共查询到20条相似文献,搜索用时 31 毫秒
1.
2.
分布布喇格反射镜的反射特性 总被引:2,自引:1,他引:1
采用等效法布里珀罗(FP)腔方法对分布布喇格反射镜(DBR)的特性进行了研究,计算并讨论了上下两层DBR结构非对称模型反射率的变化.设计了DBR反射镜的反射谱中心波长为850nm的结构.随着DBR周期数的增加,腔反射率峰值逐渐增加.上下两层DBR反射镜的厚度由反射率和中心波长决定.实验表明,下DBR的周期数为30对左右,上DBR的周期数为20对左右,易实现激光输出.非对称的双层DBR的反射特性表明理论计算与实验结果基本一致. 相似文献
3.
Kalluri D.K. 《IEEE transactions on plasma science. IEEE Nuclear and Plasma Sciences Society》1988,16(1):11-16
The reflection by a suddenly created plasma half-space of a time-harmonic plane electromagnetic wave propagating in free space is considered. The problem involves a temporal discontinuity, a spatial discontinuity, and a dispersive medium. The steady-state solution is obtained by considering the basic features of the scattering processes due to each of the discontinuities in terms of analogous transmission-line models. The electric field of the reflected wave consists of two components. One component (called component A) is of the same frequency as the incident wave frequency and is due to the spatial discontinuity. The other component (called component B) is of a different frequency and arises because of the temporal discontinuity. The B component is damped out even if the plasma is only slightly lossy. The damping rate of the B component is calculated. The transient solution is obtained through the use of Laplace transforms. The solution is given in terms of Bessel-like functions. The limiting value of this solution is shown to agree with the steady-state solution. Numerical results illustrating the transient effects are for two typical cases 相似文献
4.
5.
提出了活化法测量DD中子产额的实验方法,该方法可提高DD中子产额测量的精度。方法基于铟同位素115In与DD中子的非弹性散射反应,活化反应释放的射线被HPGe探测器记录,根据活化系统标定灵敏度推算出中子产额。分析了探测器记录的活化射线数与中子产额间的关系。介绍了一套活化测量的系统设计。通过蒙特卡罗方法模拟了活化样品出射的射线数与样品厚度的关系,模拟结果表明:样品厚度取为1 cm可兼顾活化效率和测量精度。在加速器上对铟活化样品进行了标定实验,实验结果表明:在聚变中子产额大于2109的实验中可使用铟活化诊断方法,中子产额测量的相对标准误差在10%以内。随着聚变中子产额的不断提高,铟活化测量中子产额的精度可进一步提高。 相似文献
6.
提出了活化法测量DD中子产额的实验方法,该方法可提高DD中子产额测量的精度。方法基于铟同位素115In与DD中子的非弹性散射反应,活化反应释放的射线被HPGe探测器记录,根据活化系统标定灵敏度推算出中子产额。分析了探测器记录的活化射线数与中子产额间的关系。介绍了一套活化测量的系统设计。通过蒙特卡罗方法模拟了活化样品出射的射线数与样品厚度的关系,模拟结果表明:样品厚度取为1 cm可兼顾活化效率和测量精度。在加速器上对铟活化样品进行了标定实验,实验结果表明:在聚变中子产额大于2109的实验中可使用铟活化诊断方法,中子产额测量的相对标准误差在10%以内。随着聚变中子产额的不断提高,铟活化测量中子产额的精度可进一步提高。 相似文献
7.
A. N. Chernikov V. N. Trofimov 《Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques》2014,8(5):956-960
A helium-3 adsorption refrigerator cooled with a pulse-tube cryocooler is developed. The refrigerator has two stages of adsorption pumping. The first stage is designed for the condensing and pumping of helium-4, whose cooling capacity is used for the condensation of helium-3. The second stage is designed for pumping helium-3. The final temperature reached by the refrigerator is 0.305 K. This temperature is retained for at least 24 h. The time required for helium recondensation and the obtainment of low temperature is 1.5 h. The cryostat is a self-contained instrument, as it contains no external gas-supply pipelines and the working gas is stored directly within the working volume of the refrigerator. The work is performed in the Frank Laboratory of Neutron Physics of the Joint Institute for Nuclear Research. 相似文献
8.
9.
10.
设计了MV级小型重复频率Marx发生器,简化了发生器充放电回路,减小了能量损失;分析了隔离电感变化时对发生器输出脉冲电压波形的影响,减小了隔离电感体积,提高了隔离有效性;优化了开关腔体结构,实现了间距连续可调,且受外围结构的变化或振动影响,13个开关间隙置于同一垂线上,火花放电时产生的紫外线或射线相互照射,加速了开关导通,减小了Marx发生器输出电压抖动。塑壳电容降压使用,提高了发生器的可靠性;通过Pspice模拟和三维静电场分析,实现了发生器小型化,整个Marx发生器放置在一个密封纯净SF6气体的金属圆筒内,体积小于0.25 m3。优化设计和实验研究,发生器在高阻负载上输出峰值1.02 MV、前沿约30 ns的高压脉冲,发生器储能290 J,电压幅度抖动约10%,前沿抖动小于10 ns,可实现重复频率20 Hz稳定运行。 相似文献
11.
