Effect of poly(amid–imide)/Al2O3 hybrid with various ratios on the physicochemical properties of poly(vinyl alcohol) nanocomposites films

To study the effect of the various ratios of poly(amide–imide)/Al₂O₃ nanocomposites (PANC)s on the mechanical and thermal properties of nanocomposites films, poly(vinyl alcohol) (PVA)/PANCs based on various ratios of 2, 4, and 6 wt% were prepared and characterized. In the first step, the surface of alumina nanoparticles was treated with 15 wt% of biosafe diacid and consequently, about 10 wt% of these modified nanoparticles were loaded into the poly(amide–imide) matrix. Then, various contents of the obtained PANCs were incorporated into a PVA solution using a sonochemical treatment. The effects of PANC on the structure and morphology of PVA matrix were studied using powder X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, atomic force microscopy (AFM), and thermal gravimetric analysis (TGA). The results show that the tensile strength and decomposition temperature were improved as the portion of PANC into PVA matrix are increased from 2 to 6 wt%. Also, AFM pictures of the fracture surfaces of PVA/PANCs showed a significantly rougher surface than the neat PVA.     

TiO2 nanoparticles/poly(butylene adipate‐co‐terephthalate) bionanocomposite films for packaging applications

In this present study, biodegradable PBAT nanocomposites containing different weight percentages (1, 3, 5, 7, and 10% w/w) of TiO₂ nanoparticles were prepared by using solvent casting technique, chloroform as a solvent. The microstructure and morphology of the as‐synthesized poly(butylene adipate‐co‐terephthalate) (PBAT)/TiO₂ nanocomposite films were characterized by Fourier‐transform infrared, X‐ray diffraction, scanning electron microscopy, and transmission electron microscope. The thermal degradation of PBAT composites was studied by using thermogravimetric analysis. The mechanical strength of the films was improved by increasing TiO₂ concentration. Tensile strength increased from 32.60 to 63.26 MPa, respectively. Barrier properties of the PBAT/TiO₂ nanocomposites were investigated by using an oxygen permeability tester. The oxygen permeability (oxygen transmission rate) decreased with increasing the TiO₂ nanoparticle concentrations. The PBAT/TiO₂ nanocomposite films showed profound antimicrobial activity against both Gram‐positive and Gram‐negative foodborne pathogenic bacteria, namely, Escherichia coli and Staphylococcus aureus, to understand to the zone of inhibition. These results indicated that filler–polymer interaction is important and the role of the TiO₂ as a reinforcement in the nanocomposites was evident. Copyright © 2017 John Wiley & Sons, Ltd.     

Polyethylene-based nanocomposite: Structure and properties of poly(vinyl alcohol)/organofunctionalized Mg-doped fluorapatite hybrid

We report here the production and characterization of polymer nanocomposites (NC)s containing nanoceramics of organofunctionalized Mg-doped fluorapatite (MDFA) in a poly(vinyl alcohol) matrix. First, the MDFA materials were functionalized with N-trimellitylimido-L-leucine modifier through ultrasonic irradiation. The numerous experimental techniques like Fourier transform infrared spectroscopy, X-ray diffraction, atomic force microscopy, field emission scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis were applied to characterize the prepared materials. Thermal analysis of the obtained NCs showed an increase in thermal stability of the NCs when compared to the neat macromolecule.     

Opportunities and Challenges in the Use of TiO2 Nanoparticles Modified with Citric Acid to Synthesize Advanced Nanocomposites Based on Poly(amide-imide) Containing N,N′-(Pyromellitoyl)-bis-L-leucine Segments

In this study, the goal was the preparation, characterization, and surface morphology of poly(amide-imide)/TiO₂-citric acid nanocomposites (PAI/TiO₂-CA NCs). Owing to the high surface energy and tendency for agglomeration, the surface of TiO₂ nanoparticles was modified with citric acid. Then poly(amide-imide) was synthesized by direct polycondensation reaction of N,N′-(pyromellitoyl)-bis-L-leucine diacid with 4,4′-diaminodiphenylmethane by triphenyl phosphite and tetra-n-butylammonium bromide as a green medium. The attained polymer and modified TiO₂ nanoparticles were used to prepare PAI/TiO₂-CA NCs through ultrasonic irradiation. The resulting PAI/TiO₂-CA NC was characterized with FT-IR spectroscopy, X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis.     

