Comparison of binding behavior for molecularly imprinted polymers prepared by hierarchical imprinting or Pickering emulsion polymerization

The aim of this study was the evaluation of the binding performances and selectivity of molecularly imprinted beads prepared toward several penicillins (i) by hierarchical bulk polymerization in the pores of template‐grafted silica microbeads (hMIPs) and (ii) by Pickering emulsion polymerization in the presence of template‐decorated silica nanobeads (pMIPs). 6‐Aminopenicillanic acid was chosen as the common fragmental mimic template. Both approaches produced micron‐sized polymeric beads with good recognition properties toward the target ligands whereas the selectivity pattern appeared quite different. The polymer prepared by the Pickering emulsion approach showed binding properties similar to imprinted beads prepared by hierarchical approach. Equilibrium binding constants changed their values from 0.1–0.2 × 10⁶ (hMIPs) to 0.2–0.6 × 10⁶ M^?1 (pMIPs), while the binding site densities changed from 3.7–4.8 (hMIPs) to 0.3–0.55 μmol/g (pMIPs). Compared to the hierarchical polymerization, Pickering emulsion polymerization represents a more practical approach when a template mimic needs to be used.     

Synthesis and binding site characteristics of 2,4,6-trichlorophenol-imprinted polymers

2,4,6-Trichlorophenol (2,4,6-TCP)-imprinted micro- and submicrospheres prepared by precipitation polymerization were compared with templated materials obtained by conventional bulk polymerization. The influence of the type and amount of functional monomer, the type and amount of cross-linker, polymerization temperature, porogen, and the ratio of template molecule and functional monomer to cross-linker on the size of the obtained particles were investigated. UV-Vis spectrophotometer experiments revealed that the microsphere polymers provided higher affinity to the template in contrast to imprinted polymers prepared by bulk polymerization. The binding properties of the microspheres, including binding isotherms and affinity distribution, were studied via Freundlich isotherm affinity distribution (FIAD) analysis. The obtained results indicated that microspheres prepared by precipitation polymerization provided superior rebinding properties during equilibrium binding in contrast to bulk polymers and submicrosphere polymers. Moreover, release experiments showed that 80% of rebound 2,4,6-TCP was released from the imprinted microspheres within the first 2 h, while more intimately bound 2,4,6-TCP molecules were released in the following 40 h. The morphologies and porosities of the resulting imprinted materials were characterized by scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) analysis, respectively. The microsphere polymers exhibited a regular spherical shape with a high degree of monodispersity to the corresponding bulk polymers. Furthermore, the micro- and submicrospheres were characterized by narrow distribution of pores in contrast to a heterogeneity index of m = 0.6647 for the microsphere imprinted polymer.     

Organic–inorganic hybrid silica as supporting matrices for selective recognition of bovine hemoglobin via covalent immobilization

The synthesis of poly‐aminophenylboronic acid (APBA) imprinted hybrid silica‐based polymers for selective recognition of bovine hemoglobin (BHb) was described, where the mesoporous hybrid silica supporting matrices were prepared by a mild sol–gel process with tetraethoxysilane and 3‐aminopropyltriethoxysilane as two precursors. Covalent immobilization of BHb was adopted in order to create homogeneous recognition sites. After removal of the template, the resulting imprinted polymers showed high binding affinity toward BHb and the imprinting factor (α) reached 2.12. The specificity of the BHb recognition was evaluated with competitive experiments, indicating the imprinted polymers have a higher selectivity for the template BHb. The easy preparation protocol and good protein recognition properties made the approach an attractive solution to depletion of high‐abundance protein from bovine blood.     

Preparation of ellagic acid molecularly imprinted polymeric microspheres based on distillation–precipitation polymerization for the efficient purification of a crude extract

Molecularly imprinted polymeric microspheres with a high recognition ability toward the template molecule, ellagic acid, were synthesized based on distillation–precipitation polymerization. The as‐obtained polymers were characterized by scanning electron microscopy, infrared spectroscopy, and thermogravimetric analysis. Static, dynamic, and selective binding tests were adopted to study the binding properties and the molecular recognition ability of the prepared polymers for ellagic acid. The results indicated that the maximum static adsorption capacity of the prepared polymers toward ellagic acid was 37.07 mg/g and the adsorption equilibrium time was about 100 min when the concentration of ellagic acid was 40 mg/mL. Molecularly imprinted polymeric microspheres were also highly selective toward ellagic acid compared with its analogue quercetin. It was found that the content of ellagic acid in the pomegranate peel extract was enhanced from 23 to 86% after such molecularly imprinted solid‐phase extraction process. This work provides an efficient way for effective separation and enrichment of ellagic acid from complex matrix, which is especially valuable in industrial production.     

