Simultaneous determination of ammonia and urea with an asymmetric merging zones/flow-injection configuration

A method is proposed for the simultaneous determination of urea and ammonia using a reagent-injection configuration that includes a dual injection valve (for insertion of Nessler's reagent and for accommodating the enzyme reactor). The resolution of the two peaks obtained on each injection allows the determination of both analytes in mixtures. The determination range is 1–5 μg ml^?1 for ammonia and 1–6 μg ml^?1 for urea, with relative standard deviations of 1.13% and 2.31% for ammonia (first and second peaks) and 1.86% for urea.     

Indirect Potentiometric Determination of Chlorpromazine with an Oxidative Column In a Flow Injection System

Abstract

A flow-injection method is proposed for the determination of chlorpromazine and other N-substituted phenothiazines. The procedure is based on the oxidation of analyte with lead dioxide entrapped into polymeric material in a packed-bed reactor. The oxidation of the drug yields soluble Pb^2-, which is monitored by means of the lead ion selective electrode in the wall-jet configuration. The calibration graph is linear over the range of 0.01 – 2 μg ml^?1 of chlorpromazine with relative standard deviation of 1.4% and sample throughput 20 h^?1. The developed method was applied to the determination of chlorpromazine in pharmaceutical preparations.     

Integrated Retention/Spectrophotometric Detection Method for the Determination of Formaldehyde

Abstract

An integrated-sensor method for the determination of formaldehyde based on retention of the reaction product of the analyte with p-rosaniline and sulfite in a flow-cell packed with Dowex 1-X-8 anion exchange resin was developed. The method has a good selectivity with a detection limit of 0.3 μg ml^?1 (1 ml sample) or 75 ng ml^?1 (2 ml sample), and a linear range between 1–30 μg ml^?1. The relative standard deviations (n = 11) were 2.8 and 1.3% for 2 and 20 μg ml^?1 formaldehyde, respectively. Depending on the working conditions, the sampling frenquency ranged between 10 and 18 h^?1. The method was applied to the determination of formaldehyde in well water.     

A flow-injection system based on immobilized penicillinase and a linear pH-buffer for potentiometric determination of penicillin

Penicillin is determined in a flow-injection manifold by hydrolysis of the β-lactam ring by means of an on-line reactor containing immobilized penicillinase with detection of the produced acid by a glass electrode. The penicillin concentration is calculated as the difference in response between a sample passing through the enzyme reactor and a sample flowing directly to the glass electrode. The pH signal is made linearly dependent on the acid concentration by using a buffer mixture of constant buffer capacity and the reactor is designed so that hydrolysis of the penicillin is essentially complete in the reactor. The linear range is 0.1–15 mM penicillin and the sensitivity is 0.056 pH mM^?1. The sample throughput is 60 h^?1 and the relative standard deviation < 1%. The proposed method is primarily intended for the analysis of purified potassium salts of penicillins in pharmaceutical preparations.     

Ab initio study of β-lactam antibiotics. II. Potential energy surface for the amidic CN bond breaking in the 3-cephem + OH− reaction and comparison with the β-lactam + OH− reaction

The potential energy surface for the β-lactam amidic CN bond breaking in the 3-cephem + OH^? reaction was investigated by using the ab initio Hartree—Fock method with a 9s6p/7s3p/3s basis set. The investigated reaction is a model of the reaction between an antibiotic cephalosporin and an enzymatic nucleophilic group, this last reaction being related to the mode of action of β-lactam antibiotics. The minimum-energy reaction path is characterized by a tetrahedral intermediate ≈ 116 kcal mol^?1 more stable than the reagents, by a barrier which corresponds to the partial breaking of the amidic bond and is ≈ 7 kcal mol^?1 above the intermediate and by a product ≈ 31 kcal mol^?1 more stable than the intermediate. The analysis of the wavefunction along the reaction path and the comparison with the β-lactam + OH^? reaction pointed out the role of electron-withdrawing groups on the height of the barrier and the role of intramolecular hydrogen bonds on the structure and energy of the product. The calculations suggest a model of the antibiotic activity of cephalosporins which is compared with previous qualitative pictures.     

