高效液相色谱法测定邻氰基苄基膦酸二乙酯

高效液相色谱法测定邻氰基苄基膦酸二乙酯＊许峰何大森宋跃群张禹应玲（浙江师范大学化学系浙江金华３２１００４）关键词高效液相色谱邻氰基苄基膦酸二乙酯邻氰基苄基膦酸二乙酯（ＤＣＰ）是生产荧光增白剂ＥＲ的重要中间体［１］。它由邻氰基甲苯光氯化，邻氰基氯苄酯化...     

水溶性卟啉自由碱的非均相金属插入反应

水溶性卟啉自由碱的非均相金属插入反应刘志贤，周永洽，段长胜，申泮文（河北师范大学化学系，石家庄０５００１６）（南开大学，天津３０００７１）陈钢进（浙江师范大学，金华３２１００４）卟啉自由碱与金属供体反应生成金属卟啉的反应称为金属插入反应。元素周期表中...     

镨乙酰丙酮配合物宽波段光声光谱研究

测量了宽波段范围（紫外可见，近红外及中红外）稀土乙酰丙酮（aa)配合物的光声光谱，检测到了大部分Pr^3 的f-f跃迁谱峰，分析了Pr-O 键性质，解释了谱峰分裂以及谱峰位移的原因。与传统的透射谱和吸收谱相比较，光声光谱具有检测快速，分辨率高以及可进行无损分析等优点，特别是对于稀土离子的f-f跃迁的研究，光声光谱具有一定的独特性。     

氧化铈表面NO的热脱附性能

氧化铈表面ＮＯ的热脱附性能＊钟依均（浙江师范大学化学系，浙江金华３２１００４）罗孟飞黄宇增朱波袁贤鑫（杭州大学催化研究所，杭州３１００２８）关键词一氧化氮，热脱附，二氧化铈，表面反应ＣｅＯ２作为汽车尾气净化三效催化剂的助剂，由于其特殊的性能越来越引起...     

评介《有机波谱解析》

评介《有机波谱解析》吴蕙君（华东师范大学化学系，上海２０００６２）浙江师范大学（浙江金华）程存归，胡秀爱，夏根基在多年教学实践基础上，广泛吸收了国内外教材中的新颖内容，收集和挑选了很多有利于学习掌握波谱解析法的实例和习题，编著了《有机波谱解析》一书，...     

负载Pt,Pd催化剂上NO—TPD和NO催化还原性能

负载Ｐｔ、Ｐｄ催化剂上ＮＯ－ＴＰＤ和ＮＯ催化还原性能１）钟依均（浙江师范大学化学系金华３２１００４）罗孟飞周碧袁贤鑫（杭州大学催化研究所杭州３１００２８）关键词负载Ｐｔ、Ｐｄ催化剂ＮＯ－ＴＰＤＣＯ－ＮＯ反应分类号Ｏ６４３．３２氮氧化物（ＮＯｘ）污染是...     

光声光谱在稀土分析中的应用

本文综述了光声光谱在稀土分析中的应用。全文分为三部分:稀土氧化物粉末样品的光声光谱研究;稀土溶液的光声光谱研究及其测定;稀土溶液液膜光声光谱研究。表明光声光谱分析方法对于稀土元素的光谱精细结构、禁戒跃迁研究及其分析测定是一种重要的手段。     

光声光谱在分析化学上的应用

作为光声光谱学(PAS)基础的光声(PA)效应虽是约一百年以前发现的,但是形成光声光谱这门新的光谱技术却是在最近十年光景。最早发展的是红外激光源和紫外可见宽带光源的光声光谱,前者主要用于气体分析,后者主要用于固相分析。最近三、四年以来,光声检测已作为一个通用的探测技术而与多种既有的光谱技术相结合,从而使这些光谱技术有了新的适应能力。光声光谱的应用面很广,但是它在分析     

激光光散射表征寡链聚苯乙烯微胶乳粒子的方法

本文阐述了利用激光光散射表征寡链（ｐａｕｃｉ－ｃｈａｉｎ）聚苯乙烯微胶乳的方法。在静态光散射中，可测得微胶乳粒子的重均摩尔质量，结合粒子内所含高分子链的重均分子量，进而计算出每个微胶乳粒子内高分子链的平均数目；在动态光散射中，通过对时间相关光谱的拉普拉斯反演求出粒子的平动扩散系数分布Ｇ（Ｄ），进而得到流体力学半径（Ｒｈ）及分子量的分布。通过综合分析静态与动态光散射的结果，建立了计算球形粒子密度的光散射方法，并发现，寡链聚苯乙烯微胶乳的密度低于通常的胶乳粒子以及本体聚苯乙烯的密度     

