Comparative analysis of ancient ceramics by neutron activation analysis,inductively coupled plasma-optical-emission spectrometry,inductively coupled plasma-mass spectrometry,and X-ray fluorescence

The accurate measurement of the maximum possible number of elements in ancient ceramic samples is the main requirement in provenance studies. For this reason neutron activation analysis (NAA) and X-ray fluorescence (XRF) have been successfully used for most of the studies. In this work the analytical performance of inductively coupled plasma-optical-emission spectrometry (ICP-OES) and inductively coupled plasma-mass spectrometry (ICP-MS) has been compared with that of XRF and NAA for the chemical characterization of archaeological pottery. Correlation coefficients between ICP techniques and XRF or NAA data were generally better than 0.90. The reproducibility of data calculated on a sample prepared and analysed independently ten times was approximately 5% for most of the elements. Results from the ICP techniques were finally evaluated for their capacity to identify the same compositional pottery groups as results from XRF and NAA analysis, by use of multivariate statistics.     

Human albumin as a reference material for trace elements

Summary An investigation through interlaboratory comparison using different analytical techniques has been carried out in order to assess the suitability of a plasma protein solution as a source for a trace element reference material in clinical analysis. Reasonable agreement was obtained for a number of elements from the range studied: Al, Ba, Cr, Cu, Fe, Mg, Mn, Mo, Ni, Se, Sr, V and Zn. The techniques used included flame and furnace atomic absorption spectrometry (FAAS and ETA-AAS), furnace atomic emission spectrometry (ETA-AES), inductively coupled plasma atomic emission spectrometry (ICP-AES), inductively coupled plasma mass spectrometry (ICP-MS), and simultaneous multi-element atomic absorption spectrometry (SIMAAC). Results indicated that this plasma protein solution may prove useful as a source for a reference material covering trace element levels outwith the range found in normal human plasma.

---

Humanalbumin als Referenzmaterial für Spurenelemente

     

Cross-validation and evaluation of the performance of methods for the elemental analysis of forensic glass by μ-XRF, ICP-MS, and LA-ICP-MS

Elemental analysis of glass was conducted by 16 forensic science laboratories, providing a direct comparison between three analytical methods [micro-x-ray fluorescence spectroscopy (μ-XRF), solution analysis using inductively coupled plasma mass spectrometry (ICP-MS), and laser ablation inductively coupled plasma mass spectrometry]. Interlaboratory studies using glass standard reference materials and other glass samples were designed to (a) evaluate the analytical performance between different laboratories using the same method, (b) evaluate the analytical performance of the different methods, (c) evaluate the capabilities of the methods to correctly associate glass that originated from the same source and to correctly discriminate glass samples that do not share the same source, and (d) standardize the methods of analysis and interpretation of results. Reference materials NIST 612, NIST 1831, FGS 1, and FGS 2 were employed to cross-validate these sensitive techniques and to optimize and standardize the analytical protocols. The resulting figures of merit for the ICP-MS methods include repeatability better than 5 % RSD, reproducibility between laboratories better than 10 % RSD, bias better than 10 %, and limits of detection between 0.03 and 9 μg g^?1 for the majority of the elements monitored. The figures of merit for the μ-XRF methods include repeatability better than 11 % RSD, reproducibility between laboratories after normalization of the data better than 16 % RSD, and limits of detection between 5.8 and 7,400 μg g^?1. The results from this study also compare the analytical performance of different forensic science laboratories conducting elemental analysis of glass evidence fragments using the three analytical methods.

Determination of the age of highly enriched uranium

This paper describes the analytical methods (thermal ionization mass spectrometry, inductively coupled plasma mass spectrometry, and alpha spectrometry) that have been developed for determination of the age of uranium and discusses their advantages and limitations. With regard to potential application of the methods (e.g. Fissile Material Cut-off Treaty), the discussion focuses on highly enriched uranium, because this seems to be of highest strategic relevance.The different analytical methods were tested and validated by use of uranium reference materials of different (235)U isotope abundance and of known ages. The results show that thermal ionization mass spectrometry and alpha spectrometry are both very accurate and precise techniques for this application. Inductively coupled plasma mass spectrometry, on the other hand, although less precise, because of the different approach to the analytical problem, is still sufficiently accurate to be used as a rapid screening method.     

