PDDA修饰的碳纳米管载铂电催化剂的合成及其在碱性条件下的氧气还原反应催化性能

采用长链聚合物聚二烯丙基二甲基氯化铵(PDDA)对多壁碳纳米管(MWCNTs)进行修饰,并将采用胶体法还原出的铂(Pt)纳米粒子通过静电作用担载于PDDA修饰的多壁碳纳米管上,从而制备出Pt/PDDA/MWCNTs复合电催化剂.透射电镜(TEM)与X射线衍射(XRD)测试结果表明, Pt纳米粒子均匀地分布在MWCNTs的表面,其平均粒径约为3.6 nm.热失重分析显示催化剂的实际负载量为36%(w).旋转圆盘电极测试结果表明, Pt/PDDA/MWCNTs催化剂对碱性条件下的氧气还原反应(ORR)具有优异的催化活性.与负载量为40%(w)的商业Pt/C催化剂相比, Pt/PDDA/MWCNTs催化剂的氧气还原反应的起始电位和半波电位均正移约30 mV,其质量比活性更大.动力学研究结果进一步证实Pt/PDDA/MWCNTs催化剂比负载量为40%(w)的商业Pt/C催化剂在碱性条件下对氧气还原反应具有更优异的催化活性.     

石墨烯载Pt纳米粒子的原位还原制备及氧还原电催化性能

采用改进的化学氧化还原法(Hummers法)氧化鳞片石墨, 再超声振荡剥离得到氧化石墨烯(GO)水溶液. 通过聚二烯丙基二甲基氯化铵(PDDA)分子对GO表面功能化, 由于带正电荷的PDDA分子功能化的GO与带负电荷的^2-离子间的静电作用, 使Pt离子组装到GO表面, 再通过原位还原被束缚的Pt离子, 同时GO被还原成石墨烯片(GNs), 得Pt/PDDA-GNs催化剂. 相对空白GNs负载的Pt纳米粒子和商业化Pt/C(JM), Pt/PDDA-GNs催化剂有较高的氧还原活性和稳定性. 前者可归因于Pt颗粒尺寸细小和分散度较高, 后者是由于PDDA分子与Pt原子间的电子作用及对Pt颗粒的钉扎作用, 从而减缓了Pt的氧化和迁移.     

Preparation of polymeric modifier-attached graphene-supported bimetallic Pt–Pd nanocomposites,and their electrochemical properties as electro-catalysts

Graphene-supported bimetallic nanocomposites were synthesized by a modified sodium borohydride reduction method. Poly(diallyldimethylammonium chloride) (PDDA) was used as modifier for good dispersion and higher metal alloy content. The micro-structure and dispersive properties of the electro-catalysts were determined by X-ray diffraction, Fourier-transform-infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. The electrochemical properties of the Pt–Pd electro-catalysts were studied by cyclic voltammetry. This analysis confirmed that functional groups on the graphene oxide (GO) sheet were chemically bonded to the PDDA layer. The average particle diameter of Pt–Pd_{1 to 0.5}–PDDA–reduced graphene oxide (RGO) was found to be 2.4 ± 0.4 nm which is the smallest platinum metal particle size among Pt–Pd–PDDA–RGO electro-catalysts. The electrochemically active surface area was studied and the activity was found to be enhanced by use of the polymeric modifier.     

Designer Gold-Framed Palladium Nanocubes for Plasmon-Enhanced Electrocatalytic Oxidation of Ethanol

Surface plasmon of coinage metal nanostructures has been employed as a powerful route in boosting the performances in heterogenous catalysis. Development of efficient plasmonic nanocatalysts with high catalytic performance and efficient light harvesting properties is of vital importance. Herein, we rationally designed and synthesized a plasmonic nanocatalyst composed of Au-framed Pd nanocubes by an Ag(I)-assisted seed-mediated growth method. In the synthesis, the incorporation of Ag(I) suppresses the reduction of Au on the {100} surface of cubic Pd seeds and leads to the formation of Au nanoframes on the Pd nanocubes. The unique Au-framed Pd nanocubes can integrate the superior electrocatalytic of Pd and the outstanding plasmonic properties of Au. Thus, these nanostructures were employed as plasmonic nanocatalysts for plasmon-enhanced electrocatalytic oxidation of ethanol with improved stability.     

