锌-二氧化锰锌离子电池：一个研究型综合性化学实验的设计与实践

面向国家“双碳战略”需求,结合科技前沿和高校学生科研实践,设计了以低成本和高安全性为主要优势的锌-二氧化锰(Zn-MnO₂)二次电池,并形成了一个标准化的物理化学综合实验。本实验首先通过水热法制备了α-MnO₂,采用X射线衍射和扫描电子显微镜对制得α-MnO₂的结构与形貌进行了表征,随后使用电池测试仪对锌片负极与α-MnO₂正极组装成的Zn-MnO₂锌离子电池进行了循环伏安、倍率和循环稳定性等电化学性能测试。该实验将科研热点转化为综合教学实验,从实验室走进日常生活,集化学材料合成、表征与电池电化学性能测试于一体,实验的不同模块可满足多种教学需求。此外,探究式学习与综合性操作相结合有助于提高学生的实验兴趣及化学实验操作水平;在教学过程中融入思政元素,渗透绿色理念,引导学生形成安全无污染的化学实验意识和可持续发展思想。     

一种快速生成铜锈的实验方法

本实验运用电化学的方法,将简单易得的材料用于快速制备铜锈,在几十秒到几分钟不等的时间就会迅速产生铜锈。依据XRD图谱对产物进行分析,确定了形成碱式氯化铜(Cu₂Cl-(OH)₃)的最佳电解质溶液配比,并成功制备了碱式碳酸铜(Cu₂(CO₃)(OH)₂)。实验结果可用作中学化学教学演示实验和学生实验,也可用于指导学生探究不同条件对铜锈制备的影响,进行探索性学习练习。此外,相关实验原理可提供试题情境对学生学习质量进行评价。     

碳布负载氢氧化镍电极材料的合成及其电容性能分析——推荐一个综合化学实验

作为超级电容器的电极材料,Ni(OH)₂具有理论比电容高、来源丰富、环境友好等优点,但较低的电导率影响了其实际性能。解决该问题的一种有效方法是在碳布导电基底上原位生长Ni(OH)₂薄膜。以此为基础设计综合化学实验,通过Ni(OH)₂/碳布薄膜电极的制备、表征及电化学性能测试,使学生进一步理解化学平衡原理在材料合成中的应用,了解材料的基本表征方法,掌握循环伏安法、恒流充放电法等电化学分析方法在实际测试中的运用与解析,从而达到巩固电化学理论知识、培养学生的实验技能、提高学生综合实验能力的目的。本实验的开展还可以帮助学生了解储能领域的科技前沿,激发学生的科研兴趣,培养学生的科研创新意识,适合在大学化学实验中推广应用。     

BMIMBF4中2-氨基-3-氯-1,4-萘醌电化学捕获CO2的机理

利用循环伏安法（CV）和现场红外光谱电化学技术研究了2-氨基-3-氯-1,4-萘醌（ACNQ）在1-丁基-3-甲基咪唑四氟硼酸盐（BMIMBF₄）中电化学捕获CO₂的机理.研究结果表明,当体系中不存在CO₂时,ACNQ在BMIMBF₄中经历可逆的两步一电子过程;当体系中引入CO₂时,电化学还原过程中形成的二价阴离子（ACNQ^2-）作为亲核试剂,可攻击CO₂的亲电子碳中心,形成稳定的CO₂加合物.对电化学捕获CO₂的化学计量进行了评估,结果表明,1摩尔的ACNQ^2-可捕获1摩尔的CO₂.结合B3LYP方法在6-311++G^**水平上计算分析了反应中CO₂加合物可能的结构.     

磷酸铁锂表面碳包覆研究进展

橄榄石结构的LiFePO₄具有电压平台平稳、价格低廉、原料丰富和环境友好等优点,得到了人们的广泛关注. 然而,纯LiFePO₄的离子和电子导电性较差,其大范围应用受限. 研究表明,对LiFePO₄表面进行碳包覆可以有效提升其电化学性能. 结合国内外研究现状,本文综述了不同的碳包覆方法、碳源种类对LiFePO₄电化学性能的影响,以及碳包覆提升LiFePO₄正极材料电化学性能的作用机制.     

“碳达峰碳中和”中的无机化学问题探究——PBL教学实践

依托国家级一流本科课程，融合PBL (Problem-Based Learning)开展混合式课堂教学，设计了PBL教学案例——“碳达峰碳中和”中的无机化学问题探究。引导学生从大气中CO₂污染产生的化学反应过程入手，分析基于降低碳排放开发的CO₂转化新技术的化学反应原理，探讨不同CO₂转化技术的优势和劣势。通过PBL教学实践，将化学理论与工业实践深度融合，在夯实理论基础的同时，使学生的学习能力和解决问题能力得到提升。通过思政教育有机融入，使学生了解到我们国家科技的进步，体现课程教学的立德树人。     

有机碳源对LiTi2(PO4)3/C复合水系负极性能的影响

采用喷雾干燥与高温煅烧相结合的方法制备了球形LiTi₂(PO₄)₃/C复合水系负极材料, 探讨了基于不同包覆机制的有机碳源和碳包覆量对LiTi₂(PO₄)₃/C复合负极电化学性能的影响. 结果表明, 碳包覆量过低时不足以阻止水的侵蚀, 而碳含量过高时锂离子扩散的阻力过大, 磷酸钛锂电极最优碳包覆质量分数为13%. 碳包覆的均匀性和包覆层厚度是影响电极性能的两个重要因素. 基于原位聚合包覆机制的聚多巴胺包覆磷酸钛锂颗粒最均匀, 碳化后微晶结构较好, 具有良好的电子导电性, 以聚多巴胺为碳源制备的LiTi₂(PO₄)₃/C复合负极性能最优.     

