Deactivation reactions in the modeled 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐mediated free‐radical polymerization of styrene: A comparative study with the 2,2,6,6‐tetramethyl‐1‐piperidinyloxy/acrylonitrile system

The competitiveness of the combination and disproportionation reactions between a 1‐phenylpropyl radical, standing for a growing polystyryl macroradical, and a 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) radical in the nitroxide‐mediated free‐radical polymerization of styrene was quantitatively evaluated by the study of the transition geometry and the potential energy profiles for the competing reactions with the use of quantum‐mechanical calculations at the density functional theory (DFT) UB3‐LYP/6‐311+G(3df, 2p)//(unrestricted) Austin Model 1 level of theory. The search for transition geometries resulted in six and two transition structures for the radical combination and disproportionation reactions, respectively. The former transition structures, mainly differing in the out‐of‐plane angle of the N? O bond in the transition structure TEMPO molecule, were correlated with the activation energy, which was determined to be in the range of 8.4–19.4 kcal mol^?1 from a single‐point calculation at the DFT UB3‐LYP/6‐311+G(3df, 2p)//unrestricted Austin Model 1 level. The calculated activation energy for the disproportionation reaction was less favorable by a value of more than 30 kcal mol^?1 in comparison with that for the combination reaction. The approximate barrier difference for the TEMPO addition and disproportionation reaction was slightly smaller for the styrene polymerization system than for the acrylonitrile polymerization system, thus indicating that a β‐proton abstraction through a TEMPO radical from the polymer backbone could diminish control over the radical polymerization of styrene with the nitroxide even more than in the latter system. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 232–241, 2007     

Bis(ketenyl)benzenes: preparation,observation, and reaction with tetramethylpiperidin-1-yloxyl

1,2- and 1,3-Bis(ketenyl)benzenes formed by double dehydrochlorination and by double Wolff rearrangement, respectively, gave ketenyl IR absorption at 2115, and 2122, and 2116 cm^–1, respectively. Reaction of these bisketenes with the aminoxyl radical tetramethylpiperidin-1-yloxyl (TEMPO) gave the corresponding tetraadducts as mixtures of meso- and d,l-isomers. The kinetics of the reaction of 1,3-bis(ketenyl)benzene with TEMPO gave a rate constant comparable to that of the monoketene PhCH=C=O. The reactions proceed by the initial attack of TEMPO on the carbonyl carbon of one ketenyl group followed by fast capture of the intermediate radical by a second TEMPO, and then reaction of the remaining ketene.     

Nitroxyl radical addition to pentafulvenones forming cyclopentadienyl radicals: a test for cyclopentadienyl radical destabilization.

Photochemical Wolff rearrangements in alkane solvents of the 6-diazo-2,4-cyclohexadienones 4 and 13-15 give pentafulvenone (1), 2,3-benzopentafulvenone (2), dibenzopentafulvenone (3), and 2,4-di-tert-butylpentafulvenone (16), as identified by conventional UV and IR spectroscopy. Reactions of these fulvenyl ketenes with tetramethylpiperidinyloxyl (TEMPO) proceed by addition of TEMPO to the carbonyl carbon forming delocalized radicals for 1 and 2 which add one or more further TEMPO molecules, while the initial radical products formed from 3 and 16 dimerize. The rate constants of these reactions compared to hydration rate constants for the same compounds show the benzannulated derivatives 2 and 3 fit a previous correlation k(2)(TEMPO) vs k((H(2)O), whereas for 1 and 16 there is evidence for inhibition of reactions with radicals. The deviations are consistent with an absence of aromatic stabilization of the cyclopentadienyl radicals from 1 and 16 that is compensated in the benzannulated derivatives.     

