Dielectric Barrier Discharge for Ammonia Production

The leading after-treatment technology for NOx removal process in Diesel engines for stationary and mobile applications is the selective catalytic reduction of oxides of nitrogen [NOx] by ammonia [NH₃]. A novel non-thermal plasma electrode with a needle array in a dielectric barrier discharge reactor, powered by a high frequency neon transformer, is used for the thermal decomposition of solid urea [(NH₂)CO(NH₂)] to produce ammonia. The thermolysis of urea produces iso-cyanic acid [HNCO] as a byproduct, besides ammonia, which can react with water in the gas phase, thus giving carbon dioxide and more ammonia. The presence of water fed before and/or after the plasma reactor was studied to assess its effect on the amount of produced ammonia. Results clearly showed that water fed to the entrance of the reactor can efficiently promote the reaction of iso-cyanic acid to produce ammonia and this result can be improved when air is used as carrier gas for 115 V of input voltage to a neon transformer and with a gas flow rate of 4 L/min.     

Multi-Hollow Surface Dielectric Barrier Discharge for Bacterial Biofilm Decontamination

The plasma-activated gas is capable of decontaminating surfaces of different materials in remote distances. The effect of plasma-activated water vapor on Staphylococcus epidermidis, methicillin-resistant Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli biofilm contamination was investigated on the polypropylene nonwoven textile surface. The robust and technically simple multi-hollow surface dielectric barrier discharge was used as a low-temperature atmospheric plasma source to activate the water-based medium. The germicidal efficiency of short and long-time exposure to plasma-activated water vapor was evaluated by standard microbiological cultivation and fluorescence analysis using a fluorescence multiwell plate reader. The test was repeated in different distances of the contaminated polypropylene nonwoven sample from the surface of the plasma source. The detection of reactive species in plasma-activated gas flow and condensed activated vapor, and thermal and electrical properties of the used plasma source, were measured. The bacterial biofilm decontamination efficiency increased with the exposure time and the plasma source power input. The log reduction of viable biofilm units decreased with the increasing distance from the dielectric surface.     

Flue Gas Desulfurization by Dielectric Barrier Discharge

There are many problems with flue gas desulfurization by traditional gas ionization discharge, including the large size of the plasma source, high energy consumption, and the need for a traditional desulfurization method. This paper introduces oxidization of SO₂ to sulfuric acid (H₂SO₄) in a duct by reactive oxygen species (O₂ ⁺, O₃) produced by strong ionization dielectric barrier discharge. The entire plasma reaction process is completed within the duct without the use of absorbents, catalysts, or large plasma source. The reactive oxygen species O₂ ⁺ reacts with gaseous H₂O in the flue gas to generate ·OH radicals, which can oxidize trace amounts of SO₂ in large volumes of the flue gas to produce H₂SO₄. Sulfuric acid is also produced by O₃ oxidation of SO₂ to SO₃, and SO₃ reacting with gaseous H₂O in the flue gas. Experimental results showed that with a gas temperature of 22 °C and reactive oxygen species injection rate of 0.84 mg/L, the SO₂ removal rate was 81.4 %, and the SO₄ ^2? concentration in the recovered liquid H₂SO₄ reached 53.8 g/L.     

Uneven Dielectric Barrier Discharge Reactors for Diesel Particulate Matter Removal

Uneven dielectric barrier discharge (DBD) reactors driven by positive–negative pulse plasma discharges were investigated for particulate matter (PM) removal from a diesel engine. Two kinds of uneven alumina plates and three kinds of uneven stainless steel plates were used to assemble six kinds of uneven DBD reactors of discharge gaps 0.4–1.0 mm. The experimental results show that PM from diesel engines can be removed using the uneven DBD reactors. The maximum PM removal was 67% at 300 W energy injections using the DBD reactor of 0.4 mm gap distance. PM removal increased with decreasing gap distance. The energy efficiency using the uneven DBD reactor of a shorter gap distance was higher than that using the uneven DBD reactor of a longer gap distance as the uneven DBD reactor of a shorter gap distance has a higher PM deposition rate. The energy efficiency was typically in a range of 3–10.6 g/kWh at an energy density of 2–16 J/L. A comparison of this study with reports given by other research groups is given.     

