助剂对超细CuO－ZnO－SiO_2催化剂性质和CO_2加氢反应性能的影响

研究了９种助剂对用于ＣＯ２加氢反应的超细ＣｕＯ－ＺｎＯ－ＳｉＯ２催化剂性能的影响，并进行了ＸＲＤ和ＴＰＲ表征．结果表明，助剂影响超细催化剂的性质和催化性能，ＴｉＯ２、ＣｅＯ２、ＭｇＯ和Ｌａ２Ｏ３是ＣＯ２加氢合成甲醇的超细ＣｕＯ－ＺｎＯ－ＳｉＯ２催化剂体系的优良助剂．在含有不同助剂的ＣｕＯ－ＺｎＯ－ＳｉＯ２催化剂体系内存在ＣｕＯ和ＺｎＯ晶相，但除ＣｅＯ２以外，其它的助剂都可能以微晶或无定型的形式存在．ＴＰＲ研究表明，添加的助剂除ＣｅＯ２以外，都使超细ＣｕＯ－ＺｎＯ－ＳｉＯ２催化剂的还原温度提高，而且助剂对ＣｕＯ－ＺｎＯ－ＳｉＯ２催化剂活性的影响，按照助剂对ＣｕＯ－ＺｎＯ－ＳｉＯ２催化剂还原温度的影响进行了探讨     

Ce2O—TiO2／SiO2的制备及除氟性能研究

以ＳｉＯ２为基质，ＣｅＯ２ＴｉＯ２为包覆物质，采用溶胶凝胶法制备ＣｅＯ２ＴｉＯ２／ＳｉＯ２表面复合物，并对所制复合物进行除氟测试。用扫描电镜（ＳＥＭ）观察表面形貌，讨论实验环境、试剂用量等因素对ＣｅＯ２ＴｉＯ２／ＳｉＯ２制备及除氟性能的影响，结果表明：ｎＴｉ（ＯＣ４Ｈ９）４／ｎＣｅＣｌ３·７Ｈ２Ｏ＝１、ｎＣＨ３ＣＯＯＨ／ｎＴｉ（ＯＣ４Ｈ９）４＝４５、ｎＣ３Ｈ８Ｏ３／ｎＴｉ（Ｏ４Ｈ９）４＝０３、ＲＨ＝９５％，热处理温度１１０℃时，所制ＣｅＯ２ＴｉＯ２／ＳｉＯ２对Ｆ－的吸附容量（ｑ）为２１４ｍｇ／ｇ，去除率（Ｅ）为８５６％。     

助剂对超细CuO—ZnO—SiO2催化剂性质和CO2加氢反应性能的影响

研究了９种助剂对用于ＣＯ２加氢反应的超细ＣｕＯ－ＺｎＯ－ＳｉＯ２催化剂性能的影响，并进行了ＸＲＤ和ＴＰＲ表征，结果表明，助剂影响超细催化剂的性质和催化性能，ＴｉＯ２、ＣｅＯ２、ＭｇＯ和Ｌａ２Ｏ３是ＣＯ２加氢合成的超细ＣｕＯ２－ＺｎＯ－ＳｉＯ２催化剂体系的优良助剂，在含有不同助剂的ＣｕＯ－ＺｎＯ－ＳｉＯ２催化剂体系内存在ＣｕＯ和ＺｎＯ２晶相，但除ＣｅＯ２以外，其它的助剂都可能以微晶或无定型的形式存在     

城市大气飘尘的发射光谱分析

本文以ＫＨ２ＰＯ４的载体，Ｉｎ和Ｐｄ作内标，采用平头石墨电极，交流电弧光源和溶液干楂法，建立了一个发射光谱法在几十毫克大气飘尘样品中同时测定Ｂｅ、Ｖ、Ｃｒ、Ｎｉ、Ｆｅ、Ｃｕ、Ｓｎ、Ｔｉ、Ｐｂ、Ｍｎ、Ｃｄ、Ｚｎ和Ｃｏ等１３个元素。     

新型高活性催化剂乙烯气相聚合的研究（Ⅵ）：锌化合物对催化…

研究了新型高活性乙烯气相聚合催化剂ＴｉＣｌ４、Ｔｉ（ＯＢｕ）４／ＭｇＣｌ２、ＳｉＯ２和ＺｎＣｌ２／醇／ＡｌＲ３体系中ＺｎＣｌ２－ＡｌＥｔ３／ＳｉＯ２重量比和锌化合物含量对气相均聚合的影响，比较了２种不同催化剂Ｃａｔ＃Ａ和Ｃａｔ＃Ｂ的聚合反应力学及性能差异。ｄ ｆ ｃｌｔｉｐ     

