Spectrofluorimetric determination of titanium,zirconium and hafnium and their binary mixtures with biacetylmonoxime nicotinylhydrazone

The synthesis, characteristics and analytical applications of biacetylmonoxime nicotinylhydrazone are described. This compound forms fluorescent complexes with titanium(IV) (λ_ex = 430, λ_em = 540 nm), zirconium (λ_ex = 415 nm, λ_em = 505 nm) and hafnium (λ_ex = 400, λ_em = 500 nm) in an acidic medium. Titanium forms a 1:2 metal:ligand complex, whereas zirconium and hafnium form 1:2:1 metal:ligand:sulphate ternary complexes. Highly selective spectrofluorimetric methods for titanium (20–100 ng ml^?1), zirconium and hafnium (5–100 ng ml^?1) are proposed, and procedures for the analysis of binary mixtures of these ions are described.     

Synthesis and optical properties of new polyurethane cationomers with anchored stilbene chromophores

An ionic diol bearing a one‐sided urethane‐stilbene group located on the ammonium quaternary structure was prepared and proposed as an intermediate for polyurethane ionomer synthesis. Polyurethane cationomers with stilbene ionic groups based on poly(tetramethylene oxide) diols, 4,4′‐diphenylmethane diisocyanate and the aforementioned ionic diol, were synthesized and characterized. Some aspects of the trans–cis photoisomerism and fluorescent emission of the stilbene chromophore in polyurethane cationomers were studied comparatively with the urethane‐stilbene diol. The stilbene polycations absorbed at λ_A = 316 nm and emitted violet‐blue light with an emission maxima at λ_F = 444 nm (dimethylformamide solution) and λ_F = 465 nm (film). These polymers are known for their elastomeric properties and are assumed to be of great interest for some future applications. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1918–1928, 2002     

Comparison of activities of homogeneous Ti-based catalysts in the presence of methylaluminoxane (MAO) for synthesis of syndiotactic polystyrene by UV/visible spectroscopic study

The catalytic activities in syndiospecific polymerization of styrene in hydrocarbon using homogeneous Ti-based catalysts in the presence of methylaluminoxane (MAO) were investigated through UV/visible spectroscopic analysis. A strong UV absorption band of CpTiCl₃, itself, incipiently appeared at λ_max = 400 nm in toluene, followed by a bathochromic shift with its remarkable decrease by the addition of MAO. The absorption band intensity at λ_max = 400 nm arising from delocalization of π-electrons on the cyclopentadienyl ring decreased by methylation in the presence of MAO with regard to the mechanism for production of an active center (“cation-like”), for example, the change of the ionic nature. The intensity decrease at λ_max = 400 nm was suppressed over 2000 of the [Al]/[Ti] ratio. In the case of Ti(OC₄H₉)₄ having a σ-ligand, new and broad UV absorption bands were developed at λ_max = 340 nm and 410 nm in the presence of MAO in contrast with the CpTiCl₃/MAO system. Comparison between the relative absorption intensities at λ_max = 340 nm and 410 nm led to the determination of a maximum catalytic activity of Ti(OC₄H₉)₄ in the presence of MAO related to the polymerization yield. The maximum polymerization yield was observed with regard to the relative maximum value of the absorption intensity at λ_max = 410 nm with the [Al]/[Ti] ratio (500). From observation for polymorphism of the final products via differential scanning calorimetric analysis (DSC), the thermally unstable β-form seemed to be produced by the CpTiCl₃/MAO system independent of the MAO concentration, the Ti(OC₄H₉)₄/MAO system produced a thermally stable α-form in the low MAO concentration (up to 100 of the [Al]/[Ti] ratio), and a mixture of α- and/or β-forms over 200 of the [Al]/[Ti] ratio under our experimental conditions. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1733–1741, 1998     

Light absorption in solutions of cetyltrimethylammonium and cetylpyridinium bromides

