Thermodynamics of tri- and pentabromide anions in aqueous solution

Formation constants for the tribromide and pentabromide anions were measured by a vapor partitioning method from 5 to 80°C. The molal thermodynamic parameters for these respective species at 25°C are: K ₃ –16.73, H ^o =–5.90 kJ-mol ^–1 , Cp ^o =–29 J-K ^–1 -mol ^–1 , and S ^o =3.6 J-K ^–1 -mol ^–1 ; K ₅ =37.7, H ^o =–13.0 kJ-mol ^–1 , S ^o =–13.6 J-K ^–1 -mol ^–1 , with Cp ^o assumed zero. These results are used to reevaluate published emf results for the bromine/bromide couple.     

Dissociation quotients of succinic acid in aqueous sodium chloride media to 225°C

The first and second molal dissociation quotients of succinic acid were measured potentiometrically with a hydrogen-electrode, concentration cell. These measurements were carried out from 0 to 225°C over 25° intervals at five ionic strengths ranging from 0.1 to 5.0 molal (NaCl). The dissociation quotients from this and two other studies were combined and treated with empirical equations to yield the following thermodynamic quantities for the first acid dissociation equilibrium at 25°C: log K_1a=–4.210±0.003; H _1a ⁰ =2.9±0.2 kJ-mol^–1; S _1a ⁰ =–71±1 J-mol^–1-K^–1; and C _p1a ⁰ =–98±3 J-mol^–1-K^–1; and for the second acid dissociation equilibrium at 25°C: log K_2a=–5.638±0.001; H _2a ⁰ = –0.5±0.1 kJ-mol^–1; S _2a ⁰ =–109.7±0.4 J-mol^–1-K^–1; and C _p2a ⁰ = –215±8 J-mol^–1-K^–1.     

Spectrochemistry of solutions,part 23. Changes of enthalpy and entropy in the formation of contact ion pairs: A vibrational spectroscopic appraisal using thiocyanate and azide solutions

Summary The vibrational spectra of solutions have been analyzed to assess both qualitatively and quantitatively the changes in enthalpy and entropy for ion pair formation in solutions of LiNCS, Mg(NCS)₂, and LiN₃ in liquid ammonia, dimethylformamide, dimethylsulphoxide and acetonitrile. Contrary to predictions both the H _ass and S _ass terms are all positive in the cases examined, indicating that the driving force in the ion association process derives from solvent-solute restructuring, and not the energy of the interaction between the cation and anion. This characteristic of contact ion pair formation is likely to be found to be applicable over a wide range of solvents. The following specific values of the thermodynamic parameters at 298 K have been obtained: LiNCS/DMF, G=–1.3 (1) kJ mol^–1, H _ass =+1.8 (5) kJ mol^–, S _ass =+10 (2) J mol^–1 K^–1; LiNCS/DMSO, G=+0.9 (2) kJ mol^–1, H _ass =+0.3 (3) kJ mol^–1; Mg(NCS)₂/DMF, G _ass =–4.0 (3) kJ mol^–1, H _ass =+15 (4) kJ mol^–1, S=+64 (17) kJ mol^–1; LiN₃/DMSO, G _ass =–2.5 (3) kJ mol^–1, H _ass =+4.9 (9) kJ mol^–1, S _ass =+25 (10) J K^–1 mol^–1.Submitted to celebrate the 70th Birthday of Professor Viktor Gutmann, and in recognition of his considerable contributions towards the better understanding of Chemistry in the Solution Phase     

Nuclear magnetic resonance study of the ligand interchange of Ba2+-18-crown-6 complex in methanol solution

Exchange kinetics of Ba²⁺-18-crown-6 complex in deuterated methanol solution was studied by proton NMR line-shape analysis of a series of solutions containing equal population of free and complexed 18-crown-6, but varying concentration of the macrocycle, at various temperatures. From –33 to 37°C, the predominant mechanism for the exchange of the ligand between the two sites is a bimolecular pathway which is characterized by the following activation parameters:E _a=47±2 kJ-mol^–1; H =45±2 kJ-mol^–1; S =–8±4 J-mol^–1-K^–1. However, the contribution of a dissociative mechanism with activation parametersE _a=36±5 kJ-mol^–1, H =33±5 kJ-mol^–1 and S =104±18 J-mol^–1-K^–1 becomes more important at higher temperatures.     

