Action of phosphatidylinositol-specific phospholipase C from Bacillus thuringiensis is significantly influenced by coexisting lipids in substrate-detergent micelles.

The effects of phosphatidylcholine (PC), phosphatidylethanolamine (PE), sphingomyelin (SM), and cholesterol on the activity of phosphatidylinositol-specific phospholipase C (PI-PLC) from Bacillus thuringiensis were studied in detail in phosphatidylinositol (PI)/detergent mixed micelles. By addition of PC, the enzymatic hydrolysis of PI was significantly stimulated in PI/Triton X-100 as well as PI/sodium deoxycholate (SDC) mixed micelles. SM stimulated enzyme activity toward PI/Triton X-100 micelles at a lower molar ratio of SM to PI, but was rather inhibitory at a ratio higher than 2.0. The enzyme activity became significantly lower with an increase of PE or cholesterol in PI/Triton X-100 micelles. Actually, both PE and cholesterol were intensively inhibitory when added at a higher molar ratio to PI in Triton X-100-containing micelles. In the system of PI/SDC mixed micelles, not only PC but also SM, PE and cholesterol enhanced the enzymatic hydrolysis of PI. The difference between PI/Triton X-100 and PI/SDC micelles regarding the effects of these lipids on PI-PLC action, must be dependent on the physical state of micelles formed by these detergents and lipids.     

The effects of coexisting lipids on the action of Bacillus thuringiensis phosphatidylinositol-specific phospholipase C toward liposomal substrate.

The hydrolytic activity of phosphatidylinositol (PI)-specific phospholipase C (PI-PLC) from Bacillus thuringiensis was studied in detail toward mixed liposomes consisting of PI and one of other phospholipids and cholesterol. Among PI-liposomes, small unilamellar vesicles (SUV) were the most sensitive to PI-PLC; the enzymatic hydrolysis of PI in SUV was not less than 10-fold that in large unilamellar vesicles (LUV) or in multilamellar vesicles (MLV). Thus, in a survey of the effects of coexisting lipids on PI-PLC activity, PI-SUV was used. Phosphatidylcholine (PC) was stimulative for the enzyme activity toward PI-SUV at any molar ratio of PC to PI. Also, the effects of the addition of sphingomyelin (SM), phosphatidylethanolamine (PE) and cholesterol on the enzymatic hydrolysis of PI were studied in detail on the basis of concentration of total lipids or PI.     

Synthesis and properties of organosoluble polyimides based on 4,4′‐bis(4‐amino‐2‐trifluoromethylphenoxy)benzophenone

A novel, fluorinated diamine monomer with the ether–ketone group, 4,4′‐bis(4‐amino‐2‐trifluoromethylphenoxy)benzophenone ( 2 ), was prepared through the nucleophilic substitution reaction of 2‐chloro‐5‐nitrobenzotrifluoride and 4,4′‐dihydroxybenzophenone in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C. Flourinated polyimides (PIs) 5a – f and copolyimides (co‐PIs) 5c / a – f were synthesized from 2 and various commercial aromatic dianhydrides via thermal or chemical imidization. PIs 5a – f had inherent viscosities ranging from 0.72 to 1.22 dL/g. Besides the chemical imidization of 5c ( C ), the 5 ( C ) series were soluble in amide‐type solvents and even in less polar solvents, but PIs 5a – f prepared via thermal imidization were insoluble. PI films 5a – f exhibited tensile strengths ranging from 92 to 112 MPa, elongations at break from 8 to 15%, and initial moduli from 2.0 to 2.1 GPa. The glass‐transition temperatures of the 5 series were in the range of 232–278 °C, and the 10% weight‐loss temperatures were above 535 °C, with more than a 50% char yield at 800 °C in nitrogen. In comparison of the PI 5 series with the analogous non‐fluorinated PIs 6 series based on 4,4′‐bis(4‐aminophenoxy)benzophenone, the 5 series revealed better solubility, lower color intensity, dielectric constant, and moisture absorption. Their PI films had cutoff wavelengths between 370 and 410 nm, b* values ranging from 9.6 to 58.3, dielectric constants of 3.05–3.64 (1 MHz), with moisture absorption in the range of 0.08–0.38 wt %. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 222–236, 2004     