Dilute Methane Treatment by Atmospheric Pressure Dielectric Barrier Discharge: Effects of Water Vapor

Oxidation of dilute methane in oxygen containing mixtures by atmospheric pressure dielectric barrier discharge at moderate temperature (below 150°C) has been studied with regard to the effect of water vapor. First, the impact of water vapor on methane conversion was studied in nitrogen. In dry nitrogen, methane was converted into hydrogen cyanide and hydrogen in the absence of oxidant. When water was added, it both acted as a scavenger in competition with methane for reactive nitrogen species and changed the reaction product speciation from HCN to carbon monoxide and carbon dioxide. The addition of water also led to the formation of hydrogen and nitrogen oxides. In the presence of oxygen, the addition of 1% water vapor enhanced methane conversion. Increasing water vapor content above 1% had a slight positive effect on methane conversion, and was found to enhance selectivity of the reaction products toward carbon dioxide over carbon monoxide.     

Novel Catalytic Dielectric Barrier Discharge Reactor for Gas-Phase Abatement of Isopropanol

Catalytic gas-phase abatement of air containing 250 ppm of isopropanol (IPA) was carried out with a novel dielectric barrier discharge (DBD) reactor with the inner catalytic electrode made of sintered metal fibers (SMF). The optimization of the reactor performance was carried out by varying the voltage from 12.5 to 22.5 kV and the frequency in the range 200–275 Hz. The performance was significantly improved by modifying SMF with Mn and Co oxide. Under the experimental conditions used, the MnO _x /SMF showed a higher activity towards total oxidation of IPA as compared to CoO _x /SMF and SMF electrodes. The complete destruction of 250 ppm of IPA was attained with a specific input energy of ∼235 J/L using the MnO _x /SMF catalytic electrode, whereas, the total oxidation was achieved at 760 J/L. The better performance of the MnO _x /SMF compared to other catalytic electrodes suggests the formation of short-lived active species on its surface by the in-situ decomposition of ozone.     

Theoretical Kinetics Investigation of Krypton Dielectric Barrier Discharge for UV Lamp

Plasma Chemistry and Plasma Processing - This work presents an electric and kinetic study of homogeneous dielectric barrier discharge (DBD) in pure krypton (Kr). The electrical characterization and...     

Characteristics of Dielectric Barrier Discharge Ozone Synthesis for Different Pulse Modes

This paper features the pulse polarity effect on ozone generation efficiency by adjusting the applied voltage and the flow rate in a coaxial dielectric barrier discharge reactor. Results show that utilization of unipolar pulse has better performance when compared with the bipolar mode, but on the other hand, utilization of the positive pulse has slightly higher efficiency than that of negative mode. Meanwhile, changing the gas flow rate shows a minor effect on ozone generation. Utilization of bipolar pulse would decrease the breakdown voltage and ozone generation efficiency when compared with unipolar pulse while it would lead to higher ozone concentrations at fixed applied voltage. The maximum ozone yield reaches 186.9 g/kWh at 6 kV positive pulse with ozone concentration of 11.9 g/Nm³.     

单电极介质阻挡放电离子源研究

介质阻挡放电离子源是一种常压敞开式离子源,由于免试剂、适用范围广、易于小型化等特点而备受关注.该类离子源多采用表面双电极或针-环电极设计方式.表面双电极的接地电极会减弱氦气在强电场中电离形成的流注崩头能量,缩短等离子束喷射距离.针-环电极的电场主要集中在针电极尖端,流注崩头能量小,等离子束喷射距离比表面双电极还短.本研究对放电影响因素进行分析,通过改变电极形状和增加绝缘介质部件进行电场调整,使强电场区域集中于电极一侧,解决了单电极回流放电问题,从而获得稳定、高效的等离子束,其最大长度可达8 cm以上.基于电场调整技术,研制出单电极介质阻挡放电离子源,它主要由惰性载气、高压电极、绝缘介质管、气控以及温控部分组成.使用新型离子源对咖啡因液态样品和扑热息痛固体药片进行了质谱分析,前者的定量曲线R2值为99.66％,100 μg/L的信噪比为23;后者的主要成分对乙酰氨基酚可在质谱中快速检出,响应强度为1.26×106.上述结果表明,新型离子源可以实现样品的定量和快速原位分析.     

