Transformation of biodegradable polyesters into cyclic oligomers under continuous flow using an enzyme-packed column

The enzymatic degradation of typical chemically synthesized biodegradable plastics, such as poly(butylene adipate) and poly(epsilon-caprolactone), to a repolymerizable cyclic oligomer under continuous flow using an enzyme column was studied, directed towards green chemical recycling. It was confirmed that both polymers were quantitatively transformed into the corresponding cyclic oligomers by passage through the column packed with immobilized lipase from Candida antarctica (Novozym 435) at 40 degrees C using a toluene solution. Compared to the batch treatment in a flask, a short reaction time and a low reaction temperature occurred for complete transformations of the polyesters by continuous flow through the enzyme column. The degradation activity of the enzyme column was maintained for at least six months at 40 degrees C. Conceptual scheme of the continuous degradation equipment using the enzyme column.     

Synthesis and ring‐opening polymerization of co‐cyclic(aromatic aliphatic disulfide) oligomers

An effective approach was presented for the synthesis of co‐cyclic(aromatic aliphatic disulfide) oligomers by catalytic oxidation of aromatic and aliphatic dithiols with oxygen in the presence of a copper‐amine catalyst. The aromatic dithiols can be 4,4′‐oxybis(benzenethiol), 4,4′‐diphenyl dithiol, 4,4′‐diphenylsulfone dithiol. The aliphatic dithiols can be 1,2‐ethanedithiol, 2,3‐butanedithiol, 1,6‐hexane dithiol. The co‐cyclic(aromatic aliphatic disulfide) oligomers were characterized by gradient HPLC, MALDI‐TOF‐MS, GPC, ¹H‐NMR, TGA, and DSC techniques. The glass transition temperatures of these co‐cyclics ranged from ?11.3 to 56.6°C. In general, these co‐cyclic(aromatic aliphatic disulfide) oligomers are soluble in common organic solvents, such as CHCl₃, THF, DMF, DMAc. These co‐cyclic oligomers readily underwent free radical ring‐opening polymerization in the melt at 180°C, producing linear, tough and high molecular weight poly(aromatic aliphatic disulfide)s. The glass transition temperatures of these polymers ranged from ?3.7 to 107.8°C that are higher than those of corresponding co‐cyclics. Copyright © 2003 John Wiley & Sons, Ltd.     

Ring‐opening polymerization of the cyclic dimer of poly(trimethylene terephthalate)

Poly(trimethylene terephthalate) (PTT) was prepared by the ring‐opening polymerization of its cyclic dimer. Antimony(III) oxide, titanium(IV) butoxide, dibutyltin oxide, and titanium(IV) isopropoxide were used as catalysts. Among the catalysts, titanium(IV) butoxide was the most effective for the same reaction conditions. A weight‐average molecular weight of 63,500 g/mol was obtained from ring‐opening poly merization at 265 °C for 2 h in the presence of 0.5 mol % titanium(IV) butoxide. The PTTs obtained from the polymerization catalyzed with increasing amounts of antimony(III) oxide showed increasing weight‐average molecular weights and reaction conversions. When 1 mol % antimony(III) oxide was used, the weight‐average molecular weight was 32,000 g/mol and the conversion was 82% after 1 h of polymerization at 265 °C. In the case of the polymer catalyzed by titanium(IV) butoxide under the same conditions, the weight‐average molecular weight and conversion were 40,000 g/mol and 77% when 0.25 mol % was used, whereas 0.5 mol % catalyst produced a weight‐average molecular weight of 27,000 g/mol and a conversion of 95%. To get an acceptable molecular weight and relatively high reaction conversion, a catalyst concentration of at least 0.5 mol % was found to be necessary, in contrast to conventional condensation polymerizations, which require only about one‐tenth of this amount of the catalyst. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6801–6809, 2006     

Controlled synthesis and chemical modification of unsaturated aliphatic (Co)polyesters based on 6,7‐dihydro‐2(3H)‐oxepinone