Efficient synthesis of molecularly imprinted polymers with bio‐recognition sites for the selective separation of bovine hemoglobin

We developed a facile approach to the construction of bio‐recognition sites in silica nanoparticles for efficient separation of bovine hemoglobin based on amino‐functionalized silica nanoparticles grafting by 3‐aminopropyltriethoxylsilane providing hydrogen bonds with bovine hemoglobin through surface molecularly imprinting technology. The resulting amino‐functionalized silica surface molecularly imprinted polymers were characterized using scanning electron microscope, transmission electronic microscopy, Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and thermogravimetric analysis. Results showed that the as‐synthesized imprinted polymers exhibited spherical morphology and favorable thermal stability. The binding adsorption experiments showed that the imprinted polymers can reach equilibrium within 1 h. The Langmuir isotherm and pseudo‐second‐order kinetic model fitted the adsorption data well. Meanwhile, the imprinted polymers possessed a maximum binding capacity up to 90.3 mg/g and highly selectivity for the recognition of bovine hemoglobin. Moreover, such high binding capacity and selectivity retained after eight cycles, indicating the good stability and reusability of the imprinted polymers. Finally, successful application in the selective recognition of bovine hemoglobin from a real bovine blood sample indicated that the imprinted polymers displayed great potentials in efficient purification and separation of target proteins.     

Preparation and application of hollow molecularly imprinted polymers with a super‐high selectivity to the template protein

Protein‐imprinted polymers with hollow cores that have a super‐high imprinting factor were prepared by etching the core of the surface‐imprinted polymers that used silica particles as the support. Lysozyme as template was modified onto the surface of silica particles by a covalent method, and after polymerization and the removal of template molecules, channels through the polymer layer were formed, which allowed a single‐protein molecule to come into the hollow core and attach to the binding sites inside the polymer layer. The adsorption experiments demonstrated that the hollow imprinted polymers had an extremely high binding capacity and selectivity, and thus a super‐high imprinting factor was obtained. The as‐prepared imprinted polymers were used to separate the template lysozyme from egg white successfully, indicating its high selectivity and potential application in the field of separation of protein from real samples.     

合成引发方式对槲皮素-钴(Ⅱ)配位印迹聚合物结构与性能的影响

以槲皮素-钴(Ⅱ)的配合物为模板分子,在强极性甲醇溶剂中分别采用低温光引发和高温热引发聚合制备槲皮素-钴(Ⅱ)配位印迹聚合物.紫外-可见光谱分析确定了槲皮素与钴(Ⅱ)形成配合物的最佳配位比.根据印迹聚合物的平衡结合量优化功能单体丙烯酰胺用量.利用红外光谱、透射电镜和平衡结合实验,考察不同引发方式对聚合物的结构、微观形貌及结合性能的影响.进一步通过特异吸附容量和印迹指数确定,低温光引发聚合更适于配位分子印迹聚合物的制备.同时研究了不同阳、阴离子对印迹聚合物选择识别性的影响.结果表明光引发的金属配位分子印迹聚合物具有良好的吸附选择性,印迹指数可达3.919.     

Preparation and characterization of erythromycin molecularly imprinted polymers based on distillation–precipitation polymerization

Erythromycin‐imprinted polymers with excellent recognition properties were prepared by an innovative strategy called distillation–precipitation polymerization. The interaction between erythromycin and methacrylic acid was studied by ultraviolet absorption spectroscopy, and the as‐prepared materials were characterized by Fourier‐transform infrared spectroscopy and scanning electron microscopy. Moreover, their binding performances were evaluated in detail by static, kinetic and selective sorption tests. It was found that the molecularly imprinted polymers afforded good morphology, monodispersity, and high adsorption capacity when the fraction of the monomers was 7 vol% in the whole reaction system, and the adsorption data for imprinted polymers correlated well with the Langmuir model. The maximum capacity of the imprinted and the non‐imprinted polymers for adsorbing erythromycin is 44.03 and 19.95 mg/g, respectively. The kinetic studies revealed that the adsorption process fitted a pseudo‐second‐order kinetic model. Furthermore, the imprinted polymers display higher affinity toward erythromycin, compared with its analogue roxithromycin.     