CARS Diagnostic and Modeling of a Dielectric Barrier Discharge

Dielectric barrier discharges (DBD) with planar- and knife-shaped electrodes are operated in N₂O₂NO mixtures under a pressure of 20 and 98 kPa. They are excited by means of consecutive unipolar or bipolar high-voltage pulse packages of 10 kV at a pulse repetition rate of 1 and 2 kHz. The rotational and vibrational excitation of N ₂ molecules and the reduction of nitric oxide (NO) in the discharge have been investigated using coherent anti-Stokes Raman scattering (CARS) technique. Rotational (gas) temperatures near the room temperature and vibrational temperatures of about 800 K at atmospheric pressure and 1400 K at a pressure of 20 kPa are observed. Therefore, chemical reactions of NO with vibrationally excited N ₂ are probably insignificant. One-dimensional kinetic models are developed that balance 35 chemical reactions between 10 species and deliver equations for the population density of excited vibrational levels of N ₂ together with a solution of the Boltzmann equation for the electrons. A good agreement between measured vibrational temperatures of N ₂ , the concentration of NO, and calculated data is achieved. Modeling of the plasma discharge verifies that a DBD operated with a N₂NO mixture reduces the NO content, the simultaneous presence of O ₂ , already 1%, is enough to prevent the NO reduction.     

Efficiency of Ozone Production in Coplanar Dielectric Barrier Discharge

Plasma Chemistry and Plasma Processing - Efficient generation of ozone by cold atmospheric plasmas is interesting for sterilisation and decontamination of thermally-sensitive surfaces. This paper...     

The Destruction of Carbon Tetrachloride Dissolved in Water in a Dielectric Barrier Discharge in Oxygen

The kinetics of decomposition of tetrachloromethane (TCM) in its aqueous solutions and the kinetics of decomposition products formation was investigated under the action of DBD at atmospheric pressure in oxygen in a falling-flow reactor. The range of initial concentrations of TCM was 25–325 μmol/l, the discharge power—2–11 W and O₂ flow rates—1–3 cm³/s. It is shown that the kinetics of the TCM decomposition can be described by the equation of pseudo-first kinetic order. The rate constant depended weakly on the discharge parameters and was?~?5 s^?1. The energy efficiency of the decomposition, depending on the parameters, was 0.1–1.3 molecules per 100 eV. When the residence time of the solution with the discharge zone is more than 1 s, it is possible to achieve almost 100% degree of TCM decomposition. It is shown that the main products of the TCM decomposition in the liquid phase are aldehydes and Cl^? ions, and in the gas phase—the molecules CO and CO₂. The results for energy efficiency are compared with the results obtained in other AOP’s processes (Fenton process, photocatalytic process, the radiation process by the action of high-energy electron flux). It is shown that the action of the DBD is more effective than the action of the above processes.

     

Chlorinated Organic Compounds Decomposition in a Dielectric Barrier Discharge

The decomposition of chlorinated volatile organic compounds by non-thermal plasma generated in a dielectric barrier discharge was investigated. As model compounds trichloroethylene (TCE) and 1,2-dichloroethane (DCE) were chosen. It was found that TCE removal exceeds 95% for input energy densities above 0.2 eV/molecule, regardless of the initial concentration of TCE, in the range 100–750 ppm. On the other hand, DCE was more difficult to decompose, the removal rate reached a maximum of 60% at the highest input energy used. For both investigated compounds the selectivity towards carbon dioxide was significantly influenced by their initial concentration, increasing when low concentrations were used. The gas flow rate had also an effect on CO₂ selectivity, which is higher at low flow rate, due to the higher residence time of the gas in the plasma. The best values obtained in these experiments were around 80%.     

Plasma Jet and Dielectric Barrier Discharge Treatment of Wheat Seeds

Plasma Chemistry and Plasma Processing - Low-temperature plasma treatment of wheat seeds was performed by a plasma jet and dielectric barrier discharge, both at atmospheric pressure. The influence...     

Deposition of Gold Nanoparticles on Polypropylene Nonwoven Pretreated by Dielectric Barrier Discharge and Diffuse Coplanar Surface Barrier Discharge

The aim of this study was to examine and compare the potentials of two different ambient air plasma treatments: volume dielectric barrier discharge and diffuse coplanar surface barrier discharge, for the activation of polypropylene (PP) nonwovens surface. This was done in order to enhance the deposition of gold nanoparticles (AuNPs) onto PP surface. AuNPs were attached onto PP surface from colloidal solution prepared without stabilizers. Scanning electron microscopy, atomic force microscopy, attenuated total reflection-Fourier transform infrared spectroscopy, water absorption, and AuNPs uptake were used to assess the surface changes due to the plasma treatment, and to evaluate the durability of the achieved treatment effects. Finally, as a very important aspiration of the research, antibacterial activity of AuNPs loaded PP nonwovens against pathogens Staphylococcus aureus and Escherichia coli was evaluated in vitro. The plasma modified PP nonwovens have highly improved wetting and sorption properties. The PP nonwovens loaded with 17–62 mg/kg AuNPs exhibit antibacterial activity against tested pathogens. Surprisingly, this activity was enhanced by the first sample rinsing.     

