Buoyancy-driven convection of water near its density maximum with time periodic partially active vertical walls

The effect of density inversion on transient natural convection heat transfer of cold water in a square cavity with partially active vertical walls is studied numerically. The governing equations are solved by control volume method with power law scheme. In the hot location the temperature is varied sinusoidally and in the cold location uniform temperature is maintained. Nine different positions of the active zones are considered. Results are discussed for various values of the amplitude, period and different Grashof numbers and presented graphically in the form of isotherms, streamlines, mid-height velocity profile and average Nusselt number. It is found that density inversion of water affects natural convection flow and heat transfer. Heat transfer rate is enhanced upto 80% when the heating location is in the middle of the hot wall.     

Free convective heat transfer and criterion of onset of free convection in a horizontal melt layer of ice heated by upper rigid surface

An experimental and analytical investigation pertaining to the effect of density inversion of water on the free convective heat transfer and the onset of free convection in a horizontal melt layer of ice heated by upper rigid surface is carried out. Temperatures of the upper surface are varied from 1°C to 15°C, with Rayleigh number ranging from 2 × 10² to 1 × 10⁵. From the present study, it can be demonstrated both experimentally and analytically that the density inversion of water plays an influential role in such a melt layer and the onset of free convection and the free convective heat transfer are considerably affected by the temperature of upper rigid surface T₂, in the case of T₂ ≤ 8° C, unlike the results obtained for common fluids without density inversion.     

Heat transfer by conduction,natural convection and radiation across a rectangular cellular structure

This paper describes results on the effects of wall conduction and radiation heat exchange among surfaces on laminar natural convection heat transfer in a two-dimensional rectangular cavity modelling a cellular structure. Parametric heat transfer calculations have been performed, and numerical results are presented in graphical and tabular form. Local and average Nusselt numbers along the cavity walls are reported for a range of parameters of physical interest. The findings suggest that the local or the average Nusselt number is one of many parameters that control conjugate heat transfer problems. The results indicate that natural convection heat transfer in the cavity is reduced by heat conduction in the walls and radiation exchange among surfaces. The results obtaibed for the total heat transfer rate through the system using the two-dimensional model are compared with those based on a one-dimensional model.     

Natural convection flow of water near its density maximum in a rectangular enclosure having isothermal walls with heat generation

We consider unsteady laminar natural convection flow of water subject to density inversion in a rectangular cavity formed by isothermal vertical walls with internal heat generation. The top and bottom horizontal walls are considered to be adiabatic, whereas the temperature of the left vertical wall is assumed to be greater than that of the right vertical wall. The equations are non-dimensionalized and are solved numerically by an upwind finite difference method together with a successive over-relaxation (SOR) technique. The effects of both heat generation and variations in the aspect ratio on the streamlines, isotherms and the rate of heat transfer from the walls of the enclosure are presented. Investigations are performed for water taking Prandtl number to be Pr=11.58 and the Rayleigh number to be Ra=10⁵.     

Lattice Boltzmann simulation of natural convection in open end cavity with inclined hot wall

Natural convection in an open end cavity with a hot inclined wall is simulated based on the lattice Boltzmann method (LBM). The physics of flow and energy transfer in open end cavities are addressed when the hot wall is inclined. The combination of the two topics (open cavity and inclined walls) is the main novelty of the present study. The effects of the angle of the hot inclined wall on the flow field and heat transfer are thoroughly investigated. The Prandtl number is fixed to 0.71 (air). The Rayleigh number and the angle of the hot inclined wall are varied in the range of 10⁴ to 10⁶ and 60? to 85?, respectively. The results are presented for two different aspect ratios, i.e., A = 1 and 2. The results obtained with the LBM are also compared with those of the finite volume method (FVM). The predicted results of the LBM conform to those of the FVM. The results show that by increasing the angle of the hot inclined wall and the aspect ratio of the cavity, the average Nusselt number decreases. The trend of the local Nusselt number on the inclined wall is also discussed.     

