可控交联聚醚醚酮的动态力学性能

动态力学分析技术(DMA)是研究聚合物性能的重要方法之一．动态力学实验可以检测聚合物的玻璃化转变温度和次级松弛过程,直接与聚合物的链结构和聚集态结构密切相关,聚合物的化学组成、支化和交联、结晶和取向、增塑和共混等结构因素的变化,都与分子运动状态的变化密切相关,而分子运动的变化又能灵敏地反映在动态力学性能上,     

Mechanism for the formation of gas-phase protonated alcohol-ether adducts by VUV laser ionization and density-functional calculations

The neutral vapors above liquid alcohol/ether mixtures, (diethyl ether/methanol, diethyl ether/ethanol, tetrahydrofuran/methanol, and tetrahydrofuran/ethanol) were co-expanded with He in a supersonic jet, ionized with a 118-nm vacuum ultraviolet laser, and detected in a time-of-flight mass spectrometer. In each case, features attributed to protonated alcohol-ether dimers and protonated ether monomers were observed, as well as those ions obtained by ionizing neat alcohol or ether samples alone. Theoretical calculations, carried out to establish the energetics of the various possible reactions leading to the formation of the observed binary adducts, indicate that the most thermodynamically favorable pathway corresponds to the addition of a protonated alcohol monomer to neutral ether.     

Enhanced diastereoselectivity in beta-mannopyranosylation through the use of sterically minimal propargyl ether protecting groups

[reaction: see text] 2-O-Propargyl ethers are shown to be advantageous in the 4,6-O-benzylidene acetal directed beta-mannosylation reaction. The effect is most pronounced when the O3 protecting group is a bulky silyl ether or a glycosidic bond; however, even with a 3-O-benzyl ether, the use of a 2-O-propargyl ether results in a significant increase in diastereoselectivity. The beneficial effect of the propargyl ether is thought to be a combination of its minimal steric bulk, as determined by a measurement of the steric A-value and of its moderately disarming nature, as reflected in the pKa of propargyl alcohol. Conversely, the application of a 3-O-propargyl ether in the benzylidene acetal directed mannosylation has a detrimental effect on stereoselectivity, for which no explanation is at present available. Deprotection is achieved by base-catalyzed isomerization of the propargyl ether group to the corresponding allenyl ether, followed by oxidative cleavage with N-methylmorpholine N-oxide and catalytic osmium tetroxide.     

Acyl Iodides in Organic Synthesis: VI. Reactions with Vinyl Ethers

Reactions of acetyl iodide with butyl vinyl ether, 1,2-divinyloxyethane, phenyl vinyl ether, 1,4-di-vinyloxybenzene, and divinyl ether were studied. Vinyl ethers derived from aliphatic alcohols (butyl vinyl ether and 1,2-divinyloxyethane) react with acetyl iodide in a way similar to ethyl vinyl ether, i.e., with cleavage of both O–Csp2 and Alk–O ether bonds. From butyl vinyl ether, a mixture of vinyl iodide, butyl acetate, vinyl acetate, and butyl iodide is formed, while 1,2-divinyloxyethane gives rise to vinyl iodide, vinyl acetate, and 2-iodoethyl acetate. The reaction of acetyl iodide with divinyl ether involves cleavage of only one O–Csp2 bond, yielding vinyl acetate and vinyl iodide. In the reactions of acetyl iodide with phenyl vinyl ether and 1,4-divinyloxybenzene, only the O–CVin bond is cleaved, whereas the O–CAr bond remains intact.     

Gas-phase reactions of brominated diphenyl ethers with OH radicals

A small volume reaction chamber coupled to a mass spectrometer was used to study the gas-phase kinetics and mechanism of the reaction of OH radicals with diphenyl ether and seven polybrominated diphenyl ethers (PBDEs) with 1-2 bromines. Relative rate constants for these reactions were determined using isopropyl nitrite photolysis in He-air mixtures at approximately 740 Torr between the temperatures of 326-388 K. The Arrhenius expression for each compound was used to extrapolate the following OH rate constants at 298 K (in units of 10(-12) cm3 molecule(-1) s(-1), with 95% confidence intervals): diphenyl ether, 7.45 +/- 0.13; 2-bromodiphenyl ether, 4.7; 3-bromodiphenyl ether, 4.6; 4-bromodiphenyl ether, 5.7; 2,2'-dibromodiphenyl ether, 1.3; 2,4-dibromodiphenyl ether, 3.8; 3,3-dibromodiphenyl ether, 3.2; and 4,4'-bromodiphenyl ether, 5.1. The measured OH rate constants are in reasonable agreement with those predicted by structure activity relationships. Positive temperature dependences of these OH rate constants are observed for all compounds measured except for diphenyl ether and 4,4'-dibromodiphenyl ether. Bromophenols (in yields up to 20% relative to the amount of PBDE consumed) and Br2 were characterized as products of these reactions, suggesting that OH addition to ipso positions of these brominated aryls may be an important reaction pathway.     

