MALDI-TOF-MS analysis of small molecules using modified mesoporous material SBA-15 as assisted matrix

Mesoporous silica, SBA-15 was successfully functionalized with quinoline moiety, and was applied as a matrix in the MALDI-TOF-MS analysis of small molecules. The modified SBA-15 material [SBA-15-8-(3-(triethoxysilyl)propoxy) quinoline, SBA-15-8QSi] was obtained by using calcined SBA-15 and 8-hydroxy quinoline. The structure of the functionalized mesoporous material was systemically characterized by TEM, the N₂ adsorption-desorption isotherm technique and FT-IR spectra. Compared with DHB and SBA-15, SBA-15-8QSi demonstrated several advantages in the analysis of small molecules with MALDI-TOF-MS, such as less background interference ions, high homogeneity, and better reproducibility. Based on these results, the various analytical parameters were optimized. The ideal operating conditions were (1) methanol used as the dissolving solvent; (2) sample first dropping method; (3) a ratio between the analyte and the matrix of 3.5:10. Under these optimization conditions, a low detection limit (8 pmol for L-Arginine-HCl) and high reproducibility (≤29%) were obtained. This technique was successfully applied to the analysis of various types of small molecules, such as saccharides, amino acids, metabolites, and natural honey.     

pH值响应性毒死蜱/铜席夫碱配合物改性SBA-15的制备及缓释性能

以3-氨丙基三乙氧基硅烷(APTES)、水杨醛和铜离子为改性剂,通过后嫁接法制得铜席夫碱配合物改性SBA-15(Cu-SBA-15),并以毒死蜱为模型药物,制备了毒死蜱/铜席夫碱配合物改性SBA-15缓释体系。利用TEM、SEM、XRD、N2吸附-脱附、TG、FTIR和XPS对SBA-15、氨基改性SBA-15(NH_2-SBA-15)、水杨醛希夫碱改性SBA-15(SA-SBA-15)的形貌、结构和Cu-SBA-15的配位情况进行了表征,考察了SBA-15在改性前后对毒死蜱的吸附量和缓释性能,并着重探究了毒死蜱/铜席夫碱配合物改性SBA-15载药体系在不同pH值下的释药行为。结果表明,APTES和水杨醛能够通过后嫁接法修饰于SBA-15,修饰后仍保持十分有序的孔道结构。SBA-15通过改性后,其对毒死蜱的吸附量由100 mg·g~(-1)增加至195 mg·g~(-1),且其对药物的缓释性能也得到改善。毒死蜱/铜席夫碱配合物改性SBA-15缓释体系显示出明显的pH值响应性,pH=3时的释药速率大于pH=11时,而在中性条件下的缓释效果相对最好。载药体系的释药行为可用Riger-Peppas动力学模型来描述,其药物释放由Fick扩散控制。     

pH值响应性毒死蜱/铜席夫碱配合物改性SBA-15的制备及缓释性能

以3-氨丙基三乙氧基硅烷（APTES）、水杨醛和铜离子为改性剂,通过后嫁接法制得铜席夫碱配合物改性SBA-15（Cu-SBA-15）,并以毒死蜱为模型药物,制备了毒死蜱/铜席夫碱配合物改性SBA-15缓释体系。利用TEM、SEM、XRD、N₂吸附-脱附、TG、FTIR和XPS对SBA-15、氨基改性SBA-15（NH₂-SBA-15）、水杨醛希夫碱改性SBA-15（SA-SBA-15）的形貌、结构和Cu-SBA-15的配位情况进行了表征,考察了SBA-15在改性前后对毒死蜱的吸附量和缓释性能,并着重探究了毒死蜱/铜席夫碱配合物改性SBA-15载药体系在不同pH值下的释药行为。结果表明,APTES和水杨醛能够通过后嫁接法修饰于SBA-15,修饰后仍保持十分有序的孔道结构。SBA-15通过改性后,其对毒死蜱的吸附量由100 mg·g^-1增加至195 mg·g^-1,且其对药物的缓释性能也得到改善。毒死蜱/铜席夫碱配合物改性SBA-15缓释体系显示出明显的pH值响应性,pH=3时的释药速率大于pH=11时,而在中性条件下的缓释效果相对最好。载药体系的释药行为可用Riger-Peppas动力学模型来描述,其药物释放由Fick扩散控制。     