Heat of Formation for LiMyMn2−yO4 (M=Co,Cr, Li,Mg, Ni) Spinel Solid Solution

The enthalpy of formation for LiM_yMn_2–yO₄ (M=Co, Cr, Li, Mg, Ni) was measured by a Tian-Calvet type high temperature isothermal microcalorimeter. The standard enthalpy of formation for LiMn₂O₄ at 876 K was evaluated to be H_f⁰=–1404.2±6.4 kJ mol^–1. The partial substitution of Co and Ni for Mn decreased the absolute H_f⁰ value, while that of Cr and Mg for Mn increased the absolute H_f⁰ value. In the case of the partial substitution of Li for Mn, no marked change in H_f⁰ could be observed.This revised version was published online in November 2005 with corrections to the Cover Date.     

Dissociation quotients of oxalic acid in aqueous sodium chloride media to 175°C

The first and second molal dissociation quotients of oxalic acid were measured potentiometrically in a concentration cell fitted with hydrogen electrodes. The emf of oxalic acid-bioxalate solutions was measured relative to an HCl standard solution from 25 to 125°C over 25^o intervals at nine ionic strengths ranging from 0.1 to 5.0 molal (NaCl). The molal dissociation quotients and available literature data were treated in the all anionic form by a five-term equation that yielded the following thermodynamic quantities at infinite dilution and 25°C: logK_1a=–1.277±0.010, H _1a ^o =–4.1±1.1 kJ-mol^–1, S _1a ^o =38±4 J-K^–1-mol^–1, and C _p,1a ^o =–168±41 J-K^–1-mol^–1. Similar measurements of the bioxalate-oxalate system were made at 25^o intervals from 0 to 175°C at seven ionic strengths from 0.1 to 5.0m. A similar regression of the experimentally-derived and published equilibrium quotients using a seven-term equation yielded the following values at infinite dilution and 25°C: logK_2a=–4.275±0.006, H _2a ^o =–6.8±0.5 kJ-mol^–1, S _2a ^o =–105±2 J-K^–1-mol^–1, and C _p,2a ^o =–261±12 J-K^–1-mol^–1.     

Dissociation constants of the ampholyte glycine in 50 mass % methanol-water from 5 to 55°C,with related thermodynamic quantities

The two thermodynamic dissociation constants of glycine at 11 temperatures from 5 to 55°C in 50 mass % methanol-water mixed solvent have been determined from precise emf measurements with hydrogen-silver bromide electrodes in cells without liquid junction. The first acidic dissociation constant (K ₁)for the process HG⁺H⁺+G^± is expressed as a function ofT(^oK) by the equation pK ₁ = 2043.5/T – 9.6504 + 0.019308T. At 25°C, pK ₁is 2.961 in the mixed solvent, as compared with 2.350 in water, with H°=1497 cal-mole^–1, G°=4038 cal-mole^–1, S°=–8.52 cal-°K^–1-mole^–1, and C _p ^o =–53 cal-°K^–1-mole^–1. The second acidic dissociation constant (K ₂)for the process G^±H⁺+G^– over the temperature range studied is given by the equation pK ₂ = 3627.1/T – 7.2371 + 0.015587T. At 25°C, pK ₂is 9.578 in MeOH–H₂O as compared with 9.780 in water, whereas H° is 10,257 cal-mole^–1, G° is 13,063 cal-mole^–1, S° is –9.41 cal-°K^–1-mole^–1, and C _p ^o is –43 cal-°K^–1-mole^–1. The protonated glycine becomes weaker in 50 mass % methanol-water, whereas the second dissociation process becomes stronger despite the lower dielectric constant of the mixed solvent (=56.3 at 25°C).     