Morphology and thermal properties of polyhedral oligomeric silsesquioxane/polybutadiene nanocomposites prepared by anionic polymerization

The morphology and thermal properties of Allylisobutyl Polyhedral Oligomeric Silsesquioxane (POSS)/Polybutadiene (PB) nanocomposites prepared through anionic polymerization technique were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The results of XRD, SEM and TEM showed that the aggregation of POSS in PB matrix occurred obviously, forming crystalline domains and the size of POSS particles increased with increasing POSS content. The DSC and TGA results indicated that the glass transition temperature (T _g) of the nanocomposites was significantly increased and the maximum degradation temperature (T _dmax) of nanocomposites was slightly increased compared with pure PB, implying an increase in thermal stability.     

Assembly and characterization of Ag nanoparticles in PAM-g-PVA/PVP semi-interpenetrating network hydrogels

Polyacrylamide grafted poly(vinyl alcohol)/polyvinylpyrrolidone (PAM-g-PVA/PVP) semi-interpenetrating network (semi-IPN) hydrogels were designed and prepared via a simple free radical polymerization reaction process initiated by a PVA-(NH₄)₂Ce(NO₃)₆ redox system. The structure of the PAM-g-PVA/PVP semi-IPNs was characterized by a Fourier transform infrared spectroscopy. The morphologies of PAM-g-PVA/PVP hydrogels and PAM-g-PVA/PVP/Ag nanocomposite hydrogels were examined by scanning electron microscopy and transmission electron microscopy (TEM). The experimental results indicated that the PAM, PVA or PVP chains can efficiently act as stabilizing agents for Ag nanoparticles. TEM investigation of sample morphology showed the presence of nearly spherical-, square- or rectangular-shaped Ag nanoparticles with diameters ranging from 10 to 60 nm. The characteristic surface plasmon resonance band appeared at 390–400 run as a result of the immobilization of Ag nanoparticles within the hydrogel matrices. The self-assembly of Ag nanoparticles and the swelling behavior of the resulting nanocomposites can be controlled and modulated by altering the mole fraction of PVP in the PAM-g-PVA/PVP semi-IPNs.     

Facile and green methodology for surface‐grafted Al2O3 nanoparticles with biocompatible molecules: preparation of the poly(vinyl alcohol)@poly(vinyl pyrrolidone) nanocomposites

The present work describes preparation of modified alumina with biocompatible, water soluble, and treating agents such as citric acid and ascorbic acid. Also, the influence of the modified nanoparticles (NPs) into the blend of poly(vinyl alcohol)@poly(vinyl pyrrolidone) (50/50) matrix was studied. At first, citric acid and ascorbic acid as environmental friendly agents were grafted on the surface of Al₂O₃ NPs. Then, nanocomposites (NCs) with different amounts of modified Al₂O₃ NPs were prepared via a simple ultrasonic method. The characterizations of the molecular structure of the NCs specified that chemical and physical interactions happened between inorganic and organic counterparts. The mutual effect of modified NPs into the polymer matrix was investigated on the structural, interfacial interaction, thermal stability, and optical properties. The results from morphological characterization confirmed changes in morphology of poly(vinyl alcohol) and poly(vinyl pyrrolidone) after loading NPs. Uniform dispersion of modified spherical Al₂O₃ NPs powders into the matrix of 50/50 polymers was detected by field emission scanning electron microscopy and energy‐dispersive X‐ray. Adding M‐NPs into the polymer matrix expressively improved the thermal stability of NCs. Peaks in ultraviolet–visible spectra were shifted to the higher absorption. Copyright © 2017 John Wiley & Sons, Ltd.     

Unusual Extensional Rheology and Dispersion Behavior of High Impact Polystyrene/TiO2 Nanocomposites Prepared by Melt‐Compounding

The extensional rheology and dispersion behavior of high impact polystyrene (HIPS) and HIPS/TiO₂ nanocomposites prepared by melt‐compounding were investigated. The influence of ethylene‐vinyl acetate (EVA) copolymer on the extensional rheology of HIPS/TiO₂ masterbatches was also researched. The rheological experiments investigated with Rosand Presicion Rheometer confirmed that the HIPS/TiO₂ masterbatches, the HIPS/EVA/TiO₂ masterbatches and the HIPS/TiO₂ nanocomposites with low TiO₂ loading shown different extensional rheology in comparison to the pure HIPS. Field‐emission scanning electron microscopy (FE‐SEM) shown the dispersion morphology of TiO₂ nanoparticles in HIPS based nanocomposites and indicated the influence of TiO₂ dispersion behavior on the unusual extensional rheology of HIPS nanocomposites.     

