Distribution of Zinc Oxide Nanocrystals in a Polymer Film

The structure of polymer films modified with zinc oxide nanocrystals was studied by the optical absorption and small-angle X-ray scattering methods. Small-angle X-ray scattering allows determination of the nanoparticle size distribution function, which is the decisive factor in predicting the optical properties of heterophase materials, including filled polymer films. The optical absorption spectrum of an acrylate polymer film doped with 1.6 wt % zinc oxide nanocrystals approaches the ideal absorber spectrum, which allows this material to be recommended for use as a protective color filter.     

Thermogravimetric analysis of thermal stability of poly(methyl methacrylate) films modified with photoinitiators

Films of poly (methyl methacrylate) (PMMA) were prepared by the addition of photoinitiator to the polymer. The influence of five organic photoinitiators on thermal stability of poly(methyl methacrylate) was studied by thermogravimetric analysis. Next, the PMMA films doped with these photoinitiators were UV irradiated and investigated in terms of changes in their thermal stability. It was found that the photoinitiators had accelerated thermal degradation of non-irradiated PMMA films due to the action of free radicals coming from the additives’ thermolysis. For UV-irradiated specimens, the effect of photoinitiator on PMMA thermal stability depended on the chemical structure of organic compound modifying the polymer. In general, thermal stability of irradiated samples was higher in the presence of additives. Thermal destruction of modified PMMA can be explained by the formation of resonance structures in aromatic photoinitiators and consumption of energy in dissipation processes.     

Electron irradiation induced microstructural modifications in BaCl2 doped PVA: A positron annihilation study

Thin films of pure and 10 wt% BaCl₂ doped poly(vinyl alcohol) (PVA) were prepared by solution casting method. These films were subjected to electron irradiation for different doses ranging from 0 to 400 kGy in air at room temperature. The effect of electron irradiation on the optical and free volume related microstructures of these polymer films was studied using positron annihilation lifetime spectroscopy, FTIR and UV-vis techniques. The FTIR spectral studies indicate that the electron irradiation induces chemical modifications within the doped PVA, which results in chain scission as well as cross-linking of the polymer. The positron lifetime study on these irradiated polymers shows that the chain scissions and cross-linking within the polymer matrix affect the free volume content and hence the microstructure. The UV-vis optical absorption studies show that the induced microstructural change by electron irradiation also modifies the optical properties. Using UV-vis spectra, the optical energy band gap was estimated and it decreases with increase in electron dose. A correlation between positron results and optical results is obtained and electron irradiation induced microstructure modifications within the doped polymer are understood. The results highlight the usefulness of positron annihilation technique in the study of the microstructure of irradiated polymers.     

掺铽聚丙烯薄膜的研究

合成了化学组成为Ｙ１－ｘＴｂｘＬ３和Ｌａ１－ｘＴｂｘＬ３（Ｌ＝Ｃ８Ｈ７Ｏ２）的两种荧光粉，将其掺杂到聚丙烯中，制得两种聚丙烯荧光薄膜，通过测试机械性能，微分扫描式量热法分析，紫外分光光谱和荧光光谱测定，研究膜的物理和荧光性能。结果表明：这两种掺铽聚丙烯膜在３６５或２５４ｎｍ紫外光激发下，都能发出黄绿色荧光。掺入Ｙ１－ｘＴｂｘＬ３的聚丙烯膜的荧光强度大于掺Ｌａ１－ｘＴｂｘＬ３的聚丙烯膜。     

Effect of a natural polyphenolic extract on the properties of a biodegradable starch-based polymer

A polyphenol-containing extract from winery bio-waste (EP) has been used as an additive for a starch-based polymer (Mater-Bi). EP was used to tailor Mater-Bi properties, thus avoiding the use of synthetic polymer additives. It was found that EP was able to efficiently modulate the processing, mechanical, thermal and biodegradation properties. The observed decrease in melt viscosity showed that EP could improve productivity in polymer processing. Owing to the plasticizing activity of the additive, larger values of elongation at break were found. Moreover, the Mater-Bi crosslinking, which occurs upon thermal aging, was delayed in the presence of EP. Finally, the bio-disintegration rate of doped Mater-Bi decreased, thus suggesting that EP acted as an antimicrobial agent by interfering with the bio-digestion of the polymer films.     