Acid interferences in atomic spectrometry: analyte signal effects and subsequent reduction

When considering elemental analysis by atomic spectrometry techniques (e.g. flame atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry), the sample is normally introduced as a solution. In many instances an acid is present in that solution, as a result of previous sample preparation steps, analyte stabilization procedures, etc. Therefore, acids are among the most common matrices involved in spectroscopic analysis. The effect of the acid on the different stages taking place during the whole analytical process has been reviewed. Attention has been paid to the three techniques mentioned above. The results summarized here reveal the crucial role that acids play in atomic spectrometry, being one of the most important sources of interferences suffered by these techniques. In the last part of this bibliographic survey, the methods found for correction of the acid effect are mentioned and briefly described.     

An international intercalibration for methylmercury in biological tissue

An intercalibration exercise between 13 laboratories from seven countries was conducted for comparing the methylmercury measurement techniques for marine biological tissues. Analyses have been conducted on two sets of samples: a fish muscle and a mussel soft tissue. Most of the participating laboratories performed six replicate analyses, allowing statistical comparisons. Various analytical techniques have been used, including cold vapour atomic absorption spectrophotometry (CVAA), electron capture gas liquid chromatography (GCEC), neutron activation (NAA), and inductively coupled plasma–isotopic dilution mass spectrometry (ICPIDMS). All of these methods offer similar results. They allow us to define consensus values which seem good estimates of the real concentrations. In addition the results show, for most of the participating laboratories, good accuracy and precision in the determination.     

Analysis of a copper alloy: Comité Consultatif pour la Quantite de Matière (CCQM) pilot study P76 international intercomparison

The capabilities of National Metrology Institutes (NMIs) and selected outside “expert” laboratories of determining the mass fractions of the main and minor elements Cu, Pb, Sn, Fe, and Ni in a lead-containing brass were assessed. This pilot study P76 was organized as an activity of the Inorganic Analysis Working Group of CCQM and was piloted by the Federal Institute for Materials Research and Testing (BAM). In total 12 laboratories (four NMIs and eight outside labs) submitted results, some of them more than one set of results per element. The laboratories were free to choose any analytical method they wanted to use for the analysis. Consequently various methods of measurement were employed: inductively coupled plasma optical emission spectrometry (ICP–OES), inductively coupled plasma mass spectrometry (ICP–MS), instrumental neutron-activation analysis (INAA), titrimetry, flame atomic-absorption spectrometry (FAAS), spectrophotometry (MAS), electrogravimetry, and gravimetric analysis. After testing for homogeneity within BAM, a certified reference material of lead-containing brass was used as test sample without informing the participants about the source of the material. The agreement of the results for all elements investigated was acceptable and mean values calculated from the results of all participants were close to the certified mass fractions of the CRM used as test sample. No statistically significant differences between the results of the NMIs and those of the non-NMIs could be observed.     

Mass spectrometric analysis of ceramic components for solid oxide fuel cells

For the determination of trace impurities in ceramic components of solid oxide fuel cells (SOFCs), some mass spectrometric methods have been applied such as spark source mass spectrometry (SSMS), laser ionization mass spectrometry (LIMS), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and inductively coupled plasma mass spectrometry (ICP-MS). Due to a lack of suitable standard reference materials for quantifying of analytical results on La _x Sr _y MnO₃ cathode material a matrix-matched synthetic standard-high purity initial compounds doped with trace elements-was prepared in order to determine the relative sensitivity coefficients in SSMS and LA-ICP-MS. Radiofrequency glow discharge mass spectrometry (rf-GDMS) was developed for trace analysis and depth profiling of thick non-conducting layers. Surface analytical techniques, such as secondary ion mass spectrometry (SIMS) and sputtered neutral mass spectrometry (SNMS), were used to determine the element distribution on surfaces (homogeneity) and the surface contaminants of SOFC ceramic layers.Dedicated to Professor Dr. rer. nat. Hubertus Nickel on the occasion of his 65th birthday     

单一稀土元素检测方法的新近进展

本文对1999～2004年间有关单一稀土元素检测方法的研究进展进行了综述,内容包括原子吸收/原子荧光光谱法,荧光光度法,X-射线荧光光谱法,中子活化分析,电感耦合等离子体原子发射光谱法、电感耦合等离子体质谱法以及其干扰效应、进样技术和分析应用.引用文献127篇.     