Fluorimetric determination of danthron in pharmaceutical tablets and in urine

A simple, rapid determination is reported for danthron (1,8-dihydroxyanthraquinone) in pharmaceutical tablets. In a flow-injection system, danthron is reduced by sodium dithionite in $\text{1}\text{1}$ methanol/borate buffer to give a fluorescent complex. Linearity ranges from 30 μg ml^?1 to below 0.1 μg ml^?1. In urine samples, danthron is separated from other fluorescing species by reversed-phase high-performance liquid chromatography before its reduction by dithionite in a post-column reactor. Urine preparation requires no extraction. Spiked urine samples were studied in the working range of 0.02–2.0 μg ml^?1 danthron.     

Spectrophotometric determination of copper with α, β, γ, δ-tetraphenylporphine trisulfonate

Water-soluble porphyrin, α, β, γ, δ-tetraphenylphorphine trisulfonate (TPPS, H₂R), was found to be a very useful agent for both the direct spectrophotometric determination and the photometric titration of copper(II). The molar absorptivity of H₄R²⁺ at 434 nm is 5.0·10⁵ and the spectrophotometric sensitivity is 0.00013 μg Cu cm^?2 for A=0.001. Beer's law is followed in the range 0.006 μg–0.06 μg Cu ml^?1. Among twenty-two elements examined, only zinc(II) seriously interfered. Acid dissociation constants and salt effects on the spectra of TPPS were evaluated.     

Solid-phase iodine as an oxidant in flow injection analysis: determination of ascorbic acid in pharmaceuticals and foods by background correction

A flow injection analysis (FIA)-background correction method comprising two solid-phase reactors and spectrophotometry for determination of ascorbic acid (AsA) is proposed. A polyethylene mini-column filled with solid iodine (30% m/m suspended on silica gel beads), reactor 1, and other column filled only with silica gel, reactor 2, which are then incorporated in a flow system so that solid iodine reagent in reactor 1 is affected as the sample passes through the column. The sample blank is produced by the oxidation of the AsA by iodine to form dehydroascorbic acid, insensitive to ultraviolet at 267 nm. AsA in samples is determined after injected in reactor 2; the difference in two analytical signal observed is related to amount of AsA. The linear range of the system is up to 50 μg ml⁻¹ with a detection limit of 0.08 μg ml⁻¹, R.S.D. of better than 1.0% and sampling frequency of 110 sample h⁻¹. The method is successfully applied to the determination of AsA in pharmaceuticals and foods.     

Simultaneous Determination of Valsartan and Hydrochlorothiazide in Tablets by High-Performance Liquid Chromatography

ABSTRACT

A method for the simultaneous determination of valsartan and hydrochlorothiazide in tablets is described. The procedure, based on the use of reversed-phase high-performance liquid chromatography, is linear in the concentration range 5.0-10.0 μg ml^?1 for valsartan and 0.5-2.0 μg ml^?1 for hydrochlorothiazide, is simple and rapid and allows accurate and precise results. The limit of detection was 1.0 μg ml^?1 for valsartan and 0.05 μg ml^?1 for hydrochlorothiazide.     

Square‐Wave Adsorptive‐Stripping Voltammetric Detection in the Quality Control of Fluoxetine

ABSTRACT

A simple and sensitive extraction-spectrophotometric method for the determination of barium and potassium is reported. The 18C6-Barium-Orange II (18C6-Ba-(OR II)₂) and 18C6-Potassium-Orange II (18C6-K-OR II) ternary complexes are quantitatively extracted into dichloromethane and their absorbances are measured at 483 nm. Linear calibration graphs were obtained over the barium concentration range of 0.1-5 μg ml^?1 and potassium concentration range of 1-8 μg ml^?1. The relative standard deviation for 2.0 μg ml^?1 barium and pottasium are, respectively, 4.16% and 3.60%. The interfering effect of a large number of diverse ions on the determination of barium and potassium was studied. The method was applied to a synthetic sample with natural matrix effects of tap water and the results showed high potential of the recommended method for the determination of Ba and K in water samples.     