Effects of walls temperature variation on double diffusive natural convection of Al2O3–water nanofluid in an enclosure

The effect of wall temperature variations on double diffusive natural convection of Al₂O₃–water nanofluid in a differentially heated square enclosure with constant temperature hot and cold vertical walls is studied numerically. Transport mechanisms of nanoparticles including Brownian diffusion and thermophoresis that cause heterogeneity are considered in non-homogeneous model. The hot and cold wall temperatures are varied, but the temperature difference between them is always maintained 5 °C. The thermophysical properties such as thermal conductivity, viscosity and density and thermophoresis diffusion and Brownian motion coefficients are considered variable with temperature and volume fraction of nanoparticles. The governing equations are discretized using the control volume method. The results show that nanoparticle transport mechanisms affect buoyancy force and cause formation of small vortexes near the top and bottom walls of the cavity and reduce the heat transfer. By increasing the temperature of the walls the effect of transport mechanisms decreases and due to enhanced convection the heat transfer rate increases.     

Effect of baffle on convective heat transfer from a heat generating element in a ventilated cavity

This paper reports the results of a numerical and experimental investigation of mixed convection from a heat-generating element in a vented cavity with/without a baffle arrangement. Numerical investigations are carried out to determine the best position of the baffle on the walls of a rectangular chamber. The effect of varying the baffle heights and the position on the enhancement of heat transfer from the heater is investigated. Experiments were carried out for a heater located centrally in a parallelepiped that has an air inlet and an outlet port. The vertical baffle is fixed on the bottom wall of the chamber. After a detailed parametric study, correlations have been developed for the average Nusselt number and the maximum dimensionless temperature occurring in the heat generating element. Comparison of the numerical and experimental results for the geometry considered showed good agreement.     

Experimental studies on mixed convection heat transfer in laminar flow through a plain square duct

This paper reports the findings of experimental studies on combined free and forced convection through a plain square duct in laminar region. The test fluid flows through an inner square duct, hot water at high flow rate circulated through a annular channel formed between square duct and circular tube, in counter current fashion to attain a nearly uniform wall temperature conditions. The importance of mixed convection is judged by the value of the Richardson number (Ri). It was observed that at low Reynolds number, heat transfer was mainly governed by mixed convection. However at higher values of Reynolds number, heat transfer was significantly dominated by forced convection. It was found that Reynolds number higher than 1050 for water and 480 for ethylene glycol resulted in laminar forced convention heat transfer. The empirical correlation developed for Nusselt number in terms of Grashoff number and Graez number, was found to fit with experimental Nusselt number within ±11 and ±12?% for water and ethylene glycol respectively.     

Unsteady Natural Convection Within a Porous Enclosure of Sinusoidal Corrugated Side Walls

Numerically investigation of free convection within a porous cavity with differential heating has been performed using modified corrugated side walls. Sinusoidal hot left and cold right walls are assumed to receive sudden differentially heating where top and bottom walls are insulated. Air is considered as working fluid and is quiescent, initially. Numerical experiments reveal 3 distinct stages of developing pattern including initial stage, oscillatory intermediate, and finally steady-state condition. Implicit Finite Volume Method with TDMA solver is used to solve the governing equations. This study has been performed for the Rayleigh numbers ranging from 100 to 10,000. Outcomes have been reported in terms of isotherms, streamline, velocity and temperature plots and average Nusselt number for various Ra, corrugation frequency, and corrugation amplitude (CA). The effects of sudden differential heating and its resultant transient behavior on fluid flow and heat transfer characteristics have been shown for the range of governing parameters. The present results show that the transient phenomena are enormously influenced by the variation of the Rayleigh Number with CA and frequency.     

Conjugate natural convection in a square porous cavity

 Steady-state conjugate natural convection in a square cavity filled with a porous medium is studied numerically in this paper. The enclosure consists of two horizontal conductive walls of finite thickness and two vertical walls at different uniform temperatures. The focus is on the role of solid-fluid conductivity ratio, k, on the flow and heat transfer characteristics and the average Nusselt number, , over the vertical hot and cold walls of the cavity for a limited set of particular parameters. It was shown that the interface temperature, θ_w, along the top of the solid wall decreases with the increase in the wall conductivity k. Also, the values of decreases with the increase of the values of the parameter k. Comparison with known results from the open literature when the wall thickness of the horizontal solid walls is neglected (non-conjugate problem) is excellent. Received on 4 April 2000     

Double diffusive convection of anomalous density fluids in a porous cavity

A numerical study has been performed to analyze the combined effect of temperature and species gradients on the buoyancy-driven natural convection flow of cold water near its density extremum contained in a porous cavity. The governing equations are descretized using the finite volume method. The results of the investigation are presented in the form of steady-state streamlines, velocity vectors, isotherms, and isoconcentrationlines. The results are discussed for different porosities, Darcy numbers, and Grashof numbers. The heat and mass transfer rates calculated are found to behave nonlinearly with hot wall temperature. The heat and mass transfer are increased with increasing Darcy number and porosity. It is found that the convective heat and mass transfer rate are greatly affected by the presence of density maximum.     