Silver Coated Platinum Core–Shell Nanostructures on Etched Si Nanowires: Atomic Layer Deposition (ALD) Processing and Application in SERS

A new method to prepare plasmonically active noble metal nanostructures on large surface area silicon nanowires (SiNWs) mediated by atomic layer deposition (ALD) technology has successfully been demonstrated for applications of surface‐enhanced Raman spectroscopy (SERS)‐based sensing. As host material for the plasmonically active nanostructures we use dense single‐crystalline SiNWs with diameters of less than 100 nm as obtained by a wet chemical etching method based on silver nitrate and hydrofluoric acid solutions. The SERS active metal nanoparticles/islands are made from silver (Ag) shells as deposited by autometallography on the core nanoislands made from platinum (Pt) that can easily be deposited by ALD in the form of nanoislands covering the SiNW surfaces in a controlled way. The density of the plasmonically inactive Pt islands as well as the thickness of noble metal Ag shell are two key factors determining the magnitude of the SERS signal enhancement and sensitivity of detection. The optimized Ag coated Pt islands on SiNWs exhibit great potential for ultrasensitive molecular sensing in terms of high SERS signal enhancement ability, good stability and reproducibility. The plasmonic activity of the core‐shell Pt//Ag system that will be experimentally realized in this paper as an example was demonstrated in numerical finite element simulations as well as experimentally in Raman measurements of SERS activity of a highly diluted model dye molecule. The morphology and structure of the core‐shell Pt//Ag nanoparticles on SiNW surfaces were investigated by scanning‐ and transmission electron microscopy. Optimized core–shell nanoparticle geometries for maximum Raman signal enhancement is discussed essentially based on the finite element modeling.     

Electrochemical templating of metal nanoparticles and nanowires on single-walled carbon nanotube networks

The use of single-walled carbon nanotube (SWNT) networks as templates for the electrodeposition of metal (Ag and Pt) nanostructures is described. Pristine SWNTs, grown on insulating SiO2 surfaces using catalyzed chemical vapor deposition, served as the working electrode. In the simplest case, electrical contact was made by depositing a gold strip on the SWNT substrate (device 1). Deposition of Ag and Pt over extensive periods (30 s) resulted in a high density of particles on the SWNTs, with almost contiguous nanowire formation from the Au/SWNT boundary moving to isolated nanoparticles at further distances from the contact. For direct electrochemical studies of Ag and Pt nucleation, the assembly was coated in a resist layer and a small window opened up to expose only the electrically connected SWNTs to solution (device 2). In this case, the electrochemical signature in voltammetric and amperometric studies of metal deposition was due solely to processes at the SWNTs. Coupled with high-resolution microscopy measurements (atomic force microscopy and field emission scanning electron microscopy), this approach provided detail on the nucleation and growth mechanisms of Ag and Pt on SWNTs under electrochemical control. In particular, Ag growth was found to be rapid and progressive with an increasing nanoparticle density with time, whereas Pt deposition was characterized by lower nucleation densities and slower growth rates with a tendency for larger particles to be produced over long times.     

