不同极性的临界介质对孔道中甲醇的脱附和萃取作用

针对临界溶剂对多孔介质中甲醇的脱附和萃取作用,利用Monte Carlo (MC)方法考察了溶剂的分子结构与外在因素（孔道尺寸）对甲醇合成过程的影响。研究表明,极性溶剂丙酮能够促进甲醇脱附,而非极性溶剂正庚烷对孔道中甲醇有更强的萃取能力。在一定范围内,随孔道尺寸的增加,溶剂对甲醇的脱附能力增加,但对孔道中甲醇的萃取能力却减弱。     

加速溶剂萃取法提取海洋沉积物中正构烷烃的方法研究

采用加速溶剂萃取法(ASE)提取了海洋沉积物中的正构烷烃,并对ASE的萃取剂比例、萃取温度、静态萃取时间以及循环次数等实验条件进行优化。结果表明,当样品长碳链正构烷烃含量较高或需要检测长碳链正构烷烃含量时,可使用甲醇-二氯甲烷(1∶3)作为萃取剂;而甲醇-二氯甲烷(1∶9)适用于短碳链正构烷烃含量较高或需要检测短碳链正构烷烃含量的样品。加速溶剂萃取提取沉积物中正构烷烃的最佳条件为:萃取温度150℃,静态提取时间15 min,循环3次。在优化条件下,测定沉积物样品中正构烷烃的精密度除C15为20%外,其余为3%~14%,替代物回收率为84%~114%。相比于传统的索氏提取法,该方法的工作效率高、回收率高、精密度良好,适用于沉积物样品中正构烷烃的定量分析。     

烷烃混合物在Cu-BTC中的吸附与分离

用巨正则系综Monte Carlo (GCMC)和构型导向Monte Carlo (CBMC)相结合的方法模拟了298 K下甲烷-乙烷-丙烷体系以及正丁烷-异丁烷体系在1,3,5-苯三甲酸铜(II) (Cu-BTC)中的吸附行为. 结果表明, Cu-BTC对丙烷以及异丁烷的吸附分离都有较好的选择性. 通过我们发展的“材料剖面成像”方法研究了烷烃混合物在Cu-BTC中不同压力下的吸附位点, 从而进一步分析了烷烃混合物在Cu-BTC中的分离性能. 结果发现, 在吸附过程中主要存在着两种效应, 即能量效应和尺寸效应的竞争. 在甲烷-乙烷-丙烷体系中, 较高压力下, 由于尺寸效应的影响, 丙烷主要吸附在主孔道中, 而对甲烷和乙烷组分, 能量效应占主导地位, 从而导致乙烷主要吸附在四面体孔内, 甲烷则主要吸附在三角形孔窗外. 在正丁烷-异丁烷体系中, 能量效应起主导作用, 从而使异丁烷主要吸附在四面体孔内, 而正丁烷主要吸附在主孔道中.     

烷烃加氢异构化反应

综述了烷烃加氢异构化反应中的正碳离子异构和裂化机理、孔口与钥匙锁催化、择形催化及双分子机理,详细论述了分子筛基双功能催化剂酸性、金属、金属酸位比、孔道、晶粒尺寸和催化剂改性对烷烃加氢异构反应活性、异构选择性等的影响。论述了近期烷烃加氢异构催化剂改性的新方法。提出针对不同催化剂体系,根据反应机理提高异构催化剂活性和选择性的途径。     

甲醇催化转化制丙烯中HZSM-5分子筛的尺寸效应

甲醇催化制丙烯(MTP)是一个具有重要工业应用的研究课题, 目前普遍采用的催化剂是HZSM-5 分子筛. 通过调节分子筛合成原料的配比、晶化温度和晶化时间等参数, 对所制备的不同晶粒尺寸的HZSM-5 分子筛, 综合利用X射线衍射(XRD)、扫描电镜(SEM)、N₂吸附和氨气程序升温脱附(NH₃-TPD)等手段表征了其晶格结构、表观形貌、孔结构以及酸性质. 利用固定床反应装置对HZSM-5 分子筛甲醇催化制丙烯的活性和稳定性进行了评价, 并采用热重(TG)分析技术对催化剂的积炭性能进行了考察. 实验结果表明, HZSM-5 分子筛粒度的减小可以增加分子筛比表面积、孔体积, 同时有更多开放的孔口及短的孔道长度, 有利于反应物分子的吸附和传质,并降低了产物分子在孔道中的扩散距离及发生二次反应的几率, 提高了催化剂的抗积炭能力和容炭能力以及稳定性; 而且所合成的小尺寸分子筛单位质量的总酸量及强酸量均有不同程度的下降, 有利于提高目标产物丙烯的选择性.     

