Solvent extraction of scandium from malonic acid with high molecular-weight amines

Scandium is quantitatively extracted with 4% Amberlite LA-1 or Amberlite LA-2 in xylene at pH 2.5-5.5 from 0.1M malonic acid. Scandium is stripped from the organic phase with 0.5M hydrochloric acid and determined spectrophotometrically at 525 nm, as its complex with Alizarin Red S. Primene JM-T, tri-iso-octylamine, tributylamine and tribenzylamine have also been studied as extractants, but found to be unsatisfactory for various reasons. Xylene, toluene, benzene, chloroform, carbon tetrachloride, hexane, cyclohexane and kerosene have been studied as diluents. Xylene is found to be the most efficient. Scandium can be separated from most metals by selective extraction, and from gallium, thallium(III), bismuth, antimony(III), chromium(III), copper(II), iron(III), uranium(VI), cerium, zirconium, indium, thorium and titanium by selective stripping, in some cases combined with use of suitable complexing media to retain the other metals in the organic phase.     

Synthesis of Bis(tricarbonylcyclopentadienylmolybdenum)bismuth(III) Chloride and Its Reaction with Metals

Polynuclear organometallic compounds [CpMo(CO)₃]₂BiCl and [CpMo(CO)₃]BiCl₂ were prepared by reaction of bismuth with tricarbonylcyclopentadienylmolybdenum chloride in dimethyl sulfoxide (DMSO). [CpMo(CO)₃]₂BiCl is reduced with magnesium or indium in tetrahydrofuran to give bismuth, [CpMo(CO)₃]₃Bi, and magnesium or indium chloride. In the presence of DMSO, the reaction of [CpMo(CO)₃]₂BiCl with magnesium or indium yields bismuth and the organomolybdenum derivative of magnesium or lithium, respectively.     

Bismuth Nanoparticles in Stripping Voltammetry of Sulfide Ions

For the first time, carbon screen‐printed electrodes (CSPE) modified with bismuth nanoparticles have been used to determine sulfide ions with stripping voltammetry (SV) by formation of sparingly soluble compounds with the electrode material. The impact of weight, degree of bismuth dispersion on CSPE surface, and Bi₂S₃ accumulation parameters on the sensitivity of the sensor have been studied. It has been established that bismuth nanoparticles (Bi_nano) as agglomerates of about 180 nm exhibit the optimum sensory properties. The linear concentration range has been observed over the interval of 0.93–5 µM sulfide ions during the accumulation time of 75 s. A detection limit of 0.15 µM sulfide ions was achieved.     

Diphenyl(trifluoromethyl)bismuth and phenylbis(trifluoromethyl)bismuth—new organoperfluoroalkyl derivatives of tervalent bismuth

Diphenyl(trifluoromethyl)bismuth and phenylbis(trifluoromethyl)bismuth have been synthesized from Cd(Cf₃)₂ 2CH₃CN and the corresponding phenylbismuth halides. The reactions of the new compounds are similar to those of tris(perfluoroorgano)bismuth compounds and mixed phenyl-akyl bismuth derivatives.     

Substituted bismuth vanadates and chromates: New aspects

The work is devoted to the synthesis and attestation of a number of substituted vanadates and chromates of bismuth. For bismuth vanadates of the BIMEVOX family, the homogeneity regions of the Bi₄V_{2 – x}Cr _x O_{11 ± d} solid solutions have been refined, the features of the structure change of the compounds with increasing chromium content and changing temperature have been noted, and the powders and ceramics have been studied by electron microscopy. For the first time, as an impurity, an individually substituted bismuth chromate of the composition Substituted bismuth chromate of the Bi₁₃Cr_{5 – y}V _y O_{34.5 – d} (y = 0.95 ± 0.05) composition has been detected for the first time as an impurity and synthesized as an individual compound, which has been characterized by X-ray diffraction, electron microscopy, chemical analysis, and photoelectron spectroscopy data; its homogeneity range has been determined, and electroconductive characteristics have been studied.     

Definitive identification of cysteine and glutathione complexes of bismuth by mass spectrometry: assessing the biochemical fate of bismuth pharmaceutical agents

Solutions containing BiCl3, bismuth subsalicylate or Bi(NO3)3 with L-cysteine, DL-homocysteine, D-methionine or glutathione have been examined by electrospray mass spectrometry. Prominent peaks are assigned to bismuth complexes of these biomolecules and provide insight towards understanding the bioactivity of bismuth compounds.     