Pt 纳米颗粒在聚二甲基二烯丙基氯化铵功能化碳纳米管上的自发沉积及其对甲醇的电氧化性能

利用聚二甲基二烯丙基氯化铵(PDDA)非共价修饰的碳纳米管(CNTs)与PtCl₆^2-之间的自发氧化还原作用, 制备了Pt 纳米颗粒(Pt NPs)/CNTs-PDDA复合催化剂. PDDA在该催化剂中具有三种作用: (1) 作为金属前驱体PtCl₆^2-还原为Pt NPs 的还原剂; (2) 作为原位产生的Pt NPs 的稳定剂; (3) 在CNTs 表面形成保护膜抑制CNTs 在甲醇电催化氧化过程中的腐蚀. 采用傅里叶变换红外(FTIR)光谱、热重分析和拉曼光谱对CNTs-PDDA进行了表征, 表明PDDA通过π-π作用已成功覆盖在CNTs 表面, 并且修饰过程没有导致CNTs 结构的破坏. 采用透射电子显微镜(TEM)对Pt NPs/CNTs-PDDA 催化剂进行了表征, 结果表明, Pt NPs 均匀地分散在CNTs上, 平均粒径约2 nm, 且粒径分布范围窄. 用循环伏安法、计时电流法进一步考察了Pt NPs/CNTs-PDDA催化剂在酸性介质中对甲醇的电催化氧化的性能. 电化学测试结果表明, 与原始CNTs 负载的Pt NPs催化剂相比,Pt NPs/CNTs-PDDA催化剂具有更高的电化学活性表面积、电催化质量比活性和稳定性.     

Heterogeneous Au-Pt nanostructures with enhanced catalytic activity toward oxygen reduction

Heterogeneous Au-Pt nanostructures have been synthesized using a sacrificial template-based approach. Typically, monodispersed Au nanoparticles are prepared first, followed by Ag coating to form core-shell Au-Ag nanoparticles. Next, the galvanic replacement reaction between Ag shells and an aqueous H(2)PtCl(6) solution, whose chemical reaction can be described as 4Ag + PtCl(6)(2-)→ Pt + 4AgCl + 2Cl(-), is carried out at room temperature. Pure Ag shell is transformed into a shell made of Ag/Pt alloy by galvanic replacement. The AgCl formed simultaneously roughens the surface of alloy Ag-Pt shells, which can be manipulated to create a porous Pt surface for oxygen reduction reaction. Finally, Ag and AgCl are removed from core-shell Au-Ag/Pt nanoparticles using bis(p-sulfonatophenyl)phenylphosphane dihydrate dipotassium salt to produce heterogeneous Au-Pt nanostructures. The heterogeneous Au-Pt nanostructures have displayed superior catalytic activity towards oxygen reduction in direct methanol fuel cells because of the electronic coupling effect between the inner-placed Au core and the Pt shell.     

Highly efficient and stable electrooxidation of methanol and ethanol on 3D Pt catalyst by thermal decomposition of In_2O_3 nanoshells

In this paper In_2O_3 nanoshells have been synthesized via a facile hydrothermal approach.The nanoshells can be completely cracked into pony-size nanocubes by annealing,which are then used as a support of Pt catalyst for methanol and ethanol electrocatalytic oxidation.The prepared In_2O_3 and supported Pt catalysts(Pt/In_2O_3) were characterized by X-ray diffraction(XRD),energy dispersive X-ray spectroscopy(EDS),X-ray photoelectron spectroscopy(XPS),field effect scanning electron microscopy(FESEM),and transmission electron microscopy(TEM).Cyclic voltammetry(CV),linear sweep voltammetry(LSV),chronoamperometry and electrochemical impedance spectroscopy(EIS) were carried out,indicating the excellent catalytic performance for alcohol electrooxidation can be achieved on Pt/In_2O_3 nanocatalysts due to the multiple active sites,high conductivity and a mass of microchannels and micropores for reactant diffusions arising from 3D frame structures compared with that on the Pt/C catalysts.     

Control growth of uniform platinum nanotubes and their catalytic properties for methanol electrooxidation

Uniform platinum nanotubes have been synthesized by directly mixing Ag nanowires and H₂PtCl₆ in saturated NaI solutions at room temperature. The crystal structure of the obtained Pt nanotube has been investigated in detail by field-emission scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. Furthermore, their electrocatalytic behaviors for methanol oxidation in alkaline media have also been studied. Compared with conventional Pt/C catalysts, these hollow nanostructures possess high electrochemical active areas and demonstrate higher current densities.     