12种嘌呤类化合物的滤纸基质室温Lin光法研究

较为详细地研究了１２种嘌呤类化合物以滤纸为基质的室温Ｌｉｎ光（ＲＴＰ）光谱特性与分子结构的关系，以及重原子效应和酸度效应对ＲＩＰ的影响。     

重铬酸钾电催化合成反应过程阳极稳定性及析气效应研究

针对重铬酸钾传统生产技术存在的高污染、高消耗等问题,研究了电催化合成重铬酸钾绿色新技术。实验研究了自制钌/铱/钛氧化物复合阳极的电催化性能,表征了电极表面形貌。结果表明,该阳极在铬酸钾溶液中具有较低的析氧电位和稳定的高催化活性。实验测得不同反应条件下的阴极析氢速率,建立了析氢速率和析氢量随阳极液铬酸钾初始浓度、反应温度及反应时间变化的数学模型,指出可用宏观测得的阴极析氢量定量表征重铬酸钾电催化反应进程,并讨论了析氢速率和析氢量的影响因素。     

Flow Injection Amperometric System Coupled with a Well-Plate for Fast Screening of Total Antioxidant Capacity

A flow injection (FI) system with an amperometric detection in combination with a 96-well-plate has been developed for high throughput screening of total antioxidant capacity. It is based on the reaction between dichromate and antioxidants Chromium reducing antioxidant capacity (CHROMAC) assay. Antioxidant reduces dichromate leading to a decrease of dichromate concentration, in which reacts further with triiodide reagent. The slow reaction between antioxidant and dichromate takes place in parallel in a 96-well microplate, with the reaction time sufficiently long to reach steady state conditions. Microliter volumes of the remaining dichromate solution were manually injected into the FI amperometric system. Reaction with iodide in acidic medium produces triiodide which undergoes electrochemical reduction on a glassy carbon working electrode at 200?mV versus a Ag/AgCl reference electrode. The decrease of electrical current was directly proportional to the antioxidant capacity. The optimum conditions have been achieved as follow: 160?mg?L^?1 of potassium dichromate, pH of dichromate solution of 2.82, 0.005?mol?L^?1 of potassium iodide, 0.20?mol?L^?1 of hydrochloric acid, and 3.0?mL?min^?1 total flow rate. The developed method was applied for the determination of total antioxidant capacity of tea and herbal infusions and fruit juice samples. The results obtained indicated that the developed method had good correlation with the batch CHROMAC spectrophotometric method and 1,1-diphenyl-2-picrylhydrazyl scavenging assay. The proposed method provides fast and high throughput analysis, convenient operation, and low consumption of chemical reagents and samples.     

Differential thermal analysis and temperature profile analysis of pyrotechnic delay systems: Slow burning mixtures of boron and potassium dichromate

The slow burning pyrotechnic reaction between boron and potassium dichromate has been studied by differential thermal analysis and temperature profile analysis. The latter technique in which the combustion process is studied directly, shows the presence of two reaction stages and validates the results from differential thermal analysis obtained under non-ignition conditions. In the first stage potassium dichromate is reduced by boron to form potassium chromate. Differential thermal analysis shows that the reaction takes place below the melting temperature of potassium dichromate and becomes much more rapid above this temperature. The second stage which occurs in the region of 1000 K involves the reaction of potassium chromate with more boron. The first stage acts as a trigger for the second and it is this latter stage which propagates the combustion.     

重铬酸钾电化学合成反应表观动力学

针对重铬酸钾传统生产技术存在的高污染、高消耗等问题,研究了用电化学合成绿色技术.由在自制电解槽中以铬酸钾为原料电化学合成重铬酸钾的反应动力学实验,测得不同反应条件下的动力学数据.结果表明,电化学合成反应过程表现为拟零级反应动力学特征.建立了电化学合成反应表观动力学方程和阳极电解液体积随转化率的变化方程,求得了动力学参数...     