Synthesis and structures of the first bismuth-ester complexes using heterobifunctional thiolate anchored ligands and mass spectrometric identification of ligand-bridged derivatives

The first systematic series of bismuth complexes involving ester donors, Bi(SCH(2)C(O)OCH(2)CH(3))Cl(2), Bi(SCH(2)C(O)OCH(3))(2)Cl, and Bi(SCH(2)COOCH(3))(3), has been isolated and characterized by spectroscopic (IR, Raman) and X-ray crystallographic data. In addition, these and other species have been identified by electron-impact, electrospray, and atmospheric pressure chemical ionization mass spectometry. The generally applicable synthetic methodology involves the use of heterobifunctional ligands containing a thiolate moiety as an anchor to facilitate coordinate interactions between weak donors (carbonyls) and weak acids (bismuth). The bifunctional nature of the ligands is manifested in both chelating and bridging roles. Important comparisons can be made with the pharmaceutical agent "colloidal bismuth subcitrate" (CBS). The observations allow for a new appreciation of bioactive bismuth compounds, by providing an approach to study the interaction of biorelevant functional groups with bismuth.     

Organobismuth(III) and organobismuth(V) carboxylates and their evaluation as paint driers

A range of bismuth and organobismuth carboxylates has been prepared e.g. Bi(carboxylate)₃; PhBi(carboxylate′)₂; and Ph₃Bi(carboxylate″)₂ where carboxylate=octanoate, i.e. 5-ethylhexanoate; carboxylate′=acetate and monomaleate; carboxylate″=acetate, propionate, benzoate, 5-ethylhexanoate, and 0.5 oxalate. A combination of IR (solid) and NMR (solution) studies suggests that in the case of the bismuth(V) compounds the carboxylates may be inequivalent in the crystalline forms but equivalent in solution. The compounds have been tested as driers in two paint formulations, Synolac 50W (linseed-based) and Sorbal P470 (linoleic-rich). Although initially promising results were obtained for Synolac 50W, the shelf life of the bismuth driers was poor. With Sorbal P470, bismuth driers were inferior to established formulations. However, a combination of Bi(OOCH₇H₁₅)₃ with tris(diethyldithiocarbamato)-bismuth(III) out-performed established driers.     

Identification, isolation, and characterization of cysteinate and thiolactate complexes of bismuth

Although bismuth compounds have been used in medicine for over 200 years, chemical characterization of complexes involving biological molecules is minimal and mechanisms of bioactivity are ill-defined. The thiophilic nature of bismuth implicates sulfur centers as likely sites for interaction, and we have exploited this feature to identify, isolate, and characterize complexes of bismuth with thiolate-carboxylate bifunctional ligands including the amino acid l-cysteine. The solid-state structures of potassium dichloro(thiopropionato)bismuth (K[1d]), dimethylaminoethanethiolato(thiopropionato)bismuth (4), and dinitrato(cysteinato)bismuthphenanthroline [5(phen)] are compared with data from electrospray ionization mass spectrometry (ESI-MS). ESI-MS is applied to reactions of BiCl(3) or Bi(NO(3))(3) with mercaptosuccinic, malic, and succinic acids to illustrate the general observation of 1:1 and 1:2 complexes.     

Metal complexes with mixed acido ligands communication 11. Nitratochloride compounds of bismuth(III)

Conclusions Nitratochloride compounds of bismuth(III) with potassium and guanidine as outer-sphere cations have been synthesized for the first time and their properties studied.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1463–1465, July, 1986.     

The role of metal cations in the homogeneous phase redox reaction of a NADH model compound

The catalytic activity of magnesium cations in the charge transfer between 1-benzyl-1,4-dihydronicotinamide (BNAH) and several aromatic compounds has been studied in acetonitrile by electrochemical techniques. Magnesium cations form complex compounds with both BNAH and the organic substrates studied. At the same time, magnesium forms ion-associates with negatively charged substrate molecules. Energetically, the effect of ion-pairing is much greater than the negative effect of complex formation. The rate of homogeneous phase reaction was also studied to show that the Michaelis-Menten type mechanism is operating.     