Protease Inhibitors Purified from the Canola Meal Extracts of Two Genetically Diverse Genotypes Exhibit Antidiabetic and Antihypertension Properties

Valorization of vegetable oil waste residues is gaining importance due to their high protein and polyphenol contents. Protease inhibitors (PIs), proteins from these abundantly available waste residues, have recently gained importance in treating chronic diseases. This research aimed to use canola meal of genetically diverse Brassica napus genotypes, BLN-3347 and Rivette, to identify PIs with diverse functionalities in therapeutic and pharmacological applications. The canola meal PI purification steps involved: native PAGE and trypsin inhibition activity, followed by ammonium sulfate fractionation, anion exchange, gel filtration, and reverse-phase chromatography. The purified PI preparations were characterized using SDS-PAGE, isoelectric focusing (IEF), and N terminal sequencing. SDS-PAGE analysis of PI preparations under native reducing and nonreducing conditions revealed three polymorphic PIs in each genotype. The corresponding IEF of the genotype BLN-3347, exhibited three acidic isoforms with isoelectric points (pI) of 4.6, 4.0, and 3.9, while Rivette possessed three isoforms, exhibiting two basic forms of pI 8.65 and 9.9, and one acidic of pI 6.55. Purified PI preparations from both the genotypes displayed dipeptidyl peptidase-IV (DPP-IV) and angiotensin-converting enzyme (ACE) inhibition activities; the BLN-3347 PI preparation exhibited a strong inhibitory effect with lower IC₅₀ values (DPP-IV 37.42 µg/mL; ACE 129 µg/mL) than that from Rivette (DPP-IV 67.97 µg/mL; ACE 376.2 µg/mL). In addition to potential human therapy, these highly polymorphic PIs, which can inhibit damaging serine proteases secreted by canola plant pathogens, have the potential to be used by canola plant breeders to seek qualitative trait locus (QTLs) linked to genes conferring resistance to canola diseases.     

Mutation of two active-site residues converts a phosphatidylinositol-specific phospholipase C to a glucose phosphatase

Two mutations, R69D and K115E, converted a bacterial phosphatidylinositol-specific phospholipase C (PI-PLC) to a phosphatase with much higher specific activity toward glucose-6-phosphate than inositol-1-phosphate. PI-PLC single mutations R69D and K115E can cleave PI but lack any demonstrable phosphatase activity. The bacterial PI-PLC has no sequence homology with known glucose-6-phosphatase enzymes, which need His, Arg, and negatively charged residues (Asp or Glu) at the active site. The change in chemical reaction and substrate specificity can be rationalized by energy minimization of the mutant with I-1-P or G-6-P bound.     

Partially bio‐based aromatic polyimides derived from 2,5‐furandicarboxylic acid with high thermal and mechanical properties

Two novel bio‐based diamines are synthesized through introduction of renewable 2,5‐furandicarboxylic acid (2,5‐FDCA), and the corresponding aromatic polyimides (PIs) are then prepared by these diamines with commercially available aromatic dianhydrides via two‐step polycondensation. The partially bio‐based PIs possess high glass transition temperatures (T_gs) in the range from 266 to 364 °C, high thermal stability of 5% weight loss temperatures (T_5%s) over 420 °C in nitrogen and outstanding mechanical properties with tensile strengths of 79–138 MPa, tensile moduli of 2.5–5.4 GPa, and elongations at break of 3.0–12.3%. Some colorless PI films (PI‐1‐b and PI‐1‐c) with the transmittances at 450 nm over 85% are prepared. The overall properties of 2,5‐FDCA‐based PIs are comparable with petroleum‐based PI derived from isophthalic acid, displaying the potential for development of innovative bio‐based materials. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1058–1066     

Novel cardo-type heat-resistant polyimides bearing 9H-xanthene and polymer-based nanocomposite consisting of NH2-terminated TiO2: Synthetic strategies,extraction of methylene blue dye,and biological activities

