首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
In this paper, an adaptive output feedback control algorithm based on the dynamic surface control (DSC) is proposed for a class of uncertain chaotic systems. Because the system states are assumed to be unavailable, an observer is designed to estimate those unavailable states. The main advantage of this algorithm can overcome the problem of “explosion of complexity” inherent in the backstepping design. Thus, the proposed control approach is simpler than the traditional backstepping control for the uncertain chaotic systems. The stability analysis shows that the system is stable in the sense that all signals in the closed-loop system are uniformly ultimately bounded (UUB) and the system output can track the reference signal to a bounded compact set. Finally, an example is provided to illustrate the effectiveness of the proposed control system.  相似文献   

2.
针对传统最优末制导律鲁棒性能较弱,且对参数摄动及外扰敏感的不足,而滑模控制对扰动具有较强鲁棒性的优点,提出一种新的基于反演准连续高阶滑模的最优末制导律,其中反演控制能够有效保证系统全局稳定性,而准连续高阶滑模控制则用于消除扰动影响。为了去除抖振效果,引入自适应超螺旋算法在线更新控制参数以消除符号函数导致的高频抖振影响。仿真结果表明:飞行器在该末制导律导引下,弹目视线角速率快速收敛,从而保证飞行器有很高的命中精度;鲁棒性较强;能够较好的满足约束条件要求。  相似文献   

3.
Kuz’menko  A. A. 《Nonlinear dynamics》2022,109(3):1763-1775

Synchronization of chaotic systems is considered to be a common engineering problem. However, the proposed laws of synchronization control do not always provide robustness toward the parametric perturbations. The purpose of this article is to show the use of synergy-cybernetic approach for the construction of robust law for Arneodo chaotic systems synchronization. As the main method of design of robust control, the method of design of control with forced sliding mode of the synergetic control theory is considered. To illustrate the effectiveness of the proposed law, in this article it is compared with the classical sliding mode control and adaptive backstepping. The distinctive features of suggested robust control law are the more good compensation of parametric perturbations (better performance indexes—the root-mean-square error (RMSE), average absolute value (AVG) of error) without designing perturbation observers, the ability to exclude the chattering effect, less energy consuming and a simpler analysis of the stability of a closed-loop system. The study of the proposed control law and the change of its parameters and the place of parametric perturbation’s application is carried out. It is possible to significantly reduce the synchronization error and RMSE, as well as AVG of error by reducing some parameters, but that leads to an increase in control signal amplitude. The place of application of parametric disturbances (slave or master system) has no effect on the RMSE and AVG of error. Offered approach will allow a new consideration for the design of robust control laws for chaotic systems, taking into account the ideas of directed self-organization and robust control. It can be used for synchronization other chaotic systems.

  相似文献   

4.
Zhang  Mingyue  Guan  Yongliang  Li  Chao  Luo  Sha  Li  Qingdang 《Nonlinear dynamics》2023,111(9):8347-8368

A composite controller based on a backstepping controller with an adaptive fuzzy logic system and a nonlinear disturbance observer is proposed in this paper to address the disturbance and uncertainty issues in the control of the optoelectronic stabilized platform. The matched and unmatched disturbances and system uncertainty are included in the stabilized platform model. The system's uncertainty and disturbance are approximated and estimated using an adaptive fuzzy logic system and a nonlinear disturbance observer. Moreover, the backstepping control algorithm is utilized to control the system. The simulations are performed in four states to confirm the viability of the proposed control technique. The proportional integral controller, proportional integral-disturbance observer controller, and fuzzy backstepping controller are contrasted with the proposed controller. It has been noted that the proposed controller's instantaneous disturbance's highest value is 5.1°/s. The maximal value of the coupling output for the two gimbals utilizing the proposed controller, however, is 0.0008°/s and 0.0018°/s, respectively. The findings presented here demonstrate that the backstepping controller, which is based on an adaptive fuzzy logic system and a nonlinear disturbance observer, is capable of precise tracking and dynamic tracking of a stabilized platform under disturbance and uncertainty.