On the possibilities of inductively coupled plasma mass spectrometry for analysis of archaeological bones for reconstruction of paleodiet

The possibilities of inductively coupled plasma atomic mass spectrometry for determination of elemental composition of archaeological bones for reconstruction of paleodiet are discussed. The interferences of different polyatomic ions on the determination of Fe, Cu, Mg, Mn, Zn, and Zr are investigated and evaluated. Thus, a method for the determination of Al, As, Ba, Mg, Pb, Sr, V, Zn, and Zr is proposed and is validated by analysis of IAEA-SRM-H-5 (animal bone). The applicability of the proposed procedure is demonstrated analyzing real archaeological bone samples dated to 4th century b.c. and the results are compared with the data obtained by inductively coupled plasma atomic emission spectrometry.     

Determination of metals in biofluids and tissues: sample preparation methods for atomic spectroscopic techniques

Several sample preparation methods unique to each instrumental technique exist for the elemental analysis of biological specimens, but no review or book has dealt with them. The present review is an attempt to fill this void and focuses on sample preparation methods unique to atomic and X-ray spectroscopic techniques. The techniques covered are: flame and electrothermal AAS, inductively coupled plasma atomic emission spectrometry (ICP-AES), inductively coupled plasma mass spectrometry (ICP-MS) and X-ray fluorescence spectrometry (XRF) since these are most commonly used in trace element analysis of biological materials. The intent is not to present the procedural details for the various tissues or elements, but rather to highlight the methods which are unique to each instrument. The bibliography accompanying this review should aid the analytical chemist in his/her search for the detailed preparation protocols.     

硒的化学形态分析

对硒的化学形态分析的现状(1991-2006)进行了评述,主要涉及的分析方法有紫外-可见分光光度法、荧光光度法、氢化物发生(HG)原子荧光光谱法、HG原子吸收光谱法、电感耦合等离子体(ICP)原子发射光谱、气相色译原子吸收光谱联用、ICP-质谱与多种分析技术联用等(引用文献45篇).     

Determination of vanadium in petroleum and petroleum products using atomic spectrometric techniques

Vanadium is recognized worldwide as the most abundant metallic constituent in petroleum. It is causing undesired side effects in the refining process, and corrosion in oil-fired power plants. Consequently, it is the most widely determined metal in petroleum and its derivatives. This paper offers a critical review of analytical methods based on atomic spectrometric techniques, particularly flame atomic absorption spectrometry (FAAS), electrothermal atomic absorption spectrometry (ET AAS), inductively coupled plasma optical emission spectrometry (ICP OES), inductively coupled plasma mass spectrometry (ICP-MS). In addition an overview is provided of the sample pretreatment and preparation procedures for vanadium determination in petroleum and petroleum products. Also included are the most recent studies about speciation and fractionation analysis using atomic spectrometric techniques.     

Inorganic trace analysis by mass spectrometry

Mass spectrometric methods for the trace analysis of inorganic materials with their ability to provide a very sensitive multielemental analysis have been established for the determination of trace and ultratrace elements in high-purity materials (metals, semiconductors and insulators), in different technical samples (e.g. alloys, pure chemicals, ceramics, thin films, ion-implanted semiconductors), in environmental samples (waters, soils, biological and medical materials) and geological samples. Whereas such techniques as spark source mass spectrometry (SSMS), laser ionization mass spectrometry (LIMS), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), glow discharge mass spectrometry (GDMS), secondary ion mass spectrometry (SIMS) and inductively coupled plasma mass spectrometry (ICP-MS) have multielemental capability, other methods such as thermal ionization mass spectrometry (TIMS), accelerator mass spectrometry (AMS) and resonance ionization mass spectrometry (RIMS) have been used for sensitive mono- or oligoelemental ultratrace analysis (and precise determination of isotopic ratios) in solid samples. The limits of detection for chemical elements using these mass spectrometric techniques are in the low ng g⁻¹ concentration range. The quantification of the analytical results of mass spectrometric methods is sometimes difficult due to a lack of matrix-fitted multielement standard reference materials (SRMs) for many solid samples. Therefore, owing to the simple quantification procedure of the aqueous solution, inductively coupled plasma mass spectrometry (ICP-MS) is being increasingly used for the characterization of solid samples after sample dissolution. ICP-MS is often combined with special sample introduction equipment (e.g. flow injection, hydride generation, high performance liquid chromatography (HPLC) or electrothermal vaporization) or an off-line matrix separation and enrichment of trace impurities (especially for characterization of high-purity materials and environmental samples) is used in order to improve the detection limits of trace elements. Furthermore, the determination of chemical elements in the trace and ultratrace concentration range is often difficult and can be disturbed through mass interferences of analyte ions by molecular ions at the same nominal mass. By applying double-focusing sector field mass spectrometry at the required mass resolution—by the mass spectrometric separation of molecular ions from the analyte ions—it is often possible to overcome these interference problems. Commercial instrumental equipment, the capability (detection limits, accuracy, precision) and the analytical application fields of mass spectrometric methods for the determination of trace and ultratrace elements and for surface analysis are discussed.     