In the present study, a series of cardo-type novel polyimides (PI)s containing xanthene groups was synthesized. All the polymers were amorphous in nature with inherent viscosities in the range of 0.72–0.91 dl/g. Study of thermal behavior showed that PIs have excellent thermal stability with 10% weight loss at temperatures (T_d10%) between 426 and 528 °C, glass transition-related temperatures (T_g) in the range of 292–305 °C, and weight residual at 700 °C ranged from 55% to 68% under N₂ atmosphere. Xanthene and fluorene presence, progressed the PIs solubility and also induced good biological activities. The in vitro anticancer activity of the 6FD-derived PI against the A431 (epidermoid carcinoma) cells showed an IC₅₀ value of 29.3 μM. In the next part of the work, a polymer-based composite (PI-B/m-TiO₂@HBP) was prepared by inscribing 20 wt% of hyperbranched polyamide-grafted TiO₂ nanoparticles into BTDA-derived PI-B matrix, and compared with the unfilled PI, its photoluminescence intensity and thermal stability properties were increased. The PI-B and nanocomposite exhibited good antibacterial activity against six bacterial strains. In the following, study of methylene blue (MB) dye adsorption from aqueous solution by the obtained PIs and PI-B/HBP@TiO₂ was carried out and removal efficiency values were found above 80.62%.     

Phosphatidylcholine Cation—Tyrosine π Complexes: Motifs for Membrane Binding by a Bacterial Phospholipase C

Phosphatidylinositol-specific phospholipase C (PI-PLC) enzymes are a virulence factor in many Gram-positive organisms. The specific activity of the Bacillus thuringiensis PI-PLC is significantly increased by adding phosphatidylcholine (PC) to vesicles composed of the substrate phosphatidylinositol, in part because the inclusion of PC reduces the apparent K_d for the vesicle binding by as much as 1000-fold when comparing PC-rich vesicles to PI vesicles. This review summarizes (i) the experimental work that localized a site on BtPI-PLC where PC is bound as a PC choline cation—Tyr-π complex and (ii) the computational work (including all-atom molecular dynamics simulations) that refined the original complex and found a second persistent PC cation—Tyr-π complex. Both complexes are critical for vesicle binding. These results have led to a model for PC functioning as an allosteric effector of the enzyme by altering the protein dynamics and stabilizing an ‘open’ active site conformation.     

Synthesis of soluble polyimides for vertical alignment of liquid crystal via one-step method

A series of polyimides (PIs) were copolymerized from 4-dodecyloxy-biphenyl-3′,5′-diaminobenzoate (DBPDA), 3,3′-dimethyl-4,4′-methylene-dianiline (DMMDA) and 4,4′-oxydi(phthalic anhydride) (ODPA) via one-step method. The PIs possessed excellent solubility in polar aprotic solvents and easily formed thin flexible films by solution casting. The glass-transition temperatures (T_gs) of the PIs were in the range of 219-242 °C and thermal decomposition temperatures in nitrogen occurred above 350 °C. The resultant PI films exhibited high transparency at wavelengths greater than 400 nm and induced excellent uniform vertical alignment of liquid crystal (LC). Even after the rubbing process, the pretilt angles of LC were still above 89°. The PI seems to be a prospective material for alignment layers in flexible displays.     

Synthesis of high‐refractive index polyimide containing selenophene unit

A highly refractive and transparent aromatic polyimide (PI) containing a selenophene unit has been developed. The PI was prepared by a two‐step polycondensation procedure from 2,5‐bis(4‐aminophenylenesulfanyl)selenophene (APSP) and 4,4′‐[p‐thiobis(phenylenesulfanyl)]diphthalic anhydride (3SDEA), and shows high thermal stabilities, such as a relatively high‐glass transition temperature of 189 °C and 5% weight loss temperature (T_5%) of 418 °C. The optical transmittance of the PI film at 450 nm is higher than 50%. The selenophene unit provides the PI with a refractive index of 1.7594, which is higher than corresponding PIs containing a thiophene or a phenyl unit because of the high polarizability per unit volume of the selenium atom. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4428–4434, 2009     

Synthesis and characterization of high nitrile content polyimides as dielectric films for electrical energy storage

