Investigation on the basic hydrolysis of crystal violet in mixed reverse micelles formed with AOT and nonionic surfactants

 The kinetics and thermodynamics of the basic hydrolysis of crystal violet (CV) in mixed reverse micelles formed with anionic surfactant AOT and nonionic surfactants have been investigated. It was found that the mixed reverse micelles had inhibitory effects on CV hydrolysis compared with the normal aqueous solution, and the equilibrium constant K of the reaction in mixed reverse micellar systems is smaller than that in pure water. The influence of water content and surfactant composition in reverse micelles on the second-order rate constant k ₁ of the positive reaction, on the first-order rate constant k _-1 of the reverse reaction, as well as on the equilibrium constant K of the reaction has been studied, and the results obtained were interpreted in terms of the nature of surfactants and the properties of microenvironment where the reaction took place. Received: 24 October 1997 Accepted: 18 March 1998     

Interfacial and micellar properties of anionic azo dye-surfactant binary systems

The association of an anionic dye C.I. Reactive Orange 16 (RO16) and different types of surfactants, i.e., anionic surfactant sodium dodecylsulfate, nonionic surfactants poly(oxyethylene) ethers (C _m POE₁₀, m = 12, 16, and 18; C₁₂POE _n , n = 4, 10, and 23), was investigated using tensiometry in a certain micellar concentration range. RO16 was shown to aggregate in water when its concentration is above the threshold value. The surface tension lowering and critical micellar concentration (CMC) values were interpreted on the same grounds as those for surfactants mixtures. The tensiometric measurements of dye-surfactant systems are carried out as a function of the molar concentration of solution at 25°C. Using Rubingh’s regular solution theory, the values of interaction parameters were found to be negative for all studied binary mixtures. These negative values indicate that there is an attractive interaction of the surfactants in mixed micelles and reflect synergistic behavior of a mixture. In all studied systems, deviations from ideal behavior were observed depending on the type of surfactant. Interaction parameters calculated using regular solution theory are changed from −2.62 to −12.43. The smallest deviation from ideal behavior is obtained for the RO16-C₁₂POE₄ mixed system; i.e., in the case when nonionic surfactant has the shortest alkyl chain and the smallest number of ethylene oxide units. The text was submitted by the authors in English.     

Investigations on mixed micelles of binary mixtures of zwitterionic surfactants and triblock polymers: a cyclic voltammetric study

Cyclic voltammetry has been employed to investigate the mixed micellar behavior of the binary mixtures of different zwitterionic surfactants such as 3-(N,N-dimethylhexadecylammonio)propane sulfonate (HPS), 3-(N,N-dimethyltetradecylammonio)propane sulfonate (TPS) and 3-(N,N-dimethyldodecylammonio)propane sulfonate (DPS) with three triblock polymers (L64, F127 and P65) by using 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) as an electroactive probe at 25 °C. Critical micellar concentration (cmc) has been determined from the plots of variation in peak current (i_p) versus the total concentration of surfactant/triblock polymer. Diffusion coefficient of the electroactive species has also been reported. The regular solution theory approximation has been used to determine various micellar parameters of ideal systems. The variation in micellar mole fraction (X₁) of the zwitterionic surfactant supports the formation of mixed micelles, which are rich in triblock polymer component in the surfactant rich region of the mixture and vice versa. The regular solution interaction parameter (β) suggests the formation of mixed micelles due to the synergistic interactions in case of HPS/TPS/DPS + F127/P65 systems and gets affected by EO/PO ratio of triblock polymers.     

SOLUBILIZATION IN MIXED REVERSE MICELLAR SYSTEMS OF AOT/NONIONIC SURFACTANTS/n-HEPTANE

Solubilization of water and aqueous NaCl solutions in mixed reverse micellar systems of anionic surfactant AOT and nonionic surfactants in n-heptane was studied. It was found that the maximum solubilization capacity of water was higher in the presence of certain concentrations of NaCl electrolyte, and these concentrations increased with the increase of nonionic surfactant content and their EO chain length. Soluibilization capacity was enhanced by mixing AOT with nonionic surfactants. The observed phenomena were interpreted in terms of the stability of the interfacial film of reverse micellar microdroplet and the packing parameter of the surfactant that formed mixed reverse micelles.     