沸石在甲醇转化为烃过程中积炭性能的考察

用热重法(TGA)和程序升温脱附法(TPD)考察了几种不同孔道结构的沸石——毛沸石(HE),类毛—菱钾沸石(HSW),Fu-1,ZSM-5,ZSM-11,丝光沸石(HM)和Y 型沸石——在甲醇转化为烃时的积炭行为。认为甲醇在沸石上转化为烃时的积炭倾向不仅与沸石的孔道结构有关,而且也与其强酸部位(即TPD 谱的峰Ⅱ)的酸量有着密切关系。甲醇在所考察过的七种沸石上的积炭初速度有着如下排列顺序:HE>(HSW,HY)>HM>(HF,HZSM-5,HZSM-11);其除炭初速度的大小有着与积炭初速度一致的顺序。采用往ZSM-5沸石上添加磷或镁等化合物以改质的方法,可以调节沸石的酸性和孔道尺寸,使得沸石的抗积炭能力增强,有利于改善沸石催化剂的稳定性和选择性。甲醇在改质沸石催化剂上转化为烃时的积炭初速度有着下列顺序,Zn ZSM-5》HZSM-5>Mg ZSM-5>PZSM-5>MnZSM-5。     

Ag/SBA-15低温气相选择性催化氧化苯甲醇合成苯甲醛（英文）

以SBA-15为载体,采用浸渍法制备了不同Ag含量的Ag/SBA-15,通过N2吸附-脱附、X射线衍射、扫描电子显微镜、高分辨透射电子显微镜、X射线光电子能谱和电感耦合等离子体质谱对催化剂进行了表征.将Ag/SBA-15用于苯甲醇气相选择性催化氧化合成苯甲醛,研究了反应条件对转化率和选择性的影响.结果表明,Ag/SBA-15具有均一的一维孔道结构、较厚的孔壁(3–5 nm)及较大的比表面积(411–541 m2/g),其规整纳米空间的限域作用使一定负载量的Ag以纳米尺寸均匀分散于介孔SBA-15孔道内,增加了活性组分的比表面积.亲核性氧物种从Ag到SBA-15表面的氧溢流,提高了低温下Ag/SBA-15对苯甲醇气相选择性氧化合成苯甲醛的催化性能.5.3%Ag/SBA-15中的Ag粒径为5–6 nm,且均匀分散于载体孔道中,反应温度为220°C时,苯甲醇转化率为87%,苯甲醛选择性为95%;240°C时,苯甲醇转化率和苯甲醛选择性分别高达94%和97%;并在240–300°C范围内,其催化活性和选择性保持不变,表现出了良好的温度耐受能力.催化剂经活化再生可以连续使用40 h,选择性基本保持不变.     

加速溶剂萃取-气相色谱法测定岩石中痕量正构烷烃(C21~C40)

建立了气相色谱法结合加速溶剂萃取技术测定岩石中痕量正构烷烃(C21~C40)的方法,对比了超声波萃取、加速溶剂萃取及索氏萃取3种提取方式,研究了提取溶剂及净化方式对正构烷烃测定的影响。实验结果表明:以丙酮-二氯甲烷(1∶1,V/V)为萃取剂,使用硅胶和中性氧化铝进行净化,各物质标准曲线相关系数均大于0.999,检出限为0.01~0.09μg/kg,对3个浓度的空白加标样进行回收实验和精密度实验,回收率在70.7%~91.7%之间,相对标准偏差(RSD)为1.8%~13%。方法可用于实际岩石样品中痕量正构烷烃的测定。     

HZSM-5/Hβ复合分子筛的正辛烷临氢异构化和芳构化性能

将不同孔尺寸、酸强度的HZSM 5和Hβ分子筛混合制得复合载体,担载金属组分Ni、Mg、Mo、Zn制得烷烃异构化和芳构化催化剂M/C。采用XRD、BET、程序升温氨脱附（NH3 TPD）及吡啶吸附 脱附红外光谱法对制备的载体及催化剂进行了理化性质表征。以正辛烷为正构烷烃模型化合物,在连续加氢微型反应装置上评价了催化剂对正构烷烃异构化和芳构化反应的催化性能。结果表明,与单一分子筛相比,复合后载体的表面酸中心分布得到了调节,中强酸中心的增加有利于烷烃异构化和芳构化反应。复合分子筛催化剂引入不同金属组分进行改性后体现出不同的催化性能,其中Ni的引入既提供了加脱氢活性中心,又获得了适宜的B、L酸中心分布,使反应转化率和选择性显著提高。反应条件对催化剂的异构化和芳构化性能也有不同程度的影响,在320℃、2.8MPa、2.0h－1下,正辛烷的临氢异构化和芳构化选择性较好。     