Three new isomeric diamines containing three, oxy‐linked benzonitriles (3BCN), one of which is asymmetric (meta, para, or m, p), are synthesized in a 3‐step sequence. Polycondensation of these diamines and four common dianhydrides (6FDA, OPDA, BTDA, and PMDA) in N,N‐dimethylacetamide via poly(amic acid) precursors and thermal curing at temperatures up to 300 °C lead to three series of tough, creasable polyimide (PI) films (tensile moduli = 1.63 ? 2.86 GPa). Among these PIs, two PMDA‐based PIs possess relatively high crystallinity and two OPDA‐based PIs, low crystallinity, whereas all 6FDA‐ and BTDA‐based PIs, and m,m‐3BCN‐OPDA‐PI are amorphous, readily soluble in common polar aprotic solvents. Thermally stable and having high T_g (216 ? 341 °C), these PIs lose 5% weight around 493–503 °C in air and 463–492 °C in nitrogen. Dielectric properties have been evaluated by broadband dielectric spectroscopy (BDS) and electric displacement‐electric‐field (D‐E) loop measurements. D‐E loop results show an increase in high temperature permittivity (at 190 °C/1 kHz) from 2.9 (for parent PI CP2 with no nitrile group) to as high as 4.9 for these PIs, while keeping their dielectric loss relatively low. Thus, an increase in dipole moment density by the presence of three neighboring CN per repeat unit can increase the overall permittivity, which could be further enhanced by sub‐T_g mobility of para‐phenylene linkages (BDS results). Published 2014. J. Polym. Sci., Part A: Polym. Chem. 2014 J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 422–436     

Comparative study on polyimides from isomeric 3,3′‐, 3,4′‐, and 4,4′‐linked bis(thioether anhydride)s

Three isomeric bis(thioether anhydride) monomers, 4,4′‐bis(2,3‐dicarboxyphenylthio) diphenyl ketone dianhydride (3,3′‐PTPKDA), 4,4′‐bis(3,4‐dicarboxyphenylthio) diphenyl ketone dianhydride (4,4′‐PTPKDA), and 4‐(2,3‐dicarboxyphenylthio)‐4′‐(3,4‐dicarboxyphenylthio) diphenyl ketone dianhydride (3,4′‐PTPKDA), were prepared through multistep reactions. Their structures were determined via Fourier transform infrared, NMR, and elemental analysis. Three series of polyimides (PIs) were prepared from the obtained isomeric dianhydrides and aromatic diamines in N‐methyl‐2‐pyrrolidone (NMP) via the conventional two‐step method. The PIs showed excellent solubility in common organic solvents such as chloroform, N,N‐dimethylacetamide, and NMP. Their glass‐transition temperatures decreased according to the order of PIs on the basis of 3,3′‐PTPKDA, 3,4′‐PTPKDA, and 4,4′‐PTPKDA. The 5% weight loss temperatures (T_5%) of all PIs in nitrogen were observed at 504–519 °C. The rheological properties of isomeric PI resins based on 3,3′‐PTPKDA/4,4′‐oxydianiline/phthalic anhydride showed lower complex viscosity and better melt stability compared with the corresponding isomers from 4,4′‐ and 3,4′‐PTPKDA. In addition, the PI films based on three isomeric dianhydrides and 2,2′‐bis(trifluoromethyl)benzidine had a low moisture absorption of 0.27–0.35%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Phospholipase cleavage of D- and L-chiro-glycosylphosphoinositides asymmetrically incorporated into liposomal membranes

The nature of chiro-inositol-containing inositolphosphoglycans (IPGs), reported to be putative insulin mediators, was studied by examination of the substrate specificities of the phosphatidylinositol-specific phospholipase C (PI-PLC) and the glycosylphosphatidylinositol-specific phospholipase D (GPI-PLD) by using a series of synthetic D- and L-chiro-glycosylphosphoinositides. 3-O-alpha-D-Glucosaminyl- (3) and -galactosaminyl-2-phosphatidyl-L-chiro-inositol (4), which show the maximum stereochemical similarity to the 6-O-alpha-D-glucosaminylphosphatidylinositol pseudodisaccharide motifs of GPI anchors, were synthesized and asymmetrically incorporated into phospholipid bilayers in the form of large unilamellar vesicles (LUVs). Similarly, 2-O-alpha-D-glucosaminyl- (5) and -galactosaminyl-1-phosphatidyl-D-chiro-inositol (6), which differ from the corresponding pseudodisaccharide motif of the GPI anchors only in the axial orientation of the phosphatidyl moiety, were also synthesized and asymmetrically inserted into LUVs. The cleavage of these synthetic molecules in the liposomal constructs by PI-PLC from Bacillus cereus and by GPI-PLD from bovine serum was studied with the use of 6-O-alpha-D-glucosaminylphosphatidylinositol (7) and the conserved GPI anchor structure (8) as positive controls. Although PI-PLC cleaved 3 and 4 with about the same efficiency as 7 and 8, this enzyme did not accept 5 or 6. GPI-PLD accepted both the L-chiro- (3 and 4) and the D-chiro- (5 and 6) glycosylinositolphosphoinositides. Therefore, IPGs containing L-chiro-inositol only are expected to be released from chiro-inositol-containing GPIs if the cleavage is effected by a PI-PLC, whereas GPI-PLD cleavage could result in both L-chiro- and D-chiro-inositol-containing IPGs.     

