Design of composite films and ultrathin membranes of interpolymer complexes

The formation of stoichiometric interpolymer complexes (IPCs) between the poly(vinyl ether) of ethyleneglycol and the copolymer of acrylic acid–butyl vinyl ether, between copolymers of vinyl ether of ethyleneglycol–butyl vinyl ether, and the copolymer of acrylic acid–vinylbutyl ether is demonstrated by conductimetric, potentiometric, viscometric and spectroturbidimetric methods in aqueous solution. The swelling/deswelling behavior of composite films derived from the IPC has been studied in water, alcohol and water–alcohol mixtures, depending on various factors. The formation of polyelectrolyte complexes (PECs) between the copolymer of acrylic acid–vinyl butyl ether and poly(vinyl ether of monoethanolamine) on a dimeric interface of water–butanol has been studied by the potentiometric method. The kinetics of PEC formation on a dimeric interface was measured and the activation energy of this process was calculated. Copyright © 2000 John Wiley & Sons, Ltd.     

Solvent effects on the formation of nanoparticles and multilayered coatings based on hydrogen-bonded interpolymer complexes of poly(acrylic acid) with homo- and copolymers of N-vinyl pyrrolidone

The formation of hydrogen-bonded interpolymer complexes between poly(acrylic acid) and poly(N-vinyl pyrrolidone) as well as amphiphilic copolymers of N-vinyl pyrrolidone with vinyl propyl ether has been studied in aqueous and organic solutions. It was demonstrated that introduction of vinyl propyl ether units into the macromolecules of the nonionic polymer enhances their ability to form complexes in aqueous solutions due to more significant contribution of hydrophobic effects. The complexation was found to be a multistage process that involves the formation of primary polycomplex particles, which further aggregate to form spherical nanoparticles. Depending on the environmental factors (pH, solvent nature), these nanoparticles may either form stable colloidal solutions or undergo further aggregation, resulting in precipitation of interpolymer complexes. In organic solvents, the intensity of complex formation increases in the following order: methanol < ethanol < isopropanol < dioxane. The multilayered coatings were developed using layer-by-layer deposition of interpolymer complexes on glass surfaces. It was demonstrated that the solvent nature affects the efficiency of coating deposition.     

Novel temperature‐responsive water‐soluble copolymers based on 2‐hydroxyethylacrylate and vinyl butyl ether and their interactions with poly(carboxylic acids)

Novel water‐soluble amphiphilic copolymers have been synthesized by free radical copolymerization of 2‐hydroxyethylacrylate with vinyl butyl ether. In water these copolymers exhibit lower critical solution temperature, which depends on the content of hydrophobic vinyl butyl ether units. The interaction between these copolymers and poly(acrylic acid) or poly(methacrylic acid) in aqueous solutions results in formation of interpolymer complexes stabilized by hydrogen bonds and hydrophobic interactions. An increase in hydrophobicity of the copolymers leads to the enhancement of their complex formation ability with respect to poly(acrylic acid) and poly(methacrylic acid). Poly(methacrylic acid) forms stronger complexes with the copolymers when compared with poly(acrylic acid). The complexes exhibit dual sensitivity to pH‐ and temperature and this property may be easily adjusted regulating the strength of interaction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 195–204, 2006     

Complex formation of polyvinyl ether of diethylene glycol with polyacrylic acid II. Effect of molecular weight of polyacrylic acid and solvent nature

In the present work the complexation between polyvinyl ether of diethylene glycol and polyacrylic acid of different molecular weights has been studied in aqueous and isopropanol solutions. It was found that the polyacrylic acid with molecular weight 2000 does not form interpolymer complexes. The stability of polycomplexes in respect to addition of different solvents was evaluated. It was shown that depending on the nature of polymers the interpolymer complexes may be more or less stable in aqueous solutions than in organic ones.     