Wetting properties at the surface of iota-carrageenan-based edible films

Surface properties of edible films composed of a polymeric matrix of carrageenan in association with hydrophobic material were studied by contact angle measurements. The use of this technique not only in a static mode but also in a dynamic way enables investigation of surface hydrophobicity as well as surface wettability. The absorption flux inside the material can be estimated from the wetting kinetic, which can be very useful to quickly compare water barrier efficiency of the tested films. Comparison of carrageenan films with films containing known amounts of additives enables understanding and correlation of changes of the surface properties with the nature of used additives (glycerol used as a plasticizer, glycerol monostearate used as a surfactant, and fat) and their influence on the orientation of polymer chains at the surface during film formation. Very different responses were observed from one surface of the film (film-casting-support interface) to the other (film-air interface), which could be also attributed to the influence of the support on the polymer and to macromolecular orientation during drying after casting.     

含手性末端基偶氮聚合物膜的全息光栅研究

偶氮苯侧链型高分子由于其含有偶氮苯基团 ,在光作用下会发生可逆的顺反异构过程 ,具有光致取向特性 ,在光学处理、衍射光学、投影显示、光开关等许多方面具有潜在的应用性[1] .近 1 0多年来国内外学者对此类化合物进行了广泛的研究 ,已有文献报道可利用Ａｒ+激光束在偶氮苯聚合物薄膜上直接“写入”表面凸起光栅 ,并且通过原子力显微镜观测到光栅起伏 .这种光栅很稳定 ,并可以利用光学方法“擦去” .偶氮苯聚合物上述独有的性质引起了许多学者的兴趣[2 ,3] .另一方面 ,由于旋光性聚合物在光学物理性质上的优势 ,我们已将手性基团引入偶氮苯…     

Azo dye doped polymer films for nonlinear optical applications

Azo dye doped polymer films were prepared on glass substrates using spin-coating technique. FTIR, UV-Vis spectra and PL measurements were recorded to characterize the structure of the metanil yellow doped PVA films. Surface morphology and thickness of the films were studied using AFM and FESEM. The magnitude of both real and imaginary parts of third-order nonlinear susceptibility χ3 of metanil yellow were determined by the Z-scan technique. The nonlinear refractive index n2 and the nonlinear absorption coefficient β of the azo dye doped polymer films were calculated respectively. The real part of the third-order susceptibility χ3 is much larger than its imaginary part indicating that the third-order optical response of the metanil yellow doped PVA films is dominated by the optical nonlinear refractive behavior.     

Molecular design of polymer coatings capable of photo-triggered stress relaxation via dynamic covalent bond exchange

Polymer coatings are frequently used to modify surface properties of inorganic substrates. However, the disparity in physical properties between polymer film and substrate often leads to residual stress development, which can be deleterious to the overall performance of coated materials. This work reports the molecular design of polymer films that dissipate stress upon irradiation with ultraviolet (UV) light. These polymers are synthesized by post-polymerization modification of the reactive polymer, poly(2-vinyl-4,4-dimethyl azlactone), to introduce dynamic crosslinks capable of light-initiated addition transfer fragmentation chemistry. Using a custom-built optical cantilever, contrasting film stress responses are observed between films containing dynamic bonds and analogous control films after UV light irradiation, which indicate successful stress relaxation. Further experiments demonstrate the complete relaxation of residual stress in dynamic films after an extended exposure, thereby generating a “stress-free” film. Films fabricated using this approach can be easily tailored to incorporate additional moieties to introduce desired surface properties for future application in a wide array of coatings.     

The electro‐optical properties of ‘charged’ PDLCs

The application of high intensity electric fields to polymer dispersed liquid crystal (PDLC) films can induce changes in their electro‐optical properties and morphology. In particular, a quasilinear electro‐optical response to an external electric field can be achieved if an internal built‐in d.c. field is induced. In this work, we show how the liquid crystal/polymer weight ratio influences the electro‐optical response of ‘charged’ PDLCs, i.e. of PDLC films after the application of a high intensity electric field. We observed that a quasilinear electro‐optical response can be achieved in a well determined range of composition. Larger liquid crystal concentrations are unable to maintain the built‐in field, while PDLCs with lower liquid crystal loadings do not allow the onset of a built‐in d.c. field.     

Optical properties of nanostructure boron doped NiO thin films

Boron doped NiO films were prepared by sol–gel method. The effects of B content on the morphological and optical properties of NiO films were studied with atomic force microscopy, and optical characterization method. The average transmittance at the visible region is reached to 75 % for lower doped films (0.1 and 0.2 % B), whereas, the recorded average value of transmittance was about 62 % for doped film with 1 % B throughout the region. The optical energy gap value for pure NiO film was found to be 3.73 eV. These values were affected by B doping with non-monotonic variation and reached to 3.64 eV for 0.1 % B doped NiO. Also, the refractive index dispersion and dielectric constants of the NiO films were studied throughout the investigated range of wavelengths. The obtained results indicate that the optical parameters of the NiO film are controlled with boron doping.     