Formation Enthalpy and Entropy of Exciplexes with Variable Extent of Charge Transfer in Solvents of Different Polarity

Temperature dependence was studied for relative quantum yields of emission from some exciplexes of pyrene, 1,12-benzoperylene, and 9-cyanoanthracene with methoxybenzenes or methylnaphthalenes in solvents of different polarity (ranging from toluene to acetonitrile). The enthalpy H _Ex ^*, the entropy S _Ex ^*, and the Gibbs free energy G _Ex ^*of formation of the exciplexes were determined. Depending of the Gibbs free energy of excited-state electron transfer (G _et ^*) and solvent polarity, the values of H _Ex ^*, S _Ex ^*, and G _Ex ^*vary over the ranges from –5 to –40 kJ mol^–1, from +3 to –90 J mol^–1K^–1, and from +3 to –21 kJ mol^–1, respectively. The possibility is discussed that the effect of solvent polarity G _et ^*on the exciplex formation enthalpies can be rationalized in terms of the model of correlated polarization of an exciplex and the medium.     

Pressure effects on aminonaphthalene dye fluorescence in H2O and D2O

The pressure dependence of excited-state proton transfer equilibria has been examined for aqueous solutions of several substituted napthalene dyes, in particular 1-dimethylaminonaphthalene-5-sulfonic acid (DANS). The pressure-induced shift in equilibrium is characterized by volume changes spanning the range V ^*=–18 cm³ mole^–1 to V ^*=+4 cm³-mole^–1. A deuterium oxide solvent isotope effect is evident in the pressure response of DANS, leading to a 35% smaller V_* in D₂O relative to H₂O.     

Thermodynamics of the dissociation of ammonium ion in seawater from 5 to 40°C

The dissociation constant of NH ₄ ⁺ and the associated thermodynamic functions H° and S° in synthetic seawaters of salinity 20.31, 35.00, and 44.55 have been determined by emf measurements of cells without liquid junction over the temperature range 5 to 40°C. Cells with hydrogen electrodes and silver-silver chloride electrodes, whose standard potentials in seawater media were determined in an earlier investigation, were used. At a given temperaturet (in °C), pK _a varies linearly with the formal ionic strengthI _f (uncorrected for ion pairing) according to pK _a=pK _a ^w +(0.1552–0.0003142t)I _f where pK _a ^w is the pK in pure water. The medium effect of seawater on H° amounts to less than 200 cal-mole^–1 for a change inI _f from 0 to 0.72 mole-kg^–1, and S° is less than 1 cal-°K^–1-mole^–1 in all of the media studied, as it is in water. The observed salt effect on pK _a is in close agreement with values predicted from theories of ion-ion interactions.     

Synthesis,complexing properties and molecular modelling of open chain receptors of barbiturates derived from 2,6-diamino pyridine

Three new derivatives of 2,6-diacyldiaminopyridine are reported. NMR shift titrations were performed in CDCl₃ with barbiturates. The diamide1 affords a greater complexation energy (–13.00 kJ mol^–1) with bemegride than the dithioamide2 (–9.15 kJ mol^–1). This result, unexpected on the basis of the proton acidities, is explained by the great torsion energy induced in2 by the bulky sulfur atom. Compounds3 and4 present unusual four and five H-bond features with barbital and relatively weak complexation energies (–9.53 and –16.34 kJ mol^–1, respectively). Molecular mechanics indicates that ligand4 displays a helical secondary structure which is disrupted by complexation. Calculations of the H-bond energies (E _calc.) of the intermolecular assemblies with barbital or phenobarbital and other host-guest complexes given in the literature give a good correlation (r=0.98) with experimental values: E _calc.=1.07 G _a–42.0. Limitations of this relation are discussed.     

