The interfacial crack between two dissimilar elastic-plastic materials

This paper presents an exact asymptotic analysis on the interfacial crack between two dissimilar elastic-plastic materials. These two materials have identical hardening exponent (n ₁=n ₂) but different hardening coefficient (α₁ ≠ α₂). Two groups of the near-crack-tip fields have been obtained, which not only satisfy the continuity of both tractions (σ_θ, τ_rθ) and displacements (u _r ,u _θ) on the interface, but also meet the traction free conditions on the crack faces. The first group of fields have the mode mixityM ^P quite close toM ^P =1 (MODE I) within the whole range 0 ≤ α₁/α₂ < ∞. As for the second group of fields, which is only obtained within the narrow range 0.9 ≤ α₁/α₂ ≤ 1, it is found that the mode mixity changes sharply with the ratio value α₁/α₂. The project supported by National Natural Science Foundation of China     

Asymptotic fields for interface crack in elastic-plastic material

Exact mathematical analyses are presented for interface crack between dissimilar elastic-plastic materials. The deformation theory of plasticity is used. For two kinds of boundary conditions on crack faces: (1) traction free and (2) frictionless contact, the asymptotic separable solutions of the HRR type with full continuity are obtained, which exist only for special mixity parameterM ^p. For any assignedM ^p, the separable solutions of the HRR type which contained weak discontinued line are further obtained. All of our results not only satisfy the continuity of displacements and that of tractions on the interface, but also they are free of oscillatory singularity and interpenetration of crack faces.This investigation is supported by the National Natural Science Foundation of China     

Some possible alternative solutions of near-tip fields for steady crack growth in elastic perfectly-plastic media

Some possible alternative solutions of near-tip fields are studied for plane-strain Mode—I quasi-static steady crack growth in incompressible (ν=1/2) elastic perfectly-plastic media. A group of four-sector solutions and a three-sector solution in which the elastic-unloading region vanishes are given. Stress functions, plastic flow factors and plastic strains in each region are also given. Project supported by the State Education Commission under a funding program for Excellent University Young Faculties and National Natural Science Foundation of China.     

弹塑性双材料界面裂纹的渐近分析

本文通过精确的数学分析,对于遵循塑性形变理论的幂硬化材料界面裂纹,求得了裂纹面面力自由和裂纹面无摩擦接触两种情况下的分离变量形式的全连续HRR 型奇性渐近解,这种全连续的奇性渐近解只对特殊的混合参数M'才存在.对任意指定的混合参数M',我们进一步求得了含弱间断的分离变量形式的HRR 型奇性渐近解(?)我们得到的所有解均保证了界面处的面力连续条件和位移连续条件,且不出现弹性双材料界面裂纹问题中所常见的应力振荡奇性和裂纹面相互嵌入的不合理现象.     

Near-tip fields for a crack growing along an elastic perfectly plastic interface

The stress and deformation fields near the tip of an anti-plane crack growing quasi-statically along an interface of elastic perfectly plastic materials are given in this paper. A family of solutions for the growing crack fields is found covering all admissible crack line shear stress ratios. The project supported by the National Natural Science Foundation of China     

A semi-infinite interfacial crack between two bonded dissimilar elastic strips

Summary  This paper is concerned with a semi-infinite interfacial crack between two bonded dissimilar elastic strips with equal thickness. Solutions for the complex stress intensity factor (SIF) and energy release rate (ERR) are obtained in closed form under in-plane deformations. During the procedure, the mixed boundary-value problem is reduced by means of the conformal mapping technique to the standard Riemann–Hilbert problem. In some limiting cases, the present solutions can cover the results found in literature. Received 21 February 2002; accepted for publication 2 July 2002 X.-F Wu's work was supported in part by the Milton E. Mohr Research Fellowship (2001, 2002) of the Engineering College at University of Nebraska-Lincoln.     

Singular fields of a mode III interface crack in a power-law hardening bimaterial

A high order of asymptotic solution of the singular fields near the tip of a mode III interface crack for pure power-law hardening bimaterials is obtained by using the hodograph transformation. It is found that the zero order of the asymptotic solution corresponds to the assumption of a rigid substrate at the interface, and the first order of it is deduced in order to satisfy completely two continuity conditions of the stress and displacement across the interface in the asymptotic sense. The singularities of stress and strain of the zeroth order asymptotic solutions are −1/(n ₁+1) and −n/(n ₁+1) respectively. (n=n ₁,n ₂ is the hardening exponent of the bimaterials.) The applicability conditions of the asymptotic solutions are determined for both zeroth and first orders. It is proved that the Guo-Keer solution^[10] is limited in some conditions. The angular functions of the singular fields for this interface crack problem are first expressed by closed form. The project supported by National Natural Science Foundation of China     

On the direction of development of a thin fracture process zone at the tip of an interfacial crack between dissimilar media

The Wiener-Hopf method is used to study, under the conditions of plane strain, the direction of development of a thin fracture process zone at the tip of an interfacial crack in a piecewise homogeneous isotropic elastoplastic body. The zone is modeled by a straight line of tangential displacement discontinuity that emerges from the crack tip at an angle to the interface. The dependences of the zone length and the angle on the load and other parameters of the problem are investigated __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 2, pp. 14–23, February 2006.     

