偶氮甲酰胺分解产生呋喃西林代谢物的相关性研究

对偶氮甲酰胺(ADC)分解产生呋喃西林代谢物(SEM)的相关性进行了分析研究.采用液相色谱串联质谱法,ESI正离子模式,多反应监测MRM,内标法定量测定SEM的含量.SEM衍生物监测离子对为m/z 209/192、209/166(定性离子)、m/z 209/166(定量离子),SEM内标衍生物监测离子对为m/z 212/168(定性离子)、m/z 212/168(定量离子).定量限为0.5 μg/kg,方法的回收率为85%～94%,测定结果的相对标准偏差不大于9.4%(n=5).     

GC—MS-相转移衍生化法分析水相中亚硝酸根离子

采用相转移催化剂四辛基溴化铵及五氟苄基溴将水相(血、尿)中亚硝酸根离子衍生化生成可挥发性化合物,然后用GC-MS法进行测定.亚硝酸根离子含量在0.2～10 μg/ mL范围内与离子峰面积呈良好的线性关系,相关系数r=0.9998,检出限为0.1 μg / mL.用该方法对水、尿、血中亚硝酸根离子进行测定,测定结果的相对标准偏差为1.44%～4.17%(n=6),回收率为82%～84%.     

气相-质谱选择离子法测定化妆品中抗氧化剂丁基羟基茴香醚、二丁基羟基甲苯

 采用气相 质谱 (选择离子方式 )测定化妆品中抗氧化剂丁基羟基茴香醚 (BHA)和二丁基羟基甲苯(BHT) ,样品用甲醇振荡萃取 ,以SupelcoWAXTM 10 (30m× 0 2 5mmi.d .× 0 2 5 μm)为分析柱。该方法对样品中BHA和BHT的检测限分别为 2 5 μg/g和 0 5 μg/g。方法简便、快速、灵敏 ,可用于多种化妆品的检验。     

ClO--鲁米诺流动注射-抑制化学发光法测定银杏黄酮

基于在碱性条件下,银杏黄酮对ClO--鲁米诺体系有显著的抑制作用,结合反相流动注射技术,建立了流动注射-抑制化学发光测定银杏提取物中的银杏黄酮.银杏黄酮质量浓度在0.4～14.0 μg/mL范围与相对发光强度呈线性关系,检出限为0.06 μg/mL,采样频率为120次/h,对10.0 μg/mL的银杏黄酮平行测定11次,其RSD为1.2%,回收率为98.0%～104%.该方法可用于银杏黄酮制剂的测定.     

多元络合物光度法测定冶炼残渣中痕量铟

本文研究了InI-4与碱性染料反应形成多元离子缔合物用于痕量铟的测定.探讨了酸度、温度及表面活性剂对形成多元配合物反应的影响,比较了单显色剂(乙基罗丹明B)与多显色剂(乙基罗丹明B-丁基罗丹明B)的测定结果,单显色剂测定竖罐炼锌焦结物和蒸馏电吸尘焦结物中铟含量的结果分别为2.49 μg/g(RSD为4.72%,n=4)和0.920 μg/g(RSD为4.94%,n=4);双显色剂体系测定竖罐炼锌焦结物和蒸馏电吸尘焦结物中铟含量的结果分别为2.50 μg/g(RSD为1.37%,n=4)和0.98 μg/g(RSD为1.73%,n=4).方法可用于冶炼残渣中铟的测定.     

动物源性食品中硫氯酚残留量的高效液相色谱-电喷雾串联质谱法测定

建立了高效液相色谱-串联质谱(HPLC-MS/MS)测定动物源性食品中硫氯酚的方法.对样品前处理方法进行了改进,并对HPLC-MS/MS检测参数进行了优化.均质后的样品直接用乙腈提取,正己烷除脂净化后,采用HPLC-MS/MS电喷雾离子源、多反应监测负离子模式扫描,选择m/z 357/163、357/194作为定性离子对,m/z 357/163作为定量离子对,采用外标法定量.硫氯酚标准液的工作曲线在1 ～110 μg/kg范围内呈线性,相关系数为0.999 0;方法检出限和定量下限分别为 0.5、2 μg/kg;硫氯酚在添加含量2 ～100 μg/kg范围内平均回收率为80% ～112%,相对标准偏差为1.8% ～7.1%.该法操作简便、灵敏度高、回收率好,适用于动物肌肉、内脏及牛奶等动物源性基质中硫氯酚残留量的检测.     

