Metal chelate exchange in the organic phase-II Extraction and exchange constants of dithizonates and diethyldithiocarbamates

Dithizonates and diethyldithiocarbamates of Ag, Tl(I), Cu(II), Zn, Cd, Hg(II), Pb, Fe(II), Co(II), Ni, Pd(II), In(III), As(III), Sb(III), Bi, Se(IV) and Te(IV) have been prepared and their reactions in carbon tetrachloride have been studied spectrophotometrically. From the exchange constants determined, the extraction constants of metal diethyldithiocarbamates have been calculated. Where formation of mixed chelates has been observed, corresponding exchange constants have been determined. Finally, the influence of organic solvents (CCl(4), CHCl(3), C(6)H(6) and C(6)H(5)Cl) on the exchange reaction of zinc diethyldithiocarbamate with dithizone has been investigated.     

Solvent Extraction Studies of Metal-4-(2-pyridyl-azo)-Resorcinol Complexes with Potassium-Dicyclohexyl-18-crown-6 Complex

Abstract

The solvent extraction studies of Pd(II), V(V), Co(III), Cu(II), Ni(II) and Fe(II)-PAR [4 - (2-pyridyl azo)-resorcinol] complexes with dicyclohexyl-18-crown-6 have been investigated in 1,2-dichloroethane as a solvent. It was observed that the complexes of Pd(II), V(V), Co(III), Cu(II), Ni(II) and Fe(II)-PAR were extracted into organic phase. In order to investigate the effect of enthalpy and entropy in the extraction of metal-PAR complexes, an attempt has been made to explore the temperature effect. In the extraction studies, it was observed that the entropy effect is one of the major factors for the selective extraction. The shape of the complexes may be one of the causes for the extractability of metal-PAR complexes with potassium dicyclohexyl-18-crown-6. The planar palladium-PAR-SCN^? complex was easily extracted into organic phase in comparison with other complexes.     

Liquid–liquid extraction of scandium with nalidixic acid in dichloromethane

The extraction behavior of nalidixic acid (HNA) in CH₂Cl₂ has been studied for various di- and trivalent metal ions such as Cu(II), Fe(II), Ni(II), Mn(II), Sb(II), Co(II), Sc(III), Y(III), Nd(III) and Eu(III) from aqueous buffer solutions of pH 1–7 with 0.1 mol dm⁻³ nalidixic acid in dichloromethane. Separation factors of Sc(III) from these metals has shown that its clean separation is possible at pH 3.4–4. The parameters affecting the extraction of Sc(III) were optimized. The composition of the extracted adduct was determined by slope analysis method that came out to be Sc(NA)₃. Extraction of Sc(III) was studied in the presence of various cations and anions. Among the anions studied only fluoride, citrate and oxalate have significant interference whereas, Fe(III) has reduced the extraction to 53% that can be removed by using ascorbic acid as reducing agent. The proposed extraction system proved good stability up to six extraction-stripping stages for the extraction of Sc(III).     

Extraction equilibria of some transition metal ions by bis(2-ethylhexyl)phosphinic acid

Measurements of dimerization constants (K(d,HR)) and distribution constants (K(D,HR)) of bis(2-ethylhexyl)phosphinic acid (PIA-8) in three kinds of organic diluents were carried out by a potentiometric two-phase titration technique at 298 +/- 0.1 K. Extraction of iron(III), zinc(II), copper(II), manganese(II), cadmium(II), cobalt(II) and nickel(II) by PIA-8 from 1.0 mol dm(-3) ammonium sulfate solution into heptane was investigated as a function of pH and extractant concentration. The data have been analyzed both graphically and numerically to determine the stoichiometry of extracted species and their extraction constants. The extracted metal species were found to be FeR(3) . 2HR for iron(III), ZnR(2) and ZnR(2) . 3HR for zinc(II), CuR(2) . HR and CuR(2) . 5HR for copper(II), MnR(2) . 2HR and MnR(2) . 3HR for manganese(II), CdR(2) . 3HR for cadmium(II), CoR(2) . HR and CoR(2) . 4HR for cobalt(II) and NiR(2) . 3HR and NiR(2) . 6HR for nickel(II), respectively.     

Electrophoretic studies on mixed complexes metal-hippuric acid-nitrilotriacetate

In the present communication the ionophoretic technique has been used for the study of Fe(III), Cu(II), Ni(II), and Co(II)-hippuric acid binary and Fe(III), Cu(II), Ni(II), and Co(II)-hippuric acid-NTA ternary complexes (NTA — nitrilotriacetic acid). The stability constants of metal-hippuric acid binary complexes are found to be 10^3.54, 10^2.95, 10^2.77, and 10^2.70 and the stability constants of metal-hippuric acid-NTA ternary complexes have been found to be 10^6.16, 10^6.06, 10^6.01, and 10^5.90 for Fe(III), Cu(II), Ni(II), and Co(II) complexes, respectively, at μ = 0.1 M (HClO₄) and 25°C.     