Role of Organic Additives in the Sol-Gel Synthesis of Porous CaF2 Anti-Reflective Coatings

Porous CaF₂ anti-reflective coating films were prepared by the sol-gel method. Effects of organic additives on deposition and optical properties of the films were investigated. Amino alcohols (2-aminoethanol, 2-dimethylaminoethanol, and triethanolamine) and alcohols with larger molecular weights (ethyleneglycol, 2-methoxyethanol, cyclohexanol, and 2-(2-n-butoxyethoxy)ethanol) were chosen as the organic additives. Among these additives, cyclohexanol was the most effective to control the surface morphology and the optical properties of the films. By changing the amount of cyclohexanol in the coating solution, it was possible to control the optical thickness of the CaF₂ films. Accordingly, the wavelength giving the maximum transmittance could be changed in the UV region.     

Polymethacrylate polymers with appended aluminum(III)-tetraphenylporphyrins: Synthesis, characterization and evaluation as macromolecular ionophores for electrochemical and optical fluoride sensors

The synthesis and characterization of a novel polymethacylate polymer with covalently linked Al(III)-tetraphenylporphyrin (Al(III)-TPP) groups is reported. The new polymer is examined as a potential macromolecular ionophore for the preparation of polymeric membrane-based potentiometric and optical fluoride selective sensors. To prepare the polymer, an Al(III) porphyrin monomer modified with a methacrylate functionality is synthesized, allowing insertion into a polymethacrylate block copolymer (methyl methacrylate and decyl methacrylate) backbone. The resulting polymer can then be incorporated, along with appropriate additives, into conventional plasticized poly(vinyl chloride) films for testing electrochemical and optical fluoride response properties. The covalent attachment of the Al(III)-TPP ionophore to the copolymer matrix provides potentiometric sensors that exhibit significant selectivity for fluoride ion with extended lifetimes (compared to ion-selective membrane electrodes formulated with conventional free Al(III)-TPP structure). However, quite surprisingly, the attachment of the ionophore to the polymer does not eliminate the interaction of Al(III)-TPP structures to form dimeric species within the membrane phase in the presence of fluoride ion. Such interactions are confirmed by UV/visible spectroscopy of the blended polymeric films. Use of the new polymer-Al(III)-TPP conjugates to prepare optical fluoride sensors by co-incorporating a lipophilic pH indicator (4′,5′-dibromofluorescein octadecyl ester; ETH7075) is also examined and the resulting optical sensing films are shown to exhibit excellent selectivity for fluoride, with the potential for prolonged operational lifetime.     

Polymer additive analysis by pyrolysis-gas chromatography. I. Plasticizers

Plasticizers are widely used in thermoplastic polymers to modify their physical properties and processibility. Plasticizers as well as most of the other additives in the polymer can be qualitatively analyzed by pyrolysis-gas chromatography (Py-GC) simultaneously with the polymer composition. The key to the successful analysis of plasticizers not only requires a comprehensive understanding of commercial plasticizers but also requires knowledge of the polymer and its applications, as well as the Py-GC technique. In this study, several plasticizers in different polymeric systems were studied to demonstrate the utility of Py-GC as a good tool for the characterization of these systems. The advantages of using Py-GC for plasticizer analysis are also discussed.     

Dielectric parameters of polystyrene films modified with fullerenes

The frequency dependences of the electrophysical parameters (capacitance, dielectric constant, dielectric loss tangent, and resistivity) of polystyrene films doped with small (up to 1 wt % C₆₀) additions of fullerenes were determined by dielectrometry. The composite materials obtained were concluded to be nonpolar. The dielectric constant as a function of the film composition passes through a minimum at 0.035 wt % C₆₀. The polymer preserves good insulating properties on doping with fullerenes.     

Electrochemical and optical characterization of p- and n-doped poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene

We study electrochemical p- and n-type doping in the well-known light-emitting polymer poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV). Doping reactions are characterized using cyclic voltammetry. Optical measurements including photoluminescence and UV/Vis/NIR transmission were performed on doped samples. We find that oxidation in MEH-PPV is a highly reversible reaction resulting in stable freestanding doped films, while the reduced form is unstable and the reaction irreversible. We discuss the dependence of doping reactions on scan rate, film thickness, salt type and concentration, and working electrode type. We observe the development of two additional broad absorption bands in both lightly and heavily doped films accompanied by a slight blueshift in the primary optical transition, suggesting bipolaron band formation. Finally we find that both p and n dopings result in extremely sensitive photoluminescence quenching. We propose a physical model for understanding electrochemical doping in MEH-PPV and the implications this has on the development of such technologies as polymer light-emitting electrochemical cells, electrochromic devices, actuators, and sensors.     