Synthesis and structure of 5,6,7,12-tetrahydrodibenz[c,f][1,5]azabismocines

Hypervalent organobismuth compounds, 6-tert-butyl-5,6,7,12-tetrahydrodibenz[c,f][1,5]azabismocines, with 13 different substituents on the bismuth atom including halogens, alkyl, alkenyl, alkynyl, aryl, or phenylthio groups have been synthesized. A key compound, 12-chloro-6-tert-butyl-5,6,7,12-tetrahydrodibenz[c,f][1,5]azabismocine, which is a precursor for other azabismocines, has been synthesized by two different procedures; one is based on Akiba’s method using 2-bromobenzylbromide as one of the starting materials and the other is a newly developed one using a cheaper starting material, 2-chlorobenzyl chloride. The structures of 12 new bismuth compounds were determined by X-ray diffraction. The eight-membered tetrahydroazabismocine ring has proved to be highly flexible and the hypervalent Bi-N bond distances vary ranging from 2.568(3) to 2.896(5) Å, depending on the electronic nature of the substituents on the bismuth atom. The Bi-N bond distances have good linear relationship against Hammett’s σ_m constants.     

Spectrophotometric microdetermination of bismuth in organic compounds after oxygen-flask combustion

A method has been developed for the micro and submicro determination of bismuth in organic compounds, based on combustion in an oxygen-filled flask, provided with a silica spiral instead of the conventional platinum holder (which alloys with bismuth). After absorption of the products in hydrochloric acid (1 + 1), the solution is chemically treated to convert the bismuth into the orange-yellow BiI(-)(4) complex, then the absorbance is measured at 465 nm. Analysis of 12 organic compounds containing 28-74% of bismuth yielded satisfactory results with a maximum standard deviation of 0.4%.     

Synthesis of complex hydroxo salts of magnesium, nickel, cobalt, aluminum, and bismuth and oxide catalysts on their base

Synthesis methods have been developed for the precursors of oxide catalysts that include the combination of magnesium nickel cobalt aluminum hydroxocarbonate, with a layered hydrotalcite-type structure and decavanadate and paramolybdate ions in the anion layers, and bismuth hydroxocarbonate. On the base of these precursors, multicomponent oxide catalysts have been manufactured for the oxidative dehydrogenation (OD) of light alkanes. Some of these catalysts showed high selectivities and high product yields in the conversion of ethane to ethylene.     

Solvation of the bismuth(III) ion by water, dimethyl sulfoxide, N,N'-dimethylpropyleneurea, and N,N-dimethylthioformamide. An EXAFS, large-angle X-ray scattering, and crystallographic structural study

The structure of the solvated bismuth(III) ion in aqueous, dimethyl sulfoxide, N,N'-dimethylpropyleneurea, and N,N-dimethylthioformamide solution has been studied by means of EXAFS and large-angle X-ray scattering (LAXS). The crystal structures of the solid compounds octakis(dimethyl sulfoxide)bismuth(III) perchlorate, [Bi(OS(CH3)2)8](ClO4)3, hexakis(N,N'-dimethylpropyleneurea)bismuth(III) perchlorate, [Bi(OCN2(CH2)3(CH3)2)6](ClO4)3, and nonaaquabismuth(III) trifluoromethanesulfonate, [Bi(H2O)9](CF3SO3)3 (redetermination), have been determined. The aqueous solutions must be strongly acidic, since the hydrated bismuth(III) ion starts to hydrolyze into Bi6O4(OH)4(6+) complexes already at an excess of strong acid at 1.0 mol.dm-3. For very acidic aqueous perchlorate solutions, the LAXS and EXAFS data gave a satisfactory fit for eight-coordination of the bismuth(III) ion, with a mean Bi-O bond distance of 2.41(1) A. The crystal structure of octakis(dimethyl sulfoxide)bismuth(III) perchlorate shows that the bismuth(III) ion coordinates eight dimethyl sulfoxide molecules via the oxygen atoms in a distorted square antiprismatic configuration. The mean Bi-O bond distance is 2.43 A and the mean Bi...S distance 3.56 A. For the dimethyl sulfoxide solution, the corresponding mean distances were found to be 2.411(6) and 3.535(12) A. The N,N'-dimethylpropyleneurea-solvated bismuth(III) ion is octahedrally coordinated in both solid state and solution with the Bi-O bond distances of 2.324(5) and 2.322(3) A, respectively. The bismuth(III) ion is six-coordinated in the sulfur donor solvent N,N-dimethylthioformamide with a mean Bi-S bond distance of 2.794(8) A. A comparison with the structure of the solvated lanthanum(III) ion shows that the bismuth(III) ion is smaller for all coordination numbers. New effective ionic radii for the bismuth(III) ion in different coordination numbers are proposed, based on results in this study and in the literature.     