A Tr Esr study of the quenching of photoexcited dioxouranium (VI) salts by stable nitroxyl free radicals

TR ESR spectroscopy was applied to the study of the quenching of excited dioxouranium (VI) (uranyl) nitrate and sulfate by stable nitroxyl radicals of the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) family. Photoexcitation of uranyl in solutions of alcohols of moderate viscosity (η = 3-10 cP) in the presence of TEMPO leads to CIDEP signals of TEMPO due to a radical triplet pair mechanism (RTPM). Polarized nitroxyls were also observed in solutions of polyelectrolyte sodium poly(styrenesulfonate), NaPSS, in the presence of the nitroxyl with a positively charged trimethylammonium group. Photolysis of uranyl salts in solutions of alcohols leads to the generation of free radicals of alcohols. No CIDEP of these radicals was observed, distinguishing U₂ ^2+* from its organic analog, the triplet benzophenone. The probable reason for the lack of polarization in uranyl photoreduction reactions is the difficult access of free radicals to the U atom of the solvated radical UO₂₊ (V); this atom bears the unpaired electron. The role of polyelectrolytes in the enhancement of the quenching of excited states is discussed. Results are in agreement with the statement that photoexcited uranyl has a triplet multiplicity.     

A versatile approach for the preparation of end‐functional polymers and block copolymers by stable radical exchange reactions

A versatile strategy for the preparation of end‐functional polymers and block copolymers by radical exchange reactions is described. For this purpose, first polystyrene with 2,2,6,6‐tetramethylpiperidine‐1‐oxyl end group (PS‐TEMPO) is prepared by nitroxide‐mediated radical polymerization (NMRP). In the subsequent step, these polymers are heated to 130 °C in the presence of independently prepared TEMPO derivatives bearing hydroxyl, azide and carboxylic acid functionalities, and polymers such as poly(ethylene glycol) (TEMPO‐PEG) and poly(ε‐caprolactone) (TEMPO‐PCL). Due to the simultaneous radical generation and reversible termination of the polymer radical, TEMPO moiety on polystyrene is replaced to form the corresponding end‐functional polymers and block copolymers. The intermediates and final polymers are characterized by ¹H NMR, UV, IR, and GPC measurements. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2387–2395     

Coordination chemistry of stable radicals: homolysis of a titanium-oxygen bond

Thermolysis of Cp2TiCl(TEMPO) (TEMPO = 2,2,6,6-tetramethylpiperidine-1-oxyl) at 60 degrees C in a benzene/CCl4 mixture generates Cp2TiCl2. Kinetic studies implicate a mechanism involving the reversible cleavage of a Ti-O bond to generate the TEMPO radical and Cp2TiCl, which is trapped by CCl4 to give Cp2TiCl2. The rate of this reaction is strongly inhibited by added TEMPO and increases with increasing CCl4 concentration, indicating that the coupling of TEMPO to Cp2TiCl is faster than chloride atom abstraction from CCl4.     

Reactivity of cyano-substituted fluorenes in reaction with the tempo radical

The rate constants for the reaction of the TEMPO radical with fluorene, 2-cyanofluorene, and 9-cyanofluorene were determined by ESR. A comparison was made of the reactivity of the hydrocarbons in reaction with the TEMPO radical and the peroxyl radical. The quantum-chemical characteristics of the radicals and particles taking part in the reactions and also the characteristics of the transition states in the reactions of the TEMPO radical and cumenylperoxyl radical with fluorene were obtained by the PM3 method. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 1, pp. 19–22, January–February, 2006.     

Synthesis of Zwitterionic Cobaltocenium Borate and Borata‐alkene Derivatives from a Borole‐Radical Anion

Chemical single‐electron reduction of 1‐mesityl‐2,3,4,5‐tetraphenylborole ( 3 ) gave a stable radical anion [CoCp*₂][ 3 ] as shown in earlier investigations. Herein, we present the reaction of [CoCp*₂][ 3 ] with the 2,2,6,6‐tetramethylpiperidine‐N‐oxyl radical (TEMPO), a common radical trap. Instead of radical recombination, the reaction proceeds through a redox pathway involving oxidation of the borole radical anion combined with reduction of TEMPO. This electron‐transfer process is accompanied by a deprotonation reaction of the cobaltocenium counterion by the base TEMPO^? to give TEMPO‐H and a neutral cobalt(I) fulvene complex ( 7 ). The latter was not observed directly during the reaction, because it instantaneously reacts as a nucleophile attacking at the boron center of the in situ generated borole 3 to give the borate 6 . However, 7 was synthesized independently by deprotonation of [CoCp*₂][PF₆]. In addition, the obtained zwitterionic cobaltocenium borate 6 undergoes a photolytic rearrangement to form the borata‐alkene derivative 9 that thermally transforms to the chiral cobaltocenium borate 12 . Our investigations are based on spectroscopic evidence, X‐ray crystallography, elemental analysis, as well as DFT calculations.     