A pure unsaturated cyclic ester, 6,7‐dihydro‐2(3H)‐oxepinone (DHO2), was prepared by a new synthetic route. The copolymerization of DHO2 with ?‐caprolactone (?CL) was initiated by aluminum isopropoxide [Al(OⁱPr)₃] at 0 °C as an easy way to produce unsaturated aliphatic polyesters with nonconjugated C?C double bonds in a controlled manner. The chain growth was living, as certified by the agreement between the experimental molecular weight at total monomer conversion and the value predicted from the initial monomer/initiator molar ratio. The polydispersity was reasonably low (weight‐average molecular weight/number‐average molecular weight ≤ 1.2). The homopolymerization of DHO2 was, however, not controlled because of fast intramolecular transesterification. Copolymers of DHO2 and ?CL were quantitatively oxidized with the formation of epoxides containing chains. The extent of the epoxidation allowed the thermal properties and thermal stability of the copolyesters to be modulated. The epoxidized copolyesters were successfully converted into thioaminated chains, which were then quaternized into polycations. No degradation occurred during the chemical modification. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2286–2297, 2002     

Enzymatic transformation of bacterial polyhydroxyalkanoates into repolymerizable oligomers directed towards chemical recycling

The enzymatic transformation into an oligomer was carried out with the objective of developing the chemical recycling of bacterial polyesters. Poly(R-3-hydroxyalkanoate)s (PHAs), such as poly[(R-3-hydroxybutyrate)-co-12%(R-3-hydroxyhexanoate)] and poly[(R-3-hydroxybutyrate)-co-12%(R-3-hydroxyvalerate)], were degraded by granulated Candida antarctica lipase B immobilized on hydrophilic silica (lipase GCA) in a diluted organic solvent at 70 degrees C. The degradation products were cyclic oligomers having a molecular weight of a few hundreds. The obtained cyclic oligomer was readily repolymerized by the same lipase (lipase GCA) to produce the corresponding polyester in a concentrated solution. The cyclic oligomer was copolymerized with epsilon-caprolactone using lipase to produce the corresponding terpolymers having an Mw of 21,000. This is the first example of the enzymatic chemical recycling of bacterial PHAs using lipase. Poly(R-3-hydroxybutyrate) [P(3HB)] was also degraded into the linear-type R-3HB monomer to trimer by P(3HB)-depolymerase (PHBDP) in phosphate buffer at 37 degrees C. The degradation using PHBDP required a longer reaction time compared with the lipase-catalyzed degradation in organic solvent. The monomer composition of the oligomer depended on the origin of the PHBDP. The R-3HB monomer was predominately produced by PHBDP from Pseudomonas stutzeri, while the R-3HB dimer was produced by PHBDP from Alcaligenes faecalis T1. Repolymerization of these oligomers by lipase in concentrated organic solvent produced a relatively low-molecular-weight P(3HB) (e.g., Mw=2,000). Degradation of P(3HB) by lipase in organic solvent into repolymerizable cyclic oligomer and degradation of P(3HB) by PHBDP in buffer into hydroxy acid type R-3HB dimer.     

Bis(guanidinate) alkoxide complexes of lanthanides: synthesis, structures and use in immortal and stereoselective ring-opening polymerization of cyclic esters

A series of new bis(guanidinate) alkoxide Group 3 metal complexes [Ln((Me3Si)2NC(NiPr)2)2(OR)] (R=OtBu, Ln=Y, Nd, Sm, Lu; R=OiPr, Ln=Y, Nd, Lu) has been synthesized. X-ray structural determinations revealed that bis(guanidinate) tert-butoxides are monomeric complexes. The isopropoxide complex [Y((Me3Si)2NC(NiPr)2)2(OiPr)] undergoes slow decomposition in solution, to afford the unusual dimeric amido complex [(Y((Me3Si)2NC(NiPr)2)2(mu-N(iPr)C triple chemical bond N))2]. Complexes [Ln((Me3Si)2NC(NiPr)2)2(OR)] (R=OtBu, Ln=Y, Nd, Sm, Lu; R=OiPr, Ln=Y, Nd, Lu) are active catalysts/initiators for the ROP of rac-lactide and rac-beta-butyrolactone under mild conditions. Most of those polymerizations proceed with a significant degree of control. Bis(guanidinate) alkoxides appear to be well suited for achieving immortal polymerization of lactide, through the introduction of large amounts of isopropanol as a chain-transfer agent. The synthesized complexes are able to promote the stereoselective ROP of rac-beta-butyrolactone to afford syndiotactic poly(hydrobutyrate) through a chain-end control mechanism, while they are surprisingly non-stereoselective for the ROP of lactide under strictly similar conditions.     