稀土离子对肌醇磷脂囊泡的作用--结合、诱导聚集和促进水解

肌醇磷脂在细胞信号转导系统中起重要作用, 其水解反应是信号转导过程中的关键环节. 应用荧光淬灭滴定, 光散射以及高压液相技术, 研究了La3 和Tb3 对肌醇磷脂囊泡的作用, 包括结合常数的测定, 和对囊泡的诱导聚集作用以及促进肌醇磷脂水解的作用, 发现稀土离子与肌醇磷脂间具有较高的亲和力, 同时这种结合也诱导了肌醇磷脂囊泡的聚集和水解, 其程度与稀土离子和肌醇磷脂的结合常数有关.     

Synthesis and electrochromic properties of polybismaleimides containing triphenylamine units

The bismaleimide (BMI) monomer containing triphenylamine was prepared firstly. Then BMI was reacted with different diamines by Michael addition to obtain prepolymers, respectively. Finally, polyimides (PIs) were obtained through melting procedure. The effects of the structure of BMI moiety and thermal curing condition on thermal stability of PIs were studied by thermogravimetric analysis. PIs have excellent processing properties for film casting. Cyclic voltammetry of PI films was carried out on an indium-doped tin oxide-coated glass substrate. Results which exhibit two reversible oxidations at 0.71–0.78 and 1.06–1.16 V vs Ag/AgCl. The electrochromic performance was investigated by spectroelectrochemical methods. These anodically coloring polymer films not only showed good electrochromic properties but also exhibited high optical contrast ratio of transmittance with a color changing from yellow to green. After 100 cyclic switches, the polymer films still retained excellent redox and electrochromic activity.     

Performance of high-temperature thermosetting polyimide composites modified with thermoplastic polyimide

The preparation of polyimide (PI) resin with high heat resistance and toughness is a significant challenge. In this study, thermoplastic PI (TPI) was used to toughen thermosetting PIs, and toughened PI (TPI/PI) blends were prepared. The modified PI resin system exhibited good thermal stability, excellent heat resistance, and high toughness. The results indicated that the TPI/PI blends maintained the curing behavior and characteristics of the PI oligomer. The T_g of the cured TPI/PI blend exceeded 395 °C, and the T_5% values were in the range of 533–563 °C, suggesting excellent thermal stability and heat resistance. The maximum impact strength was increased by 46% compared with that of pure PI, indicating the excellent toughening effect of the TPI. Carbon fiber-reinforced PI composites were prepared using the toughening system as a matrix. The compression-after-impact values of the carbon fiber-reinforced PI composites were up to 190 MPa, indicating the excellent toughness of the materials.     

Prodrugs of HIV protease inhibitors-saquinavir, indinavir and nelfinavir-derived from diglycerides or amino acids: synthesis, stability and anti-HIV activity