  相似文献   

5.
Yang  Guichao  Wang  Hua  Chen  Jie  Zhang  Hao 《Nonlinear dynamics》2020,101(4):2325-2342

For the barrier Lyapunov function-based control of full-state time-varying constrained systems via the traditional backstepping technology, due to repeated differentiations of virtual control functions involving time-varying barriers, the adverse effects of “explosion of complexity” caused by the backstepping iteration are more serious, which even makes it impossible to implement for high-order systems. In order to eliminate this negative influence, we take advantage of the command filtered backstepping approach which introduces a command filter to approximate the constructed virtual control law in each procedure of the backstepping design. More importantly, the approximate errors arising from the introduced filters will be removed by constructing a series of compensating signals. Meanwhile, some relatively conservative assumptions will be released compared with existing control strategies. Furthermore, largely unknown external disturbances that may exist in the system will be estimated in real-time via high-gain disturbance observers and then compensated feedforwardly in designing the controller. Specially, the scheme of the resulting control algorithm is simple and online computation time is saved. Finally, the stability of the whole closed-loop system and the control performance is strictly certificated, respectively.

  相似文献   

6.
A robust model reference backstepping (multiple-surfaces) controller is proposed for radial pneumatic motor motion systems with variable inlet pressure and mismatched uncertainties (time-varying payload). A radial pneumatic motor is first modeled by a non-autonomous equation with consideration of a ball screw table. A practical integral action and robust action are included in the backstepping design to compensate for the disturbance, mismatched uncertainty, and to eliminate the steady state error. The motion system is proved to have asymptotically stable performance and the experimental results show that the proposed controller is able to track the reference model output signal and maintain steady-state error.  相似文献   

7.
Considering the use of digital computers and samplers in the control circuitry, this paper describes the controller design in discrete time for the longitudinal dynamics of a generic hypersonic flight vehicle (HFV) with Neural Network (NN). Motivated by time-scale decomposition, the states are decomposed into slow dynamics of velocity, altitude and fast dynamics of attitude angles. By command transformation, the reference command for γ?θ p ?q subsystem is derived from h?γ subsystem. Furthermore, to simplify the backstepping design, we propose the controller for γ?θ p ?q subsystem from prediction function without virtual controller. For the velocity subsystem, the throttle setting constraint is considered and new NN adaption law is designed by auxiliary error dynamics. The uniformly ultimately boundedness (UUB) of the system is proved by Lyapunov stability method. Simulation results show the effectiveness of the proposed algorithm.  相似文献   

8.
In this paper, an adaptive fuzzy output-feedback control approach is proposed for a class of uncertain nonlinear systems with unknown nonlinear functions, unmodeled dynamics, and without the measurements of the states. The fuzzy logic systems are used to approximate the unknown nonlinear functions, and a fuzzy state observer is designed for estimating the unmeasured states. To solve the problem of unmodeled dynamics, the dynamical signal combined with changing supply function is incorporated into the backstepping recursive design technique. Under the framework of the backstepping control design technique and incorporated by the predefined performance technique, a new robust adaptive fuzzy output feedback control scheme is constructed. It is shown that all the signals of the resulting closed-loop system are bounded, and the system output remains an adjustable neighborhood of the origin with the prescribed performance bounds. A simulation example and comparison with the previous control methods are provided to show the effectiveness of the proposed control approach.  相似文献   

9.
Trajectory tracking of a mobile manipulator is a challenging research because of its complex nonlinearity and dynamics. This paper presents an adaptive control strategy for trajectory tracking of a mobile manipulator system that consists of a wheeled platform and a modular manipulator. When a robot system moves in the presence of sliding, it is difficult to accurately track its trajectory by applying the backstepping approach, even if we employ a non-ideal kinematic model. To address this problem, we propose using a combination of adaptive fuzzy control and backstepping approach based on a dynamic model. The proposed control scheme considers the dynamic interaction between the platform and manipulator. To accurately track the trajectory, we propose a fuzzy compensator in order to compensate for modeling uncertainties such as friction and external disturbances. Moreover, to reduce approximation errors and ensure system stability, we include a robust term to the adaptive control law. Simulation results obtained by comparing several cases reveal the presence of the dynamic interaction and confirm the robustness of the designed controller. Finally, we demonstrate the effectiveness and merits of the proposed control strategy to counteract the modeling uncertainties and accurately track the trajectory.  相似文献   

