Dioxomolybdenum(VI) complexes containing 1-alkyl-2-ethyl-3-hydroxy-4-pyridin-4(1H)-ones

Dioxomolybdenum(VI) complexes derived from ethyl maltol (2-ethyl-3-hydroxy-4-pyrone) and 1-alkyl-2-ethyl-3-hydroxy-4-pyridin-4(1H)-ones have been prepared and characterized using physical methods including ¹H- and ¹³C-n.m.r. spectroscopy, i.r., elemental analysis, and X-ray diffraction for the pyrone and 3-methylpyridine pyridinone derivatives. The octahedral complexes have the general formula cis-MoO₂L₂ where L = the deprotonated pyrone or pyridinone ligand.     

Dioxomolybdenum(VI) complexes containing N-heterocyclic carbenes

Compound MoO₂Cl₂(THF)₂ reacts with two equivalents of 1,3-dialkyl substituted 4,5-dimethylimidazol-2-ylidenes to give the dioxomolybdenum(VI) complexes MoO₂Cl₂(L^R)₂ [R = Me (1), i-Pr (2)]. Treatment of MoO₂Cl₂(THF)₂ with one equivalent of the N-heterocyclic carbenes L^Me, L^i-Pr and ^C1L^n-Bu (L^Me = 1,3,4,5-tetramethylimidazol-2-ylidene, L^i-Pr = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene, and ^C1L^n-Bu = 1,3-dibutyl-4,5-dichloroimidazol-2-ylidene) affords the monocarbene adducts MoO₂Cl₂(L^R) [R = Me (3), i-Pr (4)] and MoO₂Cl₂(^C1L^n-Bu) (5), respectively. Decomposition of complexes 1-5 affords a molybdenum oxychloride anion [Mo₂O₅Cl₄]²⁻ as an imidazolium salt.     

Dioxomolybdenum(VI) and dioxotungsten(VI) complexes supported by an amido ligand

Stepwise addition of one equivalent of n-butyllithium and trimethylsilyl chloride to 2-tert-butylmercaptoaniline affords the new ligand 1-(Me3SiNH)-2-(t-BuS)C6H4 (LH), that reacts with one equivalent of butyllithium to its lithium salt LLi. Dioxodichloromolybdenum [MoO2Cl2] and dioxodichlorotungsten dimethoxyethane [WO2Cl2(dme)] react in tetrahydrofuran solution at low temperature with two equivalents LLi to monomeric dioxomolybdenum(VI) [MoO2L2] (1) and dioxotungsten(VI) complex [WO2L2] (2) employing two bidentate amido thioether ligands. The crystallographic determination of the molecular structures of 1 and 2 show evidence for M...S contacts. The reaction of [MoO2Cl2] with LLi in tetrahydrofuran solution at room temperature leads next to 1 to two compounds where silyl group migration from nitrogen to oxygen atoms occurs forming [Mo(=NL')2(OSiMe)2] (3) and [Mo(=NL')2(OSiMe3)L] (4, L' = N-2-t-BuSC6H4) as determined by NMR spectroscopy. Compound 4 was isolated in low yield and its molecular structure determined by X-ray crystallography. Higher yields of a bisimido complex can be obtained by the direct reaction of one equivalent of LLi with [Mo(NAr)2Cl2(dme)] (Ar = 2,6-Me2C6H4) forming [Mo(NAr)2LCl] (5).     

Dioxomolybdenum(VI) complexes with substituted salicylidene-2-furfurylimines: the crystal and molecular structure of 4-hydroxysalicylidene-2-furfurylimine

4-Hydroxysalicylidene-2-furfurylimine HL⁴ and complex МоО₂Cl₂ · 2HL⁴ were prepared. The HL⁴ structure was determined by X-ray crystallography. The two crystallographically nonequivalent molecules have similar structures and are in zwitterionic form.     

Dioxomolybdenum(VI) complexes as catalysts for the hydrosilylation of aldehydes and ketones

The dioxomolybdenum(VI) complexes [MoO2Cl2] (1), [MoO2(acac)2] (2), [MoO2(S2CNEt2)2] (3), [CpMoO2Cl] (4), [MoO2(mes)2] (5) and the polymeric organotin-oxomolybdates [(R3Sn)2MoO4] [R = n-Bu (6), t-Bu (7), Me (8)] were examined as catalysts for the hydrosilylation of aldehydes and ketones with dimethylphenylsilane. Of these, [MoO2Cl2] (1) was the most efficient catalyst, affording quantitative yields of the corresponding silylated ethers at room temperature in acetonitrile. Complexes 2, 4-8 also catalyzed the same reaction but required heating at 80 degrees C and longer reaction times compared with 1. Compound 3 is inactive. The wide scope of molybdenum oxide-mediated hydrosilylation was established with a variety of aldehydes and ketones. Counter intuitively, the activity of is 1 highest in NCMe. In the absence of a carbonyl substrate, [MoO2Cl2(NCBu(t))] (10) reacts with HSiMe2Ph affording [MoO(OSiMe2Ph)Cl2]2 (11) which has been fully characterized by NMR and IR spectroscopy, elemental analyses and mass spectrometry. Addition of radical scavengers strongly slows down the [MoO2Cl2]-based hydrosilylation suggesting the intermediacy of oxygen-centered radicals.     