Organocatalytic intermolecular [2+2] cycloaddition of norbornadienes by a stable organic radical compound

An organocatalytic [2+2] cycloaddition reaction of norbornadienes (NBDs) using catalytic amount of TEMPO was reported. Single crystal X-ray diffraction of the product revealed its detailed multicyclic structure containing a 4-membered ring, formed in intermolecular reaction. Addition of AIBN to the current catalytic system improved the product yield. Quantitative reaction of the NBD and TEMPO gave a 2:2 adduct of NBD and TEMPO, which was confirmed by HR-MS. This catalytic [2+2] addition of NBDs has great advantage in selective intermolecular coupling in comparison with [2+2] photocycloaddition.     

Decomposition of model alkoxyamines in simple and polymerizing systems. I. 2,2,6,6‐tetramethylpiperidinyl‐ N‐oxyl‐based compounds

The thermal decomposition of five alkoxyamines labeled TEMPO–R, where TEMPO was 2,2,6,6‐tetramethylpiperidinyl‐N‐oxyl and R was cumyl (Cum), 2‐tert‐butoxy‐carbonyl‐2‐propyl (PEst), phenylethyl (PhEt), 1‐tert‐butoxy‐carbonylethyl (EEst), or 1‐methoxycarbonyl‐3‐methyl‐3‐phenylbutyl (Acrylate‐Cum), was studied with ¹H NMR in the absence and presence of styrene and methyl methacrylate. The major products were alkenes and the hydroxylamine 1‐hydroxy‐2,2,6,6‐tetramethyl‐ piperidine (TEMPOH), and in monomer‐containing solutions, unimeric and polymeric alkoxyamines and alkenes were also found. Furthermore, the reactions between TEMPO and the radicals EEst and PEst were studied with chemically induced dynamic nuclear polarization. In comparison with coupling, TEMPO reacted with the radicals Cum, PEst, PhEt, and EEst and their unimeric styrene adducts by disproportionation to alkenes and TEMPOH only to a minor extent (0.6–3%) but with the radical adducts to methyl methacrylate to a considerable degree (≥20%). Parallel to the radical cleavage, TEMPO–EEst (but not the other alkoxyamines or TEMPO–Acrylate‐Cum) underwent substantial nonradical decay. The consequences for TEMPO‐mediated living radical polymerizations are discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3604–3621, 2001     

Synthesis of diblock copolymers by combining stable free radical polymerization and atom transfer radical polymerization

A stable nitroxyl radical functionalized with an initiating group for atom transfer radical polymerization (ATRP), 4‐(2‐bromo‐2‐methylpropionyloxy)‐2,2,6,6‐tetramethyl‐1‐piperidinyloxy (Br‐TEMPO), was synthesized by the reaction of 4‐hydroxyl‐2,2,6,6‐tetramethyl‐1‐piperidinyloxy with 2‐bromo‐2‐methylpropionyl bromide. Stable free radical polymerization of styrene was then carried out using a conventional thermal initiator, dibenzoyl peroxide, along with Br‐TEMPO. The obtained polystyrene had an active bromine atom for ATRP at the ω‐end of the chain and was used as the macroinitiator for ATRP of methyl acrylate and ethyl acrylate to prepare block copolymers. The molecular weights of the resulting block copolymers at different monomer conversions shifted to higher molecular weights and increased with monomer conversion. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2468–2475, 2006     