Preparation and properties of optically active polyurethane/TiO2 nanocomposites derived from optically pure 1,1′-binaphthyl

In this study, optically active polyurethanes (PU) were prepared from chiral 1,1′-binaphthyl (BINOL) and 2,4-toluene diisocyanate (TDI) by the simple hydrogen transfer addition reaction and the high-intensity ultrasonic was applied to the preparation of polyurethane/TiO₂ nanocomposites. The (R)-BPU and (S)-BPU were analyzed by ¹H NMR, FT-IR spectroscopy, thermogravimetric analysis (TGA), UV-vis spectroscopy and circular dichroism (CD) spectra. The results indicated that the polymers exhibited stronger CD signals with positive and negative Cotton effect in their CD spectra. Meanwhile, the nanocomposites were characterized by IR, powder X-ray diffraction, transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The results manifested the improvement of heat stability of the nanocomposites with the presence of TiO₂ nanoparticles. As a result, the infrared emissivity (8-14 μm) study revealed that the nanocomposites possessed much lower infrared values compared with those of the neat polymers and nanoparticles, respectively.     

Transparent poly(methyl methacrylate)/TiO<Subscript>2</Subscript> nanocomposites for UV-shielding applications

Transparent poly(methyl methacrylate) (PMMA)/TiO₂ nanocomposites have been prepared by solution mixing PMMA with organically soluble titania xerogel. The organically soluble titania xerogel in the form of amorphous phase has been synthesized via a simple sol-gel method, involving hydrolysis of tetrabutyl titanate (TBT) in trifluoroacetic acid (TFA) and gelation. The obtained PMMA/TiO₂ nanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), transmission electron microscope (TEM), thermogravimetry (TG) and ultraviolet-visible (UV-vis) absorption spectroscopy. The results showed that the interaction between titania nanoparticles and PMMA macromolecular chains led to a homogeneous dispersion of TiO₂ in PMMA matrix. The resulting PMMA/TiO₂ nanocomposites showed improved thermal stability, high transparency and high UV-shielding efficiency with a small amount of titania xerogel (≤3.0 wt %). The present work is of interest for developing a series of transparent UV-shielding nanocomposites.     

Preparation and characterization of ternary composite films of polyvinyl alcohol/sodium alginate/TiO<Subscript>2</Subscript>

Nano-TiO₂ with anionic surface active agent sodium dodecylsulfate (SDS) modified, the poly(vinyl alcohol)/sodium alginate/TiO₂ composite films were prepared by method of solution blending representing. The structure of the films was analyzed by XRD and SEM. In addition, air permeability rate, swelling ratio, light transmittance, mechanical properties, and antibacterial properties were tested. The results showed that in compound membrane there was a strong force between poly(vinyl alcohol)/sodium alginate and TiO₂ particles, indicating that there was good compatibility between the sodium alginate and the poly(vinyl alcohol). The mixed membranes were of good water resistance, tensile strength, and closure. When the titanium dioxide content increased appropriately, they had very good mechanical properties. In addition, the antibacterial properties of composite membrane gradually increased with the increase in the TiO₂content.     

聚乙烯醇/氟基蒙脱土纳米复合材料的合成及性能研究

采用水热方法,在493 K条件下反应72小时,合成了氟基蒙脱土(F-MMT),在这种F-MMT中,硅酸盐结构中的一些OH-被F-取代。采用溶液插层方法,制备了聚乙烯醇/F-MMT纳米复合材料(PVA/F-MMT)。采用X 射线衍射、扫描电镜和透射电镜对F-MMT 和 PVA/F-MMT纳米复合材料进行了表征;结果表明,片状结构的F-MMT均匀分散于PVA中,形成了层离结构的纳米复合材料。热重分析、力学性能和紫外可见光谱的测试结果表明,在没有牺牲光学性能情况下,PVA/F-MMT纳米复合材料的热稳定性和力学性能都得到了提高。力学和热学性能的提高归功于F-MMT均匀而好的分散于聚合物基体中,以及PVA中的 OH- 和F-MMT 中F-之间强的氢键作用。     