Copolymers with fluorescence properties in mesoporous silica SBA-15:Synthesis and characterization

A novel copolymer with fluorescence properties in mesoporous silica SBA-15 was prepared via a combination of surface-initiated reversible addition-fragmentation chain transfer(RAFT) polymerization and "click" chemistry.A sufficient amount of peroxide groups were introduced into mesoporous silica SBA-15 channel pores and were further used to initiate the RAFT polymerization of styrene and 4-vinylbenzyl azide,resulting in SBA-15 supported polystyrene-co-poly(4-vinylbenzyl azide) copolymer(PS-co-PVBA/SBA-15) hybrid material.The samples were characterized by Fourier transform infrared spectroscopy(FT-IR),transmission electron microscopy(TEM),thermogravimetry analysis(TGA),N_2 adsorption-desorption isotherms and X-ray diffraction(XRD),respectively.The results show that the styrene and 4-vinylbenzyl azide had copolymerized inside mesoporous silica SBA-15.Subsequently,Npropargyl-carbazole(PC) was connected to PS-co-PVBA/SBA-15 hybrid material via "click" reaction,resulting in PS-co-PVBC/SBA-15 with carbazole side groups hybrid material.The fluorescence spectrum is dominated by a broad band from 350 nm to 400 nm in narrow region and the maximum peak is 362 nm,indicating the characteristic absorption of the carbazole group of PS-co-PVBC/SBA-15 hybrid material.     

Synthesis, characterization, and luminescence properties of the ternary europium complex covalently bonded to mesoporous SBA-15

A novel mesoporous SBA-15 type of hybrid material (phen-SBA-15) covalently bonded with 1,10-phenanthroline (phen) ligand was synthesized by co-condensation of tetraethoxysilane (TEOS) and the chelate ligand 5-[N,N-bis-3-(triethoxysilyl)propyl]ureyl-1,10-phenanthroline (phen-Si) in the presence of Pluronic P123 surfactant as a template. The preservation of the chelate ligand structure during the hydrothermal synthesis and the surfactant extraction process was confirmed by Fourier transform infrared (FTIR) and (29)Si MAS NMR spectroscopies. SBA-15 consisting of the highly luminescent ternary complex Eu(TTA)(3)phen (TTA = 2-thenoyltrifluoroacetone) covalently bonded to a silica-based network, which was designated as Eu(TTA)(3)phen-SBA-15, was obtained by introducing the Eu(TTA)(3).2H(2)O complex into the hybrid materials via a ligand exchange reaction. XRD, TEM, and N(2) adsorption measurements were employed to characterize the mesostructure of Eu(TTA)(3)phen-SBA-15. For comparison, SBA-15 doped with Eu(TTA)(3).2H(2)O and Eu(TTA)(3)phen complexes and SBA-15 covalently bonded with a binary europium complex with phen ligand were also synthesized, and were named SBA-15/Eu(TTA)(3), SBA-15/Eu(TTA)(3)phen, and Eu-phen-SBA-15, respectively. The detailed luminescence studies on all the materials showed that, compared with the doping sample SBA-15/Eu(TTA)(3)phen and binary europium complex functionalized sample Eu-phen-SBA-15, the Eu(TTA)(3)phen-SBA-15 mesoporous hybrid material exhibited higher luminescence intensity and emission quantum efficiency. Thermogravimetric analysis on Eu(TTA)(3)phen-SBA-15 demonstrated that the thermal stability of the lanthanide complex was evidently improved as it was covalently bonded to the mesoporous SBA-15 matrix.     

