可溶液加工蓝色聚集诱导发光小分子的合成及其器件性能（英文）

利用四苯基甲烷中碳原子特殊的sp~3轨道杂化结构来打断并控制分子内共轭程度,并采用硅原子替换四苯基甲烷中的碳原子合成四苯基硅烷.将这两种结构作为核,在其四周以四苯乙烯(TPE)或三苯乙烯(tri PE)修饰,设计并合成了六个具有聚集诱导发光(AIE)效应的小分子.这些分子均可以溶解在常见有机溶剂中并具有良好的热稳定性.通过溶液旋涂法将其应用到有机电致发光器件(OLED)中,得到最好的器件效率为亮度最大值(L_(max))1730 cd·m~(-2),电流效率最大值(Lmax)2.21 cd·A~~(-1),功率最大值(η_(p,max))0.77 lm·W~(-1),外量子效率最大值(η_(ext,max))1.01%.     

基于苯基修饰策略的新型可溶液加工红光铱配合物的设计、合成及电致发光性能研究

利用向环金属配体的C-Ir键的对位进行苯基取代这一结构修饰策略,成功合成了两种新型铱（III）配合物（3PhNbt）₂Ir（acac）和（3OMePhNbt）₂Ir（acac）.相较其橙光发射的母体化合物（Nbt）₂Ir（acac）,两个目标化合物的抗结晶性、非晶态热稳定性及溶解性均有显著提高,其磷光发射带也发生了5~10 nm的红移.以（3PhNbt）₂Ir（acac）和（3OMePhNbt）₂Ir（acac）为发光客体材料所制备的单层溶液加工电致红光器件,其最大发光亮度分别为1830 cd·m^-2和6630 cd·m^-2,最大电流效率分别为2.4 cd·A^-1和8.7 cd·A^-1,CIE1931色坐标分别为（0.61,0.39）和（0.62,0.38）.相比之下,以母体化合物（Nbt）₂Ir（acac）为发光客体材料所制备的参比器件,其最大发光亮度则为1620 cd·m^-2,最大电流效率仅为1.5 cd·A^-1,CIE1931色坐标为（0.59,0.41）.上述研究结果表明：向C-Ir键对位进行苯基修饰可以在提高铱（III）配合物的可溶液加工性能的同时,获得更为红移的电致发光波长,是一种简单而有效的红光铱（III）配合物的分子设计策略.     

两种基于氮杂环结构铱(Ⅲ)配合物的合成及有机电致发光性能

以苯基嘧啶/吡啶基嘧啶为母核, 同时引入2个三氟甲基(CF₃)合成了2-[3,5-二（三氟甲基）苯基]-5-氟基嘧啶(tfmphfppm)和2-[2,6-二（三氟甲基）-4-吡啶基]-5-氟基嘧啶(tfmpyfppm)主配体, 并以2-(5-苯基-1,3,4-噁二唑-2-)苯酚(pop)为辅助配体合成了2种铱(III)配合物Ir(tfmphfppm)₂(pop)和Ir(tfmpyfppm)₂(pop), 其发射光谱峰分别位于484和504 nm, 分别属于蓝绿光和绿光发射, 发光量子效率分别达到76%和89%. 由于氮杂环和2,5-二苯基-1,3,4-噁二唑基团的存在, 配合物具有较低的最低未占据分子轨道(LUMO)能级和较高的电子迁移率. 以2种 铱(III)配合物为发光中心制备的有机电致发光器件(OLED)显示了较好的器件性能, 其最大亮度(L_max)、 最大电流效率(η_{c, max})、 最大功率效率(η_{p, max})和最大外量子效率(EQE_max)分别为33379 cd/m², 76.55 cd/A, 31.59 lm/W和26.7%; 并且该器件显示了比较小的效率滚降, 在亮度为1000 cd/m²时, 器件的η_c仍然可以达到72.71 cd/A. 本文结果表明, 氮杂环、 2,5-二苯基-1,3,4-噁二唑和三氟甲基基团可以有效提高铱(Ⅲ)配合物的发光性能和电子迁移率, 从而提高器件的性能.     

氧化石墨烯掺杂PEDOT:PSS作为空穴注入层对有机发光二极管发光性能的影响

研究了氧化石墨烯(GO)掺杂聚(3,4-亚乙二氧基噻吩):聚(苯乙烯磺酸) (PEDOT:PSS)作为空穴注入层对有机发光二极管发光性能的影响. 在PEDOT:PSS水溶液中掺入GO, 经过湿法旋涂和退火成膜后, 不仅提高了空穴注入层的空穴注入能力和导电率, 透光率也得到了相应的提高, 从而使得有机发光二极管(OLED)器件的发光性能得到了提升. 通过优化GO掺杂量发现, 当GO掺杂量为0.8%(质量分数)时, 空穴注入层的透光率达到最大值(96.8%), 此时获得的OLED器件性能最佳, 其最大发光亮度和最大发光效率分别达到17939 cd·m^-2和3.74 cd·A^-1. 与PEDOT:PSS 作为空穴注入层的器件相比, 掺杂GO后器件的最大发光亮度和最大发光效率分别提高了46.6%和67.6%.     