Volumetric estimation of potassium permanganate and potassium dichromate in mixtures with oxalic acid

1. A simple method has now been developed for the volumetric estimation of potassium permanganate and potassium dichromate in mixtures The method consists in taking an aliquot volume of the mixture in an Erlenmeyer flask, adding sufficient quantities of sulphuric acid and manganous sulphate (catalyst) and titrating with a standard solution of sodium oxalate or oxalic acid run in from the burette, until the colour changes from orange-red to yellow. The oxalic acid run ingives a measure of the permanganate present in the mixture Then the mixture in the flask is titrated with a standard solution of Mohr's salt using diphenylbenzidine as indicator. The volume of Fe⁺² solution run in the second stage gives a measure of the dichromate present in the original mixture. 2. The reverse titration does not give accurate results, because it is affected by the induced reaction between oxalic acid and dichromate which is induced by the reaction between oxalic acid and permanganate during the first stage of the reaction. This induced reaction has been studied in some detail.     

Differential thermal analysis and temperature profile analysis of pyrotechnic delay systems: mixtures of tungsten and potassium dichromate

The self-propagating combustion reaction between tungsten and potassium dichromate has been studied by differential thermal analysis and temperature profile analysis. Two reaction stages have been distinguished in the combustion where the rate of temperature rise is ? 10⁵ K min^?1: in the first potassium dichromate is reduced by tungsten to form potassium chromate and in the second stage the potassium chromate reacts with more tungsten to form potassium tungstate and chromic oxide.     

Construction,assessment and applications of a dichromate-selective liquid membrane electrode based on tetrapentylammonium dichromate

A dichromate-selective liquid-membrane electrode based on tetrapentylammonium dichromate dissolved in 2-nitrotoluene is described. The electrode exhibits rapid and linear response to the activity of Cr(VI) anions in the range 5 × 10^?4–2 × 10.2 M dichromate; the slopes of the calibration graphs depend on the acidity. The electrode is useful for end-point indication in titrations of iron(II), arsenic(III), ascorbic acid, thiobarbituric acid, thiourea, and cysteine with dichromate. The electrode is also used as indicator electrode in a potentiometric reaction-rate method for the determination of hydroxyl-containing organic compounds, based on their oxidation by dichromate in acidic solution; ethanol, isopropanol, ethylene glycol, propylene glycol, butylene glycol, and several carbohydrates were determined with a mean error of 1%. The method is applied to determine the ethanol content of alcoholic beverages. Kinetic data are given for the dichromate/ethanol reaction.     

Photocatalytic reduction of dichromate by titanium dioxide supported on hollow glass microbeads

The photocatalytic reduction of dichromate using TiO2/beads as a photocatalyst was studied. The results showed that 3.8 × 10-4 mol/dm3 of dichromate can be completely reduced into Cr3 after illumination for 35 min with a 375 W medium pressure mercury lamp. The effects of factors such as the amount of TiO2/beads , initial concentration of dichromate, initial pH, nitrogen and oxygen atmosphere, and concentration of Fe3 on the photocatalytic reduction of dichromate were investigated. A possible mechamism of the photocatalytic reaction was proposed. After illumination for 200 h, no significant loss of photocatalytic activity of TiO2/beads was observed.     

Transformation of Acetaminophen by Dichromate Oxidation Produces the Toxicants 1,4-Benzoquinone and Ammonium Ions

The reaction of the common pain reliever acetaminophen (paracetamol, 4-acetamidophenol) with dichromate was investigated over time under conditions that simulate wastewater disinfection. The occurrence of the acetaminophen in the water bodies, especially in drinking water resources, has received considerable attentions. In situ chemical oxidation is a promising cost-effective treatment method to remove acetaminophen from water body as it degrades the drug to large extent. Experimental results indicate that the reaction is second order overall and first order with respect to both dichromate and acetaminophen, and has activation energy of 14.1 kJ/mol. The second-order rate constant ranges from 1.56 × 10^?3 to 13.4 × 10^?3 min^?1 at temperature from 35 to 65°C. The acetaminophen degradation rates can be accelerated through increasing reaction temperature and oxidant concentration. The reaction under acid conditions was slightly faster than under alkaline or neutral conditions. Two of the products were unequivocally identified as the toxic compounds 1,4-benzoquinone and ammonium ions. These results demonstrate that acetaminophen is likely to be transformed significantly into toxic product if dichromate is used as an oxidizing agent during wastewater treatment.     

Redox substoichiometry in isotope dilution analysis

The oxidation reaction of antimony(III) with potassium dichromate has been investigated radiometrically. The quantitative oxidation of antimony(III) was found to be not disturbed even in large amounts of tin(IV). On the basis of these results the redox substoichiometric isotope dilution analysis using potassium dichromate as the oxidizing agent was proposed for the determination of antimony in metallic tin. The antimony content of 1.22±0.05 μg in metallic tin (10 mg) was determined without separation of the matrix element.