新的胺膦钌配合物的合成及在氢转移氢化反应中的应用

合成了两个新的胺膦钌配合物ｔｒａｎｓ－ＲｕＣｌ２（Ｐ２Ｎ２Ｍｅ）和ｔｒａｎｓ－ＲｕＣｌ２（Ｐ２Ｎ２Ｈ４Ｍｅ）．进行了元素分析、ＩＲ、ＮＭＲ等谱学或Ｘ射线衍射分析．它们均具有六配位八面体构型．在碱性介质中，以异丙醇为溶剂，两个配合物可作为有效的催化剂实现苯乙酮的氢转移还原．讨论了催化氢化机理．     

双膦配合物Ru（OAc）2（Ph3P）（dppe）和Ru（OAc）2（dppe）2的设计合成,表…

Ｒｕ（ＯＡｃ）２（Ｐｈ３Ｐ）２和１或２摩尔的双－（二苯基膦）乙烷（ｄｐｐｅ）在回流的甲苯中反应，分别生成双膦配位的Ｒｕ（ＯＡｃ）２（Ｐｈ３Ｐ）（ｄｐｐｅ）和Ｒｕ（ＯＡｃ）２（ｄｐｐｅ）２。并进行了元素分析、ＩＲ、ＮＭＲ等谱学表征。在温度－５０至４０℃的范围内，测定了Ｒｕ（ＯＡｃ）２（Ｐｈ３Ｐ）（ｄｐｐｅ）的＾３１Ｐ｛＾１Ｈ｝ＮＭＲ谱，讨论了配合物中膦配体的配位状态。在反应温度３０至９０℃、氢压１．     

多齿胺膦钌配合物催化苯乙酮的氢转移氢化

利用Ｃ２－对称的双胺双膦钌（Ⅱ）配合物ＲｕＣｌ２（Ｐ２Ｎ２Ｈ４）为催化剂，研究了苯乙酮的氢转移还原反应。在苯乙酮、钌配合物和异丙氧基钾的摩尔比为２００：１：１２的条件下，于６５℃反应２ｈ后，苯乙酮的转化率高达９９％。讨论了苯乙酮的氢转移氢化机理。     

多齿双亚胺双膦配位的钌络合物的制备和氢化性能

等摩尔的Ｒｕ（ＯＡｃ）２（Ｐｈ３Ｐ）２和Ｎ，Ｎ＇－双－［邻－（二苯基膦）苯亚甲基］乙二胺（简称Ｐ２Ｎ２）在回流的二氯甲烷或甲苯中反应，分别生成两个新型四齿胺膦配位的钌络合物Ｒｕ（ＯＡｃ）２Ｐ２Ｎ２．２Ｈ２Ｏ和反应式－ＲｕＣｌ２Ｐ２Ｎ２．２Ｈ２Ｏ．对两个络合物进行了元素，ＩＲ和ＮＭＲ表征。在氢压１．０至８．０ＭＰａ和反应温度３０至１５０℃的范围内，研究了它们催化α，β－不饱和酸的氢化性能。结果表明。     

双膦配合物Ru（OAc）_2（Ph_3P）（dppe）和Ru（OAc）_2（dppe）_2的设计合成、表征和氢化性能

Ｒｕ（ＯＡｃ）_２（Ｐｈ_３Ｐ）_２和１或２摩尔的双－（二苯基膦）乙烷（ｄｐｐｅ）在回流的甲苯中反应，分别生成双膦配位的Ｒｕ（ＯＡｃ）_２（Ｐｈ_３Ｐ）（ｄｐｐｅ）和Ｒｕ（ＯＡｃ）_２（ｄｐｐｅ）_２。并进行了元素分析、ＩＲ、ＮＭＲ等谱学表征。在温度－５０至４０℃的范围内，测定了Ｒｕ（ＯＡｃ）_２（Ｐｈ_３Ｐ）（ｄｐｐｅ）的￣（３１）Ｐ｛￣１Ｈ｝ＮＭＲ谱，讨论了配合物中膦配体的配位状态。在反应温度３０至９０℃、氢压１．０至５．０ＭＰａ的条件下，考察了两个配合物均相催化丙烯酸和苯乙烯的氢化性能。结果表明，题示的两个配合物是催化丙烯酸和苯乙烯氢化的有效催化剂。     

