功能化磁性纳米粒子在乳状液制备及破乳中的应用及作用机制

功能化磁性纳米粒子因其独特的理化性质,在乳状液制备与破乳领域的应用受到广泛关注。本文归纳了功能化磁性纳米粒子的制备方法、合成结构与特征性质,阐述了其在乳状液制备及破乳中的应用过程,重点分析了磁性纳米粒子在溶液中良好分散、稳定吸附于油水界面排布为膜结构的作用行为,尤其是磁性纳米粒子的磁响应特征对乳状液中界面性质、液滴形貌及运动状态的影响,并进一步总结出其表面性质及作用行为对稳定乳状液或使乳状液破乳的规律。针对磁性纳米粒子对乳状液稳定性影响规律的探究可为其在应用领域提供理论支持。最后本文就功能化磁性纳米粒子研究中亟待解决的新问题作出展望。     

乳状液法制备憎液溶胶Ⅰ.BaCO_3均匀粒子的制备

均匀胶体粒子的形成，除与反应条件（反应物浓度、陈化时间和温度、介质种类等）有关外，反应体系的环境也影响最终产物的形态，《至结晶结构．气溶胶法和微乳液法正是利用微环境中的‘水池效应”；分别制备出球形亚微米和纳米级的均匀粒子［‘－‘］、这些方法与水解法和相转化法等方法比较，反应物浓度要大几个数量级，而反应时间却短很多，因而受到研究人员的关注．乳状液也能提供亚微米、微米及以上级的微环境，因此，可以应用O／W乳状液乳液中的聚合反应制备亲液的分散体系．然而，极少有关利用w／O乳状液制备僧液溶胶的报导问；最近…     

氧化锌-银复合纳米粒子的制备：吸收光谱和荧光光谱

金属和半导体纳米粒子的制备及性质的研究是当今材料科学和物理化学的热门课题［1－6］．在利用太阳能光降解环境污染物、生物传感器以及光生物等方面这些纳米粒子都具有实际应用的可能性．对纳米粒子表面进行修饰而形成的复合纳米粒子可以有效地调整单一颗粒的表面性质甚至颗粒的稳定性．另外，复合纳米粒子的制备对研究纳米粒子的尺寸量子化效应、非线性光学性质及其它光电性质都有重要的意义．人们已成功地制备了许多复合金属－金属纳米粒子，如Cu－Ag［7］，Ag-Pd［8］及Ag－Pt［9］等．关于复合半导体－半导作纳米粒子也有报导，如C…     

短链分子交换粘土纳米级复合材料合成和表征

短链分子交换粘土纳米级复合材料合成和表征石恒真＊ＬａｎＴｉｅＰｉｎｎａｖａｉａＴ．Ｊ．（河南周口师范高等专科学校化学系周口４６６０００）（美国密执安州立大学化学系）关键词嵌入，粘土，纳米级复合材料，合成，表征１９９６－０６－０７收稿，１９９６－１２－...     

基于微流控技术制备微/纳米粒子材料

具有特殊性质的微/纳米粒子,在药物传递、吸收分离、光电材料和磁性设备等多个领域具有重要的应用价值。近年来,微流控技术在有机合成、高分子化学以及材料制备等领域表现出传统釜式反应器无法比拟的优势。本文介绍了基于微流控技术制备微/纳米粒子的最新研究进展,包括以单乳液为模板合成球形和非球形聚合物粒子、无机物粒子、贵金属纳米粒子和半导体纳米粒子,以多重乳状液为模板制备壳核粒子、Janus粒子和微囊。     

原油乳状液稳定性和破乳研究进展

本文从控制乳状液稳定性的一些因素－界面膜、界面张力、双电层、空间位阻、固体粒子、液晶、油相溶解度、连续相粘度等方面综述了有关乳状液稳定性的一些研究进展。对国内外有关原油乳状液的破乳研究也做了综述。同时，介绍了应用于乳状液稳定性研究的新的实验技术和仪器。     

不同形状γ—MnO2超微粒子的制备

不同形状γ┐ＭｎＯ２超微粒子的制备李亚栋＊李成韦钱逸泰刘元辉李龙泉（中国科学技术大学化学系，结构成分开放实验室合肥２３００２６）关键词γ－ＭｎＯ２，超微粒子，制备１９９６－０８－１２收稿，１９９６－１２－１２修回安徽省科委资助项目，国家纳米材料攀登计...     

纳米TiO2在空心陶瓷微球上的固定化及光催化分解辛烷

纳米ＴｉＯ２在空心陶瓷微球上的固定化及光催化分解辛烷方佑龄＊赵文宽尹少华董庆华孙育斌（武汉大学化学系武汉４３００７２）（武汉工业大学分析测试中心武汉）关键词光催化分解，二氧化钛，空心陶瓷微球，固定化，辛烷１９９６－０８－２６收稿，１９９６－１１－１１...     

固体粒子稳定的乳状液研究进展

综述了固体粒子对乳状液稳定性影响的有关研究进展。微细不溶的固体粒子构成重要的一类乳化剂,被水相和油相部分润湿的固体粒子能够有效地稳定乳状液。固体粒子稳定乳状液的效果取决于以下因素:粒子大小、粒子间相互作用和粒子的润湿性质。固体粒子存在的油-水界面表现出粘弹行为,这种粘弹界面膜可大大地提高空间位阻,减缓乳状液液珠间液膜变薄的速率,从而提高乳状液地稳定性。原油中的粘土、胶质、沥青质和石蜡等胶体粒子被证明对乳状液的稳定性起很大的作用。     

聚碳硅烷／纳米镍粉的热裂解

聚碳硅烷／纳米镍粉的热裂解王军＊宋永才冯春祥（国防科学技术大学材料工程与应用化学系长沙４１００７３）关键词聚碳硅烷，纳米材料，镍，热解，碳化硅纤维１９９６－０９－１７收稿，１９９６－１２－１３修回国家攻关计划和“８６３”高技术资助项目聚碳硅烷（ＰＣＳ...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.