Stabilization of water/n‐hexane emulsions by amphiphilic copolymers based on vinyl ethers and their polycomplexes with poly(acrylic acid)

Amphiphilic random copolymers based on vinyl ether of ethylene glycol and vinyl butyl ether as well as their polycomplexes with poly(acrylic acid) were studied as polymeric reagents for the stabilization of water/n‐hexane emulsions. The emulsion stability strongly depended on the content of vinyl butyl ether in the copolymers as well as their concentration in solution. The more hydrophobic copolymers stabilized emulsions more efficiently. An increase in the temperature and the addition of inorganic salts reduced the emulsion lifetime. The formation of interpolymer complexes between the copolymers and poly(acrylic acid) significantly influenced the stability of the emulsions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2625–2632, 2004     

Photophysical investigations of interpolymer interactions in solutions of a pyrene substituted poly(acrylic acid), poly(vinyl amine), poly(1-aminoacrylic acid), and poly(1-acetylaminoacrylic acid)

Photophysical properties of the pyrene chromophore covalently bound to poly(acrylic acid) were used to investigate the interactions of a pyrene substituted poly(acrylic acid) (1) with poly(vinyl amine hydrochloride) (PVAm), poly(1-aminoacrylic acid) (PDA), and poly(1-acetylaminoacrylic acid) (PADA) in aqueous solutions. A number of photophysical parameters were obtained from fluorescence emission and excitation spectra, the deconvolution of decay curves for pyrene monomer, and excited state complex fluorescence and the quenching of pyrene monomer fluorescence by nitromethane in polymer solutions. These photophysical parameters were considered to reflect the inter- and intrapolymer interactions in solutions of 1 , PVAm, PDA, and PADA. The formation of interpolymer complexes between 1 and PVAm was noticed at low (< 4) as well as high (> 8) values, whereas PDA and 1 formed interpolymer complexes at low pH only. No interpolymer complex formation was detected in solutions of 1 and PADA under low or high pH conditions. The structures of interpolymer complexes formed between 1 and PVAm under low and high pH conditions were found to be determined by the conformation of 1 . There were significant differences in the interpolymer interactions of 1 and PDA in comparison to those of 1 and PVAm; in particular, the fluorescence from the excited state complex was enhanced in solutions of 1 and PVAm but quenched in solutions of 1 and PDA. The investigations of terpolymer solutions of 1 , PVAm, and PADA indicated that the nature of interpolymer complexes formed in terpolymer solutions was determined by Coulombic interactions of the amino and carboxylic group containing polymers.     

pH effects on the complexation, miscibility and radiation-induced crosslinking in poly(acrylic acid)-poly(vinyl alcohol) blends

The effect of pH on the complexation of poly(acrylic acid) with poly(vinyl alcohol) in aqueous solution, the miscibility of these polymers in the solid state and the possibility for crosslinking the blends using gamma radiation has been studied. It is demonstrated that the complexation ability of poly(vinyl alcohol) with respect to poly(acrylic acid) is relatively low in comparison with some other synthetic non-ionic polymers. The precipitation of interpolymer complexes was observed below the critical pH of complexation (pH(crit1)), which characterizes the transition between a compact hydrophobic polycomplex and an extended hydrophilic interpolymer associate. Films prepared by casting from aqueous solutions at different pH values exhibited a transition from miscibility to immiscibility at a certain critical pH, pH(crit2), above which hydrogen bonding is prevented. It is shown here that gamma radiation crosslinking of solid blends is efficient and only results in the formation of hydrogel films for blends prepared between pH(crit1) and pH(crit2). The yield of the gel fraction and the swelling properties of the films depended on the absorbed radiation dose and the polymer ratio. [Diagram: see text] SEM image of an equimolar PAA-PVA blend cast from a pH 4.6 solution.     

