Solid-phase synthesis of 1,5-substituted 2-(N-alkylamino)-imidazolidin-4-ones

The solid-phase synthesis of 1,5-substituted 2-(N-alkylamino)-imidazolidin-4-one from resin-bound amino acid is described. Using a guanidinylating reagent in solution to form the guanidine moiety instead of resin-bound carbodiimide, an N-alkyl substitution is introduced specifically onto the 2-amino position. Combined with an alkylation step of the resin-bound amino acid prior to guanidinylation, all desired substitutions of the final products are achieved without racemization at chiral centers. This reaction sequence is also compatible with a variety of protected amino acid side chains.     

Solid-phase synthesis of indolines via palladium-catalyzed cyclization

The solid-phase synthesis of indolines from resin-bound 2-bromophenylacetylated amino acids is described. The exhaustive reduction of solid-support bound amides with borane afforded the requisite secondary amines that, following the palladium-catalyzed intramolecular cyclization and cleavage, provided the corresponding disubstituted indolines.     

Improved conditions for converting sterically hindered amides to 1,5-disubstituted tetrazoles

Improved conditions for converting amides into 1,5-disubstituted tetrazoles are described. The optimum reaction conditions [diisopropyl azodicarboxylate (DIAD), diphenylphosphoryl azide (DPPA), and diphenyl-2-pyridyl phosphine in THF at 45 °C] converted sterically hindered amides to their corresponding tetrazoles in good yield.     

Efficient solid-phase synthesis of 1,3,5-trisubstituted 1,3,5-triazine-2,4,6-triones

The solid-phase synthesis of 1,3-disubstituted and 1,3,5-trisubstituted 1,3,5-triazine-2,4,6-triones from MBHA and Wang resin is described. Reaction of resin-bound amino acids with isocyanates yield resin-bound ureas, which further react with chlorocarbonyl isocyanate in toluene at 65 degrees C to selectively afford the resin-bound 1,3-disubstituted 1,3,5-triazine-2,4,6-triones. Selective alkylation at the N-5 position of the resin-bound 1,3-disubstituted 1,3,5-triazine-2,4,6-triones was accomplished by treatment with alkyl halides in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU). The desired products were cleaved from their solid support and obtained in good yield and purity. The method can be employed in production of toltrazuril analogue libraries for identification of new anticoccidial agents.     

Use of Vilsmeier reagent for the solid-phase synthesis of 1,5-disubstituted 4,5-dihydro-1H-imidazoles and disubstituted 4,5-dihydro-1H-imidazolylbenzimidazoles

The solid-phase synthesis of novel imidazolines and dihydroimidazolylbenzimidazoles is described. Resin-bound diamines, derived from resin-bound N-acylated amino acid amides, were cyclized using Vilsmeier reagent to yield imidazolines following cleavage. Similarly, cyclization of resin-bound tetraamines having two secondary amines and an o-dianiline yielded dihydroimidazolylbenzimidazoles following cleavage.     

Solid-phase synthesis of 1,7-disubstituted-1,3,5-triazepane-2,4-diones

[reaction: see text]. The solid-phase synthesis of 1,7-disubstituted-1,3,5-triazepane-2,4-diones from resin-bound amino acids is described. The exhaustive reduction of solid-support bound amides with borane afforded the requisite secondary amines, which following treatment with phenyl isocyanatoformate and cleavage, provided the corresponding triazepane-2,4-diones.     

Parallel solid-phase synthesis of trisubstituted triazinobenzimidazolediones

An efficient method for the solid-phase synthesis of trisubstituted [1,3,5]triazino[1,2-a]benzimidazole-2,4(3H,10H)-diones from resin-bound amino acids is described. N-acylation of the primary amine of a resin-bound amino acid with 4-fluoro-3-nitrobenzoic acid, followed by displacement of the fluoro group and reduction of the nitro group, generated a resin-bound o-dianilino derivative. The dianilino compound was treated with cyanogen bromide to generate the corresponding iminobenzimidazole, which, following treatment with N-(chlorocarbonyl)isocyanate, afforded the resin-bound triazinodione derivative. Alkylation of the triazinodione compound with an alkyl halide yielded, following cleavage of the solid-support, the trisubstituted [1,3,5]triazino[1,2-a]benzimidazole-2,4(3H,10H)-dione.     

Pseudoephedrine as a chiral auxiliary for asymmetric Michael reactions: synthesis of 3-aryl-delta-lactones

[reaction: see text] The asymmetric Michael reaction of pseudoephedrine amides is reported. The 1,5-dicarbonyl products are converted to 3-aryl-delta-lactones in a two-step reduction/lactonization sequence. This method provides access to enantiomerically enriched trans-3,4-disubstituted delta-lactones.     

Solid-phase synthesis of urea and amide libraries using the T2 triazene linker

Starting from Merrifield resin, primary amines were immobilized in two steps by triazene linkage (T2-linker). While reaction with isocyanates gave rise to resin-bound urea derivatives, acylation by acid chlorides or anhydrides furnished amides bound to solid support via the nitrogen atom, therefore representing a novel backbone amide linker. Cleavage from the resin was conducted using dilute trimethylsilyl chloride or trifluoroacetic acid, respectively, to yield ureas and amines/amides in a library format (altogether 60 examples; manual synthesis: 17 ureas, 6 mono-alkylated ureas [including dihydroxylation and ozonolysis/Wittig reaction]; automated synthesis: 15 ureas, 15 amides) in high purities and good overall yields. The synthesis of a small library (4 x 4 member) was successfully conducted on a Bohdan Neptune synthesizer.     

Regiocontrolled synthesis of pyrrole-2-carboxaldehydes and 3-pyrrolin-2-ones from pyrrole Weinreb amides

A regiocontrolled synthesis of 3,4-disubstituted pyrrole-2-carboxaldehydes was completed in two steps from acyclic starting materials. A Barton-Zard pyrrole synthesis between N-methoxy-N-methyl-2-isocyanoacetamide and alpha-nitroalkenes or beta-nitroacetates provided N-methoxy-N-methyl pyrrole-2-carboxamides (pyrrole Weinreb amides), which were converted into the corresponding pyrrole-2-carboxaldehydes by treatment with lithium aluminum hydride. A regioselective oxidation of the pyrrole-2-carboxaldehydes gave the corresponding 3,4-disubstituted 3-pyrrolin-2-ones.     

Parallel solid-phase syntheses of 1,3,4-thiadiazolium-2-aminides

An efficient and advantageous solid-phase strategy has been developed to synthesize 1,3,4-thiadiazolium-2-aminides. The title compounds were prepared in parallel fashion according to the following compact route: (i) anchoring of aromatic aldehydes to the solid support; (ii) solution preparation of 1,4-disubstituted thiosemicarbazides from hydrazines plus isothiocyanates; (iii) trimethylsilyl chloride-promoted cyclization between the resin-bound aldehydes and 1,4-disubstituted thiosemicarbazides; and (iv) removal of the products from the solid support by acid treatment. The products (17 made in all) were cleaved with high initial purities (90-98%) and obtained in generally good isolated yields (53-94%, with one exception).     

Stereospecific synthesis of 1,5-disubstituted tetrazoles from ketoximes via a Beckmann rearrangement facilitated by diphenyl phosphorazidate

A novel method for the stereospecific synthesis of 1,5-disubstituted tetrazoles from ketoximes via the Beckmann rearrangement was developed using diphenyl phosphorazidate (DPPA) as both the oxime activator and azide source. Various ketoximes were transformed into the corresponding 1,5-disubstituted tetrazoles with exclusive trans-group migration and no E-Z isomerization of the ketoxime. This method enables the preparation of 1,5-disubstituted tetrazoles without using toxic or explosive azidation reagents.     

An efficient method to convert lactams and amides into 2,2-dialkylated amines

A practical method for the synthesis of gem-2,2-disubstituted tertiary amines from the corresponding lactams (or amides) is reported. It is based on the reaction of thioiminium ions, easily prepared from lactams and amides with organometallic reagents such allylmagnesium, benzylmagnesium, and primary alkylcerium reagents.     

Controllable diastereoselective cyclopropanation. Enantioselective synthesis of vinylcyclopropanes via chiral telluronium ylides

Novel chiral telluronium salts 1 are designed for asymmetric synthesis of 1,3-disubstituted 2-vinylcyclopropanes. The allylides, generated in situ from the corresponding telluronium salt in the presence of different base, reacted with alpha,beta-unsaturated esters, ketones, and amides to afford cis-2-silylvinyl-trans-3-substituted or trans-2-silylvinyl-trans-3-substituted cyclopropane derivatives with high diastereoselectivity and excellent enantioselectivity in good to high yields. Thus, either one of the two diastereomers could be enantioselectively synthesized at will just by the choice of LiTMP/HMPA or LDA/LiBr. The first examples of catalytic ylide reaction for enantioselective synthesis of 1,3-disubstituted 2-vinylcyclopropanes with high distereoselectivity is also achieved.     

1-Benzotriazol-1-yl-3,3,3-trifluoro-2-methoxy-2- phenylpropan-1-ones: Mosher-Bt reagents

Benzotriazole derivatives of 3,3,3-trifluoro-2-methoxy-2-phenylpropionic acid react with water-soluble amino acids and peptides in an acetonitrile/water (2:1) mixture to give the corresponding amides in quantitative yield.     

Synthesis of spirohydantoins and spiro-2,5-diketopiperazines via resin-bound cyclic alpha,alpha-disubstituted alpha-amino esters

A seven-step solid-phase synthesis of spirohydantoins and an eight-step solid-phase synthesis of spiro-2,5-diketopiperazines is reported. Key intermediate in the synthesis of both compound libraries is the resin-bound cyclic alpha,alpha-disubstituted alpha-amino ester, which can be obtained after selective homogeneous reduction of the aliphatic nitro ester using tin(II) chloride dihydrate. Nitro ester, in turn, is synthesized by a high-pressure-assisted [4 + 2] cycloaddition of resin-bound nitro alkene and butadiene, whereas nitro alkene is obtained by a Knoevenagel condensation of resin-bound nitro acetate with an imine. Novel spirohydantoins are obtained by isocyanate coupling with the resin-bound amino ester 5, followed by cyclization cleavage using a base. Novel spiro-2,5-diketopiperazines are obtained by PyBOP coupling of a Fmoc-protected amino acid with resin-bound amino ester, followed by Fmoc deprotection and an acid-assisted cyclization cleavage. After preparation of seven different resin-bound alpha,alpha-disubstituted alpha-amino esters, a 7 x 8 compound library of spirohydantoins was synthesized using eight different isocyanates, and a 7 x 8 compound library of spiro-2,5-diketopiperazines was synthesized using eight different Fmoc amino acids.     

Hydrolysis of 4-imino-imidazolidin-2-ones in acid and the mechanism of cyclization of hydantoic acid amides

The hydrolysis of iminohydantoins generates the same tetrahedral intermediate as that obtained in the cyclization of hydantoic acid amides to hydantoins. The ratio of the products of imine hydrolysis under kinetic control is determined by the relative height of the barriers of the breakdown of to amide or to hydantoin. Thus the partitioning of products unequivocally proves which is the rate determining step in the cyclization reaction-formation or breakdown of . UV and 1H NMR monitoring of the acid catalyzed hydrolysis of four 5-substituted 4-imino-1-methyl-3-(4-nitrophenyl)imidazolidin-2-ones found hydantoins as the only products. The kinetics of hydrolysis of imines were measured in 0.001-1 M HCl. Contrary to the remaining imines, 1,5-dimethyl-4-imino-3-(4-nitrophenyl)imidazolidin-2-one is readily oxidized as stock solution in THF containing peroxides to 1,5-dimethyl-5-hydroxy-4-imino-3-(4-nitrophenyl)imidazolidin-2-one . In all cases, hydrolysis was found to be zero order with respect to [H+]. As imines are fully protonated under the acidity studied, this is evidence of a transition state of a single positive charge. Comparison of imine hydrolysis rates with previous data on rates of cyclization of the corresponding amides of hydantoic acids allowed conditions (acid concentration, substitution pattern-gem-dimethyl effect) to be found that guaranteed kinetic control of the products obtained. Thus it was unequivocally proven that formation of the tetrahedral intermediate is rate determining in the cyclization of hydantoic acid amides. The small steric effects upon methyl substitution at 5-C and a solvent kinetic isotope effect kH/kD of 1.72 favour a mechanism for imine hydrolysis whereby the rate is limited by water attack on the protonated imine concerted with proton transfer from attacking water to a second water molecule.     

Efficient kinetic resolution of amino acids catalyzed by lipase AS ‘Amano’ via cleavage of an amide bond

Herein the efficient kinetic resolution of non-natural alpha-amino acids catalyzed by lipase AS ‘Amano’ via cleaving the amide bond is reported. The starting materials were the corresponding amino acid amides and the amino acids were generated with ees of up to 99% with E values of >600. These results indicated that the lipase AS ‘Amano’ could be a powerful amide hydrolase for the kinetic resolution of amino acid starting from the corresponding amino acid amides.     

Electron impact mass spectral fragmentation patterns of 2a,4-disubstituted 5-benzoyl-2-chloro-2a,3,4,5-tetrahydroazeto[1,2-a][1,5]benzodiazepin-1( 2H)-ones

The mass spectrometric behaviour of six 2a,4-disubstituted 5-benzoyl-2-chloro-2a,3,4,5-tetrahydroazeto[1,2-a][1,5]benzodia zepin-1(2H)-ones has been studied with the aid of mass-analysed ion kinetic energy spectrometry and accurate mass measurements under electron impact ionization. All compounds show a tendency to eliminate a chlorine atom, a chlorine atom plus benzaldehyde, benzoyl radical, chloroketene or chlorine atom plus CO and H2O molecules to yield, respectively, [M-Cl]+ ions, 2a,4-disubstituted 2a,3-dihydroazeto[1,2-a][1,5]benzodiazepin-1(2H)-one ions, [M-PhCO]+ ions, 2,4-disubstituted 1-benzoyl-2,3-dihydro-1H-1,5-benzodiazepine ions, or 1,2,4-trisubstituted 1H-1,7-benzodiazonine ions, which could also be formed from [M-Cl]+ ions by loss of CO and H2O molecules simultaneously. The [M-Cl]+ ions could further lose benzoyl radical to form [M-Cl-PhCO]+ ions, or lose benzoyl amide and undergo a rearrangement to form 4,6-disubstituted 1-benzoazocine-2(1H)-one ions. The [M-PhCO]+ ions could eliminate NH to produce 2a,4-disubstituted 2,2a,3,4-tetrahydroazeto[1,2,-a]quinolin-1-one ions, which could further eliminate chloroketene, CO and/or HCl to produce some important ions, respectively. 2,4-Disubstituted 1-benzoyl-2,3-dihydro-1H-1,5-benzodiazepine ions could lose benzoyl radical to yield 2,4-disubstituted 2,3-dihydro-1H-1,5-benzodiazepine ions, which could further yield other small fragment ions by loss of propene/styrene or small fragments.     

Rapid sequencing and disulfide mapping of peptides containing disulfide bonds by using 1,5-diaminonaphthalene as a reductive matrix

MS/MS is indispensable for the amino acid sequencing of peptides. However, its use is limited for peptides containing disulfide bonds. We have applied the reducing properties of 1,5-diaminonaphthalene (1,5-DAN) as a MALDI matrix to amino acid sequencing and disulfide bond mapping of human urotensin II possessing one disulfide bond, and human guanylin possessing two disulfide bonds. 1,5-DAN was used in the same manner as the usual MALDI matrices without any pre-treatment of the peptide, and MS/MS was performed using a matrix-assisted laser desorption/ionization quadrupole ion trap time-of-flight mass spectrometer (MALDI QIT TOFMS). The results demonstrated that MS/MS of the molecular ions reduced by 1,5-DAN provided a series of significant b-/y-product ions. All 11 amino acid residues of urotensin II were identified using 1,5-DAN, while only 5 out of 11 residues were identified using 2,5-dihydroxybenzoic acid (DHB); similarly 11 out of 15 amino acid residues of guanylin were identified using 1,5-DAN, while only three were identified using DHB. In addition, comparison of the theoretical and measured values of the mass differences between corresponding MS/MS product ions using 1,5-DAN and DHB narrowed down the possible disulfide bond arrangement candidates. Consequently, 1,5-DAN as a reductive matrix facilitates rapid amino acid sequencing and disulfide mapping for peptides containing disulfide bonds.