In Situ Single‐Nanoparticle Spectroscopy Study of Bimetallic Nanostructure Formation

Bimetallic nanostructures (NSs), with utility in catalysis, are typically prepared using galvanic exchange (GE), but the final catalyst morphology is dictated by the dynamics of the process. In situ single nanoparticle (NP) optical scattering spectroscopy, coupled with ex situ electron microscopy, is used to capture the dynamic structural evolution of a bimetallic NS formed in a GE reaction between Ag and [PtCl₆]^2?. We identify an early stage involving anisotropic oxidation of Ag to AgCl concomitant with reductive deposition of small Pt clusters on the NS surface. At later stages of GE, unreacted Ag inclusions phase segregate from the overcoated AgCl as a result of lattice strain between Ag and AgCl. The nature of the structural evolution elucidates why multi‐domain Ag/AgCl/Pt NSs result from the GE process. The complex structural dynamics, determined from single‐NP trajectories, would be masked in ensemble studies due to heterogeneity in the response of different NPs.     

Carbon-supported Pt^Ag nanostructures as cathode catalysts for oxygen reduction reaction

Pt(m)^Ag nanostructures (m being the atomic Pt/Ag ratio, m = 0.1-0.6) were prepared by reflux citrate reduction of PtCl(6)(2-) ions in aqueous solution containing colloidal Ag (6.3 ± 3.9 nm). A distinct alloying of Pt with Ag was detected due to an involvement of the galvanic replacement reaction between PtCl(6)(2-) and metallic Ag colloids. The nanostructure transformed from a structure with an Ag-core and an alloyed PtAg-shell to a hollow PtAg alloy structure with the increase in m. Compared to a commercial E-TEK Pt/C catalyst, the catalytic performance of Pt in the Pt(m)^Ag/C samples for the cathode oxygen reduction reaction (ORR) strongly correlated with the electronic structure of Pt, as a consequence of varied Pt dispersion and Pt-Ag interaction. With either H(2)SO(4) or KOH as an electrolyte, Pt in the Pt(m)^Ag nanostructures with a relatively high m (≥0.4) showed significantly enhanced intrinsic activity whereas Pt in those catalysts with low m (≤0.2) appeared less active than the Pt/C catalyst. These data are used to discuss the role of electronic structure and geometric effects of Pt toward ORR.     

A general method for the rapid synthesis of hollow metallic or bimetallic nanoelectrocatalysts with urchinlike morphology

We have reported a facile and general method for the rapid synthesis of hollow nanostructures with urchinlike morphology. In-situ produced Ag nanoparticles can be used as sacrificial templates to rapidly synthesize diverse hollow urchinlike metallic or bimetallic (such as Au/Pt) nanostructures. It has been found that heating the solution at 100 degrees C during the galvanic replacement is very necessary for obtaining urchinlike nanostructures. Through changing the molar ratios of Ag to Pt, the wall thickness of hollow nanospheres can be easily controlled; through changing the diameter of Ag nanoparticles, the size of cavity of hollow nanospheres can be facilely controlled; through changing the morphologies of Ag nanostructures from nanoparticle to nanowire, hollow Pt nanotubes can be easily designed. This one-pot approach can be extended to synthesize other hollow nanospheres such as Pd, Pd/Pt, Au/Pd, and Au/Pt. The features of this technique are that it is facile, quick, economical, and versatile. Most importantly, the hollow bimetallic nanospheres (Au/Pt and Pd/Pt) obtained here exhibit an area of greater electrochemical activity than other Pt hollow or solid nanospheres. In addition, the approximately 6 nm hollow urchinlike Pt nanospheres can achieve a potential of up to 0.57 V for oxygen reduction, which is about 200 mV more positive than that obtained by using a approximately 6 nm Pt nanoparticle modified glassy carbon (GC) electrode. Rotating ring-disk electrode (RRDE) voltammetry demonstrates that approximately 6 nm hollow Pt nanospheres can catalyze an almost four-electron reduction of O(2) to H(2)O in air-saturated H(2)SO(4) (0.5 M). Finally, compared to the approximately 6 nm Pt nanoparticle catalyst, the approximately 6 nm hollow urchinlike Pt nanosphere catalyst exhibits a superior electrocatalytic activity toward the methanol oxidation reaction at the same Pt loadings.     