金属氧化物改性的Pd／D3520催化剂及其催化加氢活性的研究

改变金属和载体的种类可以改变高分子催化剂的活性。本文在Ｄ３５２０负载的Ｐｄ催化剂中添加ＳｎＣｌ２．２Ｈ２Ｉ．ＦｅＣｌ３．６Ｈ２Ｏ，Ｐｂ（ＯＨ）２，ＢｉＣｌ３，形成Ｄ３５２０负载的金属氧化物──钯催化剂。研究结果表明，ＳｎＯ２，Ｆｅ２Ｏ３的引入对原催化剂具有良好的助催化效果，其中Ｆｅ２Ｏ３的引入使原单位金属高分子催化剂对苯乙烯的催化加氢活性提高１１０％，ＰｂＯ，Ｂｉ２Ｏ３的引入使催化加氢活性大大降低     

CuZSM—5分子筛上苯酚羟化制苯二酚

在Ｎａ２Ｏ－ＳｉＯ２－ＣｕＯ－Ｈ２Ｏ体系中以１５％ＴＰＡＢｒ－８５％ＨＭＤＡ为模板剂合成了ＣｕＺＳＭ－５分子筛，并用ＸＲＤ，ＩＲ及ＳＥＭ等方法进行了表征，考察了ＣｕＺＳＭ－５分子筛催化苯酚与过氧化氢的羟化活性，研究了催化剂用量，反应温度，反应时间及ｎ（ＰｂＯＨ）／ｎ（Ｈ２Ｏ２）等对羟化活性的影响。     

Ti／SnO2＋Sb2O3／PbO2阳极的性能研究

以ＳＥＭ、ＥＤＳ和ＸＲＤ研究Ｔｉ／ＳｎＯ２＋Ｓｂ２Ｏ３／ＰｂＯ２阳极，测定该阳极在１ｍｏｌ／ＬＨ２ＳＯ４中的使用寿命及其电化学参数ａ，ｂ，ｉ０并用双位垒模型讨论了其动力学参数。结果表明该电极具有优良的电化学性能和较长的使用寿命。     

磷酸三丁酯色层分离—电感耦合等离子体原子发射光谱法测定U3Si2

本法对Ｕ３Ｓｉ中２２个微量杂质元素的测定，进行了较系统的实验研究，取样１００ｍｇ时，Ａｌ、Ｃａ、Ｃｄ、Ｃｒ、Ｃｕ、Ｆｅ、Ｈｆ、Ｉｎ、Ｍｇ、Ｍｎ、Ｍｏ、Ｎｂ、Ｎｉ、Ｐｂ、Ｓｎ、Ｔａ、Ｔｉ、Ｖ、Ｙ、Ｚｎ和Ｚｒ的测定范围５μｇ／ｇ－８００μｇ／ｇ，回收率为９４％－１０５％，ＲＳＤ（ｎ＝８）０．４％－１．２％。     

Ni-Cu和TiO2-SiO2间的相互作用及其对催化性能的影响

用表面反应改性法制备了ＴｉＯ２－ＳｉＯ２（ＴＳＯ）表面复合物载休，用ＴＰＲ，ＩＲ，ＴＰＤ－ＭＳ和ＴＰＳＲ－ＭＳ等技术研究了Ｎｉ－Ｃｕ／ＴＳＯ间的相互作用及其对ＣＯ加氢反应的催化性能。结果表明，ＮｉＯ－ＣｕＯ与ＴＳＯ间的相互作用导致ＣｕＯ的还原温度降低和ＮｉＯ的还原温度升高，并有少量表面物种生成；还原后的Ｎｉ－Ｃｕ／ＴＳＯ催化剂表面上存在着两类活性中心，即合金相中的Ｎｉ及载体相中的Ｔｉ＾ｎ＋（或Ｔｉ     

纳米薄膜光催化剂的制备与表面态研究

利用溶胶-凝胶提拉成膜法制备了TiO2,SnO2,Ag/SnO2,Ag/SnO2/TiO2纳米薄膜半导体催化剂.采用粉末电导法初步研究了纳米半导体薄膜催化剂的表面结构,测定了表面态能级相对于半导体导带边的位置.实验表明:四种催化剂在不同的表面能级位置都存在表面态:TiO2具有两类表面态,其能量分别为0.75eV和0.58eV.Ag/SnO2/TiO2由于Ag的担载,出现更负的表面态能级(0.33eV).这将会显著提高导带电子密度,加速光催化反应速率.     