10.
In this paper, an adaptive fuzzy backstepping output feedback dynamic surface control (DSC) approach is developed for a class of multiinput and multioutput (MIMO) stochastic nonlinear systems with immeasurable states. Fuzzy logic systems are firstly utilized to approximate the unknown nonlinear functions, and then a fuzzy state observer is designed to estimate the immeasurable states. By combining adaptive backstepping technique and dynamic surface control (DSC) technique, an adaptive fuzzy output feedback backstepping DSC approach is developed. The proposed control method not only overcomes the problem of ??explosion of complexity?? inherent in the backstepping design methods, but also the problem of the immeasurable states. It is proved that all the signals of the closed-loop adaptive control stochastic system are semiglobally uniformly ultimately bounded (SUUB) in probability, and the observer errors and the output of the system converge to a small neighborhood of the origin. Simulation results are provided to show the effectiveness of the proposed approach.  相似文献   

11.
The robust adaptive fuzzy control problem is investigated for a single machine bus system with static var compensator (SVC). This design does not require that speed of the generator rotor and susceptance of the overall system are measured, and also does not require that the parameters of controlled system are known accurately. The fuzzy logic systems are used to approximate the nonlinear functions of the system, and a fuzzy state observer is designed to estimate the speed of the generator rotor and susceptance. By utilizing the fuzzy state observer, and combining the adaptive backstepping technique with adaptive fuzzy control design, an observer-based adaptive fuzzy output-feedback control approach is developed. It is proved that the proposed control approach can guarantee that all the signals in the closed-loop system are semiglobally uniformly ultimately bounded (SGUUB), and the angle of the generator rotor follows a desired value. Simulation results are presented to show the effectiveness of the approach.  相似文献   

12.
梁捷  陈力 《计算力学学报》2014,31(4):459-466
空间机器人系统的柔性主要体现在空间机器人的臂杆和连接各臂杆之间的铰关节。由于空间机器人系统结构的复杂性,以往研究人员对同时具有柔性关节和柔性臂的系统关注不够。为此探讨了参数未知柔性关节-柔性臂空间机器人系统的动力学模拟、轨迹跟踪控制算法设计和关节、臂杆双重柔性振动的主动抑制问题。首先,采用多体动力学建模方法并结合漂浮基空间机器人固有的线动量和角动量守恒动力学特性,推导了系统的动力学方程。以此为基础,考虑到空间机器人实际应用中各关节铰具有较强柔性的情况,引入一种关节柔性补偿控制器解决了传统奇异摄动法应用受关节柔性限制问题,导出了适用于控制系统算法设计的数学模型。然后,利用该模型,基于反演思想在慢时标子系统中设计神经网络自适应控制算法来补偿系统参数未知和柔性关节引起的转动误差,实现系统运动轨迹跟踪性能;针对快时标子系统,设计了鲁棒最优控制算法抑制因柔性关节及柔性臂引起的系统双重弹性振动,保证系统的稳定性。最后,通过仿真对比实验验证了所设计控制算法的有效性。  相似文献   

13.
针对带不匹配不确定非线性干扰的惯性平台稳定回路跟踪控制问题,提出了基于backstepping的动态滑模控制方法。首先,建立了惯性平台稳定回路的等价模型,该模型由一个线性模型加上一个不确定的非线性函数组成。然后,基于backstepping方法设计了带渐近稳定滑模面的动态滑模控制器,解决了模型不匹配的问题,并提高了系统的鲁棒性。进而应用Lyapunov稳定性理论证明了所设计的控制器不仅能保证闭环系统的稳定性,而且可以通过选择适当的控制器参数来调整跟踪误差的收敛率。最后,仿真结果表明,基于backstepping的动态滑模控制方法与PID控制方法相比,提高了系统的跟踪精度,增强了鲁棒性。  相似文献   

14.
A novel robust hybrid tracking control for robotic system is proposed. This hybrid control scheme combines computed torque control (CTC) with neural network, variable structure control (VSC) and nonlinear H ?? control methods. It is assumed that the nominal system of robotic system is completely known, which is controlled by using CTC method. Neural network is designed to approximate parameter uncertainties, VSC is used to eliminate the effect of approximation error, and H ?? control is employed to achieve a desired robust tracking performance. Based on Lyapunov stability theorem, it can be guaranteed that all signals in closed loop are bounded and a specified H ?? tracking performance is achieved by employing the proposed robust hybrid control. The validity of the control scheme is shown by computer simulation of a two-link robotic manipulator.  相似文献   