Molybdenum disulfide-polymer nanocomposite structures with different sequences of alternating inorganic and organic layers

The reactions of charge-transfer-activated molybdenum disulfide with polymers (polyethylene glycol, poly(ethylene oxide), poly(vinyl alcohol), and polyhexamethylene guanidine hydrochloride) produce nanocomposite compounds, the composition and structure of which are determined by the nature of activated MoS₂. In nanocomposites prepared in single-layer dispersions of molybdenum disulfide, the layers of inorganic and organic components regularly alternate. In nanocomposites, formed by the intercalation of the polymers into particles of nanocrystalline MoS₂, the polymeric molecules are accomodated within spaces between the layers of the inorganic matrix, resulting in the formation of microheterogeneous systems. The structures of these nanocomposite compounds were proposed based on the X-ray powder diffraction and electron microscopy data.     

Fabrication and characterization of a novel TiO2 nanoparticle self-assembly membrane with improved fouling resistance

A novel TiO₂ nanoparticle self-assembly membrane was prepared based on ultrahigh molecular weight poly(styrene-alt-maleic anhydride)/poly(vinylidene fluoride) (SMA/PVDF) blend membrane. TiO₂ nanoparticle solution was beforehand prepared via the controlled hydrolysis of titanium tetraisopropoxide. The diameter (10 nm or less) and anatase crystal structure were analyzed using transmission electron microscopy (TEM) and X-ray diffraction (XRD). The SMA/PVDF blend membranes prepared by the phase inversion method were immersed into the TiO₂ nanoparticle solution for a week to produce TiO₂ self-assembly membranes. The chemical compositions in membrane surface were analyzed by X-ray photoelectron spectroscopy (XPS). The membrane morphologies were measured by scanning electron microscopy (SEM). Finally, the membrane hydrophilicity, protein anti-fouling property and the molecular weight cutoff (MWCO) were characterized by water contact angle measurement, static protein absorption and filtration experiments, respectively. It is demonstrated that, in comparison to PVDF/SMA blend membrane, the permeability and anti-fouling ability of TiO₂ self-assembly membranes were significantly improved.     

Electrochemical application of titanium dioxide nanoparticle/gold nanoparticle/multiwalled carbon nanotube nanocomposites for nonenzymatic detection of ascorbic acid

Titanium dioxide nanoparticle/gold nanoparticle/carbon nanotube (TiO₂/Au/CNT) nanocomposites were synthesized, and then characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy (EDX). A TiO₂/Au/CNT nanocomposite-modified glassy carbon (GC) electrode was prepared using the drop coating method and was investigated using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), differential pulse voltammetry (DPV), and amperometric current–time response (I-T). The modified material is redox-active. The nonenzymatically detected amount of ascorbic acid (AA) on the TiO₂/Au/CNT electrode showed a linear relationship with the AA concentration, for concentrations from 0.01 to 0.08 μM; the sensitivity was 117,776.36 μA?·?cm^?2?·?(mM)^?1, and the detection limit was 0.01 μM (S/N?=?3). The results indicated that the TiO₂/Au/CNT nanocomposite-modified GC electrode exhibited high electrocatalytic activity toward AA. This paper describes materials consisting of a network of TiO₂, Au, and MWCNTs, and the investigation of their synergistic effects in the detection of AA.     

TiO<Subscript>2</Subscript> nanofibers embedding single crystalline TiO<Subscript>2</Subscript> nanowires

Epitaxially grown titanium dioxide (TiO₂) nanofibers embedding single crystalline TiO₂ nanowires (NWs) were successfully fabricated by electropinning poly(vinyl pyrrolidone)/ethanol solutions mixed with hydrothermally synthesized TiO₂ NWs and titanium isopropoxide precursors and subsequently calcinating the electrospun nanofibers. Utilizing scanning electron microscopy (SEM) and transmission electron microscopy (TEM), the morphologies of TiO₂ NWs and nanofibers were investigated. High resolution TEM (HR-TEM) and selected area electron diffraction (SAED) allowed us to indentify the fact that, during the calcination process under the optimized condition, titanium isopropoxide precursors were epitaxially crystallized on the surface of single crystalline TiO₂ NWs. Based on the X-ray diffraction (XRD) experiments, it was also realized that the crystalline structure of hydrothermally synthesized TiO₂ NWs and epitaxially crystallized TiO₂ nanofibers is anatase and that TiO₂ composite nanofibers embedding TiO₂ NWs exhibited a higher crystallinity than the pristine TiO₂ nanofibers. Additionally, ultraviolet visible (UV–Vis) spectra of nanofibers indicated that optical properties of TiO₂ nanofibers can be tuned by introducing the single crystalline TiO₂ NWs.     

