Macrocyclization by ring-closing metathesis in the total synthesis of natural products: reaction conditions and limitations

The construction of macrocycles by ring-closing metathesis (RCM) is often used as the key step in the synthesis of natural products containing large rings. This reaction is attractive because of its high functional group compatibility and the possibility for further transformations. The finding of suitable reaction conditions is critical for the success of the synthesis. In this Minireview we summarize the efforts of many research groups to develop efficient RCM reactions on their way towards the total synthesis of natural macrocyclic products. Their findings should help in future synthesis to reduce the time-consuming phase of the optimization of the reaction conditions.     

Formal synthesis of valienamine using ring-closing metathesis

(1R,2S,3S,4R)-2,3,4-Tri-O-benzyl-5-(benzyloxymethyl)-cyclohex-5-ene-1,2,3,4-tetrol, a precursor of the α-glucosidase inhibitor, valienamine, was synthesised in eight steps from tetrabenzyl glucose. The key steps were the selective protection of an open-chain diol, and the formation of the cyclohexene ring by ring-closing metathesis with the trisubstituted olefin of valienamine correctly in place.     

Facile synthesis of (−)-6-acetoxy-5-hexadecanolide by size-selective ring-closing/cross metathesis

A total synthesis of (−)-6-acetoxy-5-hexadecanolide, in six steps and 37% overall yield from (2R,3S)-1,2-epoxy-4-penten-3-ol is reported. The key synthetic step is a size-selective ring-closing/cross metathesis reaction in which lactone formation and alkyl chain extension are accomplished in an efficient one-pot process.     

Mechanistic insights into ring-closing enyne metathesis with the second-generation Grubbs-Hoveyda catalyst: a DFT study

The full catalytic process (precatalyst activation, propagating cycle and active-species interconversion) of the ring-closing enyne metathesis (RCEYM) reaction of 1-allyloxy-2-propyne with the Grubbs-Hoveyda complex as catalyst was studied by B3LYP density functional theory. Both the ene-then-yne and yne-then-ene pathways are considered and, for the productive catalytic cycle, the feasibility of the endo-yne-then-ene route is also explored. Calculations predict that the ene-then-yne and yne-then-ene pathways proceed through equivalent steps, the only major difference being the order in which they take place. In this way, all alkene metathesis processes studied here involve four steps: olefin coordination, cycloaddition, cycloreversion and olefin decoordination. Among them, the two more energetically demanding ones are the olefin coordination and decoordination steps. The reaction of the alkyne fragment consists of two steps: alkyne coordination and alkyne skeletal reorganization, the latter of which has the highest Gibbs energy barrier. Comparison between the ene-then-yne and yne-then-ene pathways shows that there is no clear energetic preference for either of the two processes, and thus both should be operative when unsubstituted enynes are involved. In addition, although the endo orientation is computed to be slightly disfavored, it is not ruled out for 1-allyloxy-2-propyne, and thus calculations seem to indicate that the exo versus endo selectivity is strongly influenced by the presence of substituents in the reagent.     

Catalysts for new tasks: preparation and applications of tunable ruthenium catalysts for olefin metathesis

A continuous survey across structures, made over the past decades, has led to the development of highly active olefin metathesis catalysts for sophisticated synthetic tasks and for polymer technology. In this paper, our efforts toward novel and improved ruthenium complexes with even better performance in olefin metathesis are described. Oxygen ether derivatives 3, pioneered by Hoveyda, exhibit high activity and possess excellent functional group tolerance. We have successfully fine-tuned catalyst 3b to increase its activity and applicability by the introduction of electron-withdrawing groups to diminish the donor properties of the oxygen atom. As a result, the stable and easily accessible nitro-substituted catalyst 6 has found a number of successful applications in various research and industrial laboratories. We were intrigued by the possibility to further fine-tune the Hoveyda-type catalysts by combining two activating effects-steric and electronic-in a single catalyst. This was possible to achieve in so-called scorpio carbenes, which are currently under investigation in our laboratory. These modifications can be used not only to control the catalyst activity, but also to alter its physical-chemical properties, such as solubility in a given medium or an affinity to silica gel. An example of immobilization strategy based on this concept is presented.     

Total synthesis of aspinolide B: a ring-closing metathesis approach

A highly convergent stereoselective total synthesis of aspinolide B, a 10-membered lactone is described. The key step includes a ring-closing metathesis reaction to construct the 10-membered ring and the E—olefinic moiety. d-Mannitol was used as a chiral pool material for the construction of the key fragments—the olefinic acid and the olefinic alcohol moieties.     

The pivotal role of symmetry in the ruthenium-catalyzed ring-closing metathesis of olefins

The synthesis of Ru-based precatalysts with N-heterocyclic carbene (NHC) ligands bearing syn- and anti-methyl groups on the NHC backbone and aryl N-substituents with differing steric bulk was carried out. The catalytic behavior of the monophospine Ru precatalysts (7a, 7b, 8a, and 8b) was compared to the corresponding family of phosphine-free catalysts (9a, 9b, 10a and 10b) in the ring-closing metathesis (RCM) of olefins. These catalysts showed high efficiency in RCM reactions and the syn-isomers 7a and 9a, in particular, proved to be among the most active catalysts in the formation of tetrasubstituted olefins through RCM. DFT studies on the entire RCM catalytic cycle of hindered olefins were performed to rationalize the different behaviors of catalysts with syn- and anti-methyl groups on the NHC backbone. Theoretical results not only disclosed how NHC symmetry influences the overall activity of the catalyst, but also gave relevant and more general indications on the crucial steps of the RCM of olefins.     

Microwave-assisted ring-closing metathesis of diallylamines: a rapid synthesis of pyrrole and pyrroline derivatives

The ring-closing metathesis (RCM) reactions of diallylamines occurred under controlled microwave irradiation. In addition to the high reaction rate, the key features of the reaction are that it can be carried out without deactivation of the substrates and without the use of Lewis acids.     

A quadruple ring-closing metathesis reaction in the synthesis of bis-spirocyclic compounds: extending the scope of metathesis chemistry

The first example of a quadruple ring-closing metathesis reaction is reported. The reaction of the C2 symmetric octaene 3 afforded bis-spirocyclic compounds in high yield.     

Novel metathesis catalysts based on ruthenium 1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidenes: synthesis, structure, immobilization, and catalytic activity

The synthesis of novel ruthenium-based metathesis catalysts containing the saturated 1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene ligand, that is, [RuCl2(NHC)[=CH-2-(2-PrO)-5-NO(2)-C6H3]] (1) and [Ru(CF3COO)2(NHC)[=CH-2-(2-PrO)-5-NO2-C6H3]] (2) (NHC=1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene) is described. Both catalysts are highly active in ring-closing metathesis (RCM) and ring-opening cross-metathesis (ROCM). Compound 1 shows moderate activity in enyne metathesis. Compound 2 is not applicable to enyne metathesis since it shows high activity in the cyclopolymerization of diethyl dipropargylmalonate (DEDPM). Poly(DEDPM) prepared by the action of 2 consists of 95% five-membered rings, that is, poly(cyclopent-1-enevinylene)s, and 5 % of six-membered rings, that is, poly(cyclohex-1-ene-3-methylidene)s. The polymerization proceeds in a nonliving manner and results in polyenes with broad polydispersities (1.9< or =PDI< or =2.3). Supported analogues of 2 were prepared by immobilization on hydroxymethyl-Merrifield resin and a monolithic support derived from ring-opening-metathesis polymerization (ROMP). Catalyst loadings of 1 and 2.5%, respectively, were obtained. Both supported versions of 2 showed excellent reactivity. With 0.24-