Mutual enhancement of the complexing properties of components in tertiary systems containing copper nanoparticles, poly(acrylic acid), and poly(ethylene glycol)

It is shown that nonstoichiometric interpolymer complexes composed of high-molecular-mass poly( acrylic acid) and PEG of various molecular masses are more efficient stabilizers of copper sols than each component of the complex taken separately. This conclusion is based on comparison of dimensions of copper nanoparticles in sols formed via reduction of copper(II) ions in solutions of poly (acrylic acid), PEG, and their blends and on the enhanced stability of sols protected by the interpolymer complex against aggregation and oxidation of metal particles. Much shorter PEG chains than those necessary for formation of corresponding interpolymer complexes in the absence of nanoparticles can be involved in formation of tertiary complexes including copper nanoparticles, poly(acrylic acid), and PEG. On the basis of the experimental data, it is inferred that the mutual enhancement of the complexing behavior of components occurs in tertiary complexes containing copper nanoparticles and both polymers.     

Effect of copolymer composition on interpolymer complex formation of (co)poly(vinyl ether)s with poly(acrylic acid) in aqueous and organic solutions

The complex formation between vinyl ether of poly(ethylene glycol‐co‐vinyl butyl ether) with poly(acrylic acid) has been considered in aqueous and isopropanol solutions. The effect of copolymer composition on the complex formation process was clarified. It has been shown that the incorporation of hydrophobic fragments into macromolecules enhances the hydrophobic stabilization of polycomplexes in aqueous solutions. In organic media this effect disappears. The stability of polycomplexes formed both in aqueous and in organic solutions in respect to the addition of dimethylformamide has been studied.     

Fluorescence and viscometry study of complexation of poly(acrylic acid) with poly(acrylamide) and hydrolysed poly(acrylamide)

Interpolymer complexation of poly(acrylic acid) with poly(acrylamide) and hydrolysed poly(acrylamide) was studied by fluorescence spectroscopy and viscometry in dilute aqueous solutions. Changes in chain conformation and flexibility due to the interpolymer association are reflected in the intramolecular excimer fluorescence of pyrene groups covalently attached to the polymer chain. Both poly(acrylamide) and hydrolysed poly(acrylamide) form stable complexes with poly(acrylic acid) at low pH. The molecular weight of poly(acrylic acid) and solution properties such as pH and ionic strength were found to influence the stability and the structure of the complexes. In addition, the polymer solutions mixing time showed an effect on the mean stoichiometry of the complex. The intrinsic viscosity of the solutions of mixed polymers at low pH suggested a compact polymer structure for the complex.     

Hydrophilic films based on poly(acrylic acid)–poly(vinyl methyl ether) blends cross-linked by gamma-radiation

Hydrophilic polymeric films based on blends of poly(acrylic acid) and poly(vinyl methyl ether) (PVME) were prepared by casting technique and were cross-linked by gamma-radiation. The films are soft and elastic in a dry state and form hydrogels upon immersion in water. Effect of absorbed dose on the gel fraction as well as on the swelling of the films in aqueous solutions of different pH is studied. It was found that addition of lower molecular weight PVME decreases the gelation dose, which is likely related to a decrease in glass transition temperature of the blends. In acidic media the films have low swelling degree because of suppression of carboxylic groups ionisation and formation of additional physical cross-links via interpolymer hydrogen bonding.     

Interpolymer complexes of poly(acrylic acid) with poly(2-hydroxyethyl acrylate) in aqueous solutions

Complexes formed from poly(acrylic acid) and poly(2-hydroxyethyl acrylate) were studied in aqueous solutions by viscometric, turbidimetric, FTIR spectroscopic, and thermogravimetric analysis methods. The formation of interpolymer complexes stabilized by hydrogen bonds was observed. It was found that the compositions of these interpolymer complexes are strongly dependent on the concentration of polymers, the order of mixing the solutions, and the pH. It was demonstrated that the complexation ability of poly(2-hydroxyethyl acrylate) is relatively low compared to other known nonionic water-soluble polymers. However, it can be significantly increased via hydrophobic modification of the poly(acrylic acid) using cetyl pyridinium bromide.     