高频介质阻挡放电烟气脱硫研究

采用高频介质阻挡放电的方式产生低温等离子体,研究在不加入NH₃的情况下流动态SO₂的去除情况.实验表明,在输入电压为12 kV,SO₂浓度为5400 mg/m³,气体流量为0.36 m³/h,相对湿度为55%时,脱硫率可达到70%以上;水气的存在对SO₂的去除有较大的促进作用,升高电压和增加O₂量对脱硫率的促进作用有限.对实验结果进行了解释,并提出了反应机理.     

Plasma-Catalytic Decomposition of Phenols in Atmospheric Pressure Dielectric Barrier Discharge

This study investigated the processes for the destruction of phenol and its derivatives (resorcin and pyrocatechol) in aqueous solutions under the action of an oxygen dielectric barrier discharge (DBD) at atmospheric pressure in the presence or absence of catalysts in the plasma zone. It was shown that the DBD had a high decomposition efficiency for phenol and its derivatives (up to 99%). Phenol was the most stable and pyrocatechol was the least. In a plasma-catalytic hybrid process, the effective rate constants for phenol, resorcin and pyrocatechol decomposition were 11, 4 and 2.5 times higher, respectively, than those for the DBD treatment without catalysts. The process also resulted in a 1.4, 1.6 and 1.2 times higher rate of carboxylic acid formation for phenol, resorcin and pyrocatechol, respectively. The fractional conversion into the respective carboxylic acids reached 56% for phenol and 68% for resorcin and pyrocatechol.     

Gas-Phase Removal of Acetaldehyde via Packed-Bed Dielectric Barrier Discharge Reactor

The effectiveness of applying packed-bed dielectric barrier discharge(PBDBD) technology for removing acetaldehyde from gas streams wasinvestigated. Operating parameters examined in this study include appliedvoltage, oxygen content, and gas-flow rate. Experimental results indicatethat the destruction efficiency of acetaldehyde predominantly depends onthe applied voltage. Removal of 99% of acetaldehyde has been achieved forgas streams containing 1000 ppmv acetaldehyde, 5% oxygen, with nitrogen asthe carrier gas. The oxygen content in the gas stream plays an importantrole in removing acetaldehyde within PBDBD. A higher CH3CHO removalefficiency is achieved for the gas stream containing less oxygen, since itwill dissipate energy due to its electronegative property. Carbon dioxideis the major end product, which is less hazardous to the environment and tohuman health. However, undesirable products, e.g., NO₂ and N₂O,CH₃OC₂H₅, CH₃COOH, CH₃NO₂,HCN, CH₃NO₃, and CH₃OH, are detected as well.     

Influence of Duty Cycle on Ozone Generation and Discharge Using Volume Dielectric Barrier Discharge

The influence of duty cycle on ozone generation and discharge characteristics was investigated experimentally using volume dielectric barrier discharge in both synthetic air and pure oxygen at atmospheric pressure. The discharge was driven by an amplitude-modulated AC high voltage–power supply producing T_ON (a single AC cycle) and T_OFF periods with a widely variable duty cycle. The experimental results show that the energy delivered to the discharge during each AC cycle remains roughly constant and is independent of feed gas, duty cycle and T_OFF. Both average discharge power and ozone concentration show an initial linear increase with duty cycle, and deviate gradually from linearity owing to an increase in gas temperature at higher duty cycles. Nevertheless, ozone yield remains nearly constant (45.7 ± 3.5 g/kWh in synthetic air and 94.7 ± 3.1 g/kWh in pure oxygen) over a wide range of applied duty cycles (0.02–1). This property can be conveniently employed to develop a unique ozone generator with a widely adjustable ozone concentration and simultaneously a constant ozone yield. Additionally, the discharges in synthetic air and pure oxygen have similar electrical characteristics; however, there are observable differences in apparent luminosity, which is weak and white-toned for synthetic air discharge, and bright and blue-toned for pure oxygen discharge.