Nucleation Activation and Spherical Crystals Morphology of LLDPE/LDPE/TiO2 Nanocomposites Prepared by Non-Isothermal Crystallization

The nucleation activation of TiO₂ nanoparticles in the linear low-density polyethylene (LLDPE)/low-density polyethylene (LDPE)/TiO₂ nanocomposites prepared by non-isothermal crystallization, the spherical crystals morphology of the etched LLDPE/LDPE and LLDPE/LDPE/TiO₂ composites were investigated by differential scanning calorimetry (DSC) and field-emission scanning electron microscopy (FE-SEM), respectively. The results showed that the heterogeneous nucleation activation of TiO₂ nanoparticles was accelerated by the fast cooling rate. The spherical crystals in the LLDPE/LDPE and LLDPE/LDPE/TiO₂ composites were ascribed to the same crystal structure. It was worth to note that there was distinct difference between the morphology of the cocrystallization LLDPE/LDPE crystals and that of the independent crystallization LLDPE/LDPE crystals.     

Application of CuO nanoparticles modified with vitamin B1 for the production of poly(vinyl alcohol)/CuO nanocomposite films with enhanced optical,thermal and mechanical properties

In this Investigation, the CuO nanoparticles (NPs) were treated by vitamin B₁ as a biomolecule modifier. The CuO NPs were used as an appropriate filler for fabrication of poly(vinyl alcohol) (PVA) nanocomposites (NCs). Then, NCs with various ratios (3, 5, and 7wt%) of modified CuO were fabricated under ultrasonic irradiation and their properties were compared with pure PVA. Several techniques were used for characterization of NCs. Field emission scanning electron microscopy and transmission electron microscopy analysis indicated that NPs have proper compatibility with the PVA matrix. Thermal gravimetric analysis results confirmed that NCs displayed higher thermal stability than neat PVA. Also, the addition of the NPs into the PVA matrix improved the optical and mechanical behaviors. Finally, the contact angle measurements verified that the hydrophilicity decreased for different ratios of modified NPs loaded in the polymer matrix. Copyright © 2017 John Wiley & Sons, Ltd.     

Effect of surfactant on electrokinetic properties of polyindole/TiO2-conducting nanocomposites in aqueous and nonaqueous media

In this study, polyindole (PIN)/TiO₂ nanocomposites were synthesized with and without the presence of sodium dodecylsulfate, anionic surfactant, with two different PIN contents. The synthesized materials were subjected to various characterizations namely: particle size, apparent density, conductivity, dielectric constants, magnetic susceptibility, elemental analysis, Fourier transform infrared spectroscopy spectroscopy, thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Characterization results revealed the successful preparations of PIN/TiO₂ hybrid nanocomposites. Electrokinetic properties of all the materials were determined by zeta (ζ)-potential measurements in aqueous and nonqueous media. Effects of pH, temperature, presence of various electrolytes, and surfactants on electrokinetic properties of the materials were examined.     

Preparation and Characterization of Room-temperature Ferromagnetic Ni-doped TiO2 Nanobelts

Ni-doped anatase TiO₂ nanobelts (NBs) with different Ni²⁺ contents were simply prepared by combining ion-exchange with hydrothermal treatment. They were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR), and magnetic measurement techniques. The results showed that Ni²⁺ cations doped into the TiO₂ lattice and no metallic nickel clusters or nanoparticles could be found. The magnetic results demonstrated that the prepared Ni-doped TiO₂ samples had complex magnetic mechanism including room-temperature ferromagnetic and paramagnetic behaviors, and with the increase of Ni²⁺ content, the magnetization also increased under the same applied field owing to uniform distribution of Ni²⁺ ions in TiO₂ nanobelts.