Combined use of liquid chromatography triple quadrupole mass spectrometry and liquid chromatography quadrupole time-of-flight mass spectrometry in systematic screening of pesticides and other contaminants in water samples

As a suitable way for routine screening of pesticides and control of other organic contaminants in water, the combination of liquid chromatography triple quadrupole tandem mass spectrometry (LC–QqQ-MS/MS) and liquid chromatography–hybrid quadrupole time-of-flight mass spectrometry (LC–QTOF-MS) has been applied to the analysis of 63 surface and waste water samples after conventional solid-phase extraction (SPE). The extracts were screened for 43 pesticides or degradation products by LC–QqQ-MS/MS achieving limits of detection (LOD) ranged from 0.04 to 2 ng L⁻¹. Of the 43 selected pesticides, 33 were detected in water samples. The ESI–QTOF MS instrument was run using two simultaneous acquisition functions with low and high collision energy (MS^E approach) and acquiring the full mass spectra. A home-made database containing more than 1100 organic pollutants was used for substance identification. Around 250 of these compounds were available at the laboratory as reference standards. Five pesticides and 3 of their degradation products, different to those selected in the QqQ method, were detected by QqTOF-MS. Thirteen pharmaceuticals and two drugs of abuse were also identified in the samples. In practice, the sample preparation proved to be suitable for both techniques and for a wide variety of substances with different polarity. Mutual confirmation and evidence of co-occurrence of several other organic contaminants were the main advantages of the combination of both techniques.     

污水中18种类固醇激素化合物的痕量分析

采用HLB固相萃取柱和超高效液相色谱-串联质谱法(UPLC - MS/MS),在多反应监测(MRM)模式下建立了污水处理厂进出水样中18种类固醇激素(群勃龙、诺龙、雄烯二酮、睾酮、炔诺酮、甲基睾酮、孕酮、康力龙、羟孕酮、泼尼松、氢化泼尼松、六甲强龙、醋酸甲地孕酮、安宫黄体酮、倍他米松、地塞米松、醋酸泼尼松龙和醋酸氢化可...     

Determination of thyroid hormones and their metabolites in tissue using SPE UPLC-tandem MS

A solid‐phase liquid chromatography tandem mass spectrometry (SPE LC‐MS/MS) method was developed to determine thyroid hormones and their metabolites in tissue samples. The separation was achieved using reversed‐phase ultra‐performance liquid chromatography (UPLC); the mass spectrometric detection was achieved by positive electrospray ionization and multiple reaction monitoring. Prior to the UPLC separation a sample cleanup with a cation exchange was performed. ¹³ C₆ labeled internal standards were used for the thyroid hormones and their metabolites. The method was linear over a range from 0.23 to 90 nmol/L for thyroxine and from 0.23 to 9 nmol/L for the metabolites. The lower limit of quantification ranged from 0.98 to 1.73 pg on column. Intra‐ and total assay variation were <10 and <15%, respectively. This method enables us to link thyroid hormone tissue concentrations to local iodothyronine deiodinase expressions, which will enhance our understanding of the regulation of thyroid hormone metabolism on the tissue level. Copyright © 2011 John Wiley & Sons, Ltd.     

Development and validation of a liquid chromatography–tandem mass spectrometry assay for the simultaneous quantitation of microcystin-RR and its metabolites in fish liver

A novel method for identification and quantification of microcystin-RR (MC-RR) and its metabolites (MC-RR-GSH and MC-RR-Cys) in the fish liver was developed and validated. These analytes were simultaneously extracted from fish liver using water containing EDTA with 5% acetic acid, followed by a mixed-mode cation-exchange SPE (Oasis MCX) and subsequently determined by liquid chromatography–electrospray ionization ion trap mass spectrometry (LC–ESI-ITMS). Extraction parameters including volume and pH of eluting solvents, were optimized. Best recoveries were obtained by using 10 mL of 15% ammonia solution in methanol. The mean recoveries at three concentrations (0.2, 1.0, and 5.0 μg g⁻¹ dry weight [DW]) for MC-RR, MC-RR-GSH and MC-RR-Cys were 93.6–99%, 68.1–73.6% and 90.0–95.2%, respectively. Method detection limit (MDL) were 4, 7 and 5 ng g⁻¹ DW for MC-RR, MC-RR-GSH and MC-RR-Cys, respectively. Limits of quantification (LOQs) for MC-RR, MC-RR-GSH and MC-RR-Cys were calculated to be 10, 18 and 13 ng g⁻¹ DW, respectively. Finally, this method was successfully applied to the identification and quantification of MC-RR, MC-RR-GSH and MC-RR-Cys in the liver of bighead carp with acute exposure of MCs.     