液相色谱-质谱法对饮用水中六价铬的测定

建立了液相色谱分离、电喷雾质谱测定饮用水中六价铬的方法.水样经微孔滤膜过滤后直接进样,以乙腈-1.5 mmol/L四丁基氢氧化铵水溶液为流动相,Xterra~(TM) MS C_(18)色谱柱分离六价铬,使用单四极杆质谱,选择离子模式检测,监测离子为m/z 118、117、101、85,其中117为定量离子.Cr(Ⅵ)的线性范围为1.0 ～100.0 μg/L,方法定量下限为1 μg/L.在空白水样中分别添加1.0、2.0、10.0 μg/L的六价铬,测得平均回收率(n=5)依次为91%、94%、97%,相对标准偏差分别为12.2%、7.4%、3.5%.测定了42个饮用水样品,其中17批检出六价铬,检出量为1.2 ～15.4 μg/L.     

离子交换色谱法检测离子液体中阴离子

建立了用阴离子交换分离柱、化学抑制模式、电导检测测定系列离子液体中BF-4阴离子及其他杂阴离子(F-、Cl-、Br-)含量的方法,并用于在线监控离子液体合成工艺中阴离子杂质含量.确定淋洗液组成为1.6 mmol/L Na2CO3+3.9 mmol/L NaHCO3,流速为0.6 mL/min.本方法对所测阴离子检出限分别为50 μg/L(F-、Br-)和80 μg/L(BF-4);线性范围在3个数量级以上;r＞0.999;回收率在98%～102%之间.方法用于对离子液体小试工艺样品分析及过程监控时,结果满意,样品的RSD小于2.6%(n＝6).     

二甲基黄催化动力学光度法测定痕量铱

基于在H3PO4介质中,Ir(Ⅳ)对KIO4氧化二甲基黄的反应具有催化作用,建立了测定痕量铱的新催化光度法.测定铱的线性范围为(3.2～8.8)×10-2 μg/mL,检出限为7.54×10-7 g/L.对0.04 μg/mL Ir(Ⅳ)测定的相对标准偏差为1.5%(n=11).该催化反应对Ir(Ⅳ)和二甲基黄均为一级反应,其表观活化能为103.8 kJ/mol.试验了40多种共存离子的影响,大多数的常见离子不干扰测定.用该方法测定了岩矿和冶金产品中铱的含量,相对标准偏差为0.93%～2.5%,加标回收率为98.2%～102%.     

电喷雾萃取电离质谱法检测1-羟基芘

采用电喷雾萃取电离质谱(EESI-MS)分析致癌性环境有机污染物多环芳烃(PAHs)生物标志物1-羟基芘(1-OHP),探究1-OHP在EESI源中电离的可行性,考察ESI溶剂和样品溶液组成对方法灵敏度的影响,初步建立I-OHP的EESI MS半定量分析方法.结果表明,溶液中1-OHP能够在EES1源中有效电离,生成准分子离子[M-H]- (m/z 217),并得到其二级质谱特征碎片离子[M- H- CO]- (m/z 189);水、甲醇、乙醇、正丙醇和正丁醇5种ESI溶剂中,使用甲醇时,离子峰m/z 217信噪比最大.样品溶液中甲醇含量越高,离子峰m/z 217强度越强.离子峰m/z 217强度与1-OHP浓度在10～200 μg/L内的线性相关性相对最好;相关系数(R)0.982;相对标准偏差(RSD)为3.4％～14.0％(n=5);定量下限约为10 μg/L(S/N=10);单次检测时间小于0.5 min.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.