Composite proton-conducting membranes based on poly(ethylene glycol vinyl glycidyl ether)

Composite proton-conducting membranes in the form of interpolymer films are prepared in an aqueous medium from sulfo-acid-modified poly(ethylene glycol vinyl glycidyl ether) and poly(vinyl alcohol). The initial poly(hydroxysulfo acid) is synthesized through the radical polymerization of ethylene glycol vinyl glycidyl ether followed by modification with sodium sulfite via epoxy groups and treatment with a cationite in the H form. The proton-conducting membranes feature improved thermal stability (200–250°C), a breaking strength of 1.0–8.9 MPa, elasticity (a relative elongation at break of 1.0–8.2%), chemical resistance, and specific proton conductivity attaining 10^?1 S/cm after doping with orthophosphoric acid.     

Water-soluble polypyrroles by matrix polymerization: Interpolymer complexes

A new class of water-soluble polypyrroles (PPy) has been developed. This was accomplished by oxidative matrix polymerization of pyrrole (Py) monomer with Ce(IV) in the presence of poly(acrylic acid) (PAA), poly(vinyl pyrrolidone) (PVP), and copolymers (CP) of vinyl pyrrolidone(VP) with acrylic acid (AA) [VP/AA; 25/75 (CP₁), 50/50 (CP₂), 75/25 (CP₃)]. The soluble and insoluble interpolymer complexes were observed according to the nature (and conformation) of polymers in mixture, the ratio of components, and the pH of solutions. The role of PAA, PVP, CP, Py, and Ce(IV) concentrations, the order of component addition, and the pH of the solutions were investigated. The evidence and structural reasons for the formation of soluble interpolymer complexes of PPy with different polymers are discussed. It is proposed that the compactization of the polymer matrix as well as the disturbance of the regularity of reactive groups on the polymer chain decreases the possibility of formation of soluble interpolymer complexes. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1255–1263, 1997     

PH effects in the complex formation and blending of poly(acrylic acid) with poly(ethylene oxide)

The effect of pH on the complex formation between poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO) has been studied in aqueous solutions by turbidimetric and fluorescent methods. It was shown that the formation of insoluble interpolymer complexes is observed below a certain critical pH of complexation (pH(crit1)). The formation of hydrophilic interpolymer associates is possible above pH(crit1) and below a certain pH(crit2). The effects of polymer concentrations in solution and PEO molecular weight as well as inorganic salt addition on these critical pH values were studied. The polymeric films based on blends of PAA and PEO were prepared by casting from aqueous solutions with different pHs. These films were characterized by light transmittance measurements and differential scanning calorimetry. The existence of the pH value above which the polymers form an immiscible blend was demonstrated. The transitions between the interpolymer complex, miscible blend, and immiscible blend caused by pH changes are discussed. The recommendations for preparation of homogeneous miscible films based on compositions of poly(carboxylic acids) and various nonionic water-soluble polymers are presented.     

Specific features of nonstoichiometric interpolymer complexes of poly(acrylic acid) and poly(ethylene glycol) as protectors of copper nanoparticles in aqueous sols

Advantages of interpolymer complexes for use as amphiphilic protectors of nanoparticles during the formation and stabilization of sols are considered. The effects of the ratio of poly(acrylic acid) and poly(ethylene glycol) and the molecular mass of poly(ethylene glycol) on the mean size and size distribution of copper nanoparticles in sols formed via the reduction of divalent copper ions in mixed aqueous solutions of these polymers are investigated. It is shown that sols of metal nanoparticles with small sizes and narrow size distributions are formed even when poly(ethylene glycols) with chain lengths below the “critical” chain length and a small PEG-to-PAA base-molar ratio are used. This is evidence for efficient protection of the formed copper nanoparticles by the interpolymer complex PEG-PAA under conditions of its instability and for self-organization of oligomeric PEG chains in complex macromolecular shields of nanoparticles.     