Analysis of 70 Environmental Protection Agency priority pharmaceuticals in water by EPA Method 1694

The U.S. Environmental Protection Agency (EPA) Method 1694 for the determination of pharmaceuticals in water recently brought a new challenge for treatment utilities, where pharmaceuticals have been reported in the drinking water of 41-million Americans. This proposed methodology, designed to address this important issue, consists of solid-phase extraction (SPE) followed by liquid chromatography–mass spectrometry (LC/MS–MS) using triple quadrupole. Under the guidelines of Method 1694, a multi-residue method was developed, validated, and applied to wastewater, surface water and drinking water samples for the analysis of 70 pharmaceuticals. Four distinct chromatographic gradients and LC conditions were used according to the polarity and extraction of the different pharmaceuticals. Positive and negative ion electrospray were used with two MRM transitions (a quantifier and a qualifier ion for each compound), which adds extra confirmation not included in the original Method 1694. Finally, we verify, for the first time, EPA Method 1694 on water samples collected in several locations in Colorado, where positive identifications for several pharmaceuticals were found. This study is a valuable indicator of the potential of LC/MS–MS for routine quantitative multi-residue analysis of pharmaceuticals in drinking water and wastewater samples and will make monitoring studies much easier to develop for water utilities across the US, who are currently seeking guidance on analytical methods for pharmaceuticals in their water supplies.     

Quantitative on-line preconcentration-liquid chromatography coupled with tandem mass spectrometry method for the determination of pharmaceutical compounds in water

One of the current environmental issues concerns the presence and fate of pharmaceuticals in water bodies as these compounds may represent a potential environmental problem. The characterization of pharmaceutical contamination requires powerful analytical method able to quantify these pollutants at very low concentration (few ng L⁻¹).     

Analysis of chlormequat and mepiquat by hydrophilic interaction chromatography coupled to tandem mass spectrometry in food samples

In this work a LC–MS/MS method for the determination of two quaternary ammonium growth regulators (chlormequat and mepiquat) in food is reported. The separation was based on hydrophilic interaction liquid chromatography (HILIC) without the use of ion-pair reagents. A gradient elution of acetonitrile and formic acid/ammonium formate buffer from 60 to 40% acetonitrile was enough to achieve a resolution >1.5 in less than 4.0 min. The HILIC system was coupled to a triple quadrupole mass spectrometer equipped with a heated electrospray probe (H-ESI) providing sub-pg LODs in SRM mode. A straightforward sample treatment (SPE C18 clean-up) was enough to provide MLODs at low ppb levels when analysing a range of food samples that covered different kinds of matrices such as fresh fruit, vegetables, fruit juices, baby food, bread, coffee and beer. Chlormequat was found in seven samples (0.8–126 ng/g) but mepiquat was only detected in bread and coffee samples (0.9–166 ng/g).     