Analytical followup of the gamma initiated synthesis of a molecularly imprinted polymer

A molecularly imprinted polymer (MIP) for the template phenytoin has been prepared by gamma initiated copolymerization of methacrylamide and ethylene glycol dimethacrylate. The progress of polymerization was studied by measuring the monomer conversions and the template binding properties of the resulting polymers, respectively. The consumption rate of the two monomers showed different course. There was no difference observed in the polymerization rates of the MIP and the control polymer (NIP). The template binding properties of the MIP and the NIP changed considerably with the progress of the polymerization process and became similar to those of the thermally initiated polymers after full conversion.     

Inverse Suspension Polymerization as a New Tool for the Synthesis of Ion‐Imprinted Polymers

Ion‐imprinted polymer beads are prepared for the first time by inverse suspension polymerization in mineral oil using nickel(II) as the template ion. As water is not used as the continuous phase, this new route of synthesis avoids the risk that the ion template leaves the suspension for the aqueous phase. The leaching of nickel from the resin beads is very good due to the large porosity of the polymer beads. The ratio between the ligand and the crosslinker has been increased leading to higher adsorption capacities. Comparing these values with those of the non‐imprinted polymers and studying the effect of some interfering ions proves that an optimum can be found for the ratio ligand/crosslinker.     

Synthesis and Evaluation of Molecularly Imprinted Polymers as Sorbents for Selective Extraction of Coumarins

Coumarin, 7-hydroxycoumarin and dicoumarol molecularly imprinted polymers (MIP) were synthesized by bulk polymerization. Methacrylic acid and 4-vinylpyridine were tested as functional monomers and methanol, ethanol, acetonitrile, toluene and chloroform were tested as porogens. The binding capabilities of the imprinted polymers were assessed by equilibrium binding analysis. Highest binding capacity was obtained for MIP prepared for the template 7-hydroxycoumarin synthesized in methacrylic acid as functional monomer, chloroform as porogen and methanol/water as analyte solvent. Scanning electron microscopy analysis documented its appropriate morphology. ATR-FTIR spectra confirmed successful polymerization of MIP. Coumarin structural analogues were employed to evaluate the polymer selectivity and it was found that polymer prepared for 7-hydroxycoumarin was selective for its template molecule. Kinetic studies showed relatively fast adsorption of analytes to MIPs (1 h). Rebinding properties of MIPs were evaluated by adsorption isotherms. The calculated data fitted well with experimental data showing that Freundlich isotherm is suitable for modelling the adsorption of tested coumarins on prepared MIPs. Applicability of polymer prepared for 7-hydroxycoumarin was tested for the selective extraction of coumarins from the sample of chicory.     

Interfacial Molecular Imprinting in Nanoparticle-Stabilized Emulsions

A new interfacial nano and molecular imprinting approach is developed to prepare spherical molecularly imprinted polymers with well-controlled hierarchical structures. This method is based on Pickering emulsion polymerization using template-modified colloidal particles. The interfacial imprinting is carried out in particle-stabilized oil-in-water emulsions, where the molecular template is presented on the surface of silica nanoparticles during the polymerization of the monomer phase. After polymerization, the template-modified silica nanoparticles are removed from the new spherical particles to leave tiny indentations decorated with molecularly imprinted sites. The imprinted microspheres prepared using the new interfacial nano and molecular imprinting have very interesting features: a well-controlled hierarchical structure composed of large pores decorated with easily accessible molecular binding sites, group selectivity toward a series of chemicals having a common structural moiety (epitopes), and a hydrophilic surface that enables the MIPs to be used under aqueous conditions.     

Solid phase extraction of penicillins from milk by using sacrificial silica beads as a support for a molecular imprint

We have prepared molecularly imprinted beads with molecular recognition capability for target molecules containing the penicillanic acid substructure. They were prepared by (a) grafting mesoporous silica beads with 6-aminopenicillanic acid as the mimic template, (b) filling the pores with a polymerized mixture of methacrylic acid and trimethylolpropane trimethacrylate, and (c) removing the silica support with ammonium fluoride. The resulting imprinted beads showed good molecular recognition capability for various penicillanic species, while antibiotics such as cephalosporins or chloramphenicol were poorly recognized. The imprinted beads were used to extract penicillin V, nafcillin, oxacillin, cloxacillin and dicloxacillin from skimmed and deproteinized milk in the concentration range of 5–100 μg·L^?1. The extracts were then analyzed by micellar electrokinetic chromatography by applying reverse polarity staking as an in-capillary preconcentration step, and this resulted in a fast and affordable method within the MRL levels, characterized by minimal pretreatment steps and recoveries of 64–90 %.