Rapid additive‐free TEMPO‐mediated stable free radical polymerizations of styrene

The stable free radical polymerization (SFRP) of styrene, initiated with benzoyl peroxide in the presence of TEMPO, under bulk conditions, is demonstrated to proceed rapidly without the need for any rate enhancing additives such as camphorsulfonic acid, 2‐fluoro‐1‐methyl pyridinium p‐toluenesulfonate, or acetic anhydride. Monomer conversions as high as 70% can be achieved in 5 h or less while maintaining polydispersity indexes of 1.15. These results stand in stark contrast to earlier reactions that required 70 h to achieve similar conversions. This study demonstrates that the single largest factor governing the rates of polymerization is the molar concentration of excess TEMPO remaining in solution after initiation. A reduction in the TEMPO to BPO ratio is required when large amounts of BPO are used to target low molecular weight polystyrenes. However, when a lower molar amount of BPO is used to obtain high molecular weight polystyrenes, a higher TEMPO to BPO ratio is required. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5487–5493, 2007     

Nitroxyl radical reactions with 4-pentenyl- and cyclopropylketenes: new routes to 5-hexenyl- and cyclopropylmethyl radicals

4-Pentenylketenes 4a and 9 and cyclopropylketenes 3a, 13, 14 (RCH=C=O) are generated by photochemical Wolff rearrangements and observed by IR as relatively long-lived species at room temperature in hydrocarbon solvents. The reactions of these ketenes with the nitroxyl radicals tetramethylpiperidinyloxyl (TEMPO, TO*) and tetramethylisoindoline-2-oxyl (TMIO, IO*) form carboxy substituted 5-hexenyl and cyclopropylmethyl radicals which are either trapped by a second nitroxyl radical or undergo rearrangements followed by trapping. The rate constant of the reaction of 4a with TEMPO was similar to that of n-BuCH=C=O (1b), while 3a was 4.3 times more reactive, indicating cyclopropyl stabilization of the incipient radical.     

Investigations of thermal polymerization in the stable free‐radical polymerization of 2‐vinylnaphthalene

The feasibility of utilizing stable free‐radical polymerization (SFRP) in the synthesis of well‐defined poly(2‐vinylnaphthalene) homopolymers has been investigated. Efforts to control molecular weight by manipulating initiator concentration while maintaining a 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (TEMPO):benzoyl peroxide (BPO) molar ratio of 1.2:1 proved unsuccessful. In addition, systematic variations of the TEMPO: BPO molar ratio did not result in narrow molecular weight distributions. In situ Fourier transform infrared spectroscopy (FTIR) indicated that the rate of monomer disappearance under SFRP and thermal conditions were identical. This observation indicated a lack of control in the presence of the stable free radical, TEMPO. The similarities in chemical structure between styrene and 2‐vinylnaphthalene suggested thermally initiated polymerization occurred via the Mayo mechanism. A kinetic analysis of the thermal polymerization of styrene and 2‐vinylnaphthalene suggested that the additional fused ring in 2‐vinylnaphthalene increased the propensity for thermal polymerization. The observed rate constant for thermal polymerization of 2‐vinylnaphthalene was determined using in situ FTIR spectroscopy and was one order of magnitude greater than styrene, assuming pseudo‐first‐order kinetics. Also, an Arrhenius analysis indicated that the activation energy for the thermal polymerization of 2‐vinylnaphthalene was 30 kJ/mol less than styrene. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 583–590, 2002; DOI 10.1002/pola.10131     

Homolysis of weak Ti-O bonds: experimental and theoretical studies of titanium oxygen bonds derived from stable nitroxyl radicals