混合反胶束的电导与微结构研究

反胶束是两亲分子在非极性溶剂中形成的一种有序组合体，在医药、化工、采油、胶束催化及酶催化等领域中有重要应用．与胶束溶液相比，人们对反胶束的形成与结构的了解至今仍不充分．特别是对于由混合表面活性剂形成的反胶束的研究几乎无人涉及．本文采用动态光散射、电导及荧光光谱等手段对阴离子表面活性剂AOT与非离子表面活性剂形成的混合反胶束进行了研究，旨在探讨利用表面活性剂的复配来调节和控制反胶束的结构和性能．亚实验部分二异辛基磺化琉璃酸钠（AOT，Sigma公司）；Brij30为含4个氧乙烯基（EO基）的十二碳醇（AcrosOrgani…     

Photophysical studies of Merocyanine 540 dye in aqueous micellar dispersions of different surfactants and in different solvents

The fluorescence spectra of Merocyanine 540 (MC 540), an anionic dye have been studied in aqueous solution of different nonionic surfactants. The results show the enhancement and red shift of fluorescence bands, indicating electron transfer from the surfactants to the excited dye. This is also supported by the photovoltage generation by the dye-surfactant systems in a photoelectrochemical cell. Possible mechanisms of the excited state interaction and photovoltage generation have been suggested. From the thermodynamic, spectrophotometric and photogalvanic results, it can be concluded that the electron donating abilities of the nonionic surfactants towards MC 540 are in the order: Tween 80 approximately Tween 60>Tween 40>Tween 20>Triton X-100. The spectral studies (both absorption and fluorescence) of Merocyanine 540 have been carried out in solvents of varying polarities as well as in an aqueous micellar dispersions of nonionic surfactants. The Stokes shifts of the fluorescence from the absorption have been found to increase with increasing polarity of the solvents. An attempt has been made to ascertain the polarity of the microenvironment of Merocyanine 540 in the nonionic surfactant media from the photophysical characteristics of the dye in different solvents of known polarities.     

Study of micellar and phase separation behavior of mixed systems of triblock polymers

Cyclic voltammetric (CV) techniques have been employed to study the mixed micellar behavior of binary mixtures of triblock polymers (TBP) such as F127+P85, F127+P85, F88+P85, and F88+P123 using 2,2,6,6-tetramethyl-1-piperidinyloxy (Tempo) as an electroactive probe. Critical micellar concentration (cmc) has been obtained for pure triblock polymers and their mixed systems from the plots of peak current (i_p) variation versus the total concentration. Diffusion coefficients of the electroactive species have been determined from the Randles–Sevcik equation. The interaction parameter (β) for the mixed micelles was obtained from the regular solution theory. The values of β suggest that the synergism does exist especially with the F88+P123 system. Cloud point measurements have also been made on the binary mixtures of triblock polymers following similar mixing criteria. An effort has been made to correlate the micellar behavior and phase separation (cloud point) phenomenon. From the correlation, it can be concluded that in the systems studied, an increase in cmc increases the cloud point of mixed systems of triblock polymers.     

Mixed micelle behavior of Pluronic L64 and Triton X-100 with conventional and dimeric cationic surfactants

The mixed micellar properties of a triblock copolymer, Pluronic L64, (EO)13(PO)30(EO)13, and a nonionic surfactant, Triton X-100, in aqueous solution with conventional alkyl ammonium bromides and their dimeric homologues were investigated with the help of fluorescence and cloud point measurements. The composition of mixed micelles and the interaction parameter, beta, evaluated from the critical micelle concentration (cmc) data for different mixtures using Rubingh's and Motomura's theories are discussed. It has been observed that the mixed micelle formation between monomeric/dimeric alkyl ammonium bromides and L64 was due to synergistic interactions which increase with the increase in hydrophobicity of the cationic component. On the other hand, synergistic mixing was observed in the mixed micelles of Triton X-100 and monomeric cationic surfactants, the magnitude of which decreases slightly with the increase in hydrophobicity of the cationic component. Antagonistic interactions were observed in the case of Triton X-100 and dimeric cationic surfactants.     