Co-adsorption of CO onto a Ag-modified Pt(111)--restructuring of a Ag UPD layer monitored by EC-STM

The effect of co-adsorption of CO on an underpotentially deposited (UPD) silver monolayer on a Pt(111) single crystal electrode in 0.05 M sulfuric acid is investigated for the first time by means of electrochemical scanning tunneling microscopy (EC-STM). Pure electrochemical experiments suggest that the co-adsorption of CO onto Pt single crystal electrodes previously modified by a monolayer of Ag, forces Ag atoms of the first UPD monolayer into a second adlayer. The present EC-STM studies reveal the formation of a large-area Ag network after the co-adsorption of CO. The resulting Ag nanostructures formed on wide Pt(111) terraces are approximately 0.5 nm high and 10 nm wide. The desorption of the newly formed second Ag adlayer, the oxidation of CO and the desorption of Ag atoms from the first adlayer are monitored by EC-STM and simultaneously detected in the corresponding CVs in three different oxidation peaks. EC-STM images recorded afterwards show the unchanged Pt surface. The presence of Ag on the surface leads to a downward shift of the onset of oxygen adsorption on the Pt(111) surface.     

Controllable fabrication of platinum nanospheres with a polyoxometalate-assisted process

Pt nanospheres with an average diameter of 60±10 nm have been successfully synthesized at room temperature through a facile polyoxometalate(POM)-assisted process. Characterization by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) clearly showed that these Pt nanospheres consisted of 2-7 nm Pt nanodots. During the formation of such unique nanostructures, POMs were found to serve as both catalyst and stabilizer. The size of the as-synthesized Pt nanospheres could be controlled solely by adjusting the molar ratio of POMs to H₂PtCl₆. A possible formation mechanism based on POMs-mediated electron transfer from ascorbic acid (AA) to PtCl₆²⁻ and AA-assisted aggregation was tentatively proposed to rationalize the formation of such nanostructures. Importantly, these specific Pt nanospheres exhibited good electrocatalytic activity towards the oxidation of methanol, making them promising for applications in direct methanol fuel cells.     

One step in situ synthesis of Ag/AgCl nanoparticles in a cellulose nanofiber matrix for the development of energy storage paper

Cellulose - In the present work, we prepare Cellulose Nanofibers Films (CNFs) incorporating silver nanostructures (Ag/AgCl nanocubes) in a ratio of 1–20 wt% to the organic matrix. We found...     

FDU-15-Pt composites with different Pt loading and their electrocatalytic reduction to ultratrace nitroaromatic compounds

FDU-15 is a hexagonal mesoporous material with nanometer-sized, highly ordered arrays and large special surface area. In this work, FDU-15-Pt with 2.0%, 5.0% and 8.0% Pt loading were synthesised and used for electrochemical detection of trace nitroaromatic compounds (NACs). The FDU-15-Pt samples were characterised by CO Chemisorption, transmission electron microscopy (TEM) and X-ray diffraction (XRD). It has been demonstrated that FDU-15-Pt with 2.0% Pt loading has the smallest Pt particle size of 2.9?nm, highest Pt metal dispersion of 37.7% and largest Pt metal surface area of 21.36?m^2?g^?1. The FDU-15-Pt/PDDA modified electrode were assembled by electrostatic adsorption of Poly (diallyldimethylammonium chloride) (PDDA) and FDU-15-Pt. The 2.0% FDU-15-Pt modified sensor showed higher selectivity for NACs than those of 5.0% and 8.0% FDU-15-Pt, which were verified by electrochemical experiments. A linear response over TNT concentration ranging from 8.8?×?10^?9?M to 1.2?×?10^?5 M was exhibited with a low detection limit of 2.9?×?10^?9?M (S/N?=?3). Moreover, the proposed 2.0% FDU-15-Pt/PDDA modified sensor has been applied to the detection of NACs in spiked environmental water samples and shows promise for fast and accurate determination of trace NACs in real samples.     