Titanium-oxygen bonds derived from stable nitroxyl radicals are remarkably weak and can be homolyzed at 60 degrees C. The strength of these bonds depends sensitively on the ancillary ligation at titanium. Direct measurements of the rate of Ti-O bond homolysis in Ti-TEMPO complexes Cp2TiCl(TEMPO) (3) and Cp2TiCl(4-MeO-TEMPO) (4) (TEMPO = 2,2,6,6-tetramethylpiperidine-N-oxyl, 4-MeO-TEMPO = 2,2,6,6-tetramethyl-4-methoxypiperidine-N-oxyl) were conducted by nitroxyl radical exchange experiments. Eyring plots gave the activation parameters, deltaH++ = 27(+/- 1) kcal/mol, deltaS++ = 6.9(+/- 2.3) eu for 3 and deltaH++ = 28(+/- 1) kcal/mol, deltaS++ = 9.0(+/- 3.0) eu for 4, consistent with a process involving the homolysis of a weak Ti-O bond to generate the transient Cp2Ti(III)Cl and the nitroxyl radical. Thermolysis of the titanocene TEMPO complexes in the presence of epoxides leads to the Cp2Ti(III)Cl-mediated ring-opening of the epoxide followed by trapping by the nitroxyl radical. The X-ray crystal structure of the Ti-TEMPO derivative, Cp2TiCl(4-MeO-TEMPO) (4), is reported. DFT (B3LYP/6-31G*) calculations and experimental studies reveal that the strength of the Ti-O bond decreases dramatically with the number of cyclopentadienyl groups on titanium. The calculated Ti-O bond strength of the monocyclopentadienyl complex 2 is 43 kcal/mol, whereas that of the biscyclopentadienyl complex 3 is 17 kcal/mol, a difference of 26 kcal/mol. These studies reveal that the strength of these Ti-O bonds can be tuned over an interesting and experimentally accessible temperature range by appropriate ligation on titanium.     

Transition states for deactivation reactions in the modeled 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐mediated free‐radical polymerization of acrylonitrile

The geometries and energetics of transition states (TS) for radical deactivation reactions, including competitive combination and disproportionation reactions, have been studied for the modeled 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO)‐mediated free‐radical polymerization of acrylonitrile with quantum mechanical calculations at the DFT/UB3‐LYP/6‐311+G(3df,2p)//(U)AM1 level of theory (where DFT is density functional theory, AM1 is Austin model 1, and UAM1 is unrestricted Austin model 1). A method providing reasonable starting geometries for an effective search for TS between the TEMPO radical and 1‐cyanopropyl radical mimicking the growing polyacrylonitrile macroradical is shown. For the hydrogen atom abstraction reaction by the TEMPO radical from the 1‐cyanopropyl radical, practically one TS has been found, whereas for the combination reaction of the radicals, several TS have been found, mainly differing in out‐of‐plane angle α of the N? O bond in the TEMPO structure. α in the TS is correlated with the activation energy, ΔE, determined from the single‐point calculation at the DFT UB3‐LYP/6‐311+G(3df, 2p)//UAM1 level for the combination reaction of CH₃AN· with the TEMPO radical. The theoretical activation energy for the coupling reaction from DFT UB3‐LYP/6‐311+G(3df, 2p)//UAM1 calculations has been estimated to be 11.6 kcal mol^?1, that is, only about 4.5 times smaller than ΔE for the disproportionation reaction obtained with the DFT UB3‐LYP/6‐311+G(3df, 2p)//(U)AM1 approach. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 914–927, 2006     

Radical reactions of a stable N-heterocyclic silylene: EPR study and DFT calculation

Reaction of the stable silylene, 1,3-di-tert-butyl-1,3,2-diazasilol-2-ylidene, with the free radical sources TEMPO, Hg[P(O)(OPri)2]2, (CO)3CpM-MCp(CO)3 (M = W, Mo), (CO)5Re-Re(CO)5, and toluene leads to radical adducts. The EPR spectra of these radicals indicate that the unpaired electron is delocalized over the silicon-containing five-membered ring.     

IrII(ethene): metal or carbon radical?