HZSM-5催化甲苯和甲醇烷基化反应机理的密度泛函理论研究（英文）

对二甲苯(PX)是重要的有机化工原料,主要用于生产对苯二甲酸(PTA)和对苯二甲酸二甲酯(DMT),PTA和DMT可经缩聚生产化纤、合成树脂和塑料等聚酯产品.PX主要通过甲苯歧化、二甲苯异构化或甲苯与C9芳烃烷基转移等方式生产.由于三种二甲苯和乙苯的沸点接近,需要经过吸附分离或深冷分离才能得到高纯度的PX,传统工艺物料循环量大,设备庞大,操作费用高.而通过甲苯和甲醇烷基化反应直接高选择性生成PX,可大大降低成本,具有非常高的经济效益和研究价值.自1970年代以来,国内外众多科研院所对甲苯和甲醇烷基化催化剂进行了广泛研究,但催化剂选择性和稳定性仍需进一步提高.为了加深对甲苯和甲醇烷基化反应的认识,指导催化剂开发,有必要对甲苯和甲醇烷基化生成二甲苯的反应机理进行深入研究.当前甲苯和甲醇烷基化机理研究主要存在以下问题:(1)计算得到的能量多为电子能,而非自由能;(2)所采用的模型多为团簇模型,使用ONIOM方法,对长程作用力描述不充分;(3)认为甲苯只有一种吸附状态;(4)没有考虑偕烷基化反应.本文采用周期性模型,通过密度泛函理论研究了HZSM-5分子筛上甲苯和甲醇烷基化反应机理,通过计算熵得到了反应自由能,并考虑了偕烷基化反应.由于甲基的存在,在甲苯的吸附态中,甲基会伸向孔道的不同方向,因此我们认为甲苯有多种吸附态,而不同的吸附态会生成不同的二甲苯.结果表明,甲苯可以在对位、间位、邻位和偕位上通过协同机理或分步机理发生烷基化反应.在协同机理中,甲苯在对位、间位、邻位和偕位发生烷基化反应的自由能垒分别为167,138,139和183 kJ/mol.在分步机理中,甲醇脱水生成甲氧基的自由能垒为145 kJ/mol,是决速步骤;而甲苯和甲氧基对位、间位、邻位和偕位烷基化的自由能垒分别为127,105,106和114 kJ/mol.两种机理中PX的生成能垒均比MX和OX高,与文献报道的结果不同.文献均认为,PX的生成能垒最低.一方面这可能是由于所采用模型的不同,本文采用周期性模型,能更充分考虑长程作用力的影响;另一方面可能是由于对甲苯吸附态的不同处理,我们认为甲苯有多种吸附态,不同的吸附态会生成不同的二甲苯,而文献均只考虑了一种甲苯吸附态.但是,在实验中,PX选择性最高.这可能是由于:(1)PX在HZSM-5孔道的扩散速率比MX和OX高2–3个数量级;(2)甲苯和甲醇烷基化生成的MX和OX迅速发生异构化反应生成PX,异构化反应速率高于甲苯烷基化速率.两种机理中,C_8H_(11)~+都是重要的中间物种,它可以反馈一个质子给分子筛骨架,生成二甲苯;也可以脱烷基生成甲烷和乙烯等气相产物.研究发现,甲烷的生成是由于C_8H_(11)~+物种中的一个H质子从苯环上的碳原子转移到甲基上的碳原子造成的,计算得到的对位、间位和邻位C_8H_(11)~+生成甲烷的能垒分别为136,132和134 k J/mol.由于十元环孔道的限制,HZSM-5孔道中很难通过甲苯歧化反应生成苯;偕烷基化生成的碳正离子有可能脱烷基生成乙烯和乙烷等产物,进而生成苯.碳正离子脱烷基反应生成了大量气相产物,造成反应液收降低.碳正离子脱烷基反应与甲醇制烯烃过程的烃池机理相一致,因此甲苯和甲醇烷基化反应也遵循烃池机理.     

