Remarkable birefringence in a TiO2-SiO2 composite film with an aligned mesoporous structure

Mesoporous titania-silica composite films with highly aligned cylindrical pores are prepared by the sol-gel method using a substrate with structural anisotropy. The strong alignment effect of a rubbing-treated polyimide film on a substrate provides a narrow alignment distribution in the plane of the film regardless of the fast condensation rate of titania precursors. The collapse of the mesostructure upon the surfactant removal is effectively suppressed by the reinforcement of the pore walls with silica by exposing the as-deposited film to a vapor of a silicon alkoxide. The existence of a silica layer on the titania pore wall is proved from the distributions of Ti and Si estimated by the elemental analysis in high resolution electron microscopy. The obtained mesoporous titania-silica composite film exhibits a remarkable birefringence reflecting the highly anisotropic mesoporous structure and the high refractive index of titania that forms the pore wall. The Δn value estimated from the optical retardation and the film thickness is larger than 0.06, which cannot be achieved with the conventional mesoporous silica films with uniaxially aligned mesoporous structure even though the alignment of the pores in the films is perfect. These inorganic films with mesoscopic structural anisotropy will find many applications in the field of optics as phase plates with high thermal/chemical/mechanical stabilities.     

Synthesis of 3D pore mesostructured silica films by vapor infiltration of tetraethoxysilane

Nonionic alkyl poly(oxyethylene) surfactants (Brij 56) films on a silicon substrate were treated with a tetraethoxysilane (TEOS) vapor. Mesostructured silica films were formed through a nano-phase transition under the infiltration of TEOS into the surfactant films. It was found that the calcined film had a 3D pore structure from the field emission scanning electron microscope (FE-SEM) observations in a different orientation. Grazing angle of incidence small angle X-ray scattering (GISAXS) measurement results showed that the symmetry of the film was an Fmmm space group oriented with the (010) plane parallel to the surface. The ordered structure of the films showed higher thermal stability than the films prepared by a conventional solvent-evaporation method.     

Incorporation of organic groups within the channel wall of spin-on mesostructured silica films by a vapor infiltration technique

Organically functionalized mesoporous silica films have been prepared by a novel synthetic procedure that involves spin-coating of mesostructured silica films and a vapor infiltration (VI) technique, using organosiloxanes, before the removal of surfactant. The VI-treated mesostructured films were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and a field emission scanning electron microscope (FE-SEM). Nitrogen adsorption/desorption measurements were performed using films attached with a silicon substrate. The XRD and FE-SEM measurements show that the mesochannel wall, densified and modified with organosilyl groups by the VI treatment, hardly contracts under calcination. FE-SEM observations for the films' cross section support the view that organosiloxane vapor is not deposited on the surface of the film. These results show that organosiloxane molecules penetrate the film and are selectively incorporated into the silica wall. Thus, hydrophobic mesoporous silica films can be synthesized without a reduction in pore size, a result that cannot be attained by conventional grafting and co-condensation methods. The excellent high porosity and hydrophobicity of the mesostructured composite films may be of advantage for next-generation low-k dielectric films.     

Nanoporous thin films from ionically connected diblock copolymers

An ionically connected polystyrene-block-poly(ethylene oxide) diblock copolymer (PS^?+PEO) has been prepared by blending a PEO block functionalized by a dimethylamino group at one extremity with a sulfonic acid terminated PS block. Proton transfer occurs from the sulfonic acid to the dimethylamino group, resulting in the formation of an ion pair acting as a junction between the two polymer blocks. This copolymer was further used to prepare thin films with a cylindrical morphology consisting of PEO cylinders embedded in a PS matrix and oriented perpendicularly to the film surface. Nanoporous thin films with sulfonate groups on the pore walls have been finally obtained after solvent extraction of the PEO microphases. The presence of those sulfonate groups was evidenced by grafting a positively charged fluorescent dye on the pore walls.     

Functionalized nanoporous thin films from metallo-supramolecular diblock copolymers

A polystyrene-[Ni(2+)]-poly(ethylene oxide) metallo-supramolecular block copolymer (PS-[Ni(2+)]-PEO), where -[ is a terpyridine, is used to create nanoporous thin films with free terpyridine ligands homogenously distributed on the pore walls. The PS-[Ni(2+)]-PEO block copolymer is synthesized by a two step assembly process, and is then self-assembled into a thin film in order to obtain PEO cylinders oriented perpendicularly to the film surface. The supramolecular junction is opened by exposing the film to an excess of a competing ligand, and the free PEO block is then rinsed away by a selective solvent. The presence of the terpyridines on the pore walls is evidenced by fluorescence spectroscopy after formation of a fluorescent complex with an europium salt.     