Contribution of bulk mass spectrometry isotopic analysis to characterization of materials in the framework of CMX-4

Journal of Radioanalytical and Nuclear Chemistry - Seven laboratories used the results of bulk uranium isotopic analysis by either inductively coupled plasma mass spectrometry (ICP-MS) or thermal...     

高纯硅溶胶成分标准物质的制备

采用离子交换法实现了高纯硅溶胶主成分与众多杂质离子的分离,并制备了高纯硅溶胶标准物质。多家实验室采用原子吸收光谱、电感耦合等离子体发射光谱、离子色谱等不同原理的方法协同定值;利用称量法对二氧化硅含量进行定值;用方差统计方法对定值结果进行数据处理和不确定度评定。     

Role of Modern Analytical Chemistry in Material Analyses for Trace Metals

The trend in the modern analytical laboratory is toward lower and lower analytical concentration measurements. The analyst has a variety of analytical instruments and techniques in which to meet the ever growing need for lower concentration measurements with improved precision and accuracy. Techniques available to the analyst include flame and electrothermal atomization-atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry, inductively coupled plasma/mass spectrometry, laser enhanced ionization spectrometry, neutron activation analysis, spectrophotometry, isotope dilution mass spectrometry, X-ray fluorescence spectometry, electroanalytical, and chromatography. However, there is no analytical technique that is a panacea for all analytes in the modern analytical laboratory. Steps the analyst must consider to obtain the highest degree of precision and accuracy include the obtaining of a representative sample, the selection of the “best” analytical method, the preparation of the sample, the calibration of the instrumentation, the deciding on the level of effort for the chemical measurement and the evaluation of the data are discussed.     

Determination of Trace Amounts of Cobalt in Blood

Abstract

The analysis of cobalt in whole blood and blood fractions has been carried out using three different analytical techniques namely, electrothermal atomic absorption spectrometry, inductively coupled plasma mass spectrometry and cathodic stripping voltammetry. This study showed that inductively coupled plasma mass spectrometry was the better equipped technique for conducting such analyses due to its low detection limits and wide linear dynamic range. The results ranged between 0.7 - 2.62 μg/l for plasma, 1.02 - 2.31 μg/l for serum, and 0.66 - 1.28 μg/l for whole blood. The introduction of different forms of cobalt to Wistar rats resulted in a differing distribution of the element between serum and whole blood. This observation suggests that there are at least two modes of Co uptake and transport depending on the administered or taken chemical form.     

Direct Determination of Aluminum in Archaeological Clays by Laser‐Induced Breakdown Spectroscopy

Abstract

Instrumental techniques that allow the direct analysis of solids with little or no sample preparation are particularly important for the evaluation of samples that are difficult to analyze such as refractory or geological materials. Laser‐induced breakdown spectroscopy (LIBS) is a promising technique for the direct, rapid analysis of elements in solid materials with minimal sample preparation. The main advantages over wet techniques are virtual nondestructiveness and analysis speed. The goal of this work is the direct determination of aluminum of archaeological pieces using laser‐induced breakdown spectroscopy. The corresponding signals of metals were interpolated from calibration graphs of different salts of the metals. The matrix effects from the direct determination of these elements were thoroughly investigated. The potential of this technique for direct quantitative analysis of real archaeological materials (from Department of Ancient Science, University of Zaragoza) was evaluated, and the reproducibility of LIBS spectra from different archaeological samples was measured as a function of the number of laser shots. Finally, the results from LIBS are compared with those obtained by laser ablation inductively coupled plasma mass spectrometry.