Spectrophotometric determination of ethanol in blood using a flow-injection system with an immobilized enzyme (alcohol dehydrogenase) reactor coupled to an on-line dialyser

The determination of ethanol in whole blood without pretreatment using spectrotometric detection with an immobilized enzyme reactor coupled to an on-line dialyser is described. Optimum working conditions are given. The effects of the injection volume and the flow-rate on the peak height using the dialyser were investigated. A good linear calibration graph over the ethanol concentration range 3–40 μg ml^?1 was observed; these concentrations correspond to 0.3?4.0 g of ethanol per 1000 g of whole blood prior to dilution. For comparison, whole blood samples were analysed by gas chromatography with direct injection. The effect of temperature on the peak height was also studied in a system without the dialyser.     

Fluorimetric determination of mebendazole and flubendazole in pharmaceutical dosage forms after alkaline hydrolysis

The selective and very sensitive fluorimetric determination of mebendazole and flubendazole is based on alkaline hydrolysis and adsorption on Whatman 42 filter paper. Limits of detection are 0.1 μg ml^?1 and 0.5 μg ml^?1, respectively, with linear response sponse up to 10 μg ml^?1 and 50 μg ml^t?1. The fluorescence produced is very stable (λ_em = 460 nm) and the method is applicable to anthelmintic pharmaceutical preparations.     

Simultaneous determination of free and EDTA-complexed copper ions by flame atomic absorption spectrometry with an ion-exchange flow-injection system

A simple method is described for the simultaneous determination of free and complexed copper ions in a flow-injection system comprising ion-exchange and flame atomic absorption spectrometry. Sampling rates for 400-μl samples were 90 h^?1. Typical relative standard deviations for the simultaneous determinations were 1.6% for the complexed metal (0.50 μg ml^?1) and 1.0% for the free metal (0.20 μg ml^?1).     

Ion-interaction chromatography of dithiocarbamates on βBondapak CN and LiChrosorb RP-8 stationary phases in the presence of tetraalkylammonium salts

Dithiocarbamates are examined by high-performance liquid chromatography on βBondapak CN and LiChrosorb RP-8 bonded phases using ion-interaction with tetraalkylammonium salts. The effects of the tetraalkylammonium cation and its inorganic co-anion on solute retention are considered. The response for sodium diethyldithiocarbamate is linear over the range 1–500 μg ml^?1, with a detection limit of 0.1 μ ml^?.     

Spectrophotometric determination of trace amounts of beryllium using 1,8-dihydroxyanthrone as a new chromogenic reagent

A simple, rapid, and sensitive spectrophotometric method for the trace level determination of beryllium based on the formation of a 1:2 complex with anthralin (1,8-dihydroxyanthrone) as a new reagent is developed. A spectrophotometric method was used to determine the acidity constant and stepwise proton dissociation of the reagent. The experimental conditions for determining beryllium including the influences of pH, reagent concentration and time were evaluated and optimized. Under the optimum experimental conditions, the molar absorptivity of the complex is 0.47 × 10⁴ l mol^?1 cm^?1 at 545 nm. Calibration graph was linear in the range of 0.04–1.04 μg ml^?1 with a detection limit of 0.012 μg ml^?1 and a %RSD of 0.43%, for 5 replicate determinations at 0.48 μg ml^?1 of Be(II). The interferring effect of some cations and anions was also studied. The method was applied for the determination of beryllium in beryl, silicate rock and alloys. Ethylenediaminetetraacetic acid (EDTA) was used for masking interfering ions.     

The Degradation Mechanism of an Oral Cephalosporin: Cefaclor

The degradation of cefaclor ( 1 ), an oral cephalosporin antibiotic, was studied at 37° in a neutral aqueous medium by HPLC and ¹H-NMR. Under these conditions, 1 underwent intramolecular aminolysis by the 7-side-chain NH₂ group on the β-lactam moiety to give a piperazine-2,5-dione. The most prominent peak in the HPLC profile of a degradation solution from 1 was isolated by prep. HPLC. Mechanistically, the formation of this degradation product cis- 11 from 1 involves the contraction from a six-membered cephem ring to a five-membered ring, which presumably takes place via a common episulfonium ion intermediate 9 (see Scheme). Loss of the Cl-atom from 3-chloro-3-cephem is a general reaction subsequent to β-lactam ring opening.     