含螺环位阻铱(III)配合物的共轭结构调控及其电致发光性能研究

基于螺[芴-9,9'-氧杂蒽]的位阻结构,在其芴端连接苯并噻唑构成共轭扩展的环金属配体,并成功合成了相应的均配、面式构型铱（III）配合物fac-Ir（SFXbtz）₃.配合物的最强发射峰位于587 nm,在635 nm处伴有肩峰发射;其在溶液中的磷光寿命为316 ns,光致发光量子产率达到64.7%.以fac-Ir（SFXbtz）₃为发射材料,在高掺杂浓度下分别制备了橙光电致发光器件及与蓝光材料FIrpic（双（4,6-二氟苯基吡啶-N,C²）吡啶甲酰合铱）组合的二元白光器件.以CBP（4,4'-二（9-咔唑）联苯）为主体材料的橙光器件最高电流效率和功率效率为10.8 cd·A^-1和8.4 lm·W^-1,最大亮度为7217 cd·m^-2.二元白光器件最高电流效率和功率效率为11.6 cd·A^-1和8.0 lm·W^-1,最大亮度为8763 cd·m^-2,在3~9 V操作电压下CIE1931色坐标稳定.结果表明：协同利用螺环芳烃的共轭结构和位阻结构优势,是获得低成本、本征光电性质良好及可高浓度掺杂的磷光铱（III）配合物的便捷方法.     

1,2,3,4-四苯基丁二烯二环戊二烯铌的合成和顺磁共振研究

合成1,2,3,4-四苯基丁二烯二环戊二烯妮(Ⅳ)金属环化合物.测定它的甲苯溶液和玻璃态固体多晶EPR波谱.由计算机模拟分析得到各向异性EPR参数:g_x=1.9915,g_y=2.0017,g_z=2.0005;T_x=-69.5G,T_y=-103.2G,T_z=-18.0G和最高占据分子轨道中d_z²及d_x²-y²混合系数比α²/b²=22.0.     

不同受体结构染料共敏化对染料敏化太阳电池性能的影响

为了拓宽染料敏化太阳电池对太阳光谱的响应范围,提高电池的光电转换效率,将两种含有不同受体结构（绕丹宁-3-乙酸基（RA）和氰基丙烯酸基（CA））的三苯胺染料（TR1和TC1）进行共敏化。TR1染料平伏吸附在TiO₂表面,而TC1染料直立吸附在TiO₂表面。将两种染料按照不同摩尔比共敏化TiO₂后,TC1占据TR1的部分位置,拓展光谱的同时也抑制了电荷复合,电子寿命较TR1敏化的太阳电池长。在TR1与TC1摩尔比为5：5的共敏剂溶液敏化的共敏电池器件中,短路光电流密度（J_sc）为11.7 mA/cm²,开路电压（V_oc）为704 mV,填充因子（FF）为0.73,光电转换效率（η）为6.03%。该结果明显优于单一染料敏化的电池器件。     

含苯并噻二唑的吩噻嗪染料分子的设计合成及其在染料敏化太阳能电池中的应用

设计合成了三种含苯并噻二唑的吩噻嗪类有机染料光敏剂JY50~JY52,在对其光物理和电化学性质进行研究的基础上,使用三种染料对纳米TiO₂电极进行敏化制备太阳能电池器件,并系统研究了其光电转化效率及电荷传输阻抗等光伏特性.研究结果表明,在染料分子中引入共轭基团有助于其摩尔吸光系数的提升,从而提升光电流.两个长烷基链的引入能够有效地抑制染料分子激发态电子在TiO₂光阳极表面的电子复合,从而提升其电子注入效率.其中,在AM 1.5（100 mW·cm^-2）的模拟光强下,基于碘电解质的染料JY51电池器件获得了7.61%的光电转化效率.     

光敏型季铵盐类阳离子表面活性剂的合成及表面活性和泡沫性质

本文报道了一种光敏型的阳离子表面活性剂（AZO），其分子结构中含有偶氮苯基团，并研究了光照对表面活性和泡沫性能的影响。经紫外光照射后，表面活性剂的饱和吸附量（Г_max）减小，临界胶束浓度（cmc）、最低表面张力（γ_cmc）和分子极限占有面积（A_min）增大；气泡数目增多，直径变小，发泡能力和泡沫稳定性降低。实验结果证实，该表面活性剂的表面活性和泡沫稳定性可以用光照进行调控。     

四苯基卟啉锌薄膜/K+交换玻璃光波导传感器检测挥发性有机化合物气体

利用Alder法合成了四苯基卟啉锌配合物并对它进行表征;用匀胶机将一定浓度的四苯基卟啉锌溶液做成薄膜固定在钾离子(K⁺)交换玻璃光波导表面研制了高灵敏的四苯基卟啉锌薄膜/K⁺交换玻璃光波导传感器,并对挥发性有机气体进行检测。 实验结果表明,在室温下该传感器对低浓度的苯乙烯、二甲苯、甲苯等蒸气具有一定的响应,其中对苯乙烯的响应最大;能够检测到1×10^-9(V(苯乙烯)/V(空气))的苯乙烯蒸气,其响应和恢复时间分别为2和7 s。 该传感器具有灵敏度高,回复-响应时间快,可逆性等特点。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.