Syntheses and radical ring-opening polymerization behavior of vinylcyclopropanone cyclic acetals having exomethylene and phenyl groups

Syntheses and radical ring-opening polymerizations of vinylcyclopropanone derivertives having cyclic six-membered acetal, exomethylene, and phenyl groups; 1-vinyl-6-methylene-4,8-dioxaspiro[2.5&]octane ( 2b ), 1-vinyl-5,7-dimethyl-6-methylene-4,8-dioxaspiro[2.5]octane ( 2c ), 1-vinyl-5-phenyl-4,8-dioxaspiro[2.5]octane ( 2d ), and 1-vinyl-5,7-diphenyl-4,8-dioxaspiro[2.5]octane ( 2e ), were carried out. The monomers were prepared by reactions of 1,1-dichloro-2-vinylcyclopropane and the corresponding diols in DMF in the presence of sodium hydride. Radical polymerizations of 2b – 2e were carried out at 60, 80, and 120°C in the presence of an appropriate initiator (3 mol % vs. monomer) in degassed sealed ampoules for 20 h. Although colorless transparent polymers (M̄_n 2300–13,500) were isolated by preparative HPLC for the most monomers, a crosslinked polymer was obtained in the case of 2b . The structures of the polymers were determined to consist of single and double ring-opening units. The content of the double ring-opened unit was 25–75% by comparison of IR spectra to a model compound. It is suggested that the double ring-opened propagating chain end is stabilized by the substituents on the cyclic acetal rings. The two-center energies of the cyclopropane ring and activation energy of ring-opening calculated by molecular orbital methods may explain the selectivity in the cleavage of the cyclopropane ring, and the degree of double ring-opening. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2501–2512, 1997     

Strontium‐based initiator system for ring‐opening polymerization of cyclic esters

An amino isopropoxyl strontium (Sr‐PO) initiator, which was prepared by the reaction of propylene oxide with liquid strontium ammoniate solution, was used to carry out the ring‐opening polymerization (ROP) of cyclic esters to obtain aliphatic polyesters, such as poly(ε‐caprolactone) (PCL) and poly(L ‐lactide) (PLLA). The Sr‐PO initiator demonstrated an effective initiating activity for the ROP of ε‐caprolactone (ε‐CL) and L‐lactide (LLA) under mild conditions and adjusted the molecular weight by the ratio of monomer to Sr‐PO initiator. Block copolymer PCL‐b‐PLLA was prepared by sequential polymerization of ε‐CL and LLA, which was demonstrated by ¹H NMR, ¹³C NMR, and gel permeation chromatography. The chemical structure of Sr‐PO initiator was confirmed by elemental analysis of Sr and N, ¹H NMR analysis of the end groups in ε‐CL oligomer, and Fourier transform infrared (FTIR) spectroscopy. The end groups of PCL were hydroxyl and isopropoxycarbonyl, and FTIR spectroscopy showed the coordination between Sr‐PO initiator and model monomer γ‐butyrolactone. These experimental facts indicated that the ROP of cyclic esters followed a coordination‐insertion mechanism, and cyclic esters exclusively inserted into the Sr–O bond. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1934–1941, 2003     

Phosphido‐diphosphine pincer aluminum complexes as catalysts for ring opening polymerization of cyclic esters

New aluminum alkyl complexes, supported by o‐phenylene‐derived phosphido diphosphine pro‐ligands [Ph‐PPP]‐H and [ⁱPr‐PPP]‐H ([Ph‐PPP]‐H = bis(2‐diphenylphosphinophenyl)phosphine; [ⁱPr‐PPP]‐H = bis(2‐diisopropylphosphinophenyl)phosphine) are reported. Compounds [Ph‐PPP]AlMe₂ ( 1 ), [ⁱPr‐PPP]AlMe₂ ( 2 ), and [Ph‐PPP]AlⁱBu₂ ( 3 ) have been synthesized by reaction of the pro‐ligand with the appropriate trialkyl aluminum precursor and have been characterized by ¹H, ¹³C and ³¹P NMR spectroscopy. The solution NMR data and theoretical calculations suggest for all complexes trigonal bipyramidal structures with C_2v symmetry in which the phosphido diphosphine ligand acts as a κ³ coordinated ligand. All complexes promote the ring‐opening polymerization of ε‐caprolactone, L‐ and rac‐lactide. Polyesters with controlled molecular parameters (M_n, end groups) and low polydispersities are obtained. Upon addition of isopropanol, efficient binary catalytic systems for the immortal ring‐opening polymerization of the cyclic esters are produced. Preliminary investigations show the ability of these complexes to promote copolymerization of l ‐lactide and ?‐caprolactone to achieve copolymers whose microstructures are depending on the structure of the catalyst. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 49–60     