Liquid-liquid extraction and recovery of indium using Cyanex 923

The extraction of In(III) from HCl, H₂SO₄, and HNO₃ media using a 0.20 mol l⁻¹ Cyanex 923 solution in toluene is investigated. In(III) is quantitatively extracted over a fairly wide range of HCl molarity while from H₂SO₄ and HNO₃ media the extraction is quantitative at low acid concentration. The extracted metal ion has been recovered by stripping with 1.0 mol l⁻¹ H₂SO₄. The stoichiometry of the In(III): Cyanex 923 complex is observed to be 1:2. The extraction of In(III) is insignificantly changed in diluents namely toluene, n-hexane, kerosene (160-200 °C), cyclohexane, and xylene having more or less the same dielectric constants, whereas, it decreases with increasing polarity of diluents such as cyclohexanone and chloroform. The extractant is stable towards prolonged acid contact and there is a negligible loss in its extraction efficiency even after recycling for 20 times. The extraction behavior of some commonly associated metal ions namely V(IV), Ti(IV), Al(III), Cr(III), Fe(III), Ga(III), Sb(III), Tl(III), Mn(II), Fe(II), Cu(II), Zn(II), Cd(II), Pb(II), and Tl(I) has also been investigated. Based on the partition data the conditions have been identified for attaining some binary separations of In(III). These conditions are extended for the recovery of pure indium from zinc blend, zinc plating mud, and galena. The recovery of the metal ions is around 95% with purity approximately 99%.     

Extraction of Palladium(II) and Platinum(IV) from Hydrogen Chloride Solutions with 3,7-Dimethyl-5-thianonane-2,8-dione and Complexation of This Reagent with the Platinum Metals

Extraction of palladium(II) and platinum(IV) from acidic chloride solutions with solutions of 3,7-dimethyl-5-thianonane-2,8-dione in toluene and chloroform and complexation of this reagent with platinum metals in aqueous acetone were studied by ^1Hand ^13C NMR and IR spectroscopy. The possibility of extractive separation of palladium(II) from platinum(IV) and their separation from Cu(II), Ni(II), Co(II), Mn(II) and Fe(III) with solutions of 3,7-dimethyl-5-thianonane-2,8-dione in organic solvents was studied. The apparent concentration constants of extraction of palladium(II) and platinum(VI) with 3,7-dimethyl-5-thianonane-2,8-dione and the corresponding thermodynamic parameters were determined.     

Solvent extraction of copper(II), nickel(II), cobalt(II), zinc(II), and iron(Ill) by high molecular weight hydroxyoximes

The effects of pH have been examined on the extraction of the title ions by complexing with LIX-64N in kerosene. The extent of metal extraction as a function of pH is: Cu(II) < Fe(III) < Ni(II) < Zn(II) < Co(II). Stripping of all metal ions but cobalt with sulphuric acid from loaded kerosene complexing solutions is easily accomplished. Oxidation of Co(II) to Co(III) in the organic phase prevents stripping of this metal ion.     

Use of complexones for the extraction separation of rare earth and transplutonium elements with amines

The extraction distribution and separation of rare earth elements and americium from the concentrated lithium nitrate solution with solutions of tertiary amines in organic solvents has been studied as a function of the composition and structure of complexones of the polyaminepolyacetic acid series by a radioactive tracer method. It has been found that diethylenetriaminepentaacetic acid is suitable for the separation of REE from americium(III). The apparent stability constants for the lanthanide complexes with EDTA and DTPA in concentrated litium nitrate solutions have been obtained by extraction, pH-metric titration and solubility. Using these constants, the optimum conditions of separation have been found and the separation factors of REE calculated. The calculated and experimental values are in good agreement. The optimum conditions for the separation of americium(III) from REE in a wide range of lanthanide and complexone concentrations (10⁻¹–10⁻⁶ M) have been determined.     

<Emphasis Type="Italic">N,N</Emphasis>-dibutylhydrazide of octanoic acid as an extragent for the extraction of copper(II) from ammonium media

The solubility and the coefficient of copper(II) distribution between hexane and aqueous phase of N,N-dibutylhydrazide of octanoic acid were studied. The effects of ammonium, Co(II), Ni(II), and Zn(II) salts on the copper(II) extraction was studied. The extraction isotherm was constructed and the constant of copper extraction from ammonium solutions was calculated. The capacity of the organic phase with respect to copper and the conditions of its reextraction were determined.     