Controllable Fabrication of TiO(2) 1D-Nano/Micro Structures: Solid, Hollow, and Tube-in-Tube Fibers by Electrospinning and the Photocatalytic Performance

The solid, hollow, and tube-in-tube porous nanofiber structures of TiO(2) are synthesized successfully by a simple non-coaxial electrospinning method without using a complicated coaxial jet head, combined with adjusting the concentration of the TiO(2) precursor and the pinhole diameter of the jet head and by final calcination. The formation mechanisms of different structured TiO(2) fibers are discussed in detail. This method is facile and effective, and easy to scale up. Furthermore, it is a versatile method for constructing tube-in-tube fibers of other metal oxides such as ZrO(2) , SiO(2) , SnO(2) , and In(2) O(3) . The photocatalytic activity of tubular TiO(2) nanofibers for the degradation of 2-chlorophenol and 2,4-dichlorophenol under UV or visible-light irradiation is better than the one of commercial available TiO(2) powder, rutile, and anatase TiO(2) fibers.     

Photoproduction of iodine with nanoparticulate semiconductors and insulators

The crystal structures of different forms of TiO2 and those of BaTiO3, ZnO, SnO2, WO3, CuO, Fe2O3, Fe3O4, ZrO2 and Al2O3 nanoparticles have been deduced by powder X-ray diffraction. Their optical edges have been obtained by UV-visible diffuse reflectance spectra. The photocatalytic activities of these oxides and also those of SiO2 and SiO2 porous to oxidize iodide ion have been determined and compared. The relationships between the photocatalytic activities of the studied oxides and the illumination time, wavelength of illumination, concentration of iodide ion, airflow rate, photon flux, pH, etc., have been obtained. Use of acetonitrile as medium favors the photogeneration of iodine.     

二氧化钛系列光催化剂的拉曼光谱

采用溶胶-凝胶法制备了TiO₂粉体和薄膜光催化剂.使用FT-Raman光谱和激光共聚焦拉曼光谱研究了粉体和薄膜的拉曼光谱,探讨了热处理条件、Fe³⁺掺杂和以硅胶为载体的薄膜化所引起的TiO₂结构变化.结果表明,TiO₂在350℃存在由无定形向锐钛矿相的转变,600℃下存在锐钛矿相向金红石相的转变,750℃下完全转变为金红石相;掺杂会引起TiO₂的晶格畸变,导致拉曼谱峰宽化;以硅胶为载体的TiO₂负载薄膜的部分拉曼谱峰与粉体相比,有一定的位移和宽化.     

Morphological and photoelectrochemical characterization of core-shell nanoparticle films for dye-sensitized solar cells: Zn-O type shell on SnO2 and TiO2 cores

Core-shell type nanoparticles with SnO2 and TiO2 cores and zinc oxide shells were prepared and characterized by surface sensitive techniques. The influence of the structure of the ZnO shell and the morphology ofnanoparticle films on the performance was evaluated. X-ray absorption near-edge structure and extended X-ray absorption fine structure studies show the presence of thin ZnO-like shells around the nanoparticles at low Zn levels. In the case of SnO2 cores, ZnO nanocrystals are formed at high Zn/Sn ratios (ca. 0.5). Scanning electron microscopy studies show that Zn modification of SnO2 nanoparticles changes the film morphology from a compact mesoporous structure to a less dense macroporous structure. In contrast, Zn modification of TiO2 nanoparticles has no apparent influence on film morphology. For SnO2 cores, adding ZnO improves the solar cell efficiency by increasing light scattering and dye uptake and decreasing recombination. In contrast, adding a ZnO shell to the TiO2 core decreases the cell efficiency, largely owing to a loss of photocurrent resulting from slow electron transport associated with the buildup of the ZnO surface layer.     

纳米二氧化硅复合悬浮液合成及聚合物吸附研究

从水玻璃合成了纳米硅溶胶,并以它为起始原核,通过水解钛酸正丁酯沉积二氧化钛,制得了稳定的二氧化钛复合二氧化硅纳米悬浮液,研究了添加的高分子两亲分散剂聚醚多胺在硅胶粒上的吸附和二氧化钛沉积过程中的贡献。研究结果表明,添加的聚醚多胺吸附在硅胶粒表面,有利于硅溶胶的稳定;钛酸正丁酯-丁醇-硫酸水解反应是可逆的,二氧化钛向硅胶粒定向沉积,这些沉积物呈无定形态,在沉积过程中,吸附的这些添加剂发生离子化,其阳离子端基形成的离子氛有利于二氧化钛沉积,并能减少胶粒粘接或团聚。     