Estimation of pore size distribution in MCM-41-type silica using a simple desorption technique

A recently developed dynamic desorption technique is used for obtaining vapor isotherms on porous materials. This gravimetric technique does not require any preliminary calibration and is based on analyzing the kinetics of liquid evaporation from a porous sample under quasi-steady state conditions. The crucial feature of the technique is concerned with the fact that no vapor pressure measurements are necessary. The technique is illustrated by desorption of benzene vapors from mesoporous silica MCM-41. To calculate the pore size distribution, the Derjaguin–Broekhoff–de Boer theory in its combination with the Wheeler model for capillary condensation is used. In the calculations, the reference data on benzene adsorption on a nonporous silica gel from two different sources (published by different authors) are applied. The mean mesopore sizes estimated from desorption isotherms are shown to be in a fair agreement with the calculations through the geometrical method based on the X-ray diffraction data. The dynamic desorption technique can serve as an additional tool for the characterization of a porous media.     

Cavitation and pore blocking in nanoporous glasses

In gas adsorption studies, porous glasses are frequently referred to as model materials for highly disordered mesopore systems. Numerous works suggest that an accurate interpretation of physisorption isotherms requires a complete understanding of network effects upon adsorption and desorption, respectively. The present article deals with nitrogen and argon adsorption at different temperatures (77 and 87 K) performed on a series of novel nanoporous glasses (NPG) with different mean pore widths. NPG samples contain smaller mesopores and significantly higher microporosity than porous Vycor glass or controlled pore glass. Since the mean pore width of NPG can be tuned sensitively, the evolution of adsorption characteristics with respect to a broadening pore network can be investigated starting from the narrowest nanopore width. With an increasing mean pore width, a H2-type hysteresis develops gradually which finally transforms into a H1-type. In this connection, a transition from a cavitation-induced desorption toward desorption controlled by pore blocking can be observed. Furthermore, we find concrete hints for a pore size dependence of the relative pressure of cavitation in highly disordered pore systems. By comparing nitrogen and argon adsorption, a comprehensive insight into adsorption mechanisms in novel disordered materials is provided.     

A grand canonical Monte Carlo study of capillary condensation in mesoporous media: effect of the pore morphology and topology

We study by means of Grand Canonical Monte Carlo simulations the condensation and evaporation of argon at 77 K in nanoporous silica media of different morphology or topology. For each porous material, our results are compared with data obtained for regular cylindrical pores. We show that both the filling and emptying mechanisms are significantly affected by the presence of a constriction. The simulation data for a constricted pore closed at one end reproduces the asymmetrical shape of the hysteresis loop that is observed for many real disordered porous materials. The adsorption process is a quasicontinuous mechanism that corresponds to the filling of the different parts of the porous material, cavity, and constriction. In contrast, the desorption branch for this pore closed at one end is brutal because the evaporation of Ar atoms confined in the largest cavity is triggered by the evaporation of the fluid confined in the constriction (which isolates the cavity from the gas reservoir). This evaporation process conforms to the classical picture of "pore blocking effect" proposed by Everett many years ago. We also simulate Ar adsorption in a disordered porous medium, which mimics a Vycor mesoporous silica glass. The adsorption isotherm for this disordered porous material having both topological and morphological defects presents the same features as that for the constricted pore (quasicontinuous adsorption and steep desorption process). However, the larger degree of disorder of the Vycor surface enhances these main characteristics. Finally, we show that the effect of the disorder, topological and/or morphological, leads to a significant lowering of the capillary condensation pressure compared to that for regular cylindrical nanopores. Also, our results suggest that confined fluids isolated from the bulk reservoir evaporate at a pressure driven by the smallest size of the pore.     

甲醇气氛静态呼吸图法制备蜂窝状有序多孔膜

以原子转移自由基聚合方法合成的聚二甲基硅氧烷-b-聚苯乙烯(PDMS-b-PS)为铸膜材料,在静态呼吸图的基础上,首次在甲醇氛围下利用PDMS-b-PS的二硫化碳溶液铸膜得到了高度规整的蜂窝状有序多孔结构.研究了聚合物溶液浓度对孔径的影响,并与水蒸汽氛围制备的孔结构进行了比较.结果表明,甲醇气氛下制备的多孔膜的孔径比水蒸汽氛围下的大,且孔的断面形貌呈“U”形;孔径随着溶液浓度的增大而减小.该研究有利于呼吸图法制备有序结构材料技术的进一步发展,有助于人们更加准确与全面地认识呼吸图机理.     