Effect of self‐assemblies of various surfactants in their single and mixed states on the BZ oscillatory reaction

Micelles of different surfactants are well known to affect chemical equilibria and reactivities by selectively sequestering the reagent substrates through electrostatic and hydrophobic interactions. In this article, the effects of micelles of various surfactants on different parameters of the Ce(IV)‐catalyzed Belousov–Zhabotinsky (BZ) oscillatory reaction at 35°C in nonstirred closed conditions are studied by employing spectrophotometry and tensiometry. Surfactants used in this study are the cationics hexadecyltrimethylammonium bromide (CTAB) and pentamethylene‐1,5‐bis(N‐hexadecyl‐N,N‐dimethylammonium)bromide gemini (Gemini), anionic sodium dodecylbenzene sulfonate (SDBS), and nonionic Brij58, whereas the binary surfactant systems used are cationic–nonionic CTAB+Brij58 and anionic–nonionic SDBS+Brij58. The results revealed that the induction period shows a definite variation with increasing concentration of different surfactants above their critical micelle concentration (cmc). The amplitudes of oscillation and absorbance maxima and minima are enhanced in the presence of micelles of CTAB and Gemini surfactants, whereas micelles of SDBS and Brij58 have almost no effect on the nature of the oscillations. However, mixed micelles of CTAB+Brij58 and SDBS+Brij58 binary mixtures show a quite different effect on the overall behavior of the oscillations. The enhanced effect of CTAB and Gemini surfactants on the overall nature of oscillations has been attributed to the positive charge on the surface of their micelles and to some extent on the presence of nitrogen in their head group. The effect of mixed binary micelles may be attributed to their synergistic nature. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 659–668, 2010     

Intermicellar material exchange in reverse micelles formed by ionic AOT and nonionic Igepal surfactants studied by means of pulse radiolysis. Influence of the temperature

The recombination of thiocyanate anion radicals, (SCN) ₂ ⁻ , formed pulse radiolytically within the water pools of reverse micelles stabilized with anionic AOT and nonionic Igepal surfactants, was proved as an indicator reaction to study intermicellar exchange. It was found that the exchange process is slower inIgepal than in AOT reverse micelles with the same water to surfactant ratio. The apparent activation enthalpy and entropy of the exchange process were determined in different alkanes. For the AOT and Igepal reverse micelles the activation parameters increase with the droplet size, but for the AOT systems they do not significantly change with the increase of droplet concentration. For non-percolated systems the activation parameters for Igepal reverse micelles approach those for AOT reverse micelles. This result supports existing suggestions that the mechanism of intermicellar exchange does not differ in principle between reverse micelles stabilized with ionic and nonionic surfactants.     

Studies of Monolayer and Mixed Micelle Formation of Anionic and Nonionic Surfactants in the Presence of Adenosine-5-monophosphate

The interactions between the anionic surfactant di-(2-ethylhexyl) phosphate sodium salt (DEP) and two nonionic surfactants, dimethyldecyl phosphineoxide (DDPO) and dimethyltetradecyl phosphineoxide (DTPO), at the interface and in the micellar phases were investigated in the absence and presence of adenosine-5-monophosphoric acid disodium salt (AMP). The mixed systems were DEP–DDPO, DEP–DDPO/AMP (0.001 mol⋅L⁻¹), DEP–DTPO, and DEP–DTPO/AMP (0.001 mol⋅L⁻¹) at different bulk mole fractions of the anionic component (α ₁=0.9,0.8,0.6,0.4,0.2). The mixed systems studied were investigated based on the theoretical models of Rubingh and Clint. The results showed surface tension reduction efficiency. The adsorbed mixed monolayer demonstrated stronger interactions than the mixed micelles, whereas AMP increased the interfacial interactions more than those in the micellar phase. The Gibbs energy of mixing suggests that the stability of the mixed micellar phase is greater than that of the micellar phases of the individual components. The synergism that occurred in the different mixed phases is discussed.     