Determination of ultra-trace levels of cobalt by ion chromatographic separation and chemiluminescence detection

A luminol chemiluminescence detection/flow injection analysis technique coupled with ion chromatography (IC) has been examined for the selective determination of cobalt (II) at pg ml^?1 levels. A barium chloride solution was used as an eluent in the IC to separate cobalt(II) from interferents. When a 100-μ1 sample injection volume was used, the detection limit was 1.0 pg ml^?1 cobalt; the minimum detectable amount of cobalt was 100 fg. The calibration graph was linear above 10 pg ml^?1 and the linear dynamic range extended over six orders of magnitude. The relative standard deviation for ten replicate measurements of 30 pg ml^?1 cobalt was 3.8%. The results of the analysis of a synthetic sample corresponding to a boiling-water reactor coolant and some commercially available copper(II) standard solutions are given.     

A Fluorosensor with Immobilized Cyclodextrin As A Substrate

Abstract

A flow-through optosensor for phenylalanine and tyrosine is described in this paper. The sensor is developed in conjunction with a flow-injection analysis system and uses immobilized β-cyclodextrin as the sensing agent. The analytical performance characteristics of the proposed sensor for analysis of very low levels of phenylalanine and tyrosine were as follows: the detection limits for phenylalanine and tyrosine were 0.20 μg ml^?1 and 8.9 ng ml^?1, respectively. The observed relative standard deviations were 1.03% for 50 μg ml^?1 of phenylalanine (n = 7) and 3.6% for 0.1 μg ml^?1 of tyrosine (n = 7), respectively.     

Flow-injection spectrophotometric determination of ascorbic acid by reduction of vanadotungstophosphoric acid

Ascorbic acid may be determined spectrophotometrically at 360 nm based on reduction of vanadotungstophosphoric acid using flow-injection analysis. The carrier stream was distilled water and the reagent streams were buffer solution (pH 3.0), 1.735 × 10^?3 M dodecatungstophosphoric acid and 1.735 × 10^?3 M sodium vanadate. The injection rate was 80 h^?1. The calibration graph was linear up to 80 μg ml^?1 ascorbic acid and the relative standard deviation for the determination of 20 μg ml^?1 ascorbic acid was 1.5% (n=10). The detection limit was 1.0 μg ml^?1 ascorbic acid, based on an injection volume of 250 μl. The system was applied to the determination of ascorbic acid in vitamin C tablets.     

Colorimetric Determination of Propofol in Bulk form,Dosage Form and Biological Fluids

ABSTRACT

Propofol is coupled with 2, 6-dichloroquinone-4-chlorimide (DCQ) in a reaction buffered at pH 9.6 to give a colored product having an analytically useful maximum at 635 nm. The factors affecting the color generation were optimized and incorporated in the procedure. The reacted propofol has a molar absorptivity of 3.9 × 10^?4 L mol^?1 cm^?1, and Beer's law is obeyed for concentrations 1-5 μg ml^?1 with detection limit 0.25 μg ml^?1. The method was found applicable to biological fluids (plasma and urine) spiked with propofol at concentration levels 1-5 μg ml^?1 for plasma and 1-5 μg 0.5 ml^?1 urine (less sensitivity is obtained with urine volumes above 0.5 ml) with detection limits 0.28 μg ml^?1 for plasma and 0.4 μg 0.5 ml^?1 urine. The average recovery for the commercial preparation (1% w/v propofol emulsion intravenous injection for infusion) was 99.54% with an RSD of 1.05%. The method was validated by an adopted HPLC method. The results obtained by the HPLC method for the commercial preparation were statistically compared with the proposed method and evaluated at the 95% confidence limits.