Dioxomolybdenum(VI) complexes of dibasic tridentate Schiff bases having the HO-N-OH donor system

Summary The synthesis and structural features of some dibasictridentate Schiff base complexes of dioxomolybdenum of the type MoO₂L and MoO₂L·DMSO are described. The ligands, LH₂ were derived by the condensation of 2-hydroxy-1-naphthaldehyde, 2,4-pentanedione and 2-hydroxyacetophenone with glycine or -alanine. The new complexes were characterized by elemental analysis, conductance, molecular weight and magnetic measurements. Based on i.r.,¹H n.m.r.,¹³C n.m.r. studies, a pseudooctahedral and octahedral structure is proposed for MoO₂L and MoO₂L·DMSO respectively.     

Crystal Structure of Dioxomolybdenum(VI) Pyrazinecarbohydroximate Tetrahydrate

The crystal structure of a complex of pyrazinecarbohydroxamic acid (PHA) with Mo(VI) has been studied by X-ray diffraction analysis. The PHA molecule enters the complex composition as the enole tautomeric form. The branched intermolecular bonds form a strong three-dimensional framework with cavities filled with water molecules.     

双二茂铁基醛亚胺钼（ＶＩ）配合物的合成及催化性能

通过二茂铁甲醛与丙二胺反应得到双二茂铁基醛亚胺配体N~1,N~3-双二茂铁亚甲基丙烷-1, 3-二胺(FcMP), FcMP与MoO_2Cl_2(THF)_2的四氢呋喃溶液作用, 合成了双二茂铁基醛亚胺钼(VI)配合物. 以配合物为催化剂, 叔丁基过氧化氢为氧化剂, 分别以苯乙烯和环己烯为底物, 考察了温度、时间、催化剂量及溶剂对于烯烃均相环氧化反应的催化性能的影响. 结果表明, 在最优实验条件下, 反应12 h, 环己烯的转化率为88%, 环氧环己烷的选择性为98%;苯乙烯的转化率为84%, 氧化苯乙烯的选择性为76%. 催化剂经简单分离可回收使用, 且催化活性基本保持不变. 同时对环氧化反应的机理进行了初步探讨.     

Dioxomolybdenum(VI) complexes of hydrazone phenolate ligands - syntheses and activities in catalytic oxidation reactions

The new cis-dioxomolybdenum (VI) complexes [MoO₂(L²)(H₂O)] (2) and [MoO₂(L³)(H₂O)] (3) containing the tridentate hydrazone-based ligands (H₂L² = N'-(3,5-di-tert-butyl-2-hydroxybenzylidene)-4-methylbenzohydrazide and H₂L³ = N'-(2-hydroxybenzylidene)-2-(hydroxyimino)propanehydrazide) have been synthesized and characterized via IR, ¹H and ¹³C NMR spectroscopy, mass spectrometry, and single crystal X-ray diffraction analysis. The catalytic activities of complexes 2 and 3, and the analogous known complex [MoO₂(L¹)(H₂O)] (1) (H₂L¹ = N'-(2-hydroxybenzylidene)-4-methylbenzohydrazide) have been evaluated for various oxidation reactions, viz. oxygen atom transfer from dimethyl sulfoxide to triphenylphosphine, sulfoxidation of methyl-p-tolylsulfide or epoxidation of different alkenes using tert-butyl hydroperoxide as terminal oxidant. The catalytic activities were found to be comparable for all three complexes, but complexes 1 and 3 showed better catalytic performances than complex 2, which contains a more sterically demanding ligand than the other two complexes.     

Dioxomolybdenum(VI) complexes of hydrazones of two substituted salicylaldehydes: synthesis,structures, and catalytic properties

Dioxomolybdenum(VI) complexes [MoO₂L(CH₃OH)] (L?=?L¹?=?N′-(2-hydroxy-5nitrobenzylidene)isonicotinoylhydrazide for 1, L?=?L²?=?N′-(4-diethylamino-2-hydroxybenzylidene)-4-methylbenzohydrazide for 2) were prepared and structurally characterized by physicochemical and spectroscopic methods and single-crystal X-ray determination. Mo in the complexes is octahedrally coordinated. Both complexes show effective catalysis in oxidation of cyclohexene, vinylbenzene, 1-butylene, and 1-pentene, to their corresponding epoxides. In general, high epoxide yields (over 89%) and selectivity (100%) were observed for all aliphatic and aromatic substrates.     