功能化离子液体修饰的SBA-15固定化Burkholderia cepacia脂肪酶

采用含不同碳链长度咪唑环的烷基功能化离子液体修饰介孔材料SBA-15,并通过X-射线衍射、元素分析、N2吸附-脱附、红外光谱和扫描电镜等方法研究了离子液体修饰对SBA-15结构的影响.以三乙酸甘油酯的水解为探针反应,考察了甲基、丁基、辛基等不同链长烷基取代咪唑类离子液体修饰的SBA-15固定化Burkholderia cepacia脂肪酶(BCL)的酶活、最适反应条件及稳定性等酶学性质.结果表明,离子液体修饰后材料保持了原有的介孔结构,其固定化酶对温度及低pH的敏感度降低,比活力及稳定性均显著提高.其中甲基功能化离子液体修饰的SBA-15固定化酶的比活力最高,是原粉SBA-15固定化酶的2.4倍;辛基功能化离子液体修饰的SBA-15固定化酶的热稳定性、储存稳定性、重复使用性及有机溶剂耐受性最佳.     

镁热还原法制备有序介孔Si/C锂离子电池负极材料及其电化学性能

以SBA-15为前驱体,在660 ℃下通过镁热还原反应得到介孔硅材料,并对其进行碳包覆处理,成功地制备了有序介孔Si/C（OMP-Si/C）复合材料。该OMP-Si/C材料保留了SBA-15模板的有序蜂窝孔道,并且形成具有高堆积密度的莲藕链束结构。文中还提出了一个SBA-15镁热还原液态环境反应模型,探讨了660 ℃下硅的高度有序介孔与莲藕链束结构的形成机理。利用X射线衍射（XRD）仪、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、氮气吸脱附法及拉曼光谱对样品物相和微观形貌进行了表征。这种高度有序介孔Si/C复合材料具有优异的电化学性能,展现出其在第二代锂电池负极材料领域中的潜在应用价值。     

氨基功能化短孔道有序介孔材料H_2N-Zr-Ce-SBA-15的合成及吸附性能

以pluronic(P123)为模板剂,正硅酸乙酯(TEOS)为硅源,氯化氧锆和硝酸亚铈为无机前驱盐,N-(2-氨乙基)-3-氨丙基三甲氧基硅烷(AAPTS)为硅烷化试剂,采用后接枝法合成了氨基功能化六方板状短孔道有序介孔材料H2N-Zr-Ce-SBA-15(H2N-ZCS).采用小角X射线衍射(LXRD)、傅里叶变换红外(FTIR)光谱、透射电子显微镜(TEM)、扫描电子显微镜(SEM)、热重分析、N2吸附/脱附等手段对H2N-ZCS进行了表征.结果表明AAPTS成功地嫁接到有序介孔材料上,H2N-ZCS仍保持了类似于传统SBA-15高度有序的二维六方相介孔结构,且孔道方向垂直于该六方板面.对阴离子染料酸性品红吸附实验表明,H2N-ZCS比H2N-SBA-15具有较强的吸附能力.这种功能化短孔道、大径轴比的六方板状介孔材料在吸附、分离及催化等领域中能更有效地促进分子的扩散传递.     

离子液体功能化有序介孔SBA-15孔壁定域化磷钨酸催化活性中心构建及其催化性能

采用溶胶-凝胶法合成了一种桥键嵌入型双咪唑离子液体功能化介孔硅基材料(Bis-PImBr-PMO-SBA-15),然后离子交换将Keggin型磷钨酸负载于其上,制备了PW-Bis-PImBr-PMO-SBA-15催化剂,并运用X射线衍射、N2吸附-脱附、透射电子显微镜、傅里叶变换红外光谱和热重分析等手段对其进行表征.结果表明,该催化剂具有SBA-15分子筛的有序六方孔道结构,且负载后的磷钨酸阴离子仍保持其完整的Keggin结构.在以水为溶剂,30%H2O2为氧化剂的苯甲醇氧化反应中,该催化剂表现出比均相的或负载于SBA-15表面的Keggin型HPW更高的催化活性,苯甲醇转化率和苯甲醛选择性分别可达95%和94%.离子液体的咪唑阳离子可调节磷钨酸阴离子的氧化-还原性能,从而有利于提高催化剂的催化活性..     