Spectrophotometric studies of anionic dye-cationic surfactant interactions in mixture of cationic and nonionic surfactants

The interaction between an anionic dye C.I. Reactive Orange 16 (RO16) and a cationic surfactant dodecylpyridinium chloride (DPC) in mixtures of DPC and nonionic surfactants poly(oxyethylene)ethers (C(m)POE(n); m = 12, 16 and 18, n = 4, 10 and 23) are investigated spectrophotometrically in a certain micellar concentration range. The spectrophotometric measurements of dye-surfactant systems are carried out as function of mole fraction of surfactant at four different temperatures. For this reason, a typical system was occurred at 1.0 x 10(-2) mol l(-1) for surfactants and at 1.0 x 10(-4) mol l(-1) for dye concentrations. The formation of DPC-RO16 complex in the C(m)POE(n) solutions of different mole fractions in its micellar concentration range have been determined and compared to those obtained in the binary mixtures. From the spectrophotometric measurements has been observed that the addition of nonionic surfactant in to the mixture of DPC-RO16, causes a significant increase of the value of absorbance. This increase explains that the stability of DPC-RO16 complex is reduced in the presence of nonionic surfactant micelles. It can be seen from results; in mixed surfactant solutions, there are DPC-C(m)POE(n) and RO16-C(m)POE(n) interactions in addition to DPC-RO16 interaction. Since the solubilizaton of the DPC-RO16 complex has been appeared in the C(m)POE(n) solution, our results support the conclusion that adding C(m)POE(n) influences the hydrophobic-hydrophilic balance of the studied complex. Furthermore effect of the alkyl chain length and the number of poly(oxyethylene) in nonionic surfactant on values of absorbance have been investigated.     

Micellization and synergistic interaction of binary surfactant mixtures based on sodium nonylphenol polyoxyethylene ether sulfate

Mixed micelle formation and synergistic interactions of binary surfactant combinations of sodium nonylphenol polyoxyethylene ether sulfate (NPES) with typical surfactants such as sodium dodecyl sulfate (SDS), Triton X-100 (TX100), cetyl trimethyl ammonium bromide (CTAB), and sodium bis(2-ethylhexyl) sulfosuccinate (AOT) at 25 degrees C in the presence of NaCl have been investigated. The critical micelle concentration of the binary mixtures has been quantitatively estimated by steady-state fluorescence measurements. The micellar characteristics such as composition, activity coefficients, and mutual interaction parameters have been estimated following different theoretical treatments. Investigation on the micellization and synergistic interaction of NPES with four kinds of surfactants showed that the behavior of the binary mixture deviated from the ideal state. The analysis revealed that the interaction parameter values (beta) varied with variation of solvent composition. Besides the strong electrostatic attraction between the oppositely charged surfactant NPES-CTAB mixture, the interaction between NPES and SDS also showed far more deviation from ideal behavior than that of TX100 and AOT. The reason for the synergism is also discussed and the results show that an ionic and a nonionic surfactant character existed concurrently in NPES due to the combination of a sulfate group and polyoxyethylene as a hydrophilic moiety. Zeta potential and diffusion coefficient measurements of micelles confirmed the synergistic interaction between the binary surfactants.     

Fluorocarbon polymerizable surfactants: viscometric behavior, micellar polymerization and interactions with associating polymers

 The micellar aggregation of two fluorocarbon surfactants bearing a polymerizable acrylamido group and differing only in the degree of amido substitution (CONH or CONC₂H₅) has been investigated by viscometry. The two surfactants exhibit distinct solution properties with a micellar growth occurring at a much lower concentration for the N-monosubstituted sample which shows in addition a shear thickening and rheopectic behavior. The ability of the latter surfactant to form hydrogen bonding is responsible for this difference in behavior. Micellar copolymerization of acrylamide with these surfactants or with a hydrocarbon analogue gives copolymers with a polysoap-like behavior. The copolymers in aqueous solution show a pronounced intramolecular hydrophobic aggregation expressed by relatively low-viscosity values when compared with those of other hydrophobically modified water-soluble polymers reported in the literature. Surfactant–polymer mixed systems do not show a strong incompatibility between fluorocarbon and hydrocarbon moieties. Received: 24 March 1998 Accepted: 30 June 1998     