A Modified Nested-Gridding for Upscaling–Downscaling in Reservoir Simulation

This article reports a numerical study of double-diffusive convection in a fluid-saturated vertical porous annulus subjected to discrete heat and mass fluxes from a portion of the inner wall. The outer wall is maintained at uniform temperature and concentration, while the top and bottom walls are adiabatic and impermeable to mass transfer. The physical model for the momentum equation is formulated using the Darcy law, and the resulting governing equations are solved using an implicit finite difference technique. The influence of physical and geometrical parameters on the streamlines, isotherms, isoconcentrations, average Nusselt and Sherwood numbers has been numerically investigated in detail. The location of heat and solute source has a profound influence on the flow pattern, heat and mass transfer rates in the porous annulus. For the segment located at the bottom portion of inner wall, the flow rate is found to be higher, whereas the heat and mass transfer rates are higher when the source is placed near the middle of the inner wall. Further, the average Sherwood number increases with Lewis number, while for the average Nusselt number the effect is opposite. The average Nusselt number increases with radius ratio (λ); however, the average Sherwood number increases with radius ratio only up to λ = 5, and for λ > 5 , the average Sherwood number does not increase significantly.     

Natural convection in an inclined rectangular porous cavity with uniform heat flux from the side

The problem of natural convection in an inclined rectangular porous layer enclosure is studied numerically. The enclosure is heated from one side and cooled from the other by a constant heat flux while the two other walls are insulated. The effect of aspect ratio, inclination angle and Rayleigh number on heat transfer is studied. It is found that the enclosure orientation has a considerable effect on the heat transfer. The negative orientation sharply inhibits the convection and consequently the heat transfer and a positive orientation maximizes the energy transfer. The maximum temperature within the porous medium can be considerably higher than that induced by pure conduction when the cavity is negatively oriented. The peak of the average Nusselt number depends on the Rayleigh number and the aspect ratio. The heat transfer between the two thermally active boundaries is sensitive to the effect of aspect ratio. For an enclosure at high or low aspect ratio, the convection is considerably decreased and the heat transfer depends mainly on conduction.     

CONVECTIVE HEAT TRANSFER FROM A CIRCULAR CYLINDER UNDER THE EFFECT OF A SOLID PLANE WALL

The purpose of this investigation is to study the convective heat transfer from a horizontal circular cylinder under the effect of a solid plane wall. The full Navier–Stokes and energy equations for two-dimensi onal steady flow are solved by a finite element method. The variations in surface shear stress, local pressure and Nusselt number around the surface of the cylinder as well as the predicted values of average Nusselt number, location of separation and some flow and temperature fields are presented. It is found that the average Nusselt number and drag force increase as the gap between the cylinder and the wall is increased.     

Heat transfer distribution in rectangular ducts with V-shaped ribs

 Heat transfer distributions are presented for a rectangular duct with two opposite wide walls arranged with V-shaped ribs pointing upstream or downstream relative to the main flow direction. The rectangular duct has an aspect ratio of 1/8. The parallel V-shaped circular ribs are arranged staggered on the two wide walls. The rib height-to-hydraulic diameter ratio is 0.06, with an attack angle of 60°. The pitch-to-height ratio equals 10. The tested Reynolds numbers range from 1000 to 6000. The test surface is sprayed with black paint and then liquid crystal, and a steady state method is adopted to obtain the temperature distribution between adjacent ribs. The secondary flow caused by the angled ribs creates different spanwise variation of the heat transfer coefficient on the rib-roughened wall for different V-rib orientations. Interaction between heat transfer and secondary flow is analyzed. In the streamwise direction, the temperature distribution shows a sawtooth behavior between a pair of adjacent ribs. Local Nusselt numbers are presented between a pair of adjacent ribs, and based on these the average Nusselt numbers are calculated to investigate the augmentation of heat transfer by the presence of the V-shaped ribs. Received on 15 May 2000     