Synthesis of FDU-1 silica with narrow pore size distribution and tailorable pore entrance size in the presence of sodium chloride

Ordered silicas with large (9-15 nm), uniform, cagelike mesopores were synthesized under acidic aqueous conditions from tetraethyl orthosilicate in the presence of sodium chloride using poly(ethylene oxide)-poly(butylene oxide)-poly(ethylene oxide) triblock copolymer B50-6600 (EO39BO47EO39, Dow Chemicals) as a supramolecular template. Except for the use of NaCl in our case, the synthesis mixture composition was the same as that originally reported by Zhao et al. for the synthesis of FDU-1 silica, which was later shown to exhibit a cubic close-packed (Fm3m) structure with stacking faults related to the occurrence of hexagonal close-packed stacking sequences. The copolymer-templated silicas were formed at room temperature and in most cases were subjected to the hydrothermal treatment at 373 or 393 K. The calcined materials were characterized using small-angle X-ray scattering (SAXS) and nitrogen and argon adsorption at 77 K. SAXS patterns were generally similar to those reported for FDU-1 silica, indicating the cubic close-packed (Fm3m) structure, but the presence of stacking faults characteristic of a hexagonal close-packed structure cannot be precluded. The addition of the salt was found to significantly narrow the pore size distributions and to improve the uniformity of entrances to the cagelike mesopores, whereas the pore diameter, specific surface area, and pore volume were similar (in most cases slightly lower) to those for FDU-1 silicas obtained in the absence of NaCl. The materials synthesized in the presence of NaCl also appeared to have better resolved SAXS patterns. The feasibility of tailoring the pore cage diameter (from approximately 9.5 to 14.5 nm) and pore entrance diameter (from below 4 to approximately 8 nm) simply by adjusting the hydrothermal treatment temperature and time was demonstrated, indicating that these simple and convenient ways of structural design of cagelike mesopores are operative in the case of syntheses in the presence of inorganic salts.     

Synthesis and luminescence properties of hybrid organic-inorganic transparent titania thin film activated by in-situ formed lanthanide complexes

Stable transparent titania thin films were fabricated at room temperature by combining thenoyltrifluoroacetone (TTFA)-modified titanium precursors with amphiphilic triblock poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO, P123) copolymers. The obtained transparent titania thin films were systematically investigated by IR spectroscopy, PL emission and excitation spectroscopy and transmission electron microscopy. IR spectroscopy indicates that TTFA coordinates the titanium center during the process of hydrolysis and condensation. Luminescence spectroscopy confirms the in-situ formation of lanthanide complexes in the transparent titania thin film. TEM image shows that the in-situ formed lanthanide complexes were homogeneously distributed throughout the whole thin film. The quantum yield and the number of water coordinated to lanthanide metal center have been theoretically determined based on the luminescence data.     

Adsorption properties of ordered mesoporous silicas synthesized in the presence of block copolymer Pluronic F127 under microwave irradiation

Ordered mesoporous silicas (OMSs) were prepared at different temperatures by using tetraethyl orthosilicate (TEOS) as a silica source, poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer (Pluronic F127) as a structure directing agent and sodium chloride as an additive under acidic conditions and microwave irradiation. The small angle X-ray diffraction patterns of these samples indicate the presence of ordered mesopores, while adsorption studies show that they possess high volumes of pores, bimodal pore size distributions and large pore sizes. There is an interesting change in the hysteresis loop of nitrogen adsorption isotherms with increasing temperature of hydrothermal treatment; a delayed desorption characteristic for cage-like mesostructures is observed for the OMS samples treated at 100 and 120?°C, while the hydrothermal treatment at 140 and 160?°C leads to the samples having hysteresis loops characteristic for channel-like materials.     