设计了MV级小型重复频率Marx发生器,简化了发生器充放电回路,减小了能量损失;分析了隔离电感变化时对发生器输出脉冲电压波形的影响,减小了隔离电感体积,提高了隔离有效性;优化了开关腔体结构,实现了间距连续可调,且受外围结构的变化或振动影响,13个开关间隙置于同一垂线上,火花放电时产生的紫外线或射线相互照射,加速了开关导通,减小了Marx发生器输出电压抖动。塑壳电容降压使用,提高了发生器的可靠性;通过Pspice模拟和三维静电场分析,实现了发生器小型化,整个Marx发生器放置在一个密封纯净SF6气体的金属圆筒内,体积小于0.25m3。优化设计和实验研究,发生器在高阻负载上输出峰值1.02MV、前沿约30ns的高压脉冲,发生器储能290J,电压幅度抖动约10%,前沿抖动小于10ns,可实现重复频率20Hz稳定运行。 相似文献
12.
13.
:根据Stevenson等效电路法设计了两个X波段低副瓣波导缝隙阵列天线。通过建立多个缝隙时的谐振长度提取模型,计算了存在缝隙间互耦时的谐振长度。两个阵列天线测试结果和仿真结果吻合良好,线阵中心频率实测增益为17.83 dB,其仿真结果为18.2 dB,实测副瓣为-28.12 dB,其仿真结果为-29.97 dB;平面阵列中心频率实测增益为27 dB,其仿真结果为27.9 dB, 实测H面副瓣为-27.2 dB,其仿真结果为-29.9 dB,实测E面副瓣为-22 dB,其仿真结果为-22 dB。 相似文献
14.
飞秒紫外激光脉冲振荡的实验研究 总被引:1,自引:0,他引:1
本文讨论了采用空间光脉冲光谱的啁啾特性和选择聚焦透镜焦距相结合的技术大大提高二次谐波转换效率和产生紫外飞秒光脉冲的实验研究.采用一类相位匹配的BBO晶体,当飞秒钛宝石光脉冲平均功率为560mW时,二次谐波输出功率为352mW,二次谐波转换效率高达63%;采用一类相位匹配的LBO晶体时,获得高光束质量的倍频蓝光输出,输出平均功率为170mW,转换效率大于30%.运用LBO倍频产生的蓝光脉冲和剩余的基频光脉冲进行了三次谐波的振荡研究.三倍频晶体采用BBO,通过优化设计倍频光与基频光之间的空间模匹配及精确时间延迟,得到飞秒紫外光输出,输出功率为2mW,中心波长约为280nm,重复率为100MHz. 相似文献
15.
M. I. Ryazanov A. A. Tishchenko 《Journal of Experimental and Theoretical Physics》2006,103(4):539-545
The dielectric properties of a quasi-two-dimensional molecular monolayer are analyzed. The dielectric function of the monolayer is expressed in terms of molecular polarizability and monolayer characteristics. The expression is analogous to the well-known Clausius-Mossotti equation for three-dimensional systems. The response of the monolayer to an external field is calculated. The case of a planar array of nanoparticles is also considered. The solution is obtained in the framework of a local-field theory. 相似文献
16.
曳引机的驱动控制系统是垂直升降电梯的关键设备,对电梯性能具有重要影响,具有较大的研究价值。对一种基于多模态PID控制的永磁同步曳引机电梯驱动控制系统进行了研究。给出了曳引机驱动控制系统的总体设计方案,将系统分为主控模块、驱动模块和信号采集模块进行设计并介绍了各模块硬件电路的设计。针对曳引机控制采用了电流、速度双闭环控制算法,给出了主控制器DSP的软件流程设计,并对速度环采用的多模态PID控制算法进行了研究。在电梯公司的试验塔对设计的驱动控制系统进行现场调试,调试结果表明电梯在高、中、低速下都能够良好地跟踪给定的S型速度曲线,且超调量较小,稳态误差较小,可以满足电梯控制的性能指标要求。 相似文献
17.
18.
由于SU-8光刻胶的内应力将会影响高深宽比结构的全金属光栅的制作质量,本文针对近年来SU-8光刻胶应力测量困难的情况,提出了一种基于激光剪切散斑干涉技术的SU-8光刻胶应变分布测量的新方法。该方法通过对被测胶体加载前后两幅干涉图像的处理,直接得到被测胶体结构的全场应变分布情况,由胶体的应变变形数据即可反映出内应力的变化和分布趋势。同时使用ANSYS有限元分析软件对同一被测胶体进行应变仿真模拟研究,获得胶体结构的变形场仿真数据。组建了实验系统,进行了实验验证,结果表明:实际测量变形量约为1.189μm,仿真的最大变形量为1.088μm,测量误差在允许范围内,且测量的形变趋势与仿真模拟结果相一致,表明激光剪切散斑干涉技术可应用于SU-8光刻胶的应变分布全场无损检测。 相似文献
19.
The direct method of Clarkson and Kruskal is used to study the symmetry reductions of the Burgers equation with linear damping.
The classical similarity reductions reported previously is recovered. The new, nonclassical similarity reduction is obtained.
The new similarity solution is given, and it is also obtained by means of the singular manifold method. The nonclassical method
is used to demonstrate that the new exact solution is indeed a nonclassical similarity solution.
This work has been supported by the Postdoctoral Science Foundation of China. 相似文献
20.
The mathematical model for a racetrack microtron with an output energy of 50 MeV is described. The number of orbits is five.
The increment of energy beam increase is 10 MeV per turn. The frequency rate of acceleration is four. One feature of the accelerator
is injection directly into the acceleration section with a rather low kinetic energy beam of 0.8–1 MeV. The parameters that
affect the capture region in the acceleration mode are determined. The region of capture is calculated. The basic properties
of the focusing system are studied. The conditions for the optimum passage of the beam are substantiated for all orbits. 相似文献