微波辐射对TiO2制备及其光催化氧化乙醛性能的影响

采用微波辐射与常规加热法由TiO₂溶胶制备出TiO₂催化剂，采用高频低功率微波-光催化装置考察了微波对两种催化剂上CH₃CHO光催化氧化转化率和产物分布的影响。结果表明，微波干燥制备的TiO₂晶体比普通加热制备的TiO₂晶体对乙醛有更高的光催化活性和更强的氧化能力，且它们对乙醛光催化氧化的途径不同，前者的初始中间体为甲醛和甲酸，后者的初始中间体却为乙酸。还发现，微波辐射对两种样品上乙醛的光催化转化率有不同的影响，对微波辐射法所制样品的影响比对常规加热法所制样品的影响显著。微波辐射通过场效应可加速光催化初始中间体的转化，但它不改变光催化反应的途径，反应途径取决于光催化剂的特性。     

微波加热反应制备纳米TiO2混晶及其光催化性能

微波加热反应制备纳米TiO2混晶及其光催化性能;纳米二氧化钛;混晶;微波加热;光催化性能     

微波强化光催化氧化技术研究现状及展望

综述了微波强化光催化氧化的处理效果和机理,并对催化剂投量、光源、溶解氧、温度等相关因素对处理效果的影响进行了详细阐述.最后对微波强化光催化的应用前景进行了展望.     

纳米复合材料K_8[γ-SiW_(10)O_(36)]·12H_2O/ZrO_2微波增强光催化降解二甲酚橙

通过溶胶.凝胶再程序升温熔剂热一步法制备了K8[γ-SiW10O36]·12H2O/ZrO2纳米复合光催化材料,采用FT-IR、XRD、ICP-AES和氮气吸附-脱附测定等测试手段对其组成、结构、形貌等进行了表征.结果表明,复合材料中杂多酸的基本结构未发生明显变化,并且该复合材料比表面积增大(120.061m2/g)的同时还具有孔结构,平均孔径约为3.7nm.在微波无极灯照射下,以微波增强光催化降解二甲酚橙为模型反应,研究了该纳米复合材料微波增强光催化性能,结果表明,在微波作用下,复合光催化材料K8[γ-SiW10O36]·12H2O/ZrO2的光催化活性显著增强.     

微波-光催化耦合效应及其机理研究

采用溶胶 凝胶法制备了TiO2和/TiO2催化剂，运用XRD、BET比表面积测定及微波吸收谱等技术对催化剂的结构进行了表征，并以C2H4为模型反应物考察了微波对催化剂的光催化氧化反应性能的影响.研究结果表明，在微波场中TiO2和/TiO2催化剂的光催化氧化性能得到明显改善.时间分辨紫外 可见吸收谱证实微波场的存在有效地提高了催化剂对紫外光的吸收率.因此，微波场与紫外光的耦合使光催化活性提高的可能原因是微波场对多缺陷催化剂的极化作用,提高了光致电子的跃迁几率，并在半导体表面形成陷阱中心,降低了电子 空穴对的复合率.     

微波增强H3PW12O40／TiO2光催化降解染料和水杨酸的研究

以孔雀石绿为模型分子, 考察了微波无极灯的形状、微波功率和溶液初始浓度对光催化降解效果的影响. 并且在最佳微波反应条件下, 考察了通过溶胶-凝胶再结合程序升温水热法制备的复合材料H3PW12O40/TiO2对刚果红、酸性黑、酸性品红和水杨酸的光催化降解情况. 结果表明, 微波无极灯具有更好地增强H3PW12O40/TiO2光催化降解有机污染物的作用.     

微波法制备SO_4~(2-)_/TiO_2催化剂及其光催化氧化性能

采用微波法、混合加热法和常规加热法制备 SO_4~(2-)/TiO_2催化剂 ,运用 XRD、 BET、 DRS及 LRS光谱测定等技术对催化剂的结构进行了表征 ,并以光催化降解 C2H4为模型反应考察了不同制备方法对催化剂的光催化氧化反应性能的影响 .研究结果表明 ,微波法制备的 SO_4~(2-)/TiO_2催化剂的光催化氧化性能得到明显改善 ,对乙烯转化率为 80％ ,而混合加热法和常规加热法制备的样品乙烯转化率分别为 58％和 41％ .微波辐射制备的催化剂锐钛矿相含量高、比表面积大 ,光吸收阈值增大;并且拉曼散射光谱向低波数方向移动 ,有助于增加光致电子的跃迁几率 ,提高多相光催化过程的本征量子效率 .     

