     

Methanol Oxidation at Platinum in Alkaline Media: A Study of the Effects of Hydroxide Concentration and of Mass Transport

The hydroxide ion concentration dependence of the methanol oxidation reaction at Pt was studied using microelectrode voltammetry and rotating disk electrode voltammetry. Both methods suggest that the rate of methanol oxidation is limited by hydroxide mass transport at low hydroxide concentrations, while it is inhibited by hydroxide adsorption at high concentrations. It was possible to shift from the transport-limited regime to the inhibitory regime by varying the bulk concentration of hydroxide or by varying mass transport to the electrode. Rotating ring-disk electrode voltammetry was employed to qualitatively assess changes in the diffusion layer pH. The results indicated a decrease in the surface pH during methanol oxidation, as expected, but also that the pH reached a steady state during hydroxide transport limited methanol oxidation.     

Triggering blue-red transition response in polydiacetylene vesicles: an electrochemical surface plasmon resonance method

Electrochemical surface plasmon resonance (E-SPR) was used to investigate whether the chromic properties of a polydiacetylene (PDA) vesicle films, adsorbed onto an ultra-thin gold electrode, could be triggered by applied potential. This approach constitutes a preliminary model for a novel approach to the use of a triggered chromic transition, as an indicator of biorecognition headgroup binding in these materials. A PDA chromic blue-red transition was identified in E-SPR against the background Deltaepsilon(e) and Deltaepsilon(m). The latter resulted in a ca. 100 mDeg V(-1) shift in the SPR minimum, in the presence of PDA, with the PDA shielding changes in epsilon(e). Electrochemical charge transfer processes in the pre-oxide/oxide anodic region with adsorbed oxygen and hydroxide, involving a change in Au redox state (Au(0)/Au(+)) were visible in the SPR, due to a change in the gold layer thickness and gold oxide layer. However, the cathodic processes, not involving a change in the Au redox state or a increase/decrease in the surface layer dielectric, did not cause a change in the SPR. Based on this, dramatic changes in the optical properties of the adsorbed PDA film could be triggered at an applied cathodic potential, and were identified using SPR. These correlated with a pH-induced chromic transition. Both protonation and ion binding, linked with headgroup environment, were implicated in causing structural transitions in the adsorbed vesicle layer that may also be linked with their bulk optical properties.     

Preferential adsorption of amino-terminated silane in a binary mixed self-assembled monolayer

The composition and structure of a binary mixed self-assembled monolayer (SAM) of 3-aminopropyltriethoxysilane (APS, NH(2)(CH(2))(3)Si(OCH(2)CH(3))(3)) and octadecyltrimethoxysilane (ODS, CH(3)(CH(2))(17)Si(OCH(3))(3)) on a silicon oxide surface have been characterized by water contact-angle measurements, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and sum frequency generation (SFG) vibrational spectroscopy. XPS demonstrated that APS in the mixed SAM is significantly enriched in comparison to that in solution, indicating the preferential adsorption of APS during the SAM formation. AFM observations showed that the mixed SAM becomes rougher. SFG revealed that the coadsorption of APS induced a conformation disordering in the ODS molecules present in the mixed SAM. The surface enrichment of APS has been explained in terms of differences in the surface adsorption rates of the two components as well as in the self-congregation states of APS molecules in the bulk solution. Furthermore, the structure of the water molecules on the mixed SAM surface in contact with the aqueous solutions at different pH's has also been studied. The results indicate that the mixed-SAM modified surface is positively charged at pH < 5 and negatively charged at pH > 7.     

Charge regulation and local dielectric function in planar polyelectrolyte brushes

Understanding the effect of inhomogeneity on the charge regulation and dielectric properties, and how it depends on the conformational characteristics of the macromolecules is a long-standing problem. In order to address this problem, we have developed a field-theory to study charge regulation and local dielectric function in planar polyelectrolyte brushes. The theory is used to study a polyacid brush, which is comprised of chains end-grafted at the solid-fluid interface, in equilibrium with a bulk solution containing monovalent salt ions, solvent molecules, and pH controlling acid. In particular, we focus on the effects of the concentration of added salt and pH of the bulk in determining the local charge and dielectric function. Our theoretical investigations reveal that the dipole moment of the ion-pairs formed as a result of counterion adsorption on the chain backbones play a key role in affecting the local dielectric function. For polyelectrolytes made of monomers having dipole moments lower than the solvent molecules, dielectric decrement is predicted inside the brush region. However, the formation of ion-pairs (due to adsorption of counterions coming from the dissociation of added salt) more polar than the solvent molecules is shown to increase the magnitude of the dielectric function with respect to its bulk value. Furthermore, an increase in the bulk salt concentration is shown to increase the local charge inside the brush region.     