Absorption of monochromatic light in solutions of cetyltrimethylammonium (CTAB) and cetylpyridinium (CPB) bromides has been studied in the wavelength λrange of 190–1000 nm. The investigation has been performed at 30°C and surfactant concentrations ranging from 5 × 10^?5 to 3.5 × 10^?3 M. Spectra of solutions of LiBr, KBr, and CTAB in the premicellar concentration region have been shown to coincide with each other. They are unimodal, and the heights of their maxima at λ_max ≈ 193 nm depend on Br^? concentration alone. In contrast to CTAB solutions, the UV spectra of CPB solutions are characterized by the presence of two absorption maxima near λ_max1 = 191 nm and λ_max2 = 259 nm, as well as a shoulder at 210–218 nm. Their existence is caused by the presence of both Br^? anions and CP⁺ cations in the solutions. The dependences of the integral absorption in the examined wavelength range on CPB concentration exhibit inflections both in the premicellar region and upon the transition to micellar solutions, with these inflections characterizing the critical dimerization and micellization concentrations, respectively. For CTAB, this regularity has only been observed at the critical micellization concentration. The data on the concentration dependence of the light absorption have resulted in the proposal of a method for determining the degree β of counterion binding by micelles of ionic surfactants. The β values calculated for CTAB and CPB are equal to 0.89 ±0 0.1.     

Low-Temperature Phosphorescence Analysis of Mebendazole and Related Imidazoles

Abstract

Native low-temperature phosphorescence of mebendazole and flubendazole in ethanol is used for the determination of these imidazoles in anthelmintic preparations with wavelength maxima and detection limits of λ_EXC = 322 nm, λ_EM = 454 nm; 10 ng ml^?1 and λ_EXC = 325 nm, = λ_EM = 455 nm; 5 ng ml^?1, respectively, with linear response up to 8 μg ml^?1 and 9 μg ml^?1, respectively. The structural basis of these phenomena is discussed for both compounds and for related imidazoles and benzimidazoles. Apart from good sensitivity and excellent specificity offered by the technique, the use of cryogenic equipment (liquid nitrogen, special cuvettes, expensive dewar cells) implies some disadvantages for routine analyses.     

Biimidazol-2-yl–BF2 complexes

Nonfluorescent 4,4′,5,5′-tetramethyl- and 4,5,4′,5′-bistetramethylene biimidazol-2-yls 5 and 6 combined with boron trifluoride to give the tetramethyl and bistetramethylenebiimidazol-2-yl–BF₂ complexes 9 and 10 isolated as strongly fluorescent BF₃ salts, λ_f (dichloromethane): 377 nm Φ 0.93 and 386 nm Φ 0.90. Similarly, fluorescent bibenzimidazol-2-yl 7 , λ_f (ethanol), 370 nm Φ 0.14, gave a BF₂ complex 11 isolated as a BF₃ salt λ_f (ethanol), 417 nm Φ 0.68.     

Stopped-flow injection determination of copper(II) at the ng ml−1 level

A stopped-flow injection method for the determination of copper(II) in the range 0.2–300 ng ml^?1 is proposed, based on the catalytic effect of this ion on the 2,2'-dipyridylketone hydrazone/hydrogen peroxide reaction. The oxidation product shows an intense blue fluorescence that is monitored at λ_ex = 350 nm, λ_em = 427 nm. The sampling rate (72 h^?1), r.s.d. (1.4%) and the lack of interference from most foreign ions, allowed application of the method to the determination of copper in foods and blood serum.     

Highly near‐infrared emissive boron di(iso)indomethene‐based polymer: Drastic change from deep‐red to near‐infrared emission via quantitative polymer reaction

It is challenging to realize the near‐infrared (NIR) emission with large brightness and sharp spectra from the conjugated polymers. In this study, we demonstrate the strategy for receiving strong and pure NIR emission from polymeric materials using organoboron complexes and the modification after polymerization. A series of NIR emissive conjugated polymers with boron di(iso)indomethenes (BODINs) and fluorene or bithiophene were synthesized by Suzuki–Miyaura coupling reaction. The obtained polymers exhibited high emissions in the range from deep‐red to NIR region (quantum yields: ?_PL = 0.40–0.79, full width at half maximum height: Δλ_1/2 = 660–940 cm^?1, emission maxima: λ_PL = 686–714 nm). Next, the demethylation of the BODIN‐based polymer with o‐methoxyphenyl groups was carried out. The transformation of the polymer structure quantitatively proceeded via efficient intramolecular crosslinking through the intermediary of the boron atom. Finally, the resulting polymer showed both drastically larger red‐shifted and sharper photoluminescence spectrum than that of the parent polymer with deep‐red emission (?_PL = 0.37, Δλ_1/2 = 460 cm^?1, λ_PL = 758 nm). © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

A Fluorimetric Method for the Determination of Atmospheric Sulphur Dioxide With 2′, 7′—Dichlorofluorescein∗

Abstract

A rapid, simple and sensitive fluorimetric method has been developed for the determination of atmospheric sulphur dioxide with dichlorofluorescein as fluorogenic reagent (λ_ex = 505 nm, λ_em = 520 nm) at pH 4.0–6.0. A linear calibration curve was obtained in the range 0.01–0.40 μg SO₂/25 ml. The detection limit is 0.01 μg SO₂/25 ml. Nitrogen dioxide does not interfere with the method. The method was successfully applied to the determination of atmospheric sulphur dioxide.