交联聚苯乙烯型多孔吸附剂的中孔性质研究

采用77K温度下的氮气吸附方法,测定了经悬浮聚合制备的不同交联度的交联聚苯乙烯多孔吸附剂的吸附/脱附等温线.根据BET吸附模型计算了比表面,由吸附量计算了总的孔体积,由孔体积和比表面计算出平均孔径,并依据脱附等温线采用BJH方法计算孔径分布.结果表明,交联度对交联聚苯乙烯多孔吸附剂的孔结构均具有显著影响.随着交联聚苯乙烯多孔吸附剂的交联度升高,其孔径变小,比表面增大,而且低交联度吸附剂的中孔接近圆柱形,高交联吸附剂的中孔形状接近“墨水瓶”形.显然,交联度对孔性质的影响与孔结构在交联聚苯乙烯多孔吸附剂制备和后处理过程中的稳定性密切相关.交联度低时,初期形成的小孔不能保持稳定,在后续聚合及后处理过程中合并为大孔,结果造成低交联吸附剂大孔径、低比表面的现象.通过对孔径分布的研究,揭示了不同吸附剂在中孔范围内的孔特征,并对其形成机制进行了分析.     

Carbon Aerogels Supported Pt Nanoparticles as Electrocatalysts for Methanol Oxidation in Alkaline Media

Carbon aerogels (CAs) were prepared by sol‐gel polycondensation of resorcinol and formaldehyde with BET surface area of 616 m² g^?1 and the average pore size of 9.8 nm. The prepared CAs were used as supports for Pt nanoparticles for methanol oxidation in alkaline media. In comparison with Pt supported on commercial Vulcan XC‐72R carbon (Pt/C) electrocatalysts, Pt supported on CAs (Pt/CAs) electrocatalysts exhibited higher peak current density and more negative onset potential toward methanol oxidation. The effects of different parameters such as NaOH concentration, methanol concentration, and scan rate on the methanol oxidation reaction were investigated in detail. The results showed that the Pt/CAs electrocatalysts had promising application for methanol oxidation in alkaline media.     

The investigation of the pore structure of silica gels with long-chain alkyl grafts by thermal analysis

The total pore volumes and the core size distributions were calculated for the silica gel Si-100 and chemically modified silica gels RP-8 and RP-18 on the basis of the thermal desorption data of various liquids. The results obtained are compared with those from the nitrogen adsorption/desorption method. Good consistency between the parameters obtained by using different methods is observed in the case of unmodified silica gel. The presence of long alkyl chains on the silica surface strongly influences the pore diameter calculated from thermogravimetric data.     

Borromean-entanglement-driven assembly of porous molecular architectures with anion-modified pore space

A series of metal-organic frameworks based on a flexible, highly charged Bpybc ligand, namely 1?Mn?OH(-), 2?Mn?SO(4)(2-), 3?Mn?bdc(2-), 4?Eu?SO(4)(2-) (H(2)BpybcCl(2) = 1,1'-bis(4-carboxybenzyl)-4,4'-bipyridinium dichloride, H(2)bdc = 1,4-benzenedicarboxylic acid) have been obtained by a self-assembly process. Single-crystal X-ray-diffraction analysis revealed that all of these compounds contained the same n-fold 2D→3D Borromean-entangled topology with irregular butterfly-like pore channels that were parallel to the Borromean sheets. These structures were highly tolerant towards various metal ions (from divalent transition metals to trivalent lanthanide ions) and anion species (from small inorganic anions to bulky organic anions), which demonstrated the superstability of these Borromean linkages. This non-interpenetrated entanglement represents a new way of increasing the stability of the porous frameworks. The introduction of bipyridinium molecules into the porous frameworks led to the formation of cationic surface, which showed high affinities to methanol and water vapor. The distinct adsorption and desorption isotherms of methanol vapor in four complexes revealed that the accommodated anion species (of different size, shape, and location) provided a unique platform to tune the environment of the pore space. Measurements of the adsorption of various organic vapors onto framework 1?Mn?OH(-) further revealed that these pores have a high adsorption selectivity towards molecules with different sizes, polarities, or π-conjugated structures.     

Precise control of agarose media pore structure by regulating cooling rate

A porous structure is the key factor to successful chromatography separation. Agarose gel as one of the most popular porous media has been extensively used in chromatography separation. As the cooling process in the agarose gelation procedure can directly influence the pore structure, ten kinds of 4% agarose media with different cooling rates from 0.132 to 16.7°C/min were synthesized, and the pore structure was determined accurately by using low‐field NMR spectroscopy. The curves of pore structure and cooling rate can be divided into two stages with the boundary of 6°C/min. In stage I, the pore structure met a power equation with the decrease of the cooling rate, and in stage II, the process reached a plateau. Confirmatory experiments proved that, by adjusting the cooling rate, a precise control of the pore structure of agarose media can be realized, furthermore, cooling rate optimization was an effective way to control the pore size of agarose media and can further tailor the pore structure for more effective separation of different proteins.