核壳纳米粒子与牛血清白蛋白表面增强拉曼光谱的研究

本文用表面增强拉曼光谱(SERS)系统地研究了牛血清白蛋白(BSA)与Ag/Pt核壳纳米粒子的相互作用,特别是核壳纳米粒子与被吸附的牛血清白蛋白分子之间的界面作用,并用紫外可见光谱、圆二色光谱(CD)作为辅助手段进一步证实了BSA与核壳纳米粒子的作用状况.通过紫外光谱研究发现,核壳纳米粒子的特征吸收峰的消失表明纳米粒子完全被牛血清白蛋白包覆.用近紫外CD光谱探讨了血清白蛋白的芳基氨基酸(苯丙氨酸、酪氨酸)残基微环境的变化.为探讨牛血清白蛋白与Ag/Pt核壳纳米粒子的作用机理及纳米尺寸的生物效应奠定了理论基础.     

聚乙烯吡咯烷酮辅助的水热法合成形貌可控的银纳米结构

以不同平均分子质量的聚乙烯吡咯烷酮(PVP,通常用K值来表示PVP溶液相对粘度的特征值,粘度越大,PVP平均分子质量越大,平均分子质量为8000、40000、160000、360000的PVP分别标记为K17、K30、K60、K90)为表面活性剂,通过水热法合成了形貌和光学共振峰可控的银纳米结构.将反应体系加入到60 mL的不锈钢高压反应釜中,在一定的温度下加热数小时.我们在K17的水溶液中合成了尺寸均一的五重孪晶银纳米十面体.而在K30、K60和K90的乙二醇(EG)溶液中得到了纵横比随着PVP分子质量增大而增大的银纳米线.产物的形貌和微结构通过透射电镜(TEM)和场发射扫描电镜(FE-SEM)进行表征,表面等离子共振(SPR)吸收峰通过紫外-可见分光光度计进行测试,结果显示银纳米结构的表面等离子共振随着其形貌和尺寸的改变而发生变化.     

Visualization of the Local Catalytic Activity of Electrodeposited Pt–Ag Catalysts for Oxygen Reduction by means of SECM

Pt–Ag nanoparticle co‐deposits with different Pt–Ag ratios were prepared on a glassy carbon (GC) surface by pulsed electrodeposition and investigated for their catalytic activity in electrocatalytic oxygen reduction by using cyclic voltammetry (CV), rotating disc electrode (RDE) and scanning electrochemical microscopy (SECM) in 0.1 M phosphate buffer (pH 7.0). The atomic composition of the Pt–Ag co‐deposits was studied by means of energy‐dispersive X‐ray analysis (EDAX). In combination with X‐ray diffraction (XRD), the presence of partly alloyed Pt and Ag on the GC surface was confirmed. Scanning electron microscopy (SEM) images indicate that the prepared Pt–Ag catalyst particles are homogenously dispersed over the GC surface. Their size and morphology depend on their composition. The electrocatalytic activity of Pt–Ag deposits with high Pt content was the highest, exceeding even that of electrodeposited Pt as evaluated by quantitative RDE analysis. The redox competition mode of scanning electrochemical microscopy (RC‐SECM) was successfully used to visualize the local catalytic activity of the deposited Pt–Ag particles. Semi‐quantitative assessment of the SECM results confirmed the same order of activity of the different catalysts as the RDE investigations.