     

A Fluorimetric Method for the Determination of Cyanide with Fluorescein and Iodine∗

Abstract

A rapid, simple and sensitive fluorimetric method has been developed for the determination of cyanide with fluorescein as fluorogenic reagent (λ_ex = 494 nm, λ_em = 514 nm) at pH 6.0–7.0. A linear calibration curve was obtained in the range 0.004–2.0 μg CN^?/25 ml. The detection limit is 0.004 μg CN^-/25 ml. The method was successfully applied to the determination of cyanide in waste water.

     

Photolysis of Fe(CO)42− in an aqueous NaOH glass at 77 K. formation of solvated electrons

The photolysis of [Fe(CO)₄]²⁻ in 10 M NaOH glass at 77 K leads to the formation of solvated electrons with θ = 0.03 at λ_irr = 254 nm. The solvated electrons, which are stable under these conditions, are identified by their characteristic absorption band at λ_max = 588 nm.     

Extract-Photometric Determination of Vanadium with Isophthaldihydroxamic Acid

Abstract

The spectrophotometric study of violet complex isophthaldihydroxamic acid-vanadium extracted into solution of trioctylmethylammonium chloride in ethylacetate was made (λ_max = 380 nm, ? = 7500 l.mol^?1.cm^?1; λ_max = 510 nm, ? = 5510 l.mol^?1 .cm^?1; stoichiometries, 1:1 and 1:2, V:reagent). A new method for the extract-spectrophotometric determination of V(V) in the range 14–80 μg of vanadium is proposed.     

Syntheses,Crystal Structures and Photophysical Properties of a Series of Cadmium(II) Coordination Polymers

Three cadmium(II) coordination polymers [Cd(NA)₂(H₂O)₂]_n ( 1 ), {[Cd(NA)(phen)(NO₃)]·(H₂O)_1/2}_n ( 2 ), {[Cd(NA)(CH₃C₆H₄COO)(H₂O)₂]·(CH₃C₆H₄COOH)}_n ( 3 ) (HNA = nicotinic acid, phen = 1, 10‐phenanthroline) have been synthesized by hydrothermal method. Their single‐crystal structures were determined by X‐ray diffractometry. The absorption, excitation and emission spectra were investigated and all the complexes emit strong fluorescence: λ^em_max = 544 nm (λ^ex = 492 nm), 1 ; λ^em_max = 466 nm (λ^ex = 393 nm), 2 ; λ^em_max = 430 nm (λ^ex = 313 nm), 3 . At room temperature in the solid state the fluorescence lifetimes of the complexes were investigated and the relationships between the spectra were discussed as well as the connections of luminescence and crystal structures.     

Time-resolved emission studies of poly(n-v1nyl carbazole) using pulsed laser excitation

Time-resolved fluorescence spectroscope of poly(N-vinyl carbazole) in tetrahydrofuran solution has revealed the presence of three emitting species, namely a normal excimer emitting at λ_max = 420 nm, a higher-energy excimer site at λ_max = 370 nm which interconverts with the “normal” site, and a third species which emits at 370 nm but not at 420 nm. and which does not convert to the normal excimer. The identity of this species, and the kinetics of fluorescence of the polymer, are discussed.     

Selective side-chain oxidation of peralkylated pyrromethene?BF2 complexes

Treatment with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) oxidized 2,6-diethyl-1,3,5,7,8-pentamethylpyrromethene–BF₂ complex 1 , 13,14-trimethyl-2, 3, 4, 5,9,10,11,12-octahydroindomethene–BF₂ complex 5 , and 1,3,5,7,8-pentamethyl-1,2,3,5,6,7-hexahydropyromethene–BF₂ complex 8 to the weakly fluorescent 3-formyl, 5-oxo, and 8-formyl derivatives 4 , 6 , and 9 , respectively. The dye 1 was oxidized by lead tetraacetate to 1,7,8-trimethyl-2,6-diethyl-3,5-diacetoxymethylpyrromethene–BF₂ complex 12 [λ_f (ethanol) 538 nm, Φ 0.62, λ_las (ethanol) 555–570 nm]. Catalytic reduction (Pd/C) converted the aldehyde 4 to 2,6-diethyl-3-hydroxymethyl-1,5,7,8-tetramethylpyrromethene–BF₂ complex 10 [λ_f (ethanol) 537 nm, Φ 0.70, λ_las (ethanol) 547–575 nm].     