Highly-controlled grafting of mono and dicationic 4,4'-bipyridine derivatives on SBA-15 for potential application as adsorbent of CuCl(2) from ethanol solution

Ultra-large-pore FDU-12 (ULP-FDU-12) silica with face-centered cubic structure (Fm3m type) of spherical mesopores was synthesized using Pluronic F127 triblock copolymer (EO(106)PO(70)EO(106)) and ethylbenzene as a new micelle expander at initial temperature of 14 °C. Ethylbenzene was identified on the basis of its reported extent of solubilization in poly(ethylene oxide)-poly(propylene oxide)-type surfactant micelles, which was similar to that of xylene, the latter having been shown earlier to afford ULP-FDU-12. The unit-cell parameter of as-synthesized ULP-FDU-12 was 55 nm, which is similar to the highest value reported when xylenes (mixture of isomers) were used and larger than that achieved with trimethylbenzene. The unit-cell parameter of calcined ULP-FDU-12 reached 52 nm. For the obtained materials, the nominal pore cage diameter calculated from nitrogen adsorption reached 32 nm, whereas the actual pore cage diameter calculated using the geometrical relation was 36 nm. The pore entrance size was below 5 nm before the acid treatment, but was greatly enlarged as a result of the treatment. The sample prepared without hydrothermal treatment was converted to ordered closed-pore silica at as low as 400-450 °C. Our study confirms the ability to select micelle expanders on the basis of data on solubilization of compounds in micelle solutions.     

Thin films of functionalized amorphous silica for immunosensors application

Within the framework of the development of an optical immunosensor, the sol-gel process has been used to prepare a thin film of amorphous silica, deposited by spin coating on a gold-coated glass slide, and possessing chemically active functional groups (SH, NH₂...). After activation of the sol-gel film in aqueous buffers by a bifunctional coupling agent, biological molecules such as antibodies could be covalently bonded on or inside the sol-gel film. Therefore, the behavior in aqueous solutions of the functionalized silica thin films has been analysed by Surface Plasmon Resonance (SPR) and guided wave propagation. Results show a modification of the thickness and of the refractive index of the silica film. Pore size range has been deduced by the infiltration of different molecular weight dextran molecules diluted in water into the sol-gel material. Immunosassays have demonstrated biological activity of antibodies which are covalently linked to or entraped in the sol-gel film.     

Creation of high-refractive-index amorphous titanium oxide thin films from low-fractal-dimension polymeric precursors synthesized by a sol-gel technique with a hydrazine monohydrochloride catalyst

Amorphous titanium dioxide (TiO(2)) thin films exhibiting high refractive indices (n ≈ 2.1) and high transparency were fabricated by spin-coating titanium oxide liquid precursors having a weakly branched polymeric structure. The precursor solution was prepared from titanium tetra-n-butoxide (TTBO) via the catalytic sol-gel process with hydrazine monohydrochloride used as a salt catalyst, which serves as a conjugate acid-base pair catalyst. Our unique catalytic sol-gel technique accelerated the overall polycondensation reaction of partially hydrolyzed alkoxides, which facilitated the formation of liner polymer-like titanium oxide aggregates having a low fractal dimension of ca. (5)/(3), known as a characteristic of the so-called "expanded polymer chain". Such linear polymeric features are essential to the production of highly dense amorphous TiO(2) thin films; mutual interpenetration of the linear polymeric aggregates avoided the creation of void space that is often generated by the densification of high-fractal-dimension (particle-like) aggregates produced in a conventional sol-gel process. The mesh size of the titanium oxide polymers can be tuned either by water concentration or the reaction time, and the smaller mesh size in the liquid precursor led to a higher n value of the solid thin film, thanks to its higher local electron density. The reaction that required no addition of organic ligand to stabilize titanium alkoxides was advantageous to overcoming issues from organic residues such as coloration. The dense amorphous film structure suppressed light scattering loss owing to its extremely smooth surface and the absence of inhomogeneous grains or particles. Furthermore, the fabrication can be accomplished at a low heating temperature of <80 °C. Indeed, we successfully obtained a transparent film with a high refractive index of n = 2.064 (at λ = 633 nm) on a low-heat-resistance plastic, poly(methyl methacrylate), at 60 °C. The result offers an efficient route to high-refractive-index amorphous TiO(2) films as well as base materials for a wider range of applications.     

PET表面锐钛矿-板钛矿相TiO2薄膜的制备及表征

利用改进的溶胶-凝胶法在经表面改性的PET(聚对苯二甲酸乙二醇酯)表面制备得到TiO2薄膜. 利用X射线衍射(XRD)、原子力显微镜(AFM)、UV-Vis 透光率曲线、接触角测试仪等测试手段对TiO2样品的性能进行表征.结果表明, PET表面过渡层的引入有效地改善了有机基底与无机薄膜之间的界面相容性, 在其表面形成透明、均一、附着力良好且具有光催化活性的TiO2薄膜.通过控制实验过程, 在低温下成功制备了不同锐钛矿/板钛矿比的TiO2薄膜,同时发现适量板钛矿相的存在能有效提高薄膜的光致亲水性.     