Co(Ⅲ)官能化SBA-15的制备、表征及其催化环己烯环氧化

通过环戊二烯基修饰的SBA-15(SBA-15-Cp)与马来酸酐的Diels-Alder反应及水解合成了邻二羧酸官能化的SBA-15,并将原位生成的Co(Ⅲ)络合物负载于其上制得Co(Ⅲ)官能化SBA-15样品SBA-15-Co(Ⅲ).傅里叶变换红外光谱、元素分析和X射线光电子能谱法结果证实羧酸官能团和Co(Ⅲ)成功地...     

FexOy/SBA-15介孔分子筛的合成以及性能研究

在酸性溶液中利用溶胶凝胶-pH值控制两步法直接合成Fe_xO_y/SBA-15介孔分子筛，同时利用场发射扫描电子显微镜(FESEM)、小角度X射线衍射(Low-angle XRD)、透射电子显微镜(TEM)以及振动样品磁强计(VSM)对制备的各种SBA-15介孔分子筛进行结构以及性能的测试、表征。结果显示Fe_xO_y均匀地分散在SBA-15的骨架中，而且会对SBA-15介孔分子筛起钉轧作用。而后着重研究了Fe_xO_y的加入对SBA-15介孔分子筛的热稳定性、催化特性以及磁学性能的影响。Fe_xO_y的引入可以增加制备的SBA-15介孔分子筛的热稳定性;Fe_xO_y的引入可以改善SBA-15介孔分子筛的催化活性，得到了开口的、石墨化程度较好的纳米碳管。Fe_xO_y的引入使SBA-15介孔分子筛具有明显的铁磁性。     

Synthesis,characterization, and applications of novel Co(II)-pyridoxal phosphate-Schiff base/SBA-15 as a nanocatalyst for the green synthesis of benzothiazole heterocycles

Mesoporous heterogeneous santa barbara amorphous (SBA)-15-supported cobalt complex, as a novel nanocatalyst containing N–O chelating Schiff-base ligand was successfully synthesized by the reaction of SBA-15 and Cobalt(II)-Schiff-base complex. The Co(II)-Schiff base complex also was prepared for the first time, by the reaction of pyridoxal 5′-phosphate or PLP (biological active form of vitamin B6), 3-(aminopropyl)-triethoxysilane in methanol that complexation with CoCl₂. The subsequent grafting of entitled complex to SBA-15 afforded Co(II)-PLP-Schiff base/SBA-15 mesoporous catalyst. Characterization of the product was carried out with powder X-ray diffraction, Brunauer–Emmett–Teller nitrogen adsorption–desorption, transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis, atomic absorption spectroscopy, and inductively coupled plasma, Fourier-transform infrared spectroscopy. The results revealed the retention of the textural properties and hexagonally uniform structures of SBA-15 during the grafting procedure. This nanocatalyst was applied successfully for one-pot synthesis of various benzothiazole heterocycles under green conditions. This catalyst is an active, reusable, and stable nanomaterial with no leaching of metal ions to the reaction medium. It was used for the synthesis of desired benzothiazole heterocycles by the cyclo-condensation of aryl-aldehydes with 2-aminothiophenol with good to excellent yields and under green conditions.     