两相体系中钌膦配合物催化4—苯基—3—丁烯—2—酮加氢反应的研究

研究了水和有机物组成的两相催化体系中,由ＲｕＣｌ３－ＴＰＰＴＳ（ＴＰＰＴＳ：Ｐ（ｍ－Ｃ６Ｈ４ＳＯ３Ｎａ）３）原位反应生成的催化活性物种对４－苯基－３－丁烯－２－酮（又名苄叉丙酮）的催化加氢反应．考察了钌浓度（１．０×１０－３～６．０×１０－３ｍｏｌ／Ｌ）、氢压（１．０～６．０ＭＰａ）、反应温度（３０～７０℃）、配体浓度（１．２～７．２×１０－２ｍｏｌ／Ｌ）、阳离子表面活性剂（ＣＴＡＢ：十六烷基三甲基溴化铵）及反应时间等对加氢反应活性和选择性的影响,并与以配合物ＲｕＣｌ２（ＴＰＰＴＳ）３为催化剂前体生成的催化活性物种对加氢反应的活性及选择性进行了比较．结果表明,分别由配合物ＲｕＣｌ２（ＴＰＰＴＳ）３及ＲｕＣｌ３－ＴＰＰＴＳ原位反应生成的催化活性物种,都只催化４－苯基－３－丁烯－２－酮的Ｃ＝Ｃ键选择加氢．由配合物ＲｕＣｌ２（ＴＰＰＴＳ）３形成的催化体系的加氢活性及选择性均优于ＲｕＣｌ３－ＴＰＰＴＳ原位反应生成的催化活性物种．阳离子表面活性剂的加入,使加氢反应活性下降,选择性略有提高     

两相催化体系中α，β－不饱和醛的选择性加氢反应研究Ⅰ．水溶性钌－膦配合物催化肉桂醛的加氢性能

本文研究了两种水溶性钌－膦配合物ＲｕＣｌ_２（ＴＰＰＴＳ）_３和Ｒｕｃｌ_２（ＣＯ）_２（ＴＰＰＴＳ）_２［ＴＰＰＴＳ为：Ｐ（ｍ－Ｃ_６Ｈ_４ＳＯ_３Ｎａ）_３］的合成，在水相和有机相组成的两相催化体系中，考察了它们衍生出的活性物种和以ＲｕＣｌ３－ＴＰＰＴＳ原位合成的活性物种对肉桂醛的选择加氢性能，并对反应温度（２０—８０℃），氢压（２—６ＭＰａ），催化剂浓度（１．１２×１０~（－３）～４．５０×１０~（－３）ｍｏｌ／Ｌ），配体ＴＰＰＴＳ浓度（９．０×１０~（－３）～５．４×１０~（－２）ｍｏｌ／Ｌ），表面活性剂浓度和反应时间的变化对选择加氢反应的影响进行了详细研究。实验结果表明，ＲｕＣｌ_３－ＴＰＰＴＳ原位合成配合物的催化加氢活性最高，而在金属Ｒｕ上羰基的配位将使加氢活性降低，表面活性剂ＣＴＡＢ是有效的促进剂，它的加入可大大提高加氢活性，选择适当的ＣＴＡＢ浓度，在反应结束后水相与有机相分层迅速，有利于Ｒｕ催化剂的分离，在所考察的反应条件下，肉桂醛选择加氢生成肉桂醇的转化率大于８０％，选择性达９６％以上。     

5—（5—硝基—2—吡啶偶氮）—2,4—二氨基甲苯与钌的显色反应及其应用

报道以５－（５－硝基－２－吡啶偶氮）－２，４－二氨基甲苯（５－ＮＯ２－ＰＡＤＡＴ＿作为测定钌的分光光度法。在４０％乙醇存在下ＰＨ４．０－６．５乙酸－乙酸钠缓冲溶液中５－ＮＯ２－ＰＡＤＡＴ与Ｒｕ（Ⅱ）形成稳定的红色络合物。该络合物的无机酸作用下，可转变为另一型人有较高吸收特性的络合物，适宜酸度范围分别为０．１２－２．０ｍｏｌ／ＬＨＣｌ，０．１２－１．２ｍｏｌ／ＬＨＣｌＯ４，０．１２－１．０ｍｏｌ／Ｌ     