Dynamic elasticity of triblock copolymer of poly(ethylene oxide) and poly(propylene oxide) on a water surface

Dilatational viscoelasticity of adsorbed and spread films of the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer at the air-water interface is studied by the capillary waves and oscillating barrier techniques. At the surface pressure below 10 mN/m, dynamic surface properties of these films coincide with those of poly(ethylene oxide). At higher surface pressures, the results obtained indicate the desorption of poly(propylene oxide) segments from the monolayer and their interaction with poly(ethylene oxide) segments in an aqueous phase. At a surface pressure close to 19 mN/m, the behavior of adsorbed and spread poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) films becomes different. The real part of dynamic surface elasticity of spread films tends toward its maximum value (20 mN/m) and, upon further compression, films begin to dissolve. At the same time, the surface elasticity of adsorbed films decreases nearly twofold upon the achievement of the maximum value that testifies the formation of looser structure of the surface layer.     

Silica-Titania Mesostructured Films

Mesostructured silica-titania mixed oxide films in which the titania is well accessible on the silicate pore wall have been synthesized by a ligand-assisted templating (LAT) approach in combination with sol-gel processing. Control over the different hydrolysis and condensation rates of silicon and titanium alkoxides was achieved by complexation of the titanium species to the poly(ethylene oxide) part of an amphiphilic surfactant molecule (Brij56®). This modified precursor was used as structure-directing agent in the formation of thin mesostructured films. The structure and composition of the resulting material was characterized by X-ray diffraction, UV-vis spectroscopy and transmission electron microscopy.     

Nano silver coated patterned silica thin film by sol–gel based soft lithography technique

We report the fabrication of nano silver coated patterned silica thin film by sol–gel based soft lithography technique. Initially, silica gel film on soda lime silica glass was prepared by dipping technique from a silica sol of moderate silica concentration. A PolydimethylSiloxane elastomeric stamp containing the negative replica of the patterns of commercially available compact disc was used for embossing the film and the embossed film was cured up to 450 °C in pure oxygen atmosphere for oxide film. Finally, a precursor solution of AgNO₃ in water containing polyvinyl alcohol as an organic binder was made and used for coating on the patterned silica film by dipping technique and cured the sample up to 450 °C in reducing gas atmosphere to obtain nano silver layer. The formation of only cubic silver (~4.0 nm) and both cubic silver (~5.2 nm) and silver oxide (~3.6 nm) crystallites at 350 and 450 °C film curing temperatures respectively were confirmed by XRD measurements. The % of nano silver metal and silver oxide were 75.4 and 24.6 respectively. The nano-structured surface feature was visualized by FESEM whereas AFM revealed the high fidelity grating structure of the films. Presence of both spherical and rectangular structure (aspect ratio, 2.37) of nano silver/silver oxide was confirmed by TEM. The films were also characterized by UV–Vis spectral study. The patterned film may find application in chemical sensor devices.     

Atomistic simulation of the formation of nanoporous silica films via molecular chemical vapor deposition on nonporous substrates

To distinguish thin deposited film characteristics clearly from the influence of substrate morphological properties, the growth mechanism and the macroscale and nanoscale properties of nanoporous SiO(2) films deposited on nonporous silica (SiO(2)) substrates from chemical precursors Si(OH)(4) and TEOS (tetraethoxysilane) via low-pressure chemical vapor deposition are the primary targets of this study. This work employs a kinetic Monte Carlo (KMC) simulation method coupled to the Metropolis Monte Carlo method to relax the strained silica structure. The influence of the deposition temperature (473, 673, and 873 K) on the properties of the SiO(x) layers is addressed via analysis of the film growth rates, density profiles of the deposited thin films, pore size distributions, carbon depth profiles (with respect to TEOS), and voidage analysis for layers of different thicknesses (8-18 nm). A comparison of simulation with experimental results is also carried out.     