表面键联型TiO2/SiO2固定化催化剂的结构及催化性能

 采用浸渍法制备了表面键联型TiO2／SiO2固定化光催化剂．XRD\r\n,FT－IR,XPS和BET比表面积测定结果表明,TiO2通过Ti－O－Si联结\r\n负载于多孔硅胶的表面,由此提出TiO2／SiO2的结构模型．考察了多孔\r\n硅胶的粒度及氧化钛负载量对催化剂活性的影响．对活性艳红K－2G（\r\nR15）的光催化脱色反应,最佳的光催化剂30％TiO2／SiO2（Ims30）比\r\nB－TiO2粉末的催化速率快3倍．随着载体粒度的减小,催化剂的比表面\r\n积增大,催化活性升高;多孔硅胶不仅起着支持体的作用,而且具有分\r\n散的作用;多孔硅胶具有很好的透光性．经ξ－电位测定,所制备催化\r\n剂的等电点为3．0pH单位,表明催化剂表面呈酸性．     

粉末状和薄膜状TiO2对敌敌畏的光催化降解

在光照条件下,光催化剂TiO₂有很强的氧化能力,能有效降解水中的有机污染物^[1],因而日益受到人们的关注.目前,研究最多的胶体溶液和颗粒悬浮体系因其难于分离、回收而限制了实际应用,因此催化剂固定问题急需解决.近年来,国内外对TiO₂薄膜催化剂做了许多探索^[2,3],取得了一些进展.本文用溶胶-凝胶法制备了一种粉末状TiO₂光催化剂和两种薄膜型TiO₂光催化剂,并进行了结构和形貌的表征,对敌敌畏稀释液做了光催化降解实验,并与粉末状TiO₂进行对比.结果表明:薄膜TiO₂催化剂优于粉末TiO₂催化剂.     

Density functional theory study on the structural and electronic properties of low index rutile surfaces for TiO2/SnO2/TiO2 and SnO2/TiO2/SnO2 composite systems

The present study is concerned with the structural and electronic properties of the TiO2/SnO2/TiO2 and SnO2/TiO2/SnO2 composite systems. Periodic quantum mechanical method with density functional theory at the B3LYP level has been carried out. Relaxed surface energies, structural characteristics and electronic properties of the (110), (010), (101) and (00) low-index rutile surfaces for TiO2/SnO2/TiO2 and SnO2/TiO2/SnO2 models are studied. For comparison purposes, the bare rutile TiO2 and SnO2 structures are also analyzed and compared with previous theoretical and experimental data. The calculated surface energy for both rutile TiO2 and SnO2 surfaces follows the sequence (110) < (010) < (101) < (001) and the energy increases as (010) < (101) < (110) < (001) and (010) approximately = (110) < (101) < (001) for SnO2/TiO2/SnO2 and TiO2/SnO2/TiO2 composite systems, respectively. SnO2/TiO2/SnO2 presents larger values of surface energy than the individual SnO2 and TiO2 metal oxides and the TiO2/SnO2/TiO2 system renders surface energy values of the same order that the TiO2 and lower than the SnO2. An analysis of the electronic structure of the TiO2/SnO2/TiO2 and SnO2/TiO2/SnO2 systems shows that the main characteristics of the upper part of the valence bands for all the studied surfaces are dominated by the external layers, i.e., by the TiO2 and the SnO2, respectively, and the topology of the lower part of the conduction bands looks like the core layers. There is an energy stabilization of both valence band top and conduction band bottom for (110) and (010) surfaces of the SnO2/TiO2/SnO2 composite system in relation to their core TiO2, whereas an opposite trend is found for the same surfaces of the TiO2/SnO2/TiO2 composite system in relation to the bare SnO2. The present theoretical results may explain the growth of TiO2@SnO2 bimorph composite nanotape.     

纳米二氧化钛的量子尺寸效应及掺杂氧化锡对其光吸收的影响

采用溶胶-凝胶法制备了量子尺寸的纳米氧化钛和锡掺杂的纳米氧化钛,经过不同温度的热处理得到不同尺寸的粉末样品.通过X射线衍射(XRD)和电子衍射(ED) 表征了不同样品的物相组成和粒径(3～12 nm),通过反射谱(RS)深入研究了纳米氧化钛的量子尺寸效应及掺杂氧化锡对于纳米氧化钛光吸收性质的影响.实验结果表明纳米氧化钛有明显的光吸收量子尺寸效应,掺杂氧化锡促进了二氧化钛的锐钛矿向金红石相的转变,降低了相变起始温度.由于相变和尺寸变化两方面相反的作用,掺杂氧化锡对于二氧化钛光吸收边的位移影响不大.