Analysis and occurrence of seven artificial sweeteners in German waste water and surface water and in soil aquifer treatment (SAT)

A method for the simultaneous determination of seven commonly used artificial sweeteners in water is presented. The analytes were extracted by solid phase extraction using Bakerbond SDB 1 cartridges at pH 3 and analyzed by liquid chromatography electrospray ionization tandem mass spectrometry in negative ionization mode. Ionization was enhanced by post-column addition of the alkaline modifier Tris(hydroxymethyl)amino methane. Except for aspartame and neohesperidin dihydrochalcone, recoveries were higher than 75% in potable water with comparable results for surface water. Matrix effects due to reduced extraction yields in undiluted waste water were negligible for aspartame and neotame but considerable for the other compounds. The widespread distribution of acesulfame, saccharin, cyclamate, and sucralose in the aquatic environment could be proven. Concentrations in two influents of German sewage treatment plants (STPs) were up to 190 μg/L for cyclamate, about 40 μg/L for acesulfame and saccharin, and less than 1 μg/L for sucralose. Removal in the STPs was limited for acesulfame and sucralose and >94% for saccharin and cyclamate. The persistence of some artificial sweeteners during soil aquifer treatment was demonstrated and confirmed their environmental relevance. The use of sucralose and acesulfame as tracers for anthropogenic contamination is conceivable. In German surface waters, acesulfame was the predominant artificial sweetener with concentrations exceeding 2 μg/L. Other sweeteners were detected up to several hundred nanograms per liter in the order saccharin ≈ cyclamate > sucralose. Figure Some artificial sweeteners are excreted unchanged and in particular acesulfame is a perfect tracer for municipal waste water Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Multi-method for the determination of antibiotics of different substance groups in milk and validation in accordance with Commission Decision 2002/657/EC

The presented method is able to analyse 47 substances of the antibiotic groups tetracyclines, quinolones, macrolides, sulfonamides, diamino-pyrimidine derivatives and lincosamides simultaneously in a single analytical run. Applying an in-house validation concept, the validation of the multi-method was successfully accomplished with a low number of experiments. Each substance was validated at least at the concentrations 0.5, 1.0 and 1.5 MRL (maximum residue limit), or respectively, at concentrations as low as possible for substances without MRL. The calculated relevant validation parameters, e.g. the decision limit CCα, the detection capability CCβ, the repeatability, the within-laboratory reproducibility and the recovery, are in an acceptable range and in compliance with the requirements of Commission Decision 2002/657/EC. A proficiency test and the implementation of the method by other laboratories were performed successfully.     

Method validation of microcystins in water and tissue by enhanced liquid chromatography tandem mass spectrometry

A liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI–MS/MS) method has been developed and validated to identify and quantify trace levels of cyanotoxins or microcystins (MC) in water, bivalves and fish tissue with enhanced sensitivity and specificity. The method enables confirmation and quantification of six MCs (MC-LA, LF, LR, LW, RR and YR) with a single chromatographic run. The applied chromatography also allows determination of certain MC metabolites (Desmethyl-LR and -RR). By using LC-ESI–MS/MS in multiple reaction monitoring (MRM) mode, the limit of detection and quantitation for the microcystins studied, were determined to be between 0.2 and 1 pg on column (5:1 S/N ratio). These values are below the 2 pg detection limits found in the available literature.     

Trace analysis of isothiazolinones in water samples by large-volume direct injection liquid chromatography tandem mass spectrometry

Isothiazolinones are used as preservatives, biocides and disinfectants in a variety of industrial and domestic applications. Some of the isothiazolinones are difficult to isolate from water due their high polarity. A sensitive and selective analytical method was developed and optimized for the determination of sub-μg/L levels of three isothiazolinones in water samples. Three isothiazolinones are described in this paper: 2-methyl-3-isothiazolinone, 5-chloro-2-methyl-3-isothiazolinone and 4,5-dichloro-2-methyl-3-isothiazolinone. The analytical method involves a robust large-volume direct on-column loop injection of 2 mL on an Aqua ODS HPLC column and tandem MS detection (HPLC–MS/MS). After filtration, samples are directly injected without further pretreatment. Detection limits of the individual target compounds were between 0.03 and 0.1 μg/L employing Multi-Reaction Monitoring (MRM) mass spectrometry. Based on the constant ratio of two selected product-ions together with the retention time, the identification is very selective and quantification is reliable. The method was successfully applied to real samples of membrane flushings, drinking water, surface waters and waste water. Additional investigations showed the instability of the isothiazolinones in river- and waste water. Preservation of river water and waste water samples with sodium azide (NaN₃) promotes the stability of the isothiazolines in solution. In membrane flushings, waste water, surface waters and drinking water, levels of the three isothiazolinones were all below the limit of detection. In effluents of households containing washings from normal shampoo use, isothiazolinones could be detected.     