Synthesis and ring‐opening polymerization of macrocyclic (arylene thioether ketone) oligomers

Macrocyclic (arylene thioether ketone) oligomers together with a linear poly(phenylene sulfide ketone) oligomer were synthesized by a one‐step reaction. The macrocycles and linear oligomer were fully characterized by ¹³C‐NMR, H‐NMR, matrix assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS), differential scanning calorimetry (DSC) and FT‐IR. Uncatalyzed, simultaneously ring‐opening polymerization (ROP) of the macrocycles and the mixture of macrocycles and linear oligomer were carried out under dynamic heating conditions. The ROP temperature of the macrocycles decreased upon mixing it with the linear oligomer. The ROP conditions and mechanism were investigated and discussed. The macrocycles and their mixture show potential applications in high temperature adhesives and sealants. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of various end‐functionalized polyesters by controlled/living ring‐opening polymerization of lactones using pentafluorophenylbis(triflyl)methane

The ring‐opening polymerizations (ROPs) of ε‐caprolactone (ε‐CL) and δ‐valerolactone (δ‐VL) with pentafluorophenylbis(triflyl)methane (C₆F₅CHTf₂) as the organocatalyst and alcohol initiators were carried out. For the ROP using 3‐phenyl‐1‐propanol (PPA) as the initiator in CH₂Cl₂ at room temperature with the [ε‐CL or δ‐VL]₀/[PPA]₀/[C₆F₅CHTf₂] ratio of 50/1/0.1, the polymerization homogeneously proceeded to afford poly(ε‐caprolactone) (PCL) and poly(δ‐valerolactone) (PVL) having narrow polydispersity indices. The molecular weights of the obtained polymers determined from ¹H NMR spectra showed good agreement with those estimated from the initial ratio of [ε‐CL or δ‐VL]₀/[PPA]₀ and monomer conversions. The ¹H NMR, size exclusion chromatography, and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry measurements strongly indicated that PCL and PVL possessed the 3‐phenylpropoxy group as the α‐chain‐end and the hydroxy group as the ω‐chain‐end. In addition, the controlled/living nature for the C₆F₅CHTf₂‐catalyzed ROP of lactones was confirmed by kinetic and chain‐extension experiments. The block copolymerization of PCL and PVL successfully proceeded to afford PCL‐b‐PVL and PVL‐b‐PCL. In addition, various end‐functionalized PCLs and PVLs with narrow molecular weight distributions were synthesized by the ROP of ε‐CL and δ‐VL using functional initiators, such as 6‐azido‐1‐hexanol, 2‐hydroxyethyl methacrylate, propargyl alcohol, N‐(2‐hydroxyethyl)maleimide, 4‐vinylbenzyl alcohol, 5‐hexen‐1‐ol, and 5‐norbornene‐2‐methanol. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of pH‐sensitive star‐shaped aliphatic polyesters as precursors of polymersomes

This article reports on the synthesis of a new pH‐sensitive amphiphilic A₂B mikto‐arm star‐shaped aliphatic copolyester [with A = poly(ε‐caprolactone) and B = tertiary amine‐bearing poly(ε‐caprolactone)] with two hydrophobic arms and one hydrophilic arm when protonated at pH = 5.5. First, the ring‐opening polymerization of ε‐caprolactone (εCL) was initiated by an aliphatic diol substituted by an alkyne. The copper(I) catalyzed azide‐alkyne cycloaddition (CuAAC) was use to convert the alkyne into a hydroxyl group prone to initiate the ring‐opening copolymerization of γ‐bromo‐ε‐caprolactone (γBrεCL) and εCL. After the substitution of the bromide atoms into azide functions, the N,N‐dimethylprop‐2‐yn‐1‐amine was grafted onto the azide bearing PCL arm by CuAAC, with the purpose to make the B arm hydrophilic at low pH. The precursors of the A₂B copolymers were characterized by ¹H NMR, SEC, and MALDI‐TOF. As expected, the A₂B copolyester was soluble into water at pH = 5. The formation of polymersomes in water at pH 5 was assessed by DLS and TEM analyses. The effects of the architecture and the molecular weight of the A₂B copolymers on the formation of polymersomes were investigated. Moreover, the versatility of our approach was demonstrated by the synthesis of an AB₂ star‐shaped copolyester. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Chemical preparation and characterization of new biodegradable aliphatic polyesters end‐capped with diverse steroidal moieties