Study on the Melting Process of Nitrocellulose by Thermal Analysis Method

The melting process of NC is studied by using modulated differential scanning calorimetry (MDSC) technique, the microscope carrier method for measuring the melting point and the simultaneous device of the solid reaction cell in situ/RSFT-IR. The results show that the endothermic process in the MDSC curve is reversible. It is caused by the phase change from solid to liquid of the mixture of initial NC, decomposition partly into condensed phase products. The values of the melting point, melting enthalpy (H_m), melting entropy (S_m), the enthalpy of decomposition (H_dec) and the heat-temperature quotient (S_dec) obtained by the MDSC curve of NC at a heating rate of 10 K min^–1 are 476.84 K, 205.6 J g^–1, 0.4312 J g^–1 K^–1, –2475.0 J g^–1 and –5.242 Jg^–1K^–1, respectively. The MDSC results of NC with different nitrogen contents show that with increasing the nitrogen content in NC, the absolute values of H_m, S_m, H_dec and S_dec increase.This revised version was published online in November 2005 with corrections to the Cover Date.     

Kinetics and mechanism of the acid-catalyzed hydrolysis of [carbonatoethylenediamine(L)2cobalt(III)]+ ions

The kinetics of acid-catalyzed hydrolysis of the [Co(en)(L)₂(O₂CO)]⁺ ion (L = imidazole, 1-methylimidazole, 2-methylimidazole) follows the rate law –d[complex]/dt = {k ₁ K[H⁺]/(1 + K[H⁺])}[complex] (15–30 or 25–40 °C, [H⁺] = 0.1–1.0 M and I = 1.0 M (NaClO₄)). The reaction course consists of a rapid pre-equilibrium protonation, followed by a rate determining chelate ring opening process and subsequent fast release of the one-end bound carbonato ligand. Kinetic parameters, k ₁ and K, at 25 °C are 5.5 × 10^–2 s^–1, 0.44 M^–1 (ImH), 5.1 × 10^–2 s^–1, 0.54 M^–1 (1-Meim) and 3.8 × 10^–3 s^–1, 0.74 M^–1 (2-MeimH) respectively, and activation parameters for k ₁ are H₁ = 43.7 ± 8.9 kJ mol^–1, S₁ = –123 ± 30 J mol^–1 deg^–1 (ImH), H₁ = 43.1 ± 0.3 kJ mol^–1, S₁ = –125 ± 1 J mol^–1 deg^–1 (1-Meim) and H₁ = 64.2 ± 4.3 kJ mol^–1, S₁ = –77 ± 14 J mol^–1 deg^–1 (2-MeimH). The results are compared with those for similar cobalt(III) complexes.     

First and second dissociation constants of deuterio-o-phthalic acid in D2O from 5 to 50°C

The first and second dissociation constants of deuterio-o-phthalic acid in deuterium oxide have been determined by the emf method over the temperature range of 5 to 50°C. The pD values for potassium deuterium phthalate have been calculated from these two constants and experimentally verified. The thermodynamic properties for the dissociation of deuterio-o-phthalic acid have been evaluated. At 25°C, these values in the molality scale are: pK _1A =3.505, pK _2A =5.890, and pD=4.518. From K _1A and K _2A , respectively: G ^o =20.003, 33.582 kJ-mol^–1; H ^o =2.851, 2.208 kJ-mol^–1; S ^o =–76.7, –105.2 J-mol^–1-K^–1; and C _p ^o =–52.7, –315.6 J-mol^–1-K^–1. The isotope effect is discussed.     