Dioxomolybdenum(VI) Complexes with New Enantiomerically Pure Amino Diol Ligands

(R)-Phenylglycinol is shown to be an efficient building block for the synthesis of chiral amino diols in pure diastereomeric form by epoxide ring-opening reactions. The reaction with rac-trans-stilbene oxide gives [HOCH(2)-(R)-PhCH]NH[(S)-PhCH-(R)-PhCHOH] [2(R)-3(R)-4(S)-HNO(2)H(2)] in 32% yield, which can be methylated at nitrogen to give enantiomerically pure [HOCH(2)-(R)-PhCH]NCH(3)[(S)-PhCH-(R)-PhCHOH] [2(R)-3(R)-4(S)-MeNO(2)H(2)]. These amino diol ligands have been used to prepare chiral dioxomolybdenyl complexes of the formula N(R)-2(R)-3(R)-4(S)-(HNO(2))MoO(2) (1) and N(R)-2(R)-3(R)-4(S)-(MeNO(2))MoO(2) (2). The absolute configuration at each stereocenter in the Mo(VI) complexes has been established by (1)H NOESY spectroscopy. The configuration determined for 1 has been confirmed by an X-ray analysis. Crystal data: orthorhombic P2(1)2(1)2(1), a =7.620(3), b = 13.589(2), c = 20.339(3) ?, Z = 4, R = 0.0336. The structure consists of a polymeric chain of N(R)-2(R)-3(R)-4(S)-(HNO(2))MoO(2) molecules connected through unsymmetrical Mo=O --> Mo bridges. Each metal center is coordinated in a distorted octahedral geometry by a cis dioxo unit and by two trans alkoxo atoms. The coordination polyhedron is completed by a nitrogen atom and by a bridging oxo oxygen atom from an adjacent molecule. Compound 2 catalyzes the oxidation of PPh(3) to OPPh(3) by DMSO through a mechanism that involves the intermediacy of a Mo(IV) species.     

Dioxomolybdenum(VI) and dioxotungsten(VI) complexes: efficient catalytic activity for crosslinking reaction in ethylene‐vinyl acetate copolymer/alkoxysilane composites

The catalytic performances of several bis(acetylacetonato)metal complexes [Cu(acac)₂, Zn(acac)₂, TiO(acac)₂, VO(acac)₂, MoO₂(acac)₂, and WO₂(acac)₂] were investigated for the crosslinking reaction via transesterifications in the ethylene‐vinyl acetate copolymer/tetraethoxysilane (EVA/TEOS) composite system by means of dynamic attenuated total reflectance Fourier transform infrared, solvent swelling, and solid‐state ²⁹Si cross polarization/magic angle spinning nuclear magnetic resonance techniques. Results of the kinetic examination revealed that MoO₂(acac)₂ and WO₂(acac)₂ exhibited a higher catalytic activity than di‐n‐butyltin(IV) oxide, which is a catalyst most commonly used for the transesterification process in polymer system, but has a toxic effect on the environmental health. And furthermore, the crosslink density and final siloxane network structure of crosslinked EVA/TEOS composites are found to be greatly correlated with the catalyst used. On the basis of the S_N2‐Si pathway, a plausible catalytic mechanism of MoO₂(acac)₂ and WO₂(acac)₂ was proposed for the crosslinking reaction via transesterifications of the vinyl acetate moieties in EVA backbone with the ethoxysilane groups in one TEOS molecule. The findings in this study may fill the blank in the high performance and environmentally friendly catalyst in the field of the crosslinking reactions in polymer system and provide useful clue for other transesterifications. Copyright © 2015 John Wiley & Sons, Ltd.     

Dioxomolybdenum(VI) complexes with pyrazole based aryloxide ligands: synthesis, characterization and application in epoxidation of olefins

Synthesis, characterization, and epoxidation chemistry of four new dioxomolybdenum(VI) complexes [MoO(2)(L)(2)] (1-4) with aryloxide-pyrazole ligands L = L1-L4 is described. Catalysts 1-4 are air and moisture stable and easy to synthesize in only three steps in good yields. All four complexes are coordinated by the two bidentate ligands in an asymmetric fashion with one phenoxide and one pyrazole being trans to oxo atoms, respectively. This is in contrast to the structure found for the related aryloxide-oxazoline coordinated Mo(VI) dioxo complex 5. This was confirmed by the determination of the molecular structures of complexes 1-3 by X-ray diffraction analyses. Compounds 1-4 show high catalytic activities in the epoxidation of various olefins. Cyclooctene (S1) is converted to its epoxide with high activity, whereas the epoxidation of styrene (S2) is unselective. Internal olefins (S3 and S4) are also acceptable substrates, as well as the very challenging olefin 1-octene (S5). Catalyst loading can be reduced to 0.02 mol % and the catalyst can be recycled up to ten times without significant loss of activity. Supportive DFT calculations have been carried out in order to obtain deeper insights into the electronic situation around the Mo atom.     