Closed-form solution for a mode-III interfacial edge crack between two bonded dissimilar elastic strips

A closed-form solution is obtained for the problem of a mode-III interfacial edge crack between two bonded semi-infinite dissimilar elastic strips. A general out-of-plane displacement potential for the crack interacting with a screw dislocation or a line force is constructed using conformal mapping technique and existing dislocation solutions. Based on this displacement potential, the stress intensity factor (SIF, K_III) and the energy release rate (ERR, G_III) for the interfacial edge crack are obtained explicitly. It is shown that, in the limiting special cases, the obtained results coincide with the results available in the literature. The present solution can be used as the Green’s function to analyze interfacial edge cracks subjected to arbitrary anti-plane loadings. As an example, a formula is derived correcting the beam theory used in evaluation of SIF (K_III) and ERR (G_III) of bimaterials in the double cantilever beam (DCB) test configuration.     

Electrically permeable crack with contact zones between two piezoelectric materials

The paper addresses a plane problem for an infinite plane consisting of two different piezoceramic half-planes with an interfacial crack with smooth contact zones and subjected to the uniformly distributed electromechanical loading applied at infinity. Methods of complex-variable theory are used to reduce the problem to a Dirichlet-Riemann mixed homogeneous boundary-value problem. Its solution is found in closed form. A system with one crack that has one or two contact zones is calculated. Expressions for stresses, electric-flux density, and displacement discontinuities at the interface are written. Equations for the determination of the length of the contact zones and expressions for the stress intensity factors at the crack tips are derived __________ Translated from Prikladnaya Mekhanika, Vol. 44, No. 3, pp. 66–74, March 2008.     

Mode-III interface edge crack between two bonded quarter-planes of dissimilar piezoelectric materials

Summary  The problem of an interface edge crack between two bonded quarter-planes of dissimilar piezoelectric materials is considered under the conditions of anti-plane shear and in-plane electric loading. The crack surfaces are assumed to be impermeable to the electric field. An integral transform technique is employed to reduce the problem under consideration to dual integral equations. By solving the resulting dual integral equations, the intensity factors of the stress and the electric displacement and the energy release rate as well as the crack sliding displacement and the electric voltage across the crack surfaces are obtained in explicit form for the case of concentrated forces and free charges at the crack surfaces and at the boundary. The derived results can be taken as fundamental solutions which can be superposed to model more realistic problems. Received 10 November 2000; accepted for publication 28 March 2001     

Dynamic fracture analysis of an annular interfacial crack between dissimilar magnetoelectroelastic layers

Transient response of an annular interfacial crack between dissimilar magnetoelectroelastic layers under impacts is investigated. On the crack surface, magnetoelectrically impermeable boundary condition is adopted. Using Laplace and Hankel transform techniques, the mixed boundary value problem is reduced to a system of singular integral equations. The integral equations are further reduced to a system of algebraic equations with the aid of Jacobi polynomials. The dynamic field intensity factor and dynamic energy release rate are determined. Numerical results reveal the effects of electric or magnetic loadings and material parameters of composite on crack propagation and growth.     

Investigation of the behavior of a griffith crack at the interface between two dissimilar orthotropic elastic half-planes for the opening crack mode

The behaviors of an interface crack between dissimilar orthotropic elastic halfplanes subjected to uniform tension was reworked by use of the Schmidt method. By use of the Fourier transform, the problem can be solved with the help of two pairs of dual integral equations, of which the unknown variables are the jumps of the displacements across the crack surfaces. Numerical examples are provided for the stress intensity factors of the cracks. Contrary to the previous solution of the interface crack, it is found that the stress singularity of the present interface crack solution is of the same nature as that for the ordinary crack in homogeneous materials. When the materials from the two half planes are the same, an exact solution can be otained.     