Pharmaceutical determination in surface and wastewaters using high-performance liquid chromatography-(electrospray)-mass spectrometry

A method was developed to determine 11 pharmaceutical compounds in water samples. The method uses SPE and HPLC coupled to MS (LC/MS) using ESI in both positive and negative modes. Three different sorbents were compared for the extraction of analytes from river and sewage treatment plant (STP) waters and OASIS HLB provided the best results. For the solid-phase extraction of 500 mL of river water samples, the recoveries were between 41 and 101% with the exception of acetaminophen, salicylic acid and naproxen. The LODs were between 3 and 5 ng/L for all the compounds, except naproxen which had an LOD of 15 ng/L. Acetaminophen, caffeine, carbamazepine, bezafibrate and ibuprofen were found in three of the tested river samples at ng/L levels and among them, the highest values were for caffeine and bezafibrate with 305 and 363 ng/L, respectively. For the influent and effluent water samples of the STP, volumes of 100 and 250 mL were used, respectively, to obtain acceptable recoveries. All the compounds showed recoveries between 33 and 91% for effluent samples and 33-72% for influent samples, with the exception of acetaminophen, salicylic acid and bezafibrate, which had lower recoveries. The method developed enabled pharmaceuticals in the influent and effluent sewage waters to be determined in five campaigns carried out between February 2004 and June 2005. Several pharmaceuticals were found in the influent samples: for instance, maximum concentrations of ibuprofen and caffeine were 6 and 40 microg/L, respectively.     

超高压液相色谱-串级质谱分析渔业水中7种激素药物

建立了同时测定渔业养殖水中氢化可的松、泼尼松、醋酸可的松、睾酮、甲睾酮、黄体酮及苯丙酸诺龙等7种激素残留药物的超高压液相色谱-电喷雾电离串联质谱(UPLC-ESI-MS/MS)分析方法.水样用HLB固相萃取柱净化、浓缩后,洗脱液经氮气吹干,残渣用乙腈-水(V∶V=1∶1)溶解,以乙腈和0.1％甲酸水溶液为流动相,经ZORBAXSB-C18色谱柱分离后进行LC-MS/MS多反应检测模式作定性定量分析.方法在0.5～40μggL或1～40μg/L范围具有良好的线性,相关系数大于0.997,检出限(S/N=3)为0.03～0.3μg/L,平均回收率为74.8％～113.0％,相对标准偏差为4.0％～16％.方法适用于渔业养殖水中7种激素的检测分析.     

液相色谱-串联质谱法快速测定婴幼儿配方奶粉中39种激素残留量

建立了液相色谱-串联四极杆质谱同时测定婴幼儿配方奶粉中17种糖皮质激素、11种孕激素、3种雄性激素和8种雌激素残留的快速确证方法。采用乙腈提取奶粉中待测组分,提取液经冷冻离心与正己烷除脂、亲水-亲脂平衡固相萃取柱净化、甲醇洗脱。分别在正、负电喷雾离子化多反应监测模式下检测39种激素。正离子模式下的流动相为乙腈-0.1%甲酸,色谱柱为普通硅胶基质的C18柱;负离子模式下的流动相为乙腈-0.1%氨水,色谱柱为能耐受宽pH范围的超高效C18柱。在该优化条件下,39种激素定量限(S/N≥10)为0.02～5 μg/kg,方法回收率为59.5%～117.9%,相对标准偏差(RSD)为6.4%～16.3%。经测定多种市售婴幼儿配方奶粉,表明该方法操作简单、测定结果准确,可用于婴幼儿配方奶粉中多种内源性与化学合成类激素残留的快速测定。     