How accurate is Poisson-Boltzmann theory for monovalent ions near highly charged interfaces?

Surface sensitive synchrotron X-ray scattering studies were performed to obtain the distribution of monovalent ions next to a highly charged interface. A lipid phosphate (dihexadecyl hydrogen-phosphate) was spread as a monolayer at the air-water interface to control surface charge density. Using anomalous reflectivity off and at the L3 Cs+ resonance, we provide spatial counterion (Cs+) distributions next to the negatively charged interfaces. Five decades in bulk concentrations are investigated, demonstrating that the interfacial distribution is strongly dependent on bulk concentration. We show that this is due to the strong binding constant of hydronium H3O+ to the phosphate group, leading to proton-transfer back to the phosphate group and to a reduced surface charge. The increase of Cs+ concentration modifies the contact value potential, thereby causing proton release. This process effectively modifies surface charge density and enables exploration of ion distributions as a function of effective surface charge-density. The experimentally obtained ion distributions are compared to distributions calculated by Poisson-Boltzmann theory accounting for the variation of surface charge density due to proton release and binding. We also discuss the accuracy of our experimental results in discriminating possible deviations from Poisson-Boltzmann theory.     

Application of octadecanethiol self-assembled monolayer to cholesterol biosensor based on surface plasmon resonance technique

Octadecanethiol (ODT) self-assembled monolayer (SAM) prepared onto gold-coated glass plate has been modified by using nitrene reaction of 1-fluoro-2-nitro-4-azidobenzene (FNAB) that further covalently binds to cholesterol oxidase (ChOx) via thermal reaction. FNAB acts as a bridge (cross-linker) between SAM and ChOx. The ChOx/FNAB/ODT/Au electrode thus fabricated has been characterized using contact angle (CA) measurements, UV-vis spectroscopy, electrochemical techniques and X-ray photoelectron spectroscopy (XPS) technique, respectively. This ChOx/FNAB/ODT/Au bioelectrode has been utilized for estimation of cholesterol in solution using surface plasmon resonance (SPR) technique. This SPR based cholesterol biosensor has linearity from 50 to 500 mg/dl of cholesterol in solution with lower detection limit of 50 mg/dl and shelf life of about 2 months when stored at 4 °C.     

银电极表面异亮氨酸单分子膜结构和表面性质的表面增强拉曼光谱研究

利用表面增强拉曼光谱(SERS)技术研究了在粗糙化银电极表面吸附的异亮氨酸自组装单层膜结构及其表面性质随溶液酸碱性和电极电位改变的特征.研究结果表明溶液pH值的变化并没有显著改变异亮氨酸分子在银电极表面以去质子化羧基吸附为主的特征.借助于高氯酸根离子这一SERS光谱探针,对异亮氨酸单分子膜的表面酸碱性质进行了表征和分析.而就电位改变对该单分子膜结构的影响而言,在所研究的电位范围内,单分子膜中的异亮氨酸分子是通过去质子化羧基与氨基两个位点而吸附的,且吸附作用随电位负移而呈现有规律的变化.     

Modeling protein binding and elution over a chromatographic surface probed by surface plasmon resonance

Surface plasmon resonance (SPR) spectroscopy is used as a scaled-down, analytical, pseudo-chromatography tool for analyzing protein binding and elution over an ion-exchange surface under cyclic sorption conditions. A micrometric-scale adsorption surface was produced by immobilizing a typical ion exchange ligand – diethylaminoethyl (DEAE) – onto commercially available planar gold sensor chip surfaces pre-derivatized with a self-assembled monolayer of 11-mercaptoundecanoic acid with known density. An explicit mathematical formulation is provided for the deconvolution and interpretation of the SPR sensorgrams. An adsorption rate model is proposed to describe the SPR sensorgrams for bovine serum albumin, used here as model protein, when the DEAE surface is subjected to a cyclic series of binding and elution steps. Overall, we demonstrate that the adsorption rate model is capable of quantitatively describing BSA binding and elution for protein titers from dilute conditions up to overloaded conditions and a broad range of salt concentrations.