The surface and materials science of tin oxide

The study of tin oxide is motivated by its applications as a solid state gas sensor material, oxidation catalyst, and transparent conductor. This review describes the physical and chemical properties that make tin oxide a suitable material for these purposes. The emphasis is on surface science studies of single crystal surfaces, but selected studies on powder and polycrystalline films are also incorporated in order to provide connecting points between surface science studies with the broader field of materials science of tin oxide. The key for understanding many aspects of SnO₂ surface properties is the dual valency of Sn. The dual valency facilitates a reversible transformation of the surface composition from stoichiometric surfaces with Sn⁴⁺ surface cations into a reduced surface with Sn²⁺ surface cations depending on the oxygen chemical potential of the system. Reduction of the surface modifies the surface electronic structure by formation of Sn 5s derived surface states that lie deep within the band gap and also cause a lowering of the work function. The gas sensing mechanism appears, however, only to be indirectly influenced by the surface composition of SnO₂. Critical for triggering a gas response are not the lattice oxygen concentration but chemisorbed (or ionosorbed) oxygen and other molecules with a net electric charge. Band bending induced by charged molecules cause the increase or decrease in surface conductivity responsible for the gas response signal. In most applications tin oxide is modified by additives to either increase the charge carrier concentration by donor atoms, or to increase the gas sensitivity or the catalytic activity by metal additives. Some of the basic concepts by which additives modify the gas sensing and catalytic properties of SnO₂ are discussed and the few surface science studies of doped SnO₂ are reviewed. Epitaxial SnO₂ films may facilitate the surface science studies of doped films in the future. To this end film growth on titania, alumina, and Pt(1 1 1) is reviewed. Thin films on alumina also make promising test systems for probing gas sensing behavior. Molecular adsorption and reaction studies on SnO₂ surfaces have been hampered by the challenges of preparing well-characterized surfaces. Nevertheless some experimental and theoretical studies have been performed and are reviewed. Of particular interest in these studies was the influence of the surface composition on its chemical properties. Finally, the variety of recently synthesized tin oxide nanoscopic materials is summarized.     

Photochromic composites based on porous stretched polyethylene filled by nematic liquid crystal mixtures

A number of the novel photochromic polyethylene (PE)‐based liquid crystal composites were prepared and studied. The oriented stretched porous polyethylene films were used as the polymer matrices. Commercial liquid crystals doped with new photochromic compounds were introduced into PE films and photo‐optical properties of the obtained composites were investigated. It was shown that a director of nematic liquid crystals is highly oriented along the stretching axis of PE films resulting in noticeable linear dichroism of the PE composite films. New approaches for reversible or irreversible image recording on PE LC composites by UV irradiation were demonstrated. Copyright © 2009 John Wiley & Sons, Ltd.     

Electro-optical and dielectric study of multi-walled carbon nanotube doped polymer dispersed liquid crystal films

The self-organising property of nematic liquid crystals (LCs) was used to align multi-walled carbon nanotubes (MWCNT) dispersed in them. MWCNT not only well integrate in the matrix but also, even at very low concentration, have a detectable effect on the LC properties that can be very attractive for display applications. In the present work, MWCNT were doped (0–0.5% wt/wt) in two different types of LCs. These MWCNT doped polymer dispersed LC (CPDLC) films were studied comprehensively using fundamental techniques. Polarising optical microscope (POM) and scanning electron microscope (SEM) techniques used for morphological study reveal that the LC droplet size remains unchanged with increase in MWCNT concentration. The electro-optical (EO) study performed by increasing voltage in steps of 10 V up to 100 V at an optimised frequency of 200 Hz and at temperature 25°C shows that the low MWCNT concentration films show good optical response than the higher one. The dielectric behaviour of CPDLC films in the frequency range 20 Hz to 20 MHz was investigated using precision impedance analyser. The obtained data were modelled with Debye and Cole-Cole methods to calculate relaxation time and distribution parameter (α). The zero value of α indicates Debye type relaxation processes.     

Effect of Material Structure and Additives on the Optical Properties of PP Cast Films

Summary. Polypropylene homopolymer and ethylene/propylene-random-copolymer cast films formulated with slip, anti-blocking, and acid scavenger aids were analyzed as to material structure and optical properties. The structural and topographical characterization was done by atomic force microscopy and by spectroscopic methods. Optical properties were determined using a hazemeter and an UV/VIS/NIR spectrophotometer. As to the effect of additives it was established that slip and anti-blocking aids migrate to and accumulate on the surface, resulting in increased surface roughness and larger scattering identities close to the surface. Acid scavenger additives were shown to contribute to less significant slip aid domains and hence to lower haze. In general, films without additives showed much better optical properties. The separation of haze into its bulk and surface components revealed that the total haze is dominated by surface haze.