Functionalized ionic liquid modified mesoporous silica SBA-15: a novel, designable and efficient carrier for porcine pancreas lipase

A series of functionalized ionic liquid modified mesoporous silicas SBA-15 (FIL-SBA) were synthesized by modulating the loading and cation/anion ratio of the functionalized ionic liquid (FIL). The prepared materials FIL-SBA were used as a novel carrier system to immobilize porcine pancreas lipase (PPL). Enzymatic activity and reusability of the immobilized enzyme were investigated using the triacetin hydrolysis reaction. The combined advantages of the nano-sized pore diameter, large surface area and high pore volume of SBA-15, and the tunable properties of the FIL for enzymes immobilized in FIL-SBA gave a maximum improvement of 570% in relative activity, with 63% retention of initial activity after five cycles of use. Carriers and immobilized enzymes were characterized using nitrogen adsorption, small-angle X-ray diffraction (SXRD), Fourier transform infrared (FT-IR), elemental analysis, nuclear magnetic resonance (NMR), scanning and transmission electron microscopy (SEM and TEM). It was shown that the introduction of FIL influenced the catalytic behavior of PPL significantly by changing the structure and surface properties of the carriers.     

SBA-15负载Pd催化剂的制备及其在Heck反应中的应用研究

利用水热反应制备了表面离子液体功能化的SBA-15介孔材料,在丙酮溶液中与氯化钯反应,然后使用水合肼在乙醇中还原.测试了这种催化剂在Mizoroki-Heck反应中的催化活性.与直接负载在SBA-15上的钯催化剂相比,这种表面修饰的介孔SBA-15负载催化剂表现出更高的催化活性、可回收性和反应稳定性.氮气吸脱附实验和小角XRD衍射实验表明,在合成中,材料的介孔性能并没有被破坏.透视电镜也表征了该材料的表面形貌.最后,Mizoroki-Heck反应表明该催化剂具有很高的催化活性,且循环五次后,其催化活性降低并不明显.     

SBA-15负载的Cu(Ⅱ)席夫碱配合物催化的苯乙烯氧化反应制备苯甲醛

采用一步法将原硅酸四乙酯与3-氨丙基三乙氧基硅烷在表面活性剂P123作用下,酸性共水解制备出氨基功能化的介孔分子筛SBA-15(NH2-SBA-15),再利用其中氨基与水杨醛的缩合反应制备SBA-15固载的席夫碱,该席夫碱与Cu(NO3)2溶液反应最终制成固定于SBA-15的Cu(II)席夫碱配合物多相催化剂Cu-SBA-15.采用X射线衍射、红外光谱仪、紫外可见分光光度计、场发射电镜、透射电镜、N2吸附-脱附、元素分析、原子发射光谱和热重分析对催化剂进行了表征,并将此催化剂用于无有机溶剂条件下催化氧化苯乙烯制备苯甲醛,考察了反应时间、反应温度、H2O2用量、水的用量、催化剂用量对反应的影响.当反应温度为100°C,反应时间8 h,H2O2与苯乙烯的摩尔比为2:1,不额外添加溶剂,且催化剂用量为3.8 wt%时,苯乙烯的转化率最高为84.4%,苯甲醛选择性为83.9%,催化剂的TOF值为261.1 h–1,并且重复使用3次后活性没有明显下降.规则的孔道、较大的比表面积以及分布均匀的活性中心可能是催化剂活性提高的原因.     

Functionalized SBA-15 materials as carriers for controlled drug delivery: influence of surface properties on matrix-drug interactions

Mesoporous SBA-15 materials were functionalized with amine groups through postsynthesis and one-pot synthesis, and the resulting functionalized materials were investigated as matrixes for controlled drug delivery. The materials were characterized by FTIR, N(2) adsorption/desorption analysis, zeta potential measurement, XRD, XPS, and TEM. Ibuprofen (IBU) and bovine serum albumin (BSA) were selected as model drugs and loaded onto the unmodified and functionalized SBA-15. It was revealed that the adsorption capacities and release behaviors of these model drugs were highly dependent on the different surface properties of SBA-15 materials. The release rate of IBU from SBA-15 functionalized by postsynthesis is found to be effectively controlled as compared to that from pure SBA-15 and SBA-15 functionalized by one-pot synthesis due to the ionic interaction between carboxyl groups in IBU and amine groups on the surface of SBA-15. However, SBA-15 functionalized by one-pot synthesis is found to be more favorable for the adsorption and release of BSA due to the balance of electrostatic interaction and hydrophilic interaction between BSA and the functionalized SBA-15 matrix.     