Synthesis and characterization of ordered and disordered polycrystalline La(2)NiMnO(6) thin films by sol-gel

Polycrystalline La(2)NiMnO(6) thin films are prepared on Pt/Ti/SiO(2)/Si substrates by the sol-gel method. Through controlling the processing parameters, the cation ordering can be tuned. The disordered and ordered thin films exhibit distinct differences for crystal structures as well as properties. The crystal structure at room temperature characterized by X-ray diffraction and Raman spectra is suggested to be monoclinic (P2(1)/n) and orthorhombic (Pbnm) for the ordered and disordered thin films, respectively. The ferromagnetic-paramagnetic transition is 263 K and 60 K for the ordered and disordered samples respectively, whereas the saturation magnetic moment at 5 K is 4.9 μ(B) fu(-1) (fu = formula unit) and 0.9 μ(B) fu(-1). The dielectric constant as well as magnetodielectric effect is higher for the ordered La(2)NiMnO(6) thin films. The magnetodielectric effect for the ordered thin film is dominantly contributed to the intrinsic coupling of electric dipole ordering and fluctuations and magnetic ordering and fluctuations, while it is mainly contributed to Maxwell-Wagner (M-W) effects for the disordered thin film. The successful achievements of ordered and disordered polycrystalline La(2)NiMnO(6) thin films will provide an effective route to fabricate double-perovskite polycrystalline thin films by the sol-gel method.     

Influence of Sol-Gel Synthesis Parameters on the Microstructure of Particulate Silica Xerogels

The influence of key sol-gel synthesis parameters on the pore structure of microporous silica xerogels was investigated. The silica xerogels were prepared using an acid-catalyzed aqueous sol-gel process, with tetraethoxysilane (TEOS) as the silicon-containing precursor. At high H2O : TEOS ratios, sols synthesized at pH 2–3 yielded minimum values of mean micropore diameter and micropore volume. Analysis of the resulting Type I nitrogen adsorption isotherms and the equilibrium adsorption of N(C4F9)3 indicated micropore diameters for these xerogels of less than approximately 10 Å.Xerogel micropore volumes corresponding to sols prepared at pH 3 and an H2O : TEOS ratio of r = 83 were consistent with nearly close packing of silica spheres in the xerogel. Xerogel microstructure was only weakly dependent upon H2O : TEOS ratio during sol synthesis for r > 10. Xerogel micropore volume increased rapidly with sol aging time during an initial induction period of particle formation. However, the xerogel microstructure changed only slowly with time after this initial period, suggesting potential processing advantages for the particulate sol-gel route to porous silica materials.Surface adsorption properties of the silica xerogels were investigated at ambient temperature using N2, SF6, and CO2. CO2 adsorbed most strongly, SF6 also showed measurable adsorption, and N2 adsorption was nearly zero. These results were consistent with the surface transport of CO2, and to a lesser extent SF6, observed in gas permeation studies performed through thin membrane films cast from similarly prepared silica sols.     

Nanostructured latex films from poly(butyl methacrylate) latex cross-linked with poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) triblock macro-cross-linker

Biphasic polymer latexes were synthesized by a seeded swelling and polymerization method. The latexes were composed of a poly(butyl methacrylate) core and a poly(ethylene oxide) rich shell cross-linked with poly(ethylene oxide)-poly (propylene oxide)-poly(ethylene oxide) triblock diol diacrylate macro-cross-linker. Nanostructured films were obtained by annealing the biphasic polymer latexes at a temperature between the glass-transition temperatures of the core latex and the cross-linked poly(ethylene oxide) based shell. Atomic force microscope images of the latex film revealed that the poly(butyl methacrylate) core phase is confined in the poly(ethylene oxide)-rich continuous phase with the form of separate nanosized spheres.     

Thin silica films on Ru(0001): monolayer, bilayer and three-dimensional networks of [SiO4] tetrahedra

The atomic structure of thin silica films grown over a Ru(0001) substrate was studied by X-ray photoelectron spectroscopy, infrared reflection absorption spectroscopy, low energy electron diffraction, helium ion scattering spectroscopy, CO temperature programmed desorption, and scanning tunneling microscopy in combination with density functional theory calculations. The films were prepared by Si vapor deposition and subsequent oxidation at high temperatures. The silica film first grows as a monolayer of corner-sharing [SiO(4)] tetrahedra strongly bonded to the Ru(0001) surface through the Si-O-Ru linkages. At increasing amounts of Si, the film forms a bilayer of corner-sharing [SiO(4)] tetrahedra which is weakly bonded to Ru(0001). The bilayer film can be grown in either the crystalline or vitreous state, or both coexisting. Further increasing the film thickness leads to the formation of vitreous silica exhibiting a three-dimensional network of [SiO(4)]. The principal structure of the films can be monitored by infrared spectroscopy, as each structure shows a characteristic vibrational band, i.e., ～1135 cm(-1) for a monolayer film, ～1300 cm(-1) for the bilayer structures, and ～1250 cm(-1) for the bulk-like vitreous silica.