cis‐Dioxomolybdenum(VI) complexes with unsymmetric linear tetradentate ligands: syntheses,structures and bromoperoxidase activities

Reactions of [MoO₂(acetylacetonate)₂], 2‐((2‐(2‐hydroxyethylamino)ethylamino)methyl)‐4‐R‐phenols (H₂Lⁿ, n = 1–5 for R = H, Me, OMe, Cl and Br, respectively) and KOH in 1:1:2 mole ratio in methanol afford a series of complexes having the general formula cis‐[MoO₂(Lⁿ)] ( 1 , 2 , 3 , 4 , 5 ) in 81–86% yields. The complexes have been characterized using elemental analysis, spectroscopy (infrared, UV–visible, and ¹H NMR, ¹³C NMR and ¹³C‐DEPT NMR) and electrochemical measurements. The molecular structures of 1 , 2 , 3 , 4 have been determined using single‐crystal X‐ray crystallography. In each of 1 , 2 , 3 , 4 , the ONNO‐donor 6,5,5‐membered fused chelate rings forming (Lⁿ)²⁻ and the two mutually cis oxo groups assemble a distorted octahedral N₂O₄ coordination sphere around the metal centre. In the crystal lattice, each of 1 , 2 , 3 , 4 forms a one‐dimensional infinite chain structure via intermolecular N  H⋅⋅⋅O hydrogen bonding interactions. In cyclic voltammograms, the diamagnetic complexes display an irreversible metal‐centred reduction in the potential range −0.73 to −0.88 V (vs Ag/AgCl). The physicochemical data are consistent with a very similar gross molecular structure for all of 1 , 2 , 3 , 4 , 5 . All the complexes exhibit decent bromoperoxidase activities and are also able to effectively catalyse benzoin and methyl(phenyl)sulfide oxidation reactions. Copyright © 2015 John Wiley & Sons, Ltd.     

Dioxomolybdenum(VI) complexes derived from tridentate hydrazone ligands: Synthesis,characterization, crystal structures,and antibacterial activity

A pair of structurally similar dioxomolybdenum(VI) complexes with general formula [MoO₂(L)(MeOH)] (L = L¹ = N’-(3,5-dibromo-2-hydroxybenzylidene)-2-hydroxybenzohydrazide for I, L = L² = N’-(3,5-dibromo-2-hydroxybenzylidene)-2-methylbenzohydrazide for II), have been prepared and characterized by elemental analysis, IR spectra, and single crystal X-ray determination (CIF files CCDC nos. 917823 (I) and 917824 (II)). The hydrazone ligands coordinate to the Mo atoms through phenolate oxygen, imine nitrogen, and enolic oxygen atoms. The Mo atom in each complex is six-coordinated in an octahedral geometry. The crystals of the complexes are stabilized by hydrogen bonds. The complexes and the ligands were assayed for antibacterial activities against three Gram-positive bacterial strains (B. subtilis, S. aureus, and S. faecalis) and three Gram-negative bacterial strains (E. coli, P. aeruginosa, and E. cloacae) by MTT method. As a result, the complexes showed effective antimicrobial activity against the microorganisms tested.     

Gas-phase coordination complexes of U(VI)O2(2+), Np(VI)O2(2+), and Pu(VI)O2(2+) with dimethylformamide

Electrospray ionization of actinyl perchlorate solutions in H₂O with 5% by volume of dimethylformamide (DMF) produced the isolatable gas-phase complexes, [An^VIO₂(DMF)₃(H₂O)]²⁺ and [An^VIO₂(DMF)₄]²⁺, where An = U, Np, and Pu. Collision-induced dissociation confirmed the composition of the dipositive coordination complexes, and produced doubly- and singly-charged fragment ions. The fragmentation products reveal differences in underlying chemistries of uranyl, neptunyl, and plutonyl, including the lower stability of Np(VI) and Pu(VI) compared with U(VI).     

Synthesis,Crystal Structures,and Catalytic Properties of Dioxomolybdenum(VI) Complexes Derived from 4-Chloro-2-{[4-Diethylamino-2-Hydroxybenzylidene]amino}phenol

Russian Journal of Coordination Chemistry - Two new dioxomolybdenum(VI) complexes, [MoO2L(EtOH)] (I) and [MoO2L(Sal)] (II), where L is the dianionic form of...