Preparation and characterization of monodisperse molecularly imprinted polymers for the recognition and enrichment of oleanolic acid

Monodisperse molecularly imprinted polymers for oleanolic acid were successfully prepared by a precipitation polymerization method using oleanolic acid as a template, methacrylic acid as a functional monomer, and divinylbenzene/ethylene glycol dimethacrylate as a crosslinker in a mixture of acetonitrile and ethanol (3:1, v/v). The imprinted polymers and nonimprinted polymers were characterized by using scanning electron microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The resulting imprinted polymers had average diameters of 3.15 μm and monodispersity values of 1.024. The results clearly demonstrate that use of ethanol as a cosolvent is indeed exceedingly effective in promoting the dissolution of oleanolic acid and in obtaining uniform microspheres. Molecular recognition properties and binding capability to oleanolic acid were evaluated by adsorption testing, which indicated that the imprinted polymers displayed optimal binding performance with a maximum adsorption capacity of 17.3 mg/g and a binding saturation time of 80 min. Meanwhile, the produced imprinted polymers exhibited higher selectivity to oleanolic acid than that for ursolic acid and rhein. Herein, the studies can provide theoretical and experimental references for the oleanolic acid molecular imprinted system.     

Molecularly imprinted beads by surface imprinting

Molecular imprinting is a state-of-the-art technique for imparting molecular recognition properties to a synthetic polymeric matrix. Conventionally, the technique is easily carried out using bulk imprinting, where molecularly imprinted polymers (MIPs) are prepared in large chunks and post-treatment processes like grinding and sieving are then required. However, this strategy tends to produce sharp-edged, irregular MIP bits with a limited scope of direct application. In addition, due to the creation of binding sites within the polymeric bulk, the issue of the hindrance of adsorbate diffusion (especially in the case of macromolecules) during template rebinding makes the MIPs prepared through this approach unsuitable for practical applications. Thus over the years, many efforts to address the limitations of conventional molecular imprinting techniques have resulted in new imprinting methodologies. Systems like suspension and precipitation polymerization, where MIPs with tunable morphologies can be prepared, have been developed. Additionally, strategies like surface imprinting have also been employed. Ultimately, both of these approaches have been combined to prepare regularly shaped surface-imprinted MIP beads. Such an approach incorporates the advantages of both methodologies at the same time. Given their desirable physical morphologies and favorable adsorption kinetics, MIPs prepared in this manner show significant promise for industrial applications. Therefore, they will be the main focus of this review.     

Grafting of molecularly imprinted polymers from the surface of silica gel particles via reversible addition-fragmentation chain transfer polymerization: A selective sorbent for theophylline

Molecularly imprinted polymers (MIPs) were grafted successfully from the surface of silica gel particles via surface initiated reversible addition-fragmentation chain transfer (RAFT) polymerization using RAFT agent functionalized silica gel as the chain transfer agent. The intrinsic characteristics of the controlled/living polymerization mechanism of RAFT allowed for the effective control of the grafting process. Thus the grafting copolymerization of methacrylic acid and divinyl benzene in the presence of template theophylline led to thin MIP film coating silica gel (MIP-Silica). The thickness of MIP film prepared in this study is about 1.98 nm, which was calculated from the nitrogen sorption analysis results. Measured binding kinetics for theophylline to the MIP-Silica and MIPs prepared by conventional bulk polymerization demonstrated that MIP-Silica had improved mass-transfer properties. In addition, the theophylline-imprinted MIP-Silica was used as the sorbent in solid-phase extraction to determine theophylline in blood serum with satisfactory recovery higher than 90%. Nonspecific adsorption of interfering compounds can be eliminated by a simple elution with acetonitrile, without sacrificing the selective binding of theophylline.     