Efficient solvent-free synthesis of pyridopyrazine and quinoxaline derivatives using copper-DiAmSar complex anchored on SBA-15 as a reusable catalyst

A catalytic system comprising mesoporous silica functionalized with Cu(II)-DiAmSar was synthe-sized. This was demonstrated as an efficient heterogeneous catalyst for the synthesis of biologically useful pyridopyrazine and quinoxaline heterocycles under solvent-free conditions. X-ray diffraction, transmission electron microscopy, N2 adsorption-desorption, Fourtier transformation infrared spectroscopy, and thermogravimetric analysis were used to characterize the catalyst and investi-gate the texture of SBA-15 during the grafting process.     

SBA-15锚定Cu(Ⅱ)-DiAmSar配合物催化剂上无溶剂高效合成吡啶并吡嗪和喹喔啉衍生物（英文）

A catalytic system comprising mesoporous silica functionalized with Cu(II)-DiAmSar was synthesized. This was demonstrated as an efficient heterogeneous catalyst for the synthesis of biologically useful pyridopyrazine and quinoxaline heterocycles under solvent-free conditions. X-ray diffraction, transmission electron microscopy, N2 adsorption-desorption, Fourtier transformation infrared spectroscopy, and thermogravimetric analysis were used to characterize the catalyst and investigate the texture of SBA-15 during the grafting process.     

Highly porous silica-polyaniline nanocomposite as a novel solid-phase microextraction fiber coating

A highly porous fiber-coated SBA-15/polyaniline material was prepared for solid-phase microextraction (SPME). The SBA-15/polyaniline nanocomposite was synthesized via chemical polymerization. The prepared SBA-15/polyaniline particles were analyzed by scanning electron microscopy analysis. The prepared nanomaterial was immobilized onto a stainless steel wire for fabrication of the SPME fiber. The fiber was evaluated for the extraction of some polycyclic aromatic hydrocarbons (PAHs) from aqueous sample solutions in combination with gas chromatography-mass spectrometry (GC-MS). In optimum conditions (extraction temperature 60°C, extraction time 40 min, ionic strength 20%, stirring rate: 500 rpm, desorption temperature 260°C, desorption time 2 min), the repeatability for one fiber (n=3), expressed as relative standard deviation (RSD%), was between 5.3 and 8.6% for the test compounds. For deionized water, spiked with selected PAHs, the detection limits for the studied compounds were between 2 and 20 pg/mL.     

Synthesis of carboxyl-modified rod-like SBA-15 by rapid co-condensation

Carboxyl-modified SBA-15 rod-like mesoporous materials have been synthesized by a facile rapid co-condensation of tetraethylorthosilicate (TEOS) and 2-cyanoethyltriethoxysilane (CTES), followed by hydrolysis of cyanide groups in sulfuric acid. The concentration of carboxylic groups was varied by changing the silica source ratio of CTES/TEOS from 0.05 to 0.3. X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed that the uniform ordered mesoporous structure and rod-like morphology of SBA-15 have been preserved even at the high concentration of carboxylic groups employed. Characterization by Fourier transformed infrared spectroscopy (FTIR), solid-state NMR investigation indicated that carboxylic groups have been successfully grafted onto the surface of SBA-15 through siloxane bonds [(O(3))SiCH(2)CH(2)COOH. The negative charges of the modified SBA-15 materials were enhanced by the presence of the carboxylic groups on the surface. The capacity of lysozyme adsorption of the modified SBA-15 materials were found to be significantly improved as compared with pure silica SBA-15. The maximum amount of lysozyme adsorption on carboxyl-modified was increased with the pH of solution increased from 5.5 to 9.0.