With the aim of improving the pharmacological properties of current protease inhibitors (PIs), the synthesis of various acyl and carbamate amino acid- or diglyceride-containing prodrugs derived from saquinavir, indinavir and nelfinavir, their in vitro stability with respect to hydrolysis and their anti-HIV activity in CEM-SS and MT4 cells have been investigated. l-Leucine (Leu) and l-phenylalanine (Phe) were connected through their carboxyl to the PIs while l-tyrosine (Tyr) was conjugated through its aromatic hydroxyl via various spacer units. Hydrolysis of the prodrug with liberation of the active free drug was crucial for antiviral activity. The Leu- and Phe-PI prodrugs released the active free drug very rapidly (half-lives of hydrolysis in buffer at 37 degree C of 3-4 h). The Tyr-PI conjugates with a -C(O)(CH(2))(4)- linker exhibited half-lives in the 40-70 h range and antiviral activities in the 21-325 nM range (from 2 to 22 nM for the free PIs). The chemically very stable carbamate "peptidomimetic" Tyr-PI prodrugs (no hydrolysis detected after 7 days in buffer) displayed a very low anti-HIV activity or were even inactive (EC(50) from 2300 nM to >10 microM). A very low antiviral activity was measured for the diglyceride-substituted saquinavir and for all of the disubstituted indinavir and nelfinavir prodrugs. All these prodrugs probably released the active parent PI too slowly under the antiviral assay conditions. These results combined with those from transepithelial transport studies (Rouquayrol et al., Pharm. Res., 2002, 19, 1704-1712) indicate that conjugation of amino acids (through their carboxyl) to the PIs constitutes a most appealing alternative which could improve the intestinal absorption of the PIs and reduce their recognition by efflux carriers.     

Lipase from a Brazilian strain ofPenicillium citrinum

A lipases (glycerol ester hydrolases E. C. 3.1.1.3) from a brazilian strain ofPenicillium citrinum has been investigated. When the microorganism was cultured in the simple medium (1.0% olive oil and 0.5% yeast extract), using olive oil in as carbon source in the inocula, the enzyme extracted showed maximum activity (409 IU/mL). In addition, decrease of yeast extract concentration also reduces the lipase activity. Nevertheless, when yeast extract was replaced by ammonium sulfate, no activity was detected. Purification by precipitation with ammonium sulfate showed best activity in the 40–60% fraction. The optimum temperature for enzyme activity was found in the range of 34–37°C. However, after 30 min at 60°C, the enzyme was completely inactivated. The enzyme showed optimum at pH 8.0. The dried concentrated fraction (after dialysis and lyophilization) maintained its lipase activity at room temperature (28°C) for 8 mo. This result in lipase stability suggests an application of lipases fromP. citrinum in detergents and other products that require a high stability at room temperature.     

Effects of diamines and their fluorinated groups on the color lightness and preparation of organosoluble aromatic polyimides from 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]‐hexafluoropropane

To investigate the position and amount of the CF₃ group affecting the coloration of polyimides (PIs), we prepared 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]hexafluoropropane ( 2 ) with four CF₃ groups with 2‐chloro‐5‐nitrobenzotrifluoride and 2,2‐bis(4‐hydroxyphenol)hexafluoropropane. A series of soluble and light‐colored fluorinated PIs ( 5 ) were synthesized from 2 and various aromatic dianhydrides ( 3a – 3f ). 5a – 5f had inherent viscosities ranging from 0.80 to 1.19 dL/g and were soluble in amide polar solvents and even in less polar solvents. The glass‐transition temperatures of 5 were 221–265 °C, and the 10% weight‐loss temperatures were above 493 °C. Their films had cutoff wavelengths between 343 and 390 nm, b* values (a yellowness index) ranging from 5 to 41, dielectric constants of 2.68–3.01 (1 MHz), and moisture absorptions of 0.03–0.29 wt %. In a comparison of the PI series 6 – 8 based on 2,2‐bis[4‐(4‐aminophenoxy)phenyl]hexafluoropropane, 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]propane, and 2,2‐bis[4‐(4‐aminophenoxy)phenyl]propane, we found that the CF₃ group close to the imide group was more effective in lowering the color; this means that CF₃ of 5 , 7 , and 8f was more effective than that of 6c . The color intensity of the four PI series was lowered in the following order: 5 > 7 > 6 > 8 . The PI 5f , synthesized from diamine 2 and 4,4′‐hexafluoroisopropylidenediphthalic anhydride, had six CF₃ groups in a repeated segment, so it exhibited the lightest color among the four series. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 922–938, 2003     

Synthesis and Properties of a Novel Polyimide with Side Chain Containing Biphenyl Unit

A novel biphenyl side-chained diamine with alkyloxy spacer and alkyloxy tail,4'-butoxy-4-(3,5-diami-nobenzoyloxy)hexyloxybiphenyl(C6BBC4),was synthesized and characterized by FTIR and 1H NMR.A series o...