The influence of amphiphilic polymers on the photocatalytic activity of water-soluble porphyrin photosensitizers

The influence of amphiphilic polymers polyvinylpyrrolidone, poly(ethylene oxide), poly(vinyl alcohol), and pluronic F127 (propylene oxide-ethylene oxide triblock copolymer) on the catalytic activity of a number of water-soluble metal-free porphyrin photosensitizers was studied in the reaction of tryptophan photooxidation in aqueous solution. The introduction of the specified polymers was found to enhance the activity of carbon-substituted tetrafluorophenylporpyrin, photoditazine, and dimegin. It was ascertained that introduction of polyvinylpyrrolidone had the strongest effect on the increase in the photooxidation process rate; the change in the activity of porphyrins was 30–70%. The introduction of poly(ethylene oxide), poly(vinyl alcohol), and pluronic F127 was shown to enhance the rate of the process by 10–40%. It was concluded that this polymer effect was connected with the dissociation of aggregates, in which form porphyrin molecules were present in aqueous solutions, as indicated by an increase in fluorescence intensity of porphyrins. The introduction of polymers resulted in a bathochromic shift of the fluorescence bands for all porphyrins, which accounted for the formation of complexes of porphyrin sensitizers with the polymers.     

Hydrogen-bonding-driven self-assembly of PEGylated organosilica nanoparticles with poly(acrylic acid) in aqueous solutions and in layer-by-layer deposition at solid surfaces

PEGylated organosilica nanoparticles have been synthesized through self-condensation of (3-mercaptopropyl)trimethoxysilane in dimethyl sulfoxide into thiolated nanoparticles with their subsequent reaction with methoxypoly(ethylene glycol) maleimide. The PEGylated nanoparticles showed excellent colloidal stability over a wide range of pH in contrast to the parent thiolated nanoparticles, which have a tendency to aggregate irreversibly under acidic conditions (pH < 3.0). Due to the presence of a poly(ethylene glycol)-based corona, the PEGylated nanoparticles are capable of forming hydrogen-bonded interpolymer complexes with poly(acrylic acid) in aqueous solutions under acidic conditions, resulting in larger aggregates. The use of hydrogen-bonding interactions allows more efficient attachment of the nanoparticles to surfaces. The alternating deposition of PEGylated nanoparticles and poly(acrylic acid) on silicon wafer surfaces in a layer-by-layer fashion leads to multilayered coatings. The self-assembly of PEGylated nanoparticles with poly(acrylic acid) in aqueous solutions and at solid surfaces was compared to the behavior of linear poly(ethylene glycol). The nanoparticle system creates thicker layers than the poly(ethylene glycol), and a thicker layer is obtained on a poly(acrylic acid) surface than on a silica surface, because of the effects of hydrogen bonding. Some implications of these hydrogen-bonding-driven interactions between PEGylated nanoparticles and poly(acrylic acid) for pharmaceutical formulations are discussed.     

Equilibrium study of polymer–polymer complexation of poly(methacrylic acid) and poly(acrylic acid) with complementary polymers through cooperative hydrogen bonding

The degree of linkage, θ, defined as the ratio of the binding groups to the total of potentially interacting groups and the stability constant K of the polymer–polymer complexes in the systems poly(methacrylic acid)–poly(ethylene glycol), poly(acrylic acid)–poly(ethylene glycol), and poly-(methacrylic acid)–poly(vinyl pyrrolidone) in aqueous and aqueous alcohol media were determined as a function of temperature by potentiometric titration. It was found that θ and K are strongly dependent on chain length, temperature, and medium and that hydrophobic interaction is a significant factor in the stabilization of the complexes. The enthalpy and entropy changes and the cooperativeness parameter of the systems were calculated. A mechanism for the complexation in terms of cooperative interaction was proposed.     

Interpolymer complex formation of some nonionogenic polymers with linear and crosslinked polyacrylic acid

The formation of interpolymer complexes on the surface of crosslinked poly (acrylic acid) with some nonionogenic polymers is compared with the complex formation in analogous linear polymer systems. The behavior of these systems is compared with that of complexes of two oppositely charged polyelectrolytes. The concentration redistribution of the linear polymer in the system polyelectrolyte network-polymer solution and the degree of swelling of this network in these solutions were determined. © 1994 John Wiley & Sons, Inc.