Electrochemical fluorination of chlorine-containing ethers

The electrochemical fluorination of chlorine-containing ethers has been studied. In general, it was found that a chlorine bonded to an a-carbon atom in the ethers was readily removed during electrochemical reaction in anhydrous hydrogen fluoride, whilst a chlorine bonded to the β-carbon atom was retained to yield β-chlorinated polyfluoroethers.Through the use of this method, several new chloropolyfluoroethers, e.g. 2-chloro-1,1,2,2-tetrafluoroethyl difluoromethyl ether, 2,2-dichloro-1,1,2-trifluoroethyl trifluoromethyl ether 2,2-dichloro-1,1,2-trifluoroethyl difluoromethyl ether, 2,2-dichloro-1,1,2-trifluoroethyl chlorodifluoromethyl ether, 2-chloro-1,1,2,2-tetrafluoroethyl chlorodifluoromethyl ether and 2,2-trichloro-1,1-difluoroethyl trifluoromethyl ether, have isolated and characterized.     

Is the ether group hydrophilic or hydrophobic?

A series of six surfactants, each with two ether oxygens within otherwise all-hydrocarbon chains, were synthesized and examined for their colloidal properties. Since an ether oxygen is sterically and conformationally similar to the methylene group it has replaced, the ether effect on micellization should stem mainly from solvation of the oxygen and, possibly, disrupted hydrophobicity of its adjacent carbons. It was found that critical aggregation values among the surfactants differ only modestly despite the total length of the ether-separated carbon segments ranging from 12 to 18. Shorter ether surfactants with only 12 or 14 total carbons appear to form small, loose aggregates owing, presumably, to a mild hydrophilicity of the ether groups. A surfactant with 18 chain carbons has a greater tendency to associate hydrophobically, but this is counterbalanced by a relatively water-free environment encountered by the ether groups within a more conventional micelle interior. The result is a leveling effect in which the critical aggregation concentration (cac) loses it sensitivity to chain length. Above their cac's, none of the ether surfactants is a good solubilizer of tetramethysilane or mesitylene. This is not necessarily a predictable finding since it was conceivable that the presence of interior ether groups might actually enhance solubilization (much as ether is a better solvent than hexane). Foamability and solid adsorption studies also indicate that the ethers impair surface activity. In response to the question posed in the paper's title, two ether groups are not sufficiently hydrophilic to prevent aggregation, but they do manage to alter the micelles' morphology and properties considerably.     

Phase equilibria of the quaternary system acetic acid—ethylene glycol monoethyl ether acetate—ethylene glycol monoethyl ether—water

The synthesis of ethylene glycol monoethyl ether acetate by esterification of ethylene glycol monoethyl ether with acetic acid is of industrial interest. The following experimental determinations were carried out: vapour—liquid equilibria of the binary systems acetic acid—ethylene glycol monoethyl ether acetate and acetic acid—ethylene glycol monoethyl ether; liquid—liquid equilibrium of the binary system water—ethylene glycol monoethyl ether acetate; solubility curves of the ternary systems water—ethylene glycol monoethyl ether acetate—ethylene glycol monoethyl ether and water—acetic acid—ethylene glycol monoethyl ether acetate.The parameters of a model able to describe the phase equilibria of the whole system have been identified. Liquid—liquid, as well as vapour—liquid equilibrium data, are satisfactorily correlated with an unique choice of parameters.     

Synthesis of bastadin-6 trimethyl ether,a novel 28-membered ring lactam

Bastadin-6 trimethyl ether, a 28-membered ring lactam, was synthesized by means of phenolic exidation of dibromobastadin-2 trimethyl ether with thallium (III0 nitrate (TTN) leading to the formation of the corresponding macrocyclic biphenyl ether as a key step. From bastadin-2 trimethyl ether, a 26-membered ring compound was also synthesized.     