Micellar-enhanced ultrafiltration of cadmium ions with anionic–nonionic surfactants

Micellar-enhanced ultrafiltration (MEUF), a surfactant-based separation process, is promising in removing multivalent metal ions from aqueous solutions. The micellar-enhanced ultrafiltration of cadmium from aqueous solution was studied in systems of anionic surfactant and mixed anionic/nonionic surfactants. The micelle sizes and zeta potentials were investigated by dynamic light scattering measurements. The effects of feed surfactant concentration, cadmium concentration and the molar ratio of nonionic surfactants to sodium dodecyl sulfate (SDS) on the cadmium removal efficiency, the rejection of SDS and nonionic surfactants and the permeate flux were investigated. The rejection efficiencies of cadmium in the MEUF operation were enhanced with higher SDS concentration and moderate Cd concentration. When SDS concentration was fixed at 3 mM, the optimal ranges of the molar ratios of nonionic surfactants to SDS for the removal of cadmium were 0.4–0.7 for Brij 35 and 0.5–0.7 for Triton X-100, respectively. With the addition of nonionic surfactants, the SDS dosage and the SDS concentration in the permeate were reduced efficiently.     

A self-diffusion study in aqueous solution and lyotropic mesophases of amphiphilic block copolymers

 Water-soluble poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (PEO–PPO–PPO) triblock copolymers are high-molecular-weight nonionic copolymers and form micellar solutions and liquid-crystalline mesophases in water. We studied the temperature dependence of polymer and water self-diffusion in solutions and lyotropic mesophases of the PEO₁₃ PPO₃₀ PEO₁₃/water and PEO₂₁ PPO₄₇ PEO₂₁/water binary systems. The self-diffusion measurements were performed by means of the pulsed field gradient spin-echo NMR method. The analysis of the water mobility was realised using “the obstruction factor” and “the two-site model”, which consider the reduction of the water self-diffusion due to the microstructure of the lyotropic aggregates and to the presence of one part of the solvent bound to the polymer aggregate surfaces. We calculated the water obstruction factors and the hydration numbers as a function both of the polymer composition and of the temperature. The results are compared with the data obtained in mesophases formed by classical surfactants. Received: 16 September 1999 Accepted in revised form: 24 November 1999     

Micellar parameters of diblock copolymers and their interactions with ionic surfactants

The interactions of non-ionic amphiphilic diblock copolymer poly（oxyethylene/oxybutylene）(E₃₉B₁₈) with anionic surfactant sodium dodecyl sulphate（SDS） and cationic surfactant hexadecyltrimethylammonium bromide（CTAB） were studied by using various techniques such as surface tension,conductivity,steady-state fluorescence and dynamic light scattering.Surface tension measurements were used to determine the critical micelle concentration（CMC） and thereby the free energy of micellization(△G_mic),free energy of adsorption(△G_ads),surface excess concentration（Γ） and minimum area per molecule（A）.Conductivity measurements were used to determine the critical micelle concentration（CMC）,critical aggregation concentration（CAC）,polymer saturation point（PSP）,degree of ionization（α） and counter ion binding（β）. Dynamic light scattering experiments were performed to check the changes in physiochemical properties of the block copolymer micelles taken place due to the interactions of diblock copolymers with ionic surfactants.The ratio of the first and third vibronic peaks（I₁/I₃） indicated the polarity of the pyrene micro environment and was used for the detection of micelle as well as polymer-surfactant interactions.Aggregation number（N）,number of binding sites（n） and free energy of binding （△G_b） for pure surfactants as well as for polymer-surfactant mixed micellar systems were determined by the fluorescence quenching method.     