Selective determination of pentoses,hexoses and 6-deoxyhexoses by dual-wavelength spectrophotometry with the cysteine—phenol—sulfuric acid system

A convenient method is described for the selective determination of pentoses, hexoses and 6-deoxyhexoses by dual-wavelength spectrophotometry with the l-cysteine—phenol—sulfuric acid system. Excellent linearity was observed for 25–250 nmol of pentoses, and for 25–500 nmol of hexoses and 6-deoxyhexoses. These aldoses in those sample ranges could be determined selectively with high accuracy and precision by the k -factor mode. The appropriate, wavelength of λ₂ was 462, 499 and 398 nm for pentoses, hexoses and 6-deoxyhexoses, respectively, whereas that of λ₁ was commonly 424 nm.     

Enzymatic determination of cholesterol, l-amino acids and linoleic acid with a novel redox indicator system

A sensitive kinetic fluorimetric system is proposed for the determination of hydrogen peroxide produced by enzymatic oxidation of cholesterol, l-amino acids and linoleic acid. 2-Hydroxynaphthaldehyde thiosemicarbazone (HNTS) is oxidized by hydrogen peroxide or hydroperoxides in an ammoniacal medium in a Mn(II)-catalyzed reaction to give a fluorescent product (λ_ex = 390 nm, λ_em = 450 nm). The lowest concentration of hydrogen peroxide determined is 50 pmol. Cholesterol was determined in egg yolk, cod liver oil and horse serum. The ranges of concentration for substrates were 0.33–3.74 μM cholesterol; 0.3–10 μM, 0.6–15 μM and 0.75–10 μM, for l-leucine, l-phenyalanine and l- serine, respectively; and 15–150 μM linoleic acid.     

A novel and efficient excitation- and ionization-scheme for laser resonance ionization of mercury

A novel, efficient scheme for mercury atomic resonance ionization is proposed and experimentally studied with wavelengths λ₁=254 nm, λ₂=313 nm and λ₃=626 nm. The cross-sections of mercury photoionization from different excited states were estimated using a new imaging method of resonance ionization signal measurement. Almost 100% efficiency of Hg resonance ionization was achieved using the first harmonic of a dye laser at 626 nm to ionize mercury atoms excited into the 6³D₂ state. The photoionization cross-section from this state was found to be 1.5×10⁻¹⁸ cm². Suppression of the ionization signal by coherent effects (electromagnetically-induced transparency) and the efficiency of resonance ionization were also studied.     

New water-soluble hydrogen donors for the enzymatic spectrophotometric determination of hydrogen peroxide

Eight N -alkyl-N-V-sulphopropylaniline derivatives have been synthesized and assessed as water-soluble hydrogen donors for the spectrophotometric determination of hydrogen peroxide in the presence of peroxidase. The sodium salts of N-ethyl-N-sulphopropylaniline (ALPS), N-ethyl-N-sulphopropyl-m-toluidine (TOPS) and N -ethyl-N-sulphopropyl-m-anisidine (ADPS) are recommended. They have excellent water solubilities, and the optimum pH range for oxidative condensation with 4-aminoantipyrine in the presence of hydrogen peroxide and peroxidase is 5.5–9.5. The absorbances of the resulting chromogens are 2–3 times higher than that achieved with phenol. The molar absorptivities of the chromogens with 4-aminoantipyrine are 41300 (ALPS, λ_max 561 nm), 37400 (TOPS, λ_max 550 nm) and 27900 (ADPS, λ_max 540 nm). Calibration graphs for the determination of hydrogen peroxide in the presence of a control serum are linear for 7–40 × 10^-6 mol H₂O₂ l^-1.     

Absorption spectrum,lifetime and reactivity of the excited triplet state of dimesitylcarbene

The first excited triplet state of dimesitylcarbene has been generated in solution at room temperature. It has a lifetime of 60 ns and shows fluorescence with λ_max = 501 nm and absorption with λ_max = 360 nm. This species is quenched by oxygen and carbon tetrachloride with rate constants of (4.4 ± 0.8) × 10¹⁰ and (7.3 ± 0.6) × 10⁹ M⁻¹ s⁻¹, respectively.