Innovative method for the enrichment of high‐polarity bioactive molecules present at low concentrations in complex matrices

Ginsenoside Rg1 is a valuable bioactive molecule but its high polarity and low concentration in complex mixtures makes it a challenge to separate Ginsenoside Rg1 from other saponins with similar structures, resulting in low extraction efficiency. The successful development of effective Rg1 molecularly imprinted polymers that exhibit high selectivity and adsorption may offer an improved method for the enrichment of active compounds. In this work, molecularly imprinted polymers were prepared with two different methods, precipitation polymerization or surface imprinted polymerization. Comparison of the adsorption abilities showed higher adsorption of the surface molecularly imprinted polymers prepared by surface imprinted polymerization, 46.80 mg/g, compared to the 27.74 mg/g observed for the molecularly imprinted polymers prepared by precipitation polymerization. Therefore, for higher adsorption of the highly polar Rg1, surface imprinted polymerization is a superior technique to make Rg1 molecularly imprinted polymers. The prepared surface molecularly imprinted polymers were tested as a solid‐phase extraction column to directionally enrich Rg1 and its analogues from ginseng tea and total ginseng extracts. The column with surface molecularly imprinted polymers showed higher enrichment efficiency and better selectivity than a C₁₈ solid‐phase extraction column. Overall, a new, innovative method was developed to efficiently enrich high‐polarity bioactive molecules present at low concentrations in complex matrices.     

Facile preparation of polydopamine‐coated imprinted polymers on the surface of SiO2 for estrone capture in milk samples

Estrone molecularly imprinted polymers were synthesized through the self‐polymerization of dopamine on the surface of silica gels, which had the characteristics of mild polymerization conditions, simple reaction procedure and good specific recognition ability for estrone. The estrone molecularly imprinted polymers were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis and nitrogen adsorption–desorption tests. The characterization confirmed that the imprinted polymers were successfully grafted on the surface of silica gels. Through investigating the adsorption performance, the prepared estrone molecularly imprinted polymers exhibited high adsorption capacity, fast mass transfer, as well as excellent selectivity toward estrone. The estrone molecularly imprinted polymers as the solid‐phase extraction adsorbent coupled with high‐performance liquid chromatography was developed to determine estrone from the milk samples. The developed estrone molecularly imprinted polymer solid‐phase extraction with high‐performance liquid chromatography method exhibited satisfactory specificity, precision, accuracy and good linearity relationship in the range of 0.2–20 μg/mL. The developed method is simple, fast, effective and high specificity method and it provides a new method to detect the residues of estrone in animal foods.     

Selective high performance liquid chromatography imprinted-stationary phases for the screening of phenylurea herbicides in vegetable samples

Molecularly imprinted polymers (MIPs) for the determination of phenylurea herbicides have been synthesized by polymerisation of the appropriated reagents mixture within the pores of preformed spherical silica particles leading to a silica-MIP composite material. Subsequently, the silica matrix was etched away resulting in MIP beads which can be considered the "mirror image" of the original silica mold. The MIP particles were packed in stainless steal HPLC columns (125mmx4.6mm I.D.) and the materials were evaluated as imprinted-stationary phases for phenylurea herbicides. The imprinting effect of the originated specific binding sites for the selective recognition of phenylurea herbicides was clearly demonstrated. An efficient separation of a mixture of phenylurea herbicides in two groups, with or without a methoxy group in the chemical structure, was achieved and well shaped and defined peaks were obtained. Finally, the optimum imprinted column (prepared using linuron as template, 2-(trifluoromethyl)-acrylic acid as monomer, 72h of polymerisation time and the subsequent dissolution of silica matrix) was used for the LC-UV screening of phenylurea herbicides directly from vegetable sample extracts without any previous clean-up step at low concentration level in less than 10min.     

Molecular Recognition of the Fungicide Carbendazim by a Molecular Imprinted Polymer Obtained through a Mimic Template Approach

Abstract

A molecularly imprinted polymer recognizing the fungicide carbendazim was prepared using a mimicking template approach. Methyl-3-propylcarbamoyl-1H-benzimidazol-2-ylcarbamate was synthesized and used as a mimic template for polymer preparation. Selectivity of this polymer for carbendazim and structurally related substances (the template, fluberidazole, rabenzazole, thiabendazole, and benomyl and its two degradation products) was evaluated by liquid chromatography. Results demonstrate that imprinted polymer shows significant recognition properties for carbendazim, whereas the mimic and other carbendazim-related molecules are not recognized. This peculiar selectivity pattern can be explained as an imprinting effect due to the in situ formation of carbendazim from mimic degradation during the polymerization process.