Dissociation quotients of malonic acid in aqueous sodium chloride media to 100°C

The first and second molal dissociation quotients of malonic acid were measured potentiometrically in a concentration cell fitted with hydrogen electrodes. The hydrogen ion molality of malonic acid/bimalonate solutions was measured relative to a standard aqueous HCl solution from 0 to 100°C over 25° intervals at five ionic strengths ranging from 0.1 to 5.0 molal (NaCl). The molal dissociation quotients and available literature data were treated in the all anionic form by a seven-term equation. This treatment yielded the following thermodynamic quantities for the first acid dissociation equilibrium at 25°C: logK _1a =-2.852±0.003, H _1a ^/o =0.1±0.3 kJ-mol^–1, S _1a ^o =–54.4±1.0 J-mol^–1-K^–1, and C _p,1a ^o =–185±20 J-mol^–1-K^–1. Measurements of the bimalonate/malonate system were made over the same intervals of temperature and ionic strength. A similar regression of the present and previously published equilibrium quotients using a seven-term equation yielded the following values for the second acid dissociation equilibrium at 25°C: logK_2a=–5.697±0.001, H _2a ^o =–5.13±0.11 kJ-mol^–1, S _2a ^o =–126.3±0.4 J-mol^–1-K^–1, and C _p,2a ^o =–250+10 J-mol^–1-K^–1.Presented at the Second International Symposium on Chemistry in High Temperature Water, Provo, UT, August 1991.     

Stereochemical nonrigidity of (O—Ge)-chelate bis[(2-oxo-1-hexahydroazepinyl)methyl]dichlorogermane: substantiation of the dissociative mechanism of chelating ligand exchange

Stereochemical nonrigidity of the hexacoordinated (O—Ge)-chelate bis(2-oxo-1-hexahydroazepinylmethyl)dichlorogermane in CDCl₃ was studied by dynamic NMR. The activation parameters of the intramolecular rearrangement at the coordination center are G ^# ₂₉₈ = 12.3±0.2 kcal mol^–1, H ^# = 16.9±0.2 kcal mol^–1, and S ^# = 15.3±0.7 cal mol^–1 K^–1. The dissociative mechanism of ligand exchange involving the cleavage of the OGe coordination bond is discussed based on the positive entropy of activation.     

Thermodynamic quantities for the interaction of Cl− with Mg2+, Ca2+ and H+ in aqueous solution from 250 to 325°C

The aqueous reactions, Mg²⁺+Cl^–=MgCl⁺, Ca²⁺+Cl^–=CaCl⁺, and H⁺ +Cl^–=HCl(aq), were studied as a function of ionic strength at 250, 275, 300, and 325°C using a flow calorimetric technique. The logK, H, S and C_p values were determined from the fits of the calculated and experimental heast. The data were reduced assuming a known functionality of the activity coefficient. Hence, the logK, H, S and C_p values determined in this study are dependent on the activity coefficient model used. These thermodynamic values were compared with literature results. The logK values for the formation of MgCl⁺ agree reasonably well with those reported in the literature. The logK values for CaCl⁺ formation agree reasonably well with those reported in the literature at 300 and 325°C. At lower temperatures, the agreement is poorer. The logK values for the formation of HCl(aq) are generally lower than those reported in the literature. The logK, H, S and C_p values for all three ion association reactions are positive and increase with temperature over the temperature range studied. These values are the first determined calorimetrically for the formation of MgCl⁺ and CaCl⁺ in the temperature range 275–325°C.Presented at the Second International Symposium on Chemistry in High Temperature Water, Provo, UT, August 1991.     

ViscosityB-Coefficient of ammonium azide and the enthalpy of formation of the azide anion

Recent determination of the standard enthalpy of formation of the ammonium azide _f H ^O (NH N ₃,c) and the assignment of the viscosity B-coefficient for the azide anion, B(N ₃ ^– ,aq), in aqueous solution enable us to estimate the standard enthalpy of formation of the gaseous azide anion, _f H ^O (N ₃ ^–,g , — a thermochemical magnitude in some dispute — to be 192 kJ-mol^–1.     