Study on dynamics characteristics of wet air oxidation of non-ionic surfactants

Wet air oxidation is an effective method to deal with highly concentrated nondegradable emulsification wastewater which contains non-ionic surfactants. This article illustrates our investigation on dynamic characteristics of wet air oxidation of typical non-ionic surfactants like polyether, phenol ether and widely used alcohol ether. The experimental results indicated that the oxidation rate of polyether, phenol ether and alcohol ether obviously ascended as the temperature rose. A good oxidation effect was available at 240℃. The TOC removal rate could reach 88.0%, 94% and 91.5%, after 125 min reaction. Alcohol ether was prone to an easier oxidation compared with polyether and phenol ether when the temperature was 220℃ or below. The oxidation rate of alcohol ether was higher than that of polyether at 160℃, while the oxidation rate of polyether was higher than that of phenol ether between 180℃ and 220℃. During the later period of the reaction at 240℃, the rate of phenol ether was higher than that of alcohol ether, which was still higher than that of polyether. Partitioned first order kinetics model analy-sis showed that the apparent activation energy of alcohol ether was lower than that of both polyether and phenol ether in the leading stage and lagging stage, and it was easy to acquire a higher oxidation rate for alcohol ether at low temperature. Three parameter general dynamics model analyses showed that the reason why the oxidation rate of polyether was lower than that of alcohol ether was that the oxidation of polyether was more apt to be converted to intermediate production than that of alcohol ether, whereas between 200℃ and 220℃, the direct oxidation rate of polyether and the oxidation rate of intermediate product were obviously lower than that of alcohol ether. The apparent activation energy of direct and indirect oxidation of polyether was 43.37 and 60.45 kJ?mol?1, respectively, while the corre-sponding apparent activation energy of alcohol was 38.74 and 58.09 kJ·mol?1, respectively.     

Simultaneous determination of NOGE-related and BADGE-related compounds in canned food by ultra-performance liquid chromatography–tandem mass spectrometry

An improved analytical method enabling rapid and accurate determination and identification of bisphenol F diglycidyl ether (novolac glycidyl ether 2-ring), novolac glycidyl ether 3-ring, novolac glycidyl ether 4-ring, novolac glycidyl ether 5-ring, novolac glycidyl ether 6-ring, bisphenol A diglycidyl ether, bisphenol A (2,3-dihydroxypropyl) glycidyl ether, bisphenol A (3-chloro-2-hydroxypropyl) glycidyl ether, bisphenol A bis(3-chloro-2-hydroxypropyl) ether, and bisphenol A (3-chloro-2-hydroxypropyl) (2,3-dihydroxypropyl) ether in canned food and their contact packaging materials has been developed by using, for the first time, ultra-performance liquid chromatography coupled with tandem mass spectrometry. After comparison of electrospray ionization and atmospheric pressure chemical ionization in positive and negative-ion modes, tandem mass spectrometry with positive electrospray ionization was chosen to carry out selective multiple reaction monitoring analysis of novolac glycidyl ethers, bisphenol A diglycidyl ether, and its derivatives. The analysis time is only 5.5 min per run. Limits of detection varied from 0.01 to 0.20 ng g(-1) for the different target compounds on the basis of a signal-to-noise ratio (S/N) = 3; limits of quantitation were from 0.03 to 0.66 ng g(-1). The relative standard deviation for repeatability was <8.01%. Analytical recovery ranged from 87.60 to 108.93%. This method was successfully applied to twenty samples of canned food and their contact packaging materials for determination of migration of NOGE, BADGE, and their derivatives from can coatings into food.     

13C nuclear magnetic resonance studies on the stereochemical configurations of 2,4-dimethoxypentane and poly(alkyl vinyl ethers)

¹³C nuclear magnetic resonance (CMR) spectra were obtained for 2,4-dimethoxypentane, which is a model compound of poly(methyl vinyl ether), and the effects of the solvent and temperature on the chemical shifts were investigated. CMR spectra of poly-(alkyl vinyl ethers) were also determined and analyzed. The diad tacticities were obtained from β-methylene carbon resonances of poly(methyl vinyl ether), poly(ethyl vinyl ether), and poly(isobutyl vinyl ether), but not from those of poly(isopropyl vinyl ether) and poly(tert-butyl vinyl ether). The methoxyl carbon resonance of poly(methyl vinyl ether) and the ethoxyl methylene carbon resonance of poly(ethyl vinyl ether) showed splittings corresponding to pentad and triad sequences, respectively. The α-methine and quaternary carbon resonances of poly(tert-butyl vinyl ether) showed splittings corresponding to pentad and triad sequences, respectively.     

冠醚桥接苯并菲二聚体合成的新途径

本研究借鉴合成冠醚的Willianmson反应,通过缓慢滴加二氯乙醚合成了重要中间体乙氧基醚链接的苯并菲二聚体,且避免了2,3-二羟基四戊烷氧基苯并菲自身成环反应所导致单一冠醚苯并菲的生成.进一步以该中间体为原料,通过缩合反应,最终得到了冠醚桥接苯并菲二聚体,并用1H NMR,13C NMR和MALDI-TOF质谱对产物的结构和纯度进行了表征.     

Applications of Fourier Transform Raman spectroscopy in the synthetic polymer field

The application of FT Raman spectroscopy in the study of a wide range of polymer systems is discussed. The following have been included to give the reader an insight into the variety of areas which can successfully be studied using this important technique: the problem of crystallinity; nylons; poly(aryl ether ketone) and poly(aryl ether ether ketone); poly(aryl ether ether sulphone) and poly(aryl ether sulphone); epoxy resin curing; copolymers; copolymers of tetrafluoroethylene and hexafluoropropylene; polythioethers; and gels.     