联氨在d—过渡金属配合物的MTP（о—NO2）TBP修饰石墨电…

研究了Ｎ２Ｈ４在间－四（邻－硝基苯基）四苯并卟啉铁（Ⅲ）、钴（Ⅱ）、锌（Ⅱ）和镍（Ⅱ）配合物［ＭＴＰ（о－ＮＯ２）ＴＢＰ，简称ＭＴＢＰ］修饰石墨电极上的催化电氧化反应，测得该系列金属四苯并卟啉的催化活性的顺序为Ｃｏ（Ⅱ）ＴＢＰ＞ＣｌＦｅ（Ⅲ）ＴＢＰ＞Ｎｉ（Ⅱ）ＴＢＰ＞Ｚｎ（Ⅱ）ＴＢＰ≈石墨，考察了Ｃｏ（Ⅱ）ＴＢＰ和ＣｌＦｅ（Ⅲ）ＴＢＰ催化联氨电氧化反应的动力学过程。结果表明，ＯＨ＾－和Ｎ２Ｈ４在Ｃ     

两个异亚砂基乙酰丙酮—N—芳基亚胺Pd（Ⅱ）配合物的合成 …

合成了两个异亚硝基乙酰丙酮－Ｎ－芳基亚胺的Ｐｄ（Ⅱ）配合物,ＰｄＣｌ（Ｃ６Ｈ５－ＩＡＩ）（Ｃ６Ｈ５ＮＨ２）（１）和ＰｄＣｌ（ｐ－ＣＨ３Ｃ６Ｈ４－ＩＡＩ）（ｐ－ＣＨ３Ｃ６Ｈ４ＮＨ２）（２）,并测定了配合物１的晶体结构。配合物１晶体属正交晶系,空间群为Ｐｃａ２１,晶胞参数ａ＝１．８５８７（４）ｎｍ,ｂ＝０．９３８０（２）ｎｍ,ｃ＝２．１２３７（４）ｎｍ,Ｚ＝８,Ｆ（０００）＝１７６０,μ＝１．１６０ｍ     

Sc2MgGa2 and Y2MgGa2

Scandium magnesium gallide, Sc₂MgGa₂, and yttrium magnesium gallide, Y₂MgGa₂, were synthesized from the corresponding elements by heating under an argon atmosphere in an induction furnace. These intermetallic compounds crystallize in the tetragonal Mo₂FeB₂‐type structure. All three crystallographically unique atoms occupy special positions and the site symmetries of (Sc/Y, Ga) and Mg are m2m and 4/m, respectively. The coordinations around Sc/Y, Mg and Ga are pentagonal (Sc/Y), tetragonal (Mg) and triangular (Ga) prisms, with four (Mg) or three (Ga) additional capping atoms leading to the coordination numbers [10], [8+4] and [6+3], respectively. The crystal structure of Sc₂MgGa₂ was determined from single‐crystal diffraction intensities and the isostructural Y₂MgGa₂ was identified from powder diffraction data.     

Zur Kenntnis der Dialkalimetalldichalkogenide β-Na2S2, K2S2, α-Rb2S2, β-Rb2S2, K2Se2, Rb2Se2, α-K2Te2, β-K2Te2 und Rb2Te2

On Dialkali Metal Dichalcogenides β-Na₂S₂, K₂S₂, α-Rb₂S₂, β-Rb₂S₂, K₂Se₂, Rb₂Se₂, α-K₂Te₂, β-K₂Te₂ and Rb₂Te₂ The first presentation of pure samples of α- and β-Rb₂S₂, α- and β-K₂Te₂, and Rb₂Te₂ is described. Using single crystals of K₂S₂ and K₂Se₂, received by ammonothermal synthesis, the structure of the Na₂O₂ type and by using single crystals of β-Na₂S₂ and β-K₂Te₂ the Li₂O₂ type structure will be refined. By combined investigations with temperature-dependent Guinier-, neutron diffraction-, thermal analysis, and Raman-spectroscopy the nature of the monotropic phase transition from the Na₂O₂ type to the Li₂O₂ type will be explained by means of the examples α-/β-Na₂S₂ and α-/β-K₂Te₂. A further case of dimorphic condition as well as the monotropic phase transition of α- and β-Rb₂S₂ is presented. The existing areas of the structure fields of the dialkali metal dichalcogenides are limited by the model of the polar covalence.     