On-line solid-phase extraction of large-volume injections coupled to liquid chromatography-tandem mass spectrometry for the quantitation and confirmation of 14 selected trace organic contaminants in drinking and surface water

We describe the development and validation of an on-line solid-phase extraction of large-volume injections coupled to liquid chromatography-tandem mass spectrometry method for the simultaneous quantitation and confirmation of 14 selected trace organic contaminants in drinking and surface water. Selected compounds were: anti-infectives (clarithromycin, sulfamethoxazole and trimethoprim), an anticonvulsant (carbamazepine) and its transformation product 10,11-dihydrocarbamazepine, an antihypertensive (enalapril), antineoplastics (cyclophosphamide and methotrexate), herbicides (atrazine, cyanazine, and simazine) and two of their transformation products (deethylatrazine and deisopropylatrazine) and an antiseptic (triclocarban). The breakthrough volume determinations showed that out of all the investigated sorbents, the Strata-X on-line solid-phase extraction column showed the best performance. The method used a load volume of 10.0 mL and was validated using the corresponding matrices, yielding for most compounds, R² > 0.99. Extraction recoveries ranged from 60 to 109%. The intra- and inter-day precision were <14 and <16%, respectively. The method detection limits ranged from 0.6 to 6 ng L⁻¹. Matrix effects were in general low. The performance of the on-line method was demonstrated with the analysis of real water samples. The application of alternative techniques of confirmation was also explored using accurate mass measurements on a time-of-flight mass spectrometer and the data-dependent reverse energy ramp scan on a triple quadrupole.     

Multi-residue analytical method for human pharmaceuticals and synthetic hormones in river water and sewage effluents by solid-phase extraction and liquid chromatography–tandem mass spectrometry

Pollutants such as human pharmaceuticals and synthetic hormones that are not covered by environmental legislation have increasingly become important emerging aquatic contaminants. This paper reports the development of a sensitive and selective multi-residue method for simultaneous determination and quantification of 23 pharmaceuticals and synthetic hormones from different therapeutic classes in water samples. Target pharmaceuticals include anti-diabetic, antihypertensive, hypolipidemic agents, β2-adrenergic receptor agonist, antihistamine, analgesic and sex hormones. The developed method is based on solid phase extraction (SPE) followed by instrumental analysis using liquid chromatography-electrospray ionization-tandem mass spectrometry (LC–ESI-MS/MS) with 30 min total run time. River water samples (150 mL) and (sewage treatment plant) STP effluents (100 mL) adjusted to pH 2, were loaded into MCX (3 cm³, 60 mg) cartridge and eluted with four different reagents for maximum recovery. Quantification was achieved by using eight isotopically labeled internal standards (I.S.) that effectively correct for losses during sample preparation and matrix effects during LC–ESI-MS/MS analysis. Good recoveries higher than 70% were obtained for most of target analytes in all matrices. Method detection limit (MDL) ranged from 0.2 to 281 ng/L. The developed method was applied to determine the levels of target analytes in various samples, including river water and STP effluents. Among the tested emerging pollutants, chlorothiazide was found at the highest level, with concentrations reaching up to 865 ng/L in STP effluent, and 182 ng/L in river water.     

A new on-line solid phase extraction high performance liquid chromatography tandem mass spectrometry method to study the sun light photodegradation of mono-chloroanilines in river water

The study investigates the natural photodegradation pathway of mono-chloroanilines in river waters, with the aim to identify the predominant photoproducts formed. At this purpose a new sensitive on-line SPE HPLC–MS/MS method has been developed with LOQ values equal or lower than the legal threshold concentration levels allowed for mono-chloroanilines in waters. The degradation processes of o-, m- and p-chloroaniline have been investigated subjecting their solutions, prepared both in ultrapure and in river water, to sun light irradiation simulated by a solar box system. The SPE HPLC–MS/MS methodology allowed to evaluate the degradation kinetics, to identify the predominant photodegradation products and to propose the chemical structures. Two photoproducts (aniline and 3-aminophenol), for which standards are available, have also been quantified.     