One-electron oxidation of [(Me(n)tpa)Ir(I)(ethene)]+ complexes (Me(3)tpa = N,N,N-tri(6-methyl-2-pyridylmethyl)amine; Me(2)tpa = N-(2-pyridylmethyl)-N,N,-di[(6-methyl-2-pyridyl)methyl]-amine) results in relatively stable, five-coordinate Ir(II)-olefin species [(Me(n)tpa)Ir(II)(ethene)](2+) (1(2+): n = 3; 2(2+): n = 2). These contain a "vacant site" at iridium and a "non-innocent" ethene fragment, allowing radical type addition reactions at both the metal and the ethene ligand. The balance between metal- and ligand-centered radical behavior is influenced by the donor capacity of the solvent. In weakly coordinating solvents, 1(2+) and 2(2+) behave as moderately reactive metallo-radicals. Radical coupling of 1(2+) with NO in acetone occurs at the metal, resulting in dissociation of ethene and formation of the stable nitrosyl complex [(Me(3)tpa)Ir(NO)](2+) (6(2+)). In the coordinating solvent MeCN, 1(2+) generates more reactive radicals; [(Me(3)tpa)Ir(MeCN)(ethene)](2+) (9(2+)) by MeCN coordination, and [(Me(3)tpa)Ir(II)(MeCN)](2+) (10(2+)) by substitution of MeCN for ethene. Complex 10(2+) is a metallo-radical, like 1(2+) but more reactive. DFT calculations indicate that 9(2+) is intermediate between the slipped-olefin Ir(II)(CH(2)=CH(2)) and ethyl radical Ir(III)-CH(2)-CH(2). resonance structures, of which the latter prevails. The ethyl radical character of 9(2+) allows radical type addition reactions at the ethene ligand. Complex 2(2+) behaves similarly in MeCN. In the absence of further reagents, 1(2+) and 2(2+) convert to the ethylene bridged species [(Me(n)tpa)(MeCN)Ir(III)(mu(2)-C(2)H(4))Ir(III)(MeCN)(Me(3)tpa)](4+) (n = 3: 3(4+); n = 2: 4(4+)) in MeCN. In the presence of TEMPO (2,2,6,6-tetramethyl-1-piperidinyloxo), formation of 3(4+) from 1(2+) in MeCN is completely suppressed and only [(Me(3)tpa)Ir(III)(TEMPO(-))(MeCN)](2+) (7(2+)) is formed. This is thought to proceed via radical coupling of TEMPO at the metal center of 10(2+). In the presence of water, hydrolysis of the coordinated acetonitrile fragment of 7(2+) results in the acetamido complex [(Me(3)tpa)Ir(III)(NHC(O)CH(3)))(TEMPOH)](2+) (8(2+)).     

Light-fluorous TEMPO: reagent, spin trap and stable free radical

The synthesis of two light-fluorous TEMPO derivatives is reported, along with their fluorous-organic solvent partition coefficients and their ESR spectra. Applications of the fluorous-TEMPO reagents in oxidation reactions and as radical traps are discussed.     

Ketene reactions with the aminoxyl radical tempo: preparative, kinetic, and theoretical studies

Tetramethylpiperidinyloxy (TEMPO, TO*) reacts with ketenes RR(1)C=C=O generated by either Wolff rearrangement or by dehydrochlorination of acyl chlorides to give products resulting from addition of one TEMPO radical to the carbonyl carbon and a second to the resulting radical. Reactions of phenylvinylketenes 4b and 4f, phenylalkynylketene 4c, and the dienylketene AcOCMe=CHCH=CHCMe=C=O (11) occur with allylic or propargylic rearrangement. Even quite reactive ketenes were generated as rather long-lived species by photochemical Wolff rearrangement in isooctane solution, characterized by IR and UV, and used for kinetic studies. The rate constants of TEMPO addition to eight different ketenes have been measured and give a qualitative correlation of log k(2)(TEMPO) = 1.10 log k(H(2)O) -3.79 with the rate constants for hydration of the same ketenes. Calculations at the B3LYP/6-311G//B3LYP/6-311G level are used to elucidate the ring opening of substituted cyclobutenones leading to vinylketenes and of 2,4-cyclohexadienone (17) forming 1,3,5-hexatrien-1-one (18).