Novel metal complexes with a single catalytic site and less transesterification seem to provide alternative efficient synthetic approaches to preparing new biodegradable and biologically responsive materials with well‐defined structures. In this study, we rationally designed a new category of aluminum metal complexes bearing a bulky Salen ligand and diverse steroidal alkoxy moieties to synthesize novel biodegradable aliphatic polyesters end‐capped with steroidal building blocks. At first, three new aluminum metal complexes ( 9 – 11 ) were synthesized with good yields of 80–90%, bearing cholesterol and diosgenin derivatives as functional alkoxy moieties. By means of nuclear magnetic resonance (NMR) spectrometry, matrix‐assisted laser desorption/ionization Fourier transform mass spectrometry (MALDI–FTMS), and Fourier transform infrared spectrometry, the molecular structures of 9 – 11 were characterized. Furthermore, new biodegradable aliphatic polyesters, poly(ε‐caprolactone) and poly(δ‐valerolactone) end‐capped with diverse steroidal moieties, were synthesized through the ring‐opening polymerization of ε‐caprolactone and δ‐valerolactone catalyzed by these new metal complexes under 100 °C in toluene, and they were also characterized by gel permeation chromatography, NMR, MALDI–FTMS, differential scanning calorimetry, and thermogravimetric analysis. Very narrow molecular weight distributions were revealed for these new polymer products, and their thermal crystallization and stability strongly depended on the degree of polymerization of the polyester building blocks and the distinct steroidal moieties. Because of the nature of the steroidal moieties, these biodegradable polymers may pave a path to new possibilities as potential biomaterials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2045–2058, 2006     

Synthesis of block and end‐functionalized polyesters by triflimide‐catalyzed ring‐opening polymerization of ε‐caprolactone, 1,5‐dioxepan‐2‐one,and rac‐lactide

The ring‐opening polymerization (ROP) of cyclic esters, such as ε‐caprolactone, 1,5‐dioxepan‐2‐one, and racemic lactide using the combination of 3‐phenyl‐1‐propanol as the initiator and triflimide (HNTf₂) as the catalyst at room temperature with the [monomer]₀/[initiator]₀ ratio of 50/1 was investigated. The polymerizations homogeneously proceeded to afford poly(ε‐caprolactone) (PCL), poly(1,5‐dioxepan‐2‐one) (PDXO), and polylactide (PLA) with controlled molecular weights and narrow polydispersity indices. The molecular weight determined from an ¹H NMR analysis (PCL, M_n,NMR = 5380; PDXO, M_n,NMR = 5820; PLA, M_n,NMR = 6490) showed good agreement with the calculated values. The ¹H NMR and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry analyses strongly indicated that the obtained compounds were the desired polyesters. The kinetic measurements confirmed the controlled/living nature for the HNTf₂‐catalyzed ROP of cyclic esters. A series of functional alcohols, such as propargyl alcohol, 6‐azido‐1‐hexanol, N‐(2‐hydroxyethyl)maleimide, 5‐hexen‐1‐ol, and 2‐hydroxyethyl methacrylate, successfully produced end‐functionalized polyesters. In addition, poly(ethylene glycol)‐block‐polyester, poly(δ‐valerolactone)‐block‐poly(ε‐caprolactone), and poly(ε‐caprolactone)‐block‐polylactide were synthesized using the HNTf₂‐catalyzed ROP. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2455–2463     

Lipase-catalyzed selective transformation of polycaprolactone into cyclic dicaprolactone and its repolymerization in supercritical carbon dioxide

The lipase-catalyzed selective transformation of poly(ε-caprolactone) (PCL) into dicaprolactone (DCL: 1,8-dioxacyclotetradecane-2,9-dione) and the repolymerization of DCL in supercritical carbon dioxide (scCO₂) were carried out for the establishment of a sustainable green polymer chemistry for PCL. PCL with a number-average molecular weight of M _n = 110 000 was selectively transformed into repolymerizable cyclic DCL in 90% yield using immobilized Candida antarctica lipase (lipase CA) in scCO₂ fluid by compression to 18 MPa in the presence of a small amount of water at 40 °C. The DCL obtained such was readily polymerized by lipase CA in scCO₂ to produce a PCL with an M _n of 33 000 after 6 h.