Solvent extraction of Er(III) and Lu(III) with 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester in presence of some reagents

The extraction of Er(III) and Lu(III) from thiocyanate media with 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (EHEHPA) and also with mixtures of EHEHPA and thenoltrifluoroacetone (HTTA) or tri-n-octylphosphine oxide (TOPO) or bis 2-ethylhexyl sulfoxide (B2EHSO) in benzene has been studied systematically. Synergistic effects have been observed with mixtures of EHEHPA+HTTA or TOPO. On the other hand, antagonistic effects have been observed with mixtures of EHEHPA+B2EHSO. These extraction data have been analyzed theoretically with the aid of a computer by taking into account complexation of the metal in the aqueous phase by SCN^– and plausible complexation in the organic phase. The extraction constants of the various product species have been deduced by non-linear regression analysis. The stability constants for the thiocyanate complexes of the metal ions have also been determined.     

Synthesis and characterization of 3-methyl-5-oxo-N,1-diphenyl-4,5-dihydro-1-H-pyrazole-4-carbothioamide and its metal complexes

The molecular parameters have been calculated to confirm the geometry of 3-methyl-5-oxo-N,1-diphenyl-4,5-dihydro-1-H-pyrazole-4-carbothioamide, HL. The compound is introduced as a new chelating agent for complexation with Cr(III), Fe(III), Co(II), Ni(II) and Cu(II) ions. The isolated chelates were characterized by partial elemental analyses, magnetic moments, spectra (IR, UV–vis, ESR; ¹H NMR) and thermal studies. The protonation constant of HL (5.04) and the stepwise stability constants of its Co(II), Cu(II), Cr(III) and Fe(III) complexes were calculated. The ligand coordinates as a monobasic bidentate through hydroxo and thiol groups in all complexes except Cr(III) which acts as a monobasic monodentate through the enolized carbonyl oxygen. Cr(III) and Fe(III) complexes measured normal magnetic moments; Cu(II) and Co(II) measured subnormal while Ni(II) complex is diamagnetic. The data confirm a high spin and low spin octahedral structures for the Fe(III) and Co(II) complexes. The ESR spectrum of the Cu(II) complex support the binuclear structure. The molecular parameters have also been calculated for the Cu(II) and Fe(III) complexes. The thermal decomposition stages of the complexes confirm the MS to be the residual part. Also, the thermodynamic and kinetic parameters were calculated for some decomposition steps.     

N,N-二烷基酰胺萃取硝酸的性能

酰胺萃取剂的羰基氧具有很强的碱性,易萃取酸.考虑到酰胺萃取酸后对其萃取金属离子的性能有影响,研究酰胺对硝酸的萃取是必要的.     

Rapid Solvent Extraction of Tin(IV) with High Molecular Weight Amine from Hydrochloric Acid Solution

A novel method has been developed for the solvent extraction of tin(IV) from 8 M hydrochloric acid with 4% N‐n‐octylaniline. Tin(IV) from the organic phase was determined spectrophotometrically with pyrocatechol violet at 550 nm. Extraction was found to be quantitative in the range of 7–10 M hydrochloric acid. When the concentration of N‐n‐octylaniline was varied from 0.05–20% in xylene, it showed that optimum concentration was > 3%. Amongst diluents like benzene and xylene, toluene was found to be an effective diluent. Effect of shaking time, concentration of metal ion, and salting out agents was studied. Tolerance limits of various diverse ions were determined by masking interfering cations. Tin(IV) was separated from associated elements in its binary mixture with Se(IV), Sb(III), Bi(III), Pb(II), Au(III), Cu(II) and Zn(II) and from its ternary mixtures with Sb(III), Bi(III) and Cu(II), Au(III). The proposed method was applied for separation and determination of tin(IV) in tin bearing alloys and foodstuffs.     

Solvent extraction of scandium from malonic acid with high molecular-weight amines

Scandium is quantitatively extracted with 4% Amberlite LA-1 or Amberlite LA-2 in xylene at pH 2.5-5.5 from 0.1M malonic acid. Scandium is stripped from the organic phase with 0.5M hydrochloric acid and determined spectrophotometrically at 525 nm, as its complex with Alizarin Red S. Primene JM-T, tri-iso-octylamine, tributylamine and tribenzylamine have also been studied as extractants, but found to be unsatisfactory for various reasons. Xylene, toluene, benzene, chloroform, carbon tetrachloride, hexane, cyclohexane and kerosene have been studied as diluents. Xylene is found to be the most efficient. Scandium can be separated from most metals by selective extraction, and from gallium, thallium(III), bismuth, antimony(III), chromium(III), copper(II), iron(III), uranium(VI), cerium, zirconium, indium, thorium and titanium by selective stripping, in some cases combined with use of suitable complexing media to retain the other metals in the organic phase.     