Magnesium-Bismuth System: Thermodynamic Properties and Prospects for Use in Magnesium-Ion Batteries

Along with large-scale studies of promising electrode materials for lithium-ion and sodium-ion batteries, in the past 10–15 years there has been interest in rechargeable batteries with magnesium anode and in magnesium-ion batteries. Bismuth shows promise as a material for the negative electrode of magnesium-ion batteries. The review summarizes the data on the thermodynamic properties of magnesium-bismuth alloys and on possible use of bismuth or bismuth alloys in magnesium-ion batteries.

     

Antimony(V) and bismuth(V) complexes of lapachol: synthesis, crystal structure and cytotoxic activity

Antimony(V) and bismuth(V) complexes of lapachol have been synthesized by the reaction of Ph?SbCl? or Ph?BiCl? with lapachol (Lp) and characterized by several physicochemical techniques such as IR, and NMR spectroscopy and X-ray crystallography. The compounds contain six-coordinated antimony and bismuth atoms. The antimony(V) complex is a monomeric derivative, (Lp)(Ph?Sb)OH, and the bismuth(V) complex is a dinuclear compound bridged by an oxygen atom, (Lp)?(Ph?Bi)?O. Both compounds inhibited the growth of a chronic myelogenous leukemia cell line and the complex of Bi(V) was about five times more active than free lapachol. This work provides a rare example of an organo-Bi(V) complex showing significant cytotoxic activity.     

Seperations involving sulphides : Separation of alkaline earth metals from some elements that form sulphides

It has been shown that 2N sodium sulphide reagent can be used efficiently for separating. 1.Barium from rhenium, platinum, gold, bismuth, palladium, lead or cadmium. 2.Strontium, calcium and magnesium from rhenium, platium, gold, mercury, bismuth, palladium, lead or cadmium     

Formation of the bismuth thiolate compound layer on bismuth surface

The structure and composition of thiolate multilayers formed at bismuth monocrystal electrodes from solutions of 1-octadecanethiol and 1-decanethiol in ethanol at open circuit potential are characterized by cyclic voltammetry, electrochemical impedance and infrared reflectance spectroscopy, optical microscopy and AFM methods. Analysis of results demonstrates that after holding of Bi(h k l) electrodes during some hours in solution of thiol in ethanol bismuth is covered with a thick porous layer of bismuth thiolate compound. For the verification of formed thiolate layers the new compounds tris(1-octadecylthio)bismuthine and tris(1-decylthio)bismuthine were also synthesised from bismuth(III)oxide and thiol in hexane solution and a similarity of properties with the bismuth thiolate compounds, formed at the bismuth electrode surface, has been demonstrated.     

Investigation of the Scope of Heterogeneous and Homogeneous Procedures for Preparing Magnesium Chelates of Porphyrins, Hydroporphyrins, and Phthalocyanines

A simple method has been developed for metalation of porphyrinic compounds under homogeneous conditions at room temperature using a stable ethereal solution of MgI(2) and N,N-diisopropylethylamine. A previously developed heterogeneous procedure employs a mixture of a magnesium halide and a nonnucleophilic amine in a noncoordinating solvent at room temperature. The scope of the heterogeneous and homogeneous magnesium insertion procedures has been investigated across a family of 19 porphyrinic compounds, including synthetic porphyrins, synthetic or naturally occurring chlorins, and organic-soluble phthalocyanines. The rate of magnesium insertion increased in the series phthalocyanines < chlorins < porphyrins, which parallels the basicity of the ligands. Though phthalocyanines have the smallest core size, the magnesium phthalocyanines were far more stable than magnesium porphyrins to acid-induced demetalation. The heterogeneous method is broadly applicable to porphyrins, chlorins, and phthalocyanines. The homogeneous method is generally slower than the heterogeneous method, though both afford rapid metalation of most porphyrins, including electron-deficient, peripherally coordinating, or facially encumbered meso-substituted tetraarylporphyrins, and the beta-substituted octaethylporphyrin. Chlorin e(6) trimethyl ester and methyl pyropheophorbide a were metalated cleanly under homogeneous but not heterogeneous conditions, while pheophytin a failed with both methods. The homogeneous method failed altogether with phthalocyanines. Several methods in magnesium chemistry have been developed that augment these procedures, including a mild synthesis of tetraphenylchlorin and a streamlined separation of porphyrin, chlorin, and bacteriochlorins based on selective formation of the magnesium chelates. Collectively, these methods should broaden the scope of model systems based on magnesium chelates of porphyrinic compounds.