Development and application of methods using SPE,HPLC-DAD,LC-ESI-MS/MS and GFAAS for the determination of herbicides and metals in surface and drinking water

A preliminary study of the pollution in surface and drinking waters caused by herbicides and metals in the Municipal Water Supply System (CORSAN) in Rio Grande city, RS, Brazil, is reported. The occurrence of 5 herbicides and 9 metals was studied in surface and drinking water through the analysis of 2 sampling spots at CORSAN. The analytical determination was performed by solid-phase extraction (SPE), high performance liquid chromatography-photodiode array detection (HPLC-DAD) and liquid chromatography coupled to electrospray ionisation tandem mass spectrometry (LC-ESI-MS/MS) for herbicides, and graphite furnace atomic absorption spectrometry (GFAAS) for metals. The concentrations of herbicides in the surface water were very low; however, the herbicide clomazone was detected in more than 50% of the samples analysed in concentration exceeding 1.0?µg L^?1. The concentration of metals was below the Maximum Contaminant Level (MCL) set by the Brazilian regulation.     

Development and application of a UHPLC‐MS/MS method for the simultaneous determination of 17 steroidal hormones in equine serum

A new, fast and simple analytical method that is able to identify and quantify simultaneously 17 steroid hormones and metabolites (pregnenolone, 17‐OH‐pregnenolone, progesterone, 17‐OH‐progesterone, androsterone, androstenedione, dehydroepiandrosterone, dehydroepiandrosterone sulfate, testosterone, cortisol, corticosterone, aldosterone, 11‐deoxycortisol, 11‐deoxycorticosterone, dihydrotestosterone, estrone and estradiol) has been developed in equine serum using the ultra‐high‐performance liquid chromatography–tandem mass spectrometry technique. A total of 400 µl of sample was deproteinized with 1000 µl of acetonitrile, evaporated, restored with 50 µl of a solution of 25% methanol and injected in ultra‐high‐performance liquid chromatography–tandem mass spectrometry triple quadrupole. The recovery percentage obtained by spiking the matrix at two different concentrations with a standard mixture of steroid hormones was in all cases higher than 85.60% and with the percentage of coefficient of variation lower than 8.37%. The range of the correlation coefficients of the calibration curves of the analyzed compounds was 0.9922–0.9986, and the limits of detection and limits of quantification were in the range of 0.002–2 and 0.0055–5.5 ng ml⁻¹, respectively. The detected limit of quantification for testosterone (i.e. 50 pg ml⁻¹) is twofold lower with respect to its threshold admitted in geldings plasma (100 pg ml⁻¹ free testosterone). The high sensitivity and the quantitative aspect of the method permitted to detect most of the steroids in equine serum. Once validated, the method was used to quantify 17 steroid hormones in mare, stallion and gelding serum samples. The main steroids detected were corticosterone (range 37.25–51.26 ng ml⁻¹) and cortisol (range 32.57–52.24 ng ml⁻¹), followed by 17‐OH‐pregnenolone, dihydrotestosterone and pregnenolone. Copyright © 2016 John Wiley & Sons, Ltd.     

Analysis of Pesticides in Water Samples Using GC-ECD and GC-MS/MS Techniques

Abstract

A pesticide multiresidue method for determining dichlorvos, naled. lindane, diazinon. chlorpyri-fos-methyl, dichlofluanid, chlorpyrifos, folpet, α– and β-endosulfan, endosulfan-sulphate, fen-propathrin and acrinathrin in water samples at the levels required by the EEC Drinking Waters Directive has been developed. The pesticides were selected among the most used during die last 20 years in Almeria (Spain), where there is a high agricultural activity. Solid Phase Extraction (SPE) was selected as extraction method after being compared with Liquid-Liquid Extraction (LLE). Moreover, different gas chromatographic detectors (Electron Capture Detector, ECD; Mass Spectrometer, MS; Tandem Mass Spectrometer, MS/MS) were compared. The best results of repeatability and sensitivity were obtained for ECD and MS/MS.