Studies on the extraction and spectrophotometric determination of Ni(II), Fe(II), Fe(III) and V(IV) with bis(4-hydroxypent-2-ylidene)diaminoethane

The extraction of Ni(II), Fe(II), Fe(III) and V(IV) with bis(4-hydroxypent-2-ylidene)-diaminoethane from various acids and buffer solutions has been studied. The golden yellow Fe(II) and wine-red Fe(III) complexes have maximum absorption at 445 and 435 nm respectively, and the yellow-green Ni(II) chelate shows two maxima, at 373 and 560 nm. The blue-green V(IV) chelate also has two maxima, at 580 and 660 nm. These characteristics can be used for the determination of these species. Iron, nickel and vanadium have been separated and determined in the presence of one another and of many other elements.     

Studies on the liquid-liquid extraction of iron(III) and titanium(IV) with 3-phenyl-4-benzoyl-5-isoxazolone

The extraction behaviour of iron(III) and titanium(IV) from acidic chloride solutions has been investigated using 3-phenyl-4-benzoyl-5-isoxazolone (HPBI) in xylene as an extractant. The results demonstrate that these metal ions are extracted into xylene as Fe(PBI)(3) and TiO(PBI)(2). The equilibrium constants of the extracted complexes have been deduced by non-linear regression analysis by taking into account complexation of metal ion with inorganic ligands in the aqueous phase and all plausible complexes extracted into the organic phase. IR and proton NMR ((1)H NMR) spectra were used to further clarify the nature of complexes extracted into organic phase. The effect of the nature of the diluent on the extraction of iron(III) and titanium(IV) has been studied and correlated with dielectric constants. The extraction behaviour of titanium(IV) has also been compared with that of other metal ions, viz. magnesium(II), vanadium(V), chromium(VI), iron(III), manganese(II), zinc(II) and zirconium(IV), which are associated with the titanium in waste chloride liquors of the titanium-mineral-processing industry.     

Solvent extraction of trivalent indium from succinate solution by 2-octylaminopyridine in chloroform

Extraction processes of indium(III) with 2-octylaminopyridine (2-OAP) from media of various complexing ability, succinate and salicylate, in chloroform have been elucidated. The ion-pair complex has also quantitative extraction in xylene and 1,2-dichloroethane. Indium(III) from organic phase was stripped with 1.0 M hydrochloric acid and determined complexometrically with EDTA. The stoichiometry of the extracted species was found out on the basis of slope analysis. The extraction of indium(III) proceeds by an anion exchange mechanism and the extracted species is [RR′NH₂ ⁺In(succinate)₂ ^-]_(org). Temperature dependence of the extraction equilibrium constant was also examined to estimate the apparent thermodynamic functions (ΔH, ΔG and ΔS) for extraction reaction. It is possible to separate indium(III) from Zn(II), Cd(II), Pb(II), Hg(II), Bi(III), Tl(I), Tl(III), Ga(III), Al(III), Te(IV), Se(IV), Sb(III), Fe(III) and Sn(IV). The method is simple, rapid and reproducible and can be used to determine the indium from samples like alloys.     

Direct extraction of nickel from model sulfate solution with hydrazide of versatic <Emphasis Type="Italic">tert</Emphasis>-Carboxylic acids

Possibility of direct extraction of 0.66 g L–1 Ni(II), 0.048 g L^–1 Co(II), and 0.024 g L^–1 Zn(II) in the presence of the nine commonly accompanying elements from a model solution for underground sulfuric acid leaching of an oxidized Ni ore with a 0.4–0.6 M solution of a hydrazide of Versatic C₁₅–C₁₉ acids in kerosene was considered. The optimal conditions of extraction, extract washing to remove impurities, and re-extraction of Ni and Co were determined. It was found that the direct extraction of up to 90% of nickel, cobalt, and zinc is possible with an at least fivefold concentration in the extraction stage. The separation of Ni from Co and co-extracted Fe, Zn, and Mn is possible in the re-extraction stage by washing of the organic phase with a 0.5 M HCl solution.     

Metal chelate exchange in the organic phase-III Extraction and exchange constants of dithizonates and oxinates

Reactions between dithizonates and oxinates of Ag, Tl(I), Cu(II), Zn, Cd, Hg(II), Pb, Co(II), Ni, Pd, In, Ga and Bi in chloroform have been studied spectrophotometrically. From the exchange constants determined, the extraction constants of metal dithizonates or metal oxinates have been calculated. By this method extraction constants of many metal chelates can be calculated which are difficult to determine by studies of distribution between aqueous and chloroform phases.