An analytical skin friction and heat transfer model for compressible, turbulent, internal flows

An analytical skin friction model for compressible, turbulent, internal, fully developed flow involving adiabatic and non-adiabatic, smooth and rough flows has been developed by extending the incompressible law-of-the-wall relation to compressible cases. The formula recovers Prandtl's incompressible law of friction for pipes (within 2%) for incompressible flow. The model also shows good correlation with available data for compressible, adiabatic flows and flows involving cold wall heat transfer (within 15%). Comparison with hot wall data is only moderate (15–30%). Finally, using Reynold's analogy, the Stanton number and Nusselt numbers may be estimated.     

Experimental study of slot jet impingement heat transfer on a wedge-shaped surface

An experimental investigation was conducted to study the convective heat transfer rate from a wedge-shaped surface to a rectangular subsonic air jet impinging onto the apex of the wedge. The jet Reynolds number, nozzle-to-surface distance and the wedge angle were considered as the main parameters. Jet Reynolds number was ranged from 5,000 to 20,000 and two dimensionless nozzle-to-surface distances h/w?=?4 and 10 were examined. The apex angle of the wedge ranged from 30° to 180° where the latter case corresponds with that of a flat surface. Velocity profile and turbulence intensity were provided for free jet flow using hot wire anemometer. Local and average Nusselt numbers on the impinged surface are presented for all the configurations. Based on the results presented, the local Nusselt number at the stagnation region increases as the wedge angle is decreased but, it then decreases over the remaining area of the impinged surface. Average Nusselt number over the whole surface is maximum when the wedge angle is 180° (i.e. plane surface) for any jet and nozzle-to-surface configuration.     

Aspect ratio effect on natural convection in water near its density maximum temperature

The effect of the aspect ratio on natural convection in water subjected to density inversion has been investigated in this study. Numerical simulations of the two-dimensional, steady state, incompressible flow in a rectangular enclosure with a variety of aspect ratios, ranging from 0.125 to 100, have been accomplished using a finite element model. Computations cover Rayleigh numbers from 10³ to 10⁶. Results reveal that the aspect ratio, A, the Rayleigh number, Ra, and the density distribution parameter, R, are the key parameters to determine the heat transfer and fluid flow characteristics for density inversion fluids in an enclosure. A new correlation for predicting the maximum mean Nusselt number is proposed in the form of , with the constants a and b depending on density distribution number R. It is demonstrated that the aspect ratio has a strong impact on flow patterns and temperature distributions in rectangular enclosures. The stream function ratio Ψ_inv/|Ψ_reg| is introduced to describe quantitatively the interaction between inversional and regular convection. For R=0.33, the density inversion enhancement is observed in the regime near A=3.     

Laminar flow heat transfer for simultaneously developing velocity and temperature profiles in ducts of rectangular cross section

Summary A numerical method is used to solve the heat transfer equations for laminar flow in ducts of rectangular cross section with simultaneously developing temperature and velocity profiles, both for constant wall temperature and for constant heat input per unit length of the duct. Like the solutions for a fully developed velocity profile, the Nusselt number for each aspect ratio is found to increase from a limiting value at large distances from the entry plane to a maximum at the entry plane. The results also show a strong effect of the Prandtl number on the heat transfer coefficients with uniform and fully developed velocity profiles representing the upper and lower limits respectively. Comparisons are made with analytical solutions for circular ducts and parallel plates and with experimental data.     

Experiments on melting of a vertical ice layer immersed in immiscible liquid

Experiments on the melting of a vertical ice layer immersed in immiscible liquid yielded quantitative results both for the timewise evolution of the melting front and the heat transfer. Vegetable oil, which was contained in a rectangular vessel, was adopted as a testing liquid. A bubble-free ice block stuck on a cooled wall was installed vertically in the vessel. The experiments were carried out for the immiscible liquid temperatures from 7.6 to 30.0 ^°C, while for the cooled wall temperatures from 0 to ?11.5 ^°C. The flow structure of the liquid and the melting front were extensively observed and recorded photographically. It was found that the heat transfer and the rate of melting are significantly affected by a couple of fluid motions of both the water melt induced by melting of ice and the immiscible liquid based on free convection.