Crystal Structures of [Bu2Sn(O2PPh2)2], [Ph2Sn(O2PPh2)2], and [PhClSn(O2PPh2)OMe]2. Raman Spectra of [Ph2Sn(O2PPh2)2] and [PhClSn(O2PPh2)OMe]2

[(n‐Bu)₂Sn(O₂PPh₂)₂] ( 1 ), and [Ph₂Sn(O₂PPh₂)₂] ( 2 ) have been synthesized by the reactions of R₂SnCl₂ (R=n‐Bu, Ph) with HO₂PPh₂ in Methanol. From the reaction of Ph₂SnCl₂ with diphenylphosphinic acid a third product [PhClSn(O₂PPh₂)OMe]₂ ( 3 ) could be isolated. X‐ray diffraction studies show 1 to crystallize in the monoclinic space group P2₁/c with a = 1303.7(1) pm, b = 2286.9(2) pm, c = 1063.1(1) pm, β = 94.383(6)°, and Z = 4. 2 crystallizes triclinic in the space group , the cell parameters being a = 1293.2(2) pm, b = 1478.5(4) pm, c = 1507.2(3) pm, α = 98.86(3)°, β = 109.63(2)°, γ = 114.88(2)°, and Z = 2. Both compounds form arrays of eight‐membered rings (SnOPO)₂ linked at the tin atoms to form chains of infinite length. The dimer 3 consists of a like ring, in which the tin atoms are bridged by methoxo groups. It crystallizes triclinic in space group with a = 946.4(1) pm, b = 963.7(1) pm, c = 1174.2(1) pm, α = 82.495(6)°, β = 66.451(6)°, γ = 74.922(6)°, and Z = 1 for the dimer. The Raman spectra of 2 and 3 are given and discussed.     

Electrochemical study of (NEt4)2Cl2FeS2MoS2 and (NEt4)2Cl2FeS2MoS2FeCl2

Summary The ability of [MoS₄]^2–, anions to be used as ligands for transition metal ions has been widely demonstrated, especially with Fe²⁺. The present study has been restricted to linear complexes such as (NEt₄)₂ [Cl₂FeS₂MoS₂] and (NEt₄)₂[Cl₂FeS₂MoS₂FeCl₂]. Their electrochemical properties are described: upon electrochemical reduction, these compounds yield MoS₂, as a black precipitate, and an iron complex in solution, assumed to be [SFeCl₂]^2–. The electrochemical reduction goes through two electron transfers, coupled with the breakdown of the molecular skeleton: a DISPl and an ECE mechanism. Depending on the solvent, the following equilibrium may be observed: [Cl₄Fe₂MoS₄]^2–[Cl₂FeMoS₄]^2–+FeCl₂. The equilibrium constant, K_D, was evaluated by differential pulse polarography. K_D is tightly related to the donor number of the solvent.     

The alkali hypophosphites KH2PO2, RbH2PO2 and CsH2PO2

The structures of the hypophosphites KH₂PO₂ (potassium hypophosphite), RbH₂PO₂ (rubidium hypophosphite) and CsH₂PO₂ (caesium hypophosphite) have been determined by single‐crystal X‐ray diffraction. The structures consist of layers of alkali cations and hypophosphite anions, with the latter bridging four cations within the same layer. The Rb and Cs hypophosphites are isomorphous.     

Syntheses,Spectroscopic Studies,and Crystal Structures of Me2Sn(O2PPh2)2, Ph2Pb(O2PMe2)2, and Ph2Pb(O2PPh2)2

Me₂Sn(O₂PPh₂)₂ ( 1 ), Ph₂Pb(O₂PMe₂)₂ ( 2 ), and Ph₂Pb(O₂PPh₂)₂ ( 3 ) have been synthesized by the reactions of Me₂SnCl₂ or Ph₃PbCl with the corresponding diorganophosphinic acid in methanol. X‐ray diffraction studies show that the diorganophosphinate groups behave as double bridges between the metal atoms leading to polymeric ring‐chain structures with M₂O₄P₂ (M = Pb, Sn) eight‐membered rings. The organic groups bonded to the metal atoms are in trans‐position in the resulting octahedral arrangement around the metal atoms. The IR and the mass spectra were reported and discussed.     

Thermal decomposition of Me3SnO2PCl2, Me2Sn(O2PCl2)2 and Ph3SnO2PCl2

TG and DTA studies on Me₃SnO₂PCl₂, Me₂Sn(O₂PCl₂)₂ and Ph₃SnO₂PCl₂ were carried out under dynamic argon atmosphere. The results show that the decomposition proceeds in different stages leading to the formation of Sn₃(PO₄)₂ as a stable product. This compound was characterized by IR spectroscopy. Decomposition schemes involving reductive elimination reactions were proposed.