Electro-mechanical analysis of an interfacial crack between a piezoelectric and two orthotropic layers

Summary  The problem of an interfacially cracked three-layered structure constructed of a piezoelectric and two orthotropic materials is analyzed using the theory of linear piezoelectricity and fracture mechanics. Anti-plane shear loading is considered, and the integral transform technique is used to determine the stress intensity factor. Numerical examples show the electro-mechanical effects of various material combinations and layer thicknesses on the stress intensity factor. Interesting results are obtained in comparison with earlier solutions for interfacially cracked piezoelectric structures. Received 29 December 2000; accepted for publication 3 May 2001     

螺型位错偶极子与界面钝裂纹的干涉效应

研究了螺型位错偶极子与界面钝裂纹的干涉效应.应用保角变换技术,得到了复势函数与应力场的封闭解析解,讨论了位错偶极子方位、臂长及裂纹钝化程度对位错偶板子屏蔽效应和发射条件的影响.结果表明,与单个螺型位错不同,螺型位错偶极子与x轴夹角在一定范围内时才可以降低界面钝裂纹尖端的应力强度因子(屏蔽效应),屏蔽效应随偶板子臂长的增大而增强,随裂纹钝化程度的增大而增强,屏蔽区域也随裂纹钝化程度的增大而增大;位错偶极子发射所需的临界无穷远加载随偶极子臂长的增加而减小,随位错方位角及裂纹钝化程度的增加而增大;最可能的位错偶极子发射角度为0.螺型位错偶极子的发射比单个螺型位错的发射要困难.本文解答的特殊情况与相关文献给出的解答一致.     

Finite element analysis of mode III steady crack growth in anisotropic hardening materials

In this paper, the steady crack growth of mode III under small scale yielding conditions is investigated for anisotropic hardening materials by the finite element method. The elastic-plastic stiffness matrix for anisotropic materials is given. The results show the significant influences of anisotropic hardening behaviour on the shape and size of plastic zone and deformation field near the crack tip. With a COD fracture criterion, the ratio of stress intensity factorsk _ss/k_c varies appreciably with the anisotropic hardening parameterM and the hardening exponentN.     

ASYMPTOTIC ANALYSIS OF MODE Ⅱ STATIONARY GROWTHCRACK ON ELASTIC-ELASTIC POWER LAWCREEPING BIMATERIAL INTERFACE

A mechanical model was established for mode Ⅱ interfacial crack static growingalong an elastic-elastic power law creeping bimaterial interface. For two kinds of boundaryconditions on crack faces, traction free and frictional contact, asymptotic solutions of thestress and strain near tip-crack were given. Results derived indicate that the stress andstrain have the same singularity, there is not the oscillatory singularity in the field; thecreep power-hardening index n and the ratio of Young‘s module notably influence the crack-tip field in region of elastic power law creeping material and n only influences distribution ofstresses and strains in region of elastic material. When n is bigger, the creepingdeformation is dominant and stress fields become steady, which does not change with n.Poisson‘s ratio does not affect the distributing of the crack-tip field.     

Crack growth of an interface crack between two dissimilar magneto-electro-elastic materials under anti-plane mechanical and in-plane electric magnetic impact

This paper examines the dynamic response of an interface crack between two dissimilar magneto-electro-elastic materials subjected to the mechanical and electric magnetic impacts. The magneto-electric impermeable boundary conditions are adopted. Laplace and Fourier transforms and dislocation density functions are employed to reduce the mixed boundary value problem to Cauchy singular integral equations in Laplace transform domain, which are solved numerically. Lots of numerical results are given graphically in time domain. The effects of electric impact loading and magnetic impact loading on dynamic energy density factors are discussed. Crack growth and propagation is predicted. The study of this problem is expected to have applications to the investigation of dynamic fracture properties of magneto-electro-elastic materials with cracks.     

Scattering of harmonic antiplane shear waves by an arc-shaped interfacial crack in functionally graded annular bi-material guide rail

Abstract

The dynamic behavior of an arc-shaped interfacial crack in an orthotropic functionally graded annular bi-material structure is investigated. In order for the analysis to be executable, the material properties are assumed to vary with the power function of the radial coordinates. By applying the separation variable method, the boundary value problem of the partial differential equation describing the fracture problem of this article can be transformed into a Cauchy kernel singular integral equation with the unknown jump of displacements across the crack surfaces. The obtained integral equation is solved numerically by Lobatto–Chebyshev collocation method to show the effects of the geometric and physical parameters upon the dynamic stress field near the crack tips.

Communicated by Kuang-Hua Chang.     

Initial kinking of an interface crack between two elastic media

The initial kinking of a thin fracture process zone near the crack tip under plane strain is studied using the Wiener-Hopf method. The crack is located at the interface between dissimilar elastic media. The fracture process zone is modeled by a straight line of normal displacement discontinuity emerging from the crack tip at an angle to the interface. The angle between the process zone and the interface is determined from the condition of strain energy maximum in the process zone. The dependences of the length and angle of the process zone on the external load and other parameters of the problem are studied. The results are compared with theoretical and experimental data obtained by other researchers __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 10, pp. 28–41, October 2007.