Thermochemical study of silver halide nanoparticles formation conditions in AOT inverted micelles

AgCl and AgBr nanoparticles formation conditions were studied by a thermochemical method in AOT (sodium bis(2-ethylhexyl)sulfosuccinate) inverted micellar systems, in AOT—dioctyl sulfide (DOS) mixed micelles, and (for comparison) in aqueous solutions. The heats of formation of AgCl and AgBr nanoparticles in AOT micelles in exchange reactions with potassium halides are, respectively, −55.5 × (1 ± 0.07) and −68.6 × (1 ± 0.07) kJ/mol, that is, smaller in magnitude than the values obtained for aqueous solutions (−68 × (1 ± 0.07) and −88 × (1 ± 0.07) kJ/mol). This difference arises from the existence of particle interactions causing the formation of coagulation contacts between halide particles followed by precipitation in an aqueous phase and the absence of such interactions in a micellar medium. DOS interacts with AOT (to form mixed micelles) and with silver ions (in long-term contact), thus reducing the heats of reactions.     

Electrophoretic separations in poly(dimethylsiloxane) microchips using mixtures of ionic,nonionic and zwitterionic surfactants

The use of surfactant mixtures to affect both EOF and separation selectivity in electrophoresis with PDMS substrates is reported, and capacitively coupled contactless conductivity detection is introduced for EOF measurement on PDMS microchips. First, the EOF was measured for two nonionic surfactants (Tween 20 and Triton X‐100), mixed ionic/nonionic surfactant systems (SDS/Tween 20 and SDS/Triton X‐100), and finally for the first time, mixed zwitterionic/nonionic surfactant systems (TDAPS/Tween 20 and TDAPS/Triton X‐100). EOF for the nonionic surfactants decreased with increasing surfactant concentration. The addition of SDS or TDAPS to a nonionic surfactant increased EOF. After establishing the EOF behavior, the separation of model catecholamines was explored to show the impact on separations. Similar analyte resolution with greater peak heights was achieved with mixed surfactant systems containing Tween 20 and TDAPS relative to the single surfactant system. Finally, the detection of catecholamine release from PC12 cells by stimulation with 80 mM K⁺ was performed to demonstrate the usefulness of mixed surfactant systems to provide resolution of biological compounds in complex samples.     

Interaction of amphiphilic block copolymer micelles with surfactants

An out line and summary of literature studies on interactions between different types of amphiphilic copolymer micelles with surfactants has been given. This field of research is still emerging and it is difficult presently to make generalisations on the effects of surfactants on the copolymer association. The effects are found to be varied depending upon the nature and type of hydrophobic (hp) core and molecular architecture of the copolymers and the hydrocarbon chain length and head group of surfactants. The information available on limited studies shows that both anionic and cationic surfactants (in micellar or molecular form) equally interact strongly with the associated and unassociated forms of copolymers. The beginning of the interaction is typically displayed as critical aggregation concentration (CAC), which lies always below the critical micelle concentration of the respective surfactant. The surfactants first bind to the hydrophobic core of the copolymer micelles followed by their interaction with the hydrophilic (hl) corona parts. The extent of binding highly depends upon the nature, hydropobicity of the copolymer molecules, length of the hydrocarbon tail and nature of the head group of the surfactant. The micellization of poly(ethylene oxide) (PEO)–poly(propylene oxide) (PPO)–poly(ethylene oxide) was found to be suppressed by the added surfactants and at higher surfactant concentrations, the block copolymer micelles get completely demicellized. This effect was manifested itself in the melting of liquid crystalline phases in the high copolymer concentrations. However, no such destabilization was found for the micelles of polystyrene (PS)–poly(ethylene oxide) copolymers in water. On the contrary, the presence of micellar bound surfactant associates resulted in to large super micellar aggregates through induced intra micellar interactions. But with the change in the hydrophobic part from polystyrene to poly(butadiene) (PB) in the copolymer, the added surfactants not only reduced the micellar size but also transformed cylindrical micelles to spherical ones. The mixtures in general exhibited synergistic effects. So varied association responses were noted in the mixed solutions of surfactants and copolymers.