Concept of sustainable chemical recycling of PCL using an enzyme.     

Novel biodegradable copolyesters containing blocks of poly(3-hydroxyoctanoate) and poly(epsilon-caprolactone): synthesis and characterization

Novel biodegradable polyester block copolymers have been synthesized by using well-defined poly(3-hydroxyoctanoate) (PHO) oligomers having a hydroxyl end group and an ester end group with M(n) values of 800, 2,500, 5,300, 8,000, or 20,000 as an elastomeric soft segment and poly(epsilon-caprolactone) as a more crystalline segment. These PHO oligomers prepared by methanolysis were subjected to block copolymerization with epsilon-caprolactone. The chemical structure of the copolymers was confirmed by (1)H NMR and (13)C NMR spectroscopy. All the copolyesters are semi-crystalline and two T(g) were observed by differential scanning calorimetry when the molecular weight of the PHO block is about 20,000.     

Significant enhancement of catalytic properties in mononuclear yttrium complexes by nitrophenolate‐type ligands: Synthesis,structure, and catalysis for lactide polymerization

The syntheses, structures, and catalytic properties for lactones polymerization of eight novel yttrium complexes containing an amine‐bis(benzotriazole phenolate) ( ^C1NN BiBTP ) ligand are reported. A series of nitrophenolate (NP)‐type of ligands possessing R substituents with variable electronic properties (R = NO₂, Cl, H, CH₃) on ortho and/or para position attached to the phenolate rings have been selected and further reacted with ^C1NN BiBTP ‐H₂ proligand and YCl₃·6H₂O. Two series of complexes, [Y( ^C1NN BiBTP )(TNP)(MeOH)₂] ( 3 ), [Y( ^C1NN BiBTP )(2,4‐DNP)(MeOH)₂] ( 4 ) and [Y( ^C1NN BiBTP )(2,5‐DNP)(MeOH)₂] ( 5 ) with two MeOH molecules as initiators as well as [Y( ^C1NN BiBTP ‐H)(CNP)₂] ( 6 ), [Y( ^C1NN BiBTP ‐H)(2‐NP)₂] ( 7 ) and [Y( ^C1NN BiBTP ‐H)(MNP)₂] ( 8 ) with two NP derivatives, were synthesized. Their ring‐opening polymerizations of L‐ lactide (L‐ LA) were investigated for all complexes in order to further understand the correlations between the inductive effect of substitutions and catalytic properties. Particularly, the activity and controllability of yttrium complexes 3 and 5 were improved dramatically comparing with the literature complex with the similar coordination environment, [Y( ^C1NN BiBTP )(NO₃)(MeOH)₂], which can be a successful example to enhance the catalytic properties by exchanging coordinate molecules. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2038–2047     

Tetrakis Sn(IV) alkoxides as novel initiators for living ring‐opening polymerization of lactides

The use of tetrakis Sn(IV) alkoxides as highly active initiators for the ring‐opening polymerization of D ,L ‐lactide is reported. The activities of prepared Sn(IV) tetra‐2‐methyl‐2‐butoxide, Sn(IV) tetra‐iso‐propoxide, and Sn(IV) tetra‐ethoxide were compared to a well‐known ring‐opening polymerization initiator system, Sn(II) octoate activated with n‐butanol. All polymerizations were conducted at 75 °C in toluene. The activities of tetrakis Sn(IV) alkoxides grew in order of increasing steric hindrance, and the bulky Sn(IV) alkoxides showed higher activity than the Sn(II) octoate/butanol system. The living character of the polymerization was demonstrated in homopolymerization of D ,L ‐lactide and in block copolymerization of L ‐lactide with ?‐caprolactone. ¹H, ¹³C, and ¹¹⁹Sn NMR were used to characterize the prepared Sn(IV) alkoxides and the polymer microstructure, and size exclusion chromatography was used to determine the molar masses as well as the molar‐mass distributions of the polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1901–1911, 2004