血红蛋白在二氧化铈修饰电极上的直接电化学

将二氧化铈(CeO₂)与酶复合修饰电极, 采用循环伏安法研究了血红蛋白(Hb)在CeO₂修饰的玻碳电极上的电化学行为. 实验表明, 固定在CeO₂材料上的Hb, 不仅能有效地与电极表面进行直接电子转移, 而且能够保持其生物催化活性. 制得的Nafion/CeO₂/Hb/GC修饰电极的电子传递速率k_s为(0.68±0.09) s^－1, 对H₂O₂的检测限为1.013 μmol•L^－1, 重现性和稳定性较好. CeO₂在实验中体现出一定的生物相容性, 起到了促进Hb与电极之间进行直接电子传递的作用. CeO₂修饰电极进行蛋白质直接电化学测定以及酶生物电催化的成功实践, 为稀土氧化物材料在电化学传感领域中的应用开辟了思路.     

碳热还原辅助溶胶-凝胶法制备氟代聚阴离子型嵌/脱锂材料LiVPO4F/C

采用碳热还原辅助溶胶-凝胶法合成了锂二次电池正极材料LiVPO₄F/C, 探讨煅烧温度和煅烧时间对所制备材料纯度、结构和电化学性能的影响. 采用X射线衍射(XRD), 扫描电子显微镜(SEM), 恒流充放电, 电化学阻抗谱(EIS)和循环伏安(CV)等手段对不同煅烧温度和时间所得的材料进行结构表征和电化学性能测试. 当煅烧时间为4 h 时, 温度为450 ℃时, 能够得到纯相LiVPO₄F/C, 在0.1C、0.5C和1.0C倍率下, 电池放电比容量分别为193.2、175.6 和173.7 mAh·g^-1. 随着煅烧温度升高, Li₃V₂(PO₄)₃杂相逐渐增多, 650 ℃煅烧后的材料Li₃V₂(PO₄)₃ 成为主相. 优化煅烧时间也能够有效控制Li₃V₂(PO₄)₃ 杂相的生成, 能得到电化学性能良好的LiVPO₄F/C. 当煅烧温度为550 ℃时, 反应3 h后得到的产物综合电化学性能最优.     

表面水热碳层对磁性NiFe2O4八面体光催化活性的影响

采用葡萄糖水热碳化法合成了一系列碳层包覆的NiFe₂O₄核壳八面体(NiFe₂O₄@C). 通过调控葡萄糖的含量可以有效控制NiFe₂O₄表面包覆的碳层厚度. 利用X射线衍射(XRD)、 拉曼光谱(Roman)、 X射线光电子能谱(XPS)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)和紫外-可见漫反射光谱(UV-Vis DRS)等对NiFe₂O₄@C的组成、 结构、 形貌和光学性能进行了表征. 考察了表面水热碳层对NiFe₂O₄光催化降解亚甲基蓝(MB)性能的影响. 结果表明, NiFe₂O₄的光催化活性很大程度上依赖于在其表面包覆的碳层厚度, 碳层厚度为5.5 nm的NiFe₂O₄@C-3展现了最佳的光催化活性. 荧光光谱(PL)、 瞬态光电流和电化学阻抗谱(EIS)表征结果证明, NiFe₂O₄@C的光催化性能的提升归因于在NiFe₂O₄核和碳壳之间形成了异质结, 有效地促进了光生载流子的传输和分离效率. NiFe₂O₄@C复合材料展现了较好的稳定性和可回收性, 在污水处理方面有很大的应用潜力.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Investigation of Kinetics of Solid-Phase Synthesis of Lithium Orthosilicate

The kinetics of the interaction between lithium carbonate and silica with various degrees of dispersion was investigated by TG and DTA methods. It was found that the utilization of pyrogenic silica with a specific surface area of about 300 m²g^-1 instead of aerosil with one of 175 m²g^-1 leads to an increase of the reaction rate between lithium carbonate and silica, which depends on the formation and growth of lithium orthosilicate crystals in the first stage, and is conditioned by the diffusion of lithium and oxygen ions through the lithium orthosilicate layer formed at temperatures above 800 K. This supposition is supported by the kinetic analysis results obtained with the use of the different models. The optimal regime of heating is recommended. This revised version was published online in July 2006 with corrections to the Cover Date.     

小环化合物中饱和碳质子化学位移的计算

小环化合物由于其张力、构型、构象和各向异性效应等原因,环碳上质子化学位移缺乏规律性,难以预测,对此作者曾提出一种近似算法。本文根据303种小环化合物中饱和碳质子的化学位移实验数据,将适于计算这类质子化学位移的公式表述为:     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

结合实际发展电化学科学─—武汉大学电化学研究室工作简介

结合实际发展电化学科学─—武汉大学电化学研究室工作简介查全性,陆君涛（武汉大学化学系电化学研究室,武汉４３００７２）在物理化学的众多分支学科中,电化学长期保持良好的发展势头。除了电化学所研究的体系（溶液、电极／溶液界面等）具有广泛的基础意义外,促使电...