Convergent assembly of polycyclic ethers via acyl radical addition to unactivated enol ether

A new convergent strategy for assembling 6/6- and 6/7-fused ether ring systems was developed. The key features in our method include Ag+-promoted facile formation of chemically labile enol ether from O,S-acetal and addition of an acyl radical to unactivated enol ether to cyclize a six- or seven-membered ether ring. [reaction: see text]     

Imide-aryl ether ketone block copolymers

Imide-aryl ether ketone block copolymers were prepared and their morphology and thermal and mechanical properties investigated. Two aryl ether ketone blocks were incorporated; the first was an amorphous block derived from bisphenol–A and the second block was a semi-crystalline poly(aryl ether ether ketone) prepared from a soluble and amorphous ketimine precursor. Bis(amino) aryl ether ketone and aryl ether ketimine oligomers were prepared via a nucleophilic aromaic substitution reaction with molecular weights ranging from 6,000 to 12,000 g/mol. The oligomers were co-reacted with 4,4′-oxydianiline (ODA) and pyromellitic dianhydride (PMDA) diethyl ester diacyl chloride in N-methyl–2-pyrrolidone (NMP) in the presence of N-methylmorpholine. The copolymer compositions, determined by H-NMR, of the resulting amic ester based copolymers ranged from 8 to 50 wt % aryl ether ketone or ketimine content. Prior to imide formation, the ketimine moiety of the aryl ether ketimine block was hydrolyzed (p-toluene sulfonic acid) to the ketone form producing the aryl ether ether ketone block. Compositions of this block were maintained low to retain solubility. Solutions of the copolymers were cast and cured to effect imidization, producing clear films with high moduli (ca. 2200 MPa) and elongations (33–100%). The copolymers displayed good thermal stability with decomposition temperatures in excess of 450°C. Multiphase morphologies were observed irrespective of the co-block type, block length or composition. © 1992 John Wiley & Sons, Inc.     

Stereospecific debenzylative cycloetherification of carbohydrate-derived allylic alcohols, ethers and esters to form vinyl C-furanosides

Benzyl ether protected polyhydroxylated alkene compounds containing allylic alcohol, ether or ester functionality undergo a stereospecific cyclisation reaction upon treatment with TFA-acetonitrile-toluene with inversion of configuration at the allylic position and loss of a benzyl ether to give tetrahydrofurans.     

醚的初始暗氧化反应机理的研究

有机化合物的空气氧化是一个历史悠久的研究课题。早在1851年Schonbein[1]就注意到醚在空气中会被氧化产生过氧化物。本世纪初,Clover和Milas分析了醚的空气氧化产物,并且对醚的氧化机理,进行了研究。     

Novel photocurable monomers: The synthesis of difunctional vinyl ethers with a phosphonate group and difunctional 1‐propenyl ethers with a phosphonate group and their photoinitiated cationic polymerization

Phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were prepared by the regioselective addition reaction of glycidyl vinyl ether (GVE) or 1‐propenyl glycidyl ether with diaryl phosphonates with quaternary onium salts as catalysts. The reaction of GVE with bis(4‐chlorophenyl) phenylphosphonate gave bis[1‐(4‐chlorophenoxy methyl)‐2‐(vinyloxy)ethyl]phenylphosphonate in a 68% yield. The structures of the resulting phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were confirmed by IR and ¹H NMR spectra and elemental analysis. Photoinitiated cationic polymerizations of the resulting phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were investigated with photoacid generators. The polymerization of vinyl ether groups and 1‐propenyl ether groups of the obtained monomers proceeded very smoothly with a sulfonium‐type cationic photoinitiator, bis[4‐(diphenylsulfonio)phenyl]sulfide‐bis(hexafluorophosphate), upon UV irradiation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3105–3115, 2005     

Poly(vinyl ether)s and poly(propenyl ether)s containing mesogenic groups: A new class of side-chain liquid-crystalline polymers

A new series of thermotropic liquid-crystalline polymers, poly(vinyl ether)s and poly(propenyl ether)s, containing the mesogen 4-methoxy-4′-hydroxybiphenyl in the side chain and different spacers between the mesogens and the backbone were synthesized and characterized by DSC and optical microscopy. Their mesomorphic behavior was compared to that of the corresponding polymethacrylates. In general the poly(propenyl ether)s showed lower transition temperatures and larger thermal stability ranges of their mesophases than the respective polymethacrylates, reflecting the effect of substituting the rigid ester bond connecting the spacer to the backbone in polymethacrylates by a more flexible ether bond. Also, poly(propenyl ether)s showed more ordered mesophases than the polymethacrylates, suggesting that a better decoupling of the mesogen and polymer backbone is obtained through the ether linkage.