15.
In this paper, a fuzzy adaptive output feedback control approach is developed for a class of SISO strict-feedback nonlinear systems with unmeasured states, unmodeled dynamics, and dynamical disturbances. In the backstepping recursive design, fuzzy logic systems are used to approximate the unknown nonlinear functions, a fuzzy adaptive high-gain observer is designed to estimate the unmeasured states; a dynamic signal is incorporated into the control scheme to dominate the dynamic uncertainties. Using the states estimates and combining the backstepping design technique, a fuzzy adaptive output feedback control is constructed recursively. It is proved that the proposed fuzzy adaptive output feedback control scheme can guarantee the all signals in the closed-loop system are semiglobally uniformly ultimately bounded (SUUB), and the observer and tracking error converges to a small neighborhood of the origin. The effectiveness of the proposed approach is illustrated via an example.  相似文献   

16.
This study presents a self-organizing functional-linked neuro-fuzzy network (SFNN) for a nonlinear system controller design. An online learning algorithm, which consists of structure learning and parameter learning of a SFNN, is presented. The structure learning is designed to determine the number of fuzzy rules and the parameter learning is designed to adjust the parameters of membership function and corresponding weights. Thus, an adaptive self-organizing functional-linked neuro-fuzzy control (ASFNC) system, which is composed of a computation controller and a robust compensator, is proposed. In the computation controller, a SFNN observer is utilized to approximate the system dynamic and the robust compensator is designed to eliminate the effect of the approximation error introduced by the SFNN observer upon the system stability. Finally, to show the effectiveness of the proposed ASFNC system, it is applied to a chaotic system. The simulation results demonstrate that favorable control performance can be achieved by the proposed ASFNC scheme without any knowledge of the control plants and without requiring preliminary offline tuning of the SFNN observer.  相似文献   

17.
In this paper, a novel adaptive interval type-2 fuzzy sliding mode control (AIT2FSMC) methodology is proposed based on the integration of sliding mode control and adaptive interval type-2 fuzzy control for chaotic system. The AIT2FSMC system is comprised of a fuzzy control design and a hitting control design. In the fuzzy control design, an interval type-2 fuzzy controller is designed to mimic a feedback linearization (FL) control law. In the hitting control design, a hitting controller is designed to compensate the approximation error between the FL control law and the interval type-2 fuzzy controller. The parameters of the interval type-2 fuzzy controller, as well as the uncertainty bound of the approximation error, are tuned adaptively. The adaptive laws are derived in the sense of Lyapunov stability theorem, thus the stability of the system can be guaranteed. The proposed control system compared to adaptive fuzzy sliding mode control (AFSMC). Simulation results show that the proposed control systems can achieve favorable performance and robust with respect to system uncertainties and external disturbances.  相似文献   

18.
Backstepping design is proposed for adaptive synchronization of a class of chaotic systems with unknown bounded uncertainties. An adaptive backstepping control law is derived to make the error signals between the master and slave systems asymptotically synchronized without knowing the upper-bounds of the uncertainties in advance. The stability analysis is proved by using a well-known Lyapunov stability. Two illustrative examples are presented to show the effectiveness of the proposed adaptive chaos synchronization.  相似文献   

19.
In this paper, two kinds of combination synchronization between two drive systems and one response system are investigated using active backstepping design. Firstly, increased-order combination synchronization between Lorenz system, Rössler system and hyperchaotic Lü system is considered. Secondly, reduced-order combination synchronization between hyperchaotic Lorenz system, hyperchaotic Chen system and Lü system is considered. According to Lyapunov stability theory and active backstepping design method, the corresponding controllers are both designed. Finally, several numerical examples are provided to illustrate the obtained results.  相似文献   

20.
Bing Zhu 《Nonlinear dynamics》2014,78(3):1695-1708
In this paper, a nonlinear adaptive neural network control is proposed for trajectory tracking of a model-scaled helicopter. The purpose of this research is to reduce the ultimate bounds of tracking errors resulted from small coupling forces (or small parasitic body forces) and aerodynamic uncertainties. The proposed control is designed under backstepping framework, with neural network compensators being added. Updating laws of neural networks are designed through projection algorithm, so that adaptive parameters are bounded. Derivatives of virtual controls are obtained through command filters. It is proved that, by using neural network compensators, tracking errors of the closed-loop system can be restricted within very small ultimate bounds. Superiority of the proposed nonlinear adaptive neural network control over a backstepping control is demonstrated by simulation results.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号