Heat of fusion and specific volume of poly(ethylene terephthalate) and poly(butylene terephthalate

Summary Concerning the relation between the experimental heat of fusion H* and the specific volumev of PETP a considerable uncertainty exists in literature. For PBTP obviously no data have been reported. The present paper reports H* andv measurements for undrawn PETP and PBTP samples which have been crystallized from the glassy state or from the melt at different temperatures for different periods of time.For PETP a linear relation is obtained: H* = 1411–1886v (Jg^–1). Published values for the specific volumev _c of the PETP crystal range from 0.660 to 0.687 cm³g^–1. Ifv _c = 0.660 cm³g^–1 is accepted, a heat of fusion M _m = 166 Jg^–1 is obtained for the PETP crystal.For PBTP also a linear relation is found: H* = 1296–1628v (Jg^–1). Withv _c = 0.71 cm³g^–1 one obtains H _M = 140 Jg^–1 as the heat of fusion of the PBTP crystal. The specific volumev _a of amorphous PBTP (H* = 0) is 0.796 cm³g^–1 which is much higher than the hitherto used values of 0.781–0.782 cm³g^–1. The reason for this difference is thatv _a cannot directly be measured, because the low quasi-static glass temperature of 15 °C enables quenched PBTP to undergo cold crystallization at 20 °C.

---

Zusammenfassung Hinsichtlich des Zusammenhangs zwischen experimenteller Schmelzwärme H* und spezifischem Volumenv von PETP bestehen in der Literatur beträchtliche Diskrepanzen. Für PBTP wurden bislang offensichtlich keine Ergebnisse veröffentlicht. In der vorliegenden Arbeit werden Messungen von H* undv für unverstreckte PETP- und PBTP-Proben mitgeteilt, die unterschiedlich lange bei ver-schiedenen Temperaturen aus dem Glaszustand oder aus der Schmelze kristallisiert wurden.Für PETP ergibt sich die lineare Beziehung: H* = 1411–1886v (Jg^–1). Literaturwerte für das spezifische Volumenv _c des PETP-Kristalls schwanken zwischen 0.660 und 0.687 cm³g^–1. Nimmt manv _c = 0.660 cm³g^–1 als richtig an, so erhält man als Schmelzwärme des PETP-Kristalls H _M = 166 Jg^–1 = 32 kJ mole^–1.Auch für PBTP erhält man eine lineare Abhängigkeit: H* = 1296–1628v. Mitv _c = 0.71 cm³g^–1 ergibt sich als Schmelzwärme des PBTP-Kristalls H _M = 140 Jg^–1 = 31 kJ mole^–1. Das spezifische Volumen des amorphen PBTP beträgt _a = 0.796 cm³g^–1 und ist erheblich größer als der bisher angenommene Wert von 0.781 cm³g^–1. Die Ursache fÜr diese Diskrepanz liegt darin begündet, daßv _a nicht direkt gemessen werden kann, weil wegen der niedrigen quasi-statischen Glastemperatur von 15°C bei abgeschrecktem PBTP die Kaltkristallisation bei 20°C bereits einsetzt.

---

---

With 7 figures and 3 tables

---

Dedicated to Professor Dr. Matthias Seefelder on the occasion of his 60th birthday     

Effect of acrylamide concentration on the kinetics of oxidation of tartaric acid by cerium(IV) in sulfuric-perchloric acid media

The kinetics of oxidation of tartaric acid by Ce(IV) in the absence and presence of acrylamide has been investigated spectrophotometrically in aqueous H₂SO₄–HClO₄ media at a constant ionic strength 2.0M and 25°C. Oxidation of tartaric acid in both cases was first order with respect to Ce(IV). Kinetic data showed that the reaction involves the formation of an unstable complex and an intermediate free radical. The activation parameters were calculated to be E _a =91.3±0.4 kJ-mol^–1, S=20.2±1.0 J-mol^–1-K^–1, H=88.8±0.4 kJ-mol^–1. A polymerization mechanism is discussed.