掺铁纳米TiO2的制备及其光催化性能

掺铁纳米TiO2的制备及其光催化性能;掺铁纳米TiO2;微波合成;光催化降解;维生素B12     

微波辅助合成纳米复合材料Ag/ZnO-ZnS及其光催化降解若丹明B初步研究

采用微波辅助合成方法制备了具有高光催化活性的纳米复合材料Ag/ZnO-ZnS,经X-射线衍射(XRD)、透射电子显微镜(TEM)、扫描电子显微镜配合X-射线能量色散谱仪(SEM-EDS)以及氮气吸附-脱附测定等对合成材料的结构、形貌和表面物理化学性质进行了表征。结果表明,经微波处理后的纳米复合材料Ag/ZnO-ZnS中Ag以单质形式存在,具有纤锌矿晶型结构,属介孔材料,平均孔径约为4.1nm,比表面积更大,颗粒分布更加均匀。通过模型分子若丹明B分别考察了紫外和微波辐射下Ag/ZnO-ZnS的光催化活性,结果显示,微波辅助合成的Ag/ZnO-ZnS具有更高的光催化活性,其在微波增强光催化条件下,40min内对若丹明B脱色率达99%以上,明显高于市售P25等其他体系。     

微波辐射对纳米ZnO材料物理性质与光催化活性的影响

在采用沉淀法制备ZnO的过程中, 用不同功率(100, 150, 200, 250和300 W)的微波辐射ZnO前驱体, 获得了一系列纳米ZnO材料, 并对合成材料的晶型结构、 形貌及表面物理化学性质进行了表征. 结果表明, 与普通沉淀法制备的ZnO相比, 使用微波辐射后ZnO半导体材料的晶型仍为六方纤锌矿结构, 但吸收光谱发生了蓝移或红移, 且比表面积均有不同程度的增加. 同时, 微波辐射功率不同, ZnO形貌差异明显, 并随着微波功率变化分别呈现纳米颗粒、 椭圆形纳米团簇、 纳米片和球状纳米簇等多样化形态. 以罗丹明B为模型分子, 分别在紫外及微波辅助光催化条件下考察了所合成纳米ZnO材料的光催化性能. 结果显示, 经不同功率微波辐射作用后, ZnO的光催化活性均得到了不同程度的提高, 并且明显高于市售P25和未经微波辐射作用的ZnO.     

Beyond Reduction Cocatalysts: Critical Role of Metal Cocatalysts in Photocatalytic Oxidation of Methane with Water**

Environmentally sustainable and selective conversion of methane to valuable chemicals under ambient conditions is pivotal for the development of next-generation photocatalytic technology. However, due to the lack of microscopic knowledge about non-thermal methane conversion, controlling and modulating photocatalytic oxidation processes driven by photogenerated holes remain a challenge. Here, we report novel function of metal cocatalysts to accept photogenerated holes and dominate selectivity of methane oxidation, which is clearly beyond the conventional concept in photocatalysis that the metal cocatalysts loaded on the surfaces of semiconductor photocatalysts mostly capture photogenerated electrons and dominate reduction reactions exclusively. The novel photocatalytic role of metal cocatalysts was verified by operando molecular spectroscopy combined with real-time mass spectrometry for metal-loaded Ga₂O₃ model photocatalysts under methane and water vapor at ambient temperature and pressure. Our concept of metal cocatalysts that work as active sites for both photocatalytic oxidation and reduction provides a new understanding of photocatalysis and a solid basis for controlling non-thermal redox reactions by metal-cocatalyst engineering.     

半导体光催化研究进展与展望

评述了目前半导体光催化在国内外的研究概况,并对存在的问题和未来的发展动向进行简要分析.列举了近30年来关于光催化研究的部分成果,内容涉及光催化剂的制备(包括新催化剂的开发, TiO2、 ZnO、 CdS等光催化剂的各种改性或修饰)、光催化作用机理研究、光催化技术的工程化、光催化技术的各种应用研究和产品开发等等从基础到应用研究的各个方面.总体上来看,半导体光催化基本上是一个没有选择性的化学过程,所以再进行大量的不同反应物的光催化活性的评价研究意义已不是很显著,认为未来的半导体光催化研究应该集中在机理的深刻认识、光响应范围宽和量子效率高的催化剂制备、半导体光催化技术工程化及新型光催化产品开发方面.     

半导体氧化物光催化裂解水制氢

本文综述了半导体氧化物光催化裂解水制氢的反应机理,以及近年来半导体光催化裂解水制氢的研究进展。讨论了各种因素对材料光催化性能的影响以及改性方法,并对今后的研究方向提出了一些建议。     

半导体氧化物光催化裂解水制氢

本文综述了半导体氧化物光催化裂解水制氢的反应机理,以及近年来半导体光催化裂解水制氢的研究进展。讨论了各种因素对材料光催化性能的影响以及改性方法,并对今后的研究方向提出了一些建议。     

New insight into daylight photocatalysis of AgBr@Ag: synergistic effect between semiconductor photocatalysis and plasmonic photocatalysis

Noble metal nanoparticles (NPs) are often used as electron scavengers in conventional semiconductor photocatalysis to suppress electron-hole (e(-)-h(+) ) recombination and promote interfacial charge transfer, and thus enhance photocatalytic activity of semiconductors. In this contribution, it is demonstrated that noble metal NPs such as Ag NPs function as visible-light harvesting and electron-generating centers during the daylight photocatalysis of AgBr@Ag. Novel Ag plasmonic photocatalysis could cooperate with the conventional AgBr semiconductor photocatalysis to enhance the overall daylight activity of AgBr@Ag greatly because of an interesting synergistic effect. After a systematic investigation of the daylight photocatalysis mechanism of AgBr@Ag, the synergistic effect was attributed to surface plasmon resonance induced local electric field enhancement on Ag, which can accelerate the generation of e(-)-h(+) pairs in AgBr, so that more electrons are produced in the conduction band of AgBr under daylight irradiation. This study provides new insight into the photocatalytic mechanism of noble metal/semiconductor systems as well as the design and fabrication of novel plasmonic photocatalysts.     

The upsurge of photocatalysts in antibiotic micropollutants treatment: Materials design,recovery, toxicity and bioanalysis

The excessive use of antimicrobial agents such as antibiotics and disinfectants for domestic purposes and industries polluted the water bodies severely in the recent past. Thus released antimicrobial agents negatively impact the environment and human health as it induce antimicrobial resistance (AMR) to microbes in the environment. Conventional biodegradation routes showed feasible antibiotics pollutants degradation. Nonetheless, they often demand a long time of operation (usually in days) and a major portion of the antimicrobial agents is left untreated unlike the complete oxidation with advanced oxidation processes. The residues of antibiotics left in the water bodies accelerate growth of microorganisms (bacterial, fungal, and viral) with AMR. In virtue of avoiding the catastrophe of widespread AMR, photocatalysis assisted antibiotic pollutant treatment is recently gaining a great popularity as an advanced oxidation process and has shown to be useful for the removal of antimicrobial compounds, mainly antibiotics. Recent review reports on photocatalytic antibiotic degradation focus on summarizing materials progress and antibiotics pollutants in chronological viewpoints. However, the relationship between photocatalytic materials and antibiotics oxidation reaction pathways and the toxicity of by-products are needed to be shown with better clarity to transfer the photocatalysis technique from lab to market in a safe way. This review critically analyzes the insights of energetic semiconductor structure lacking to achieve hydroxyl and superoxide radicals mediated antibiotics degradation, recommends new materials design (Z scheme) and standardization in the experimental designs, and also informs the influencing parameters on antibiotic degradation. It further assesses the possibility of recovering value-added chemicals from the photocatalytic treatment process and highlights the importance of environmental toxicity analysis. Overall, this review will be a resourceful guide for interdisciplinary researchers working on advanced photocatalysis and pharmaceutical pollutant treatment for achieving a sustainable ecology and initiating a circular economy in chemical industries.     

Photocatalytic Enhancement Strategy with the Introduction of Metallic Bi: A Review on Bi/Semiconductor Photocatalysts

Semiconductor photocatalysis has great potential in the fields of solar fuel production and environmental remediation. Nevertheless, the photocatalytic efficiency still constrains its practical production applications. The development of new semiconductor materials is essential to enhance the solar energy conversion efficiency of photocatalytic systems. Recently, the research on enhancing the photocatalytic performance of semiconductors by introducing bismuth (Bi) has attracted widespread attention. In this review, we briefly overview the main synthesis methods of Bi/semiconductor photocatalysts and summarize the control of the micromorphology of Bi in Bi/semiconductors and the key role of Bi in the catalytic system. In addition, the promising applications of Bi/semiconductors in photocatalysis, such as pollutant degradation, sterilization, water separation, CO2 reduction, and N2 fixation, are outlined. Finally, an outlook on the challenges and future research directions of Bi/semiconductor photocatalysts is given. We aim to offer guidance for the rational design and synthesis of high-efficiency Bi/semiconductor photocatalysts for energy and environmental applications.     

Monolayer HNb3O8 for Selective Photocatalytic Oxidation of Benzylic Alcohols with Visible Light Response

Monolayer HNb₃O₈ 2D nanosheets have been used as highly chemoselective and active photocatalysts for the selective oxidation of alcohols. The nanosheets exhibit improved photocatalytic activity over their layered counterparts. Results of in situ FTIR, DRS, ESR, and DFT calculations show the formation of surface complexes between the Lewis acid sites on HNb₃O₈ 2D nanosheets and alcohols. These complexes play a key role in the photocatalytic activity of the material. Furthermore, the unique structural features of the nanosheets contributed to their high photocatalytic activity. An electron transition from the coordinated alcohol species to surface Nb atoms takes place and initiates the aerobic oxidation of alcohols with high product selectivity under visible light irradiation. This reaction process is distinct from that of classic semiconductor photocatalysis.     

光催化CO_2转化为碳氢燃料体系的综述

传统化石能源燃烧产生CO2引起的地球变暖和能源短缺已经成为一个严重的全球性问题.利用太阳光和光催化材料将CO2还原为碳氢燃料,不仅可以减少空气中CO2浓度,降低温室效应的影响,还可以提供碳氢燃料,缓解能源短缺问题,因此日益受到各国科学家的高度关注.本文综述了光催化还原CO2为碳氢燃料的研究进展,介绍了光催化还原CO2的反应机理,并对现阶段报道的光催化还原CO2材料体系进行了整理和分类,包括TiO2光催化材料,ABO3型钙钛矿光催化材料,尖晶石型光催化材料,掺杂型光催化材料,复合光催化材料,V、W、Ge、Ga基光催化材料及石墨烯基光催化材料.评述了各种材料体系的特点及光催化性能的一些影响因素.最后对光催化还原CO2的研究前景进行了展望.     

Highly Efficient Photocatalysts and Continuous‐Flow Photocatalytic Reactors for Degradation of Organic Pollutants in Wastewater

One of the most important applications for photocatalysis is engineered water treatment that photodegrades organic pollutants in wastewater at low cost. To overcome the low efficiency of batch degradation methods, continuous‐flow photocatalytic reactors have been proposed and have become the most promising method for mass water treatment. However, most commercial semiconductor photocatalysts are granular nanoparticles with low activity and a narrow active light wavelength band; this creates difficulties for direct use in continuous‐flow photocatalytic reactors. Therefore, a high‐performance photodegradation photocatalyst with proper morphology or structure is key for continuous photocatalytic degradation. Moreover, a well‐designed photocatalytic device is another important component for continuous‐flow photocatalysis and determines the efficiency of photocatalysis in practical water treatment. This review describes the basic design principles and synthesis of photocatalysts with excellent performance and special morphologies suitable for a filtering photocatalysis process. Certain promising continuous photodegradation reactors are also categorized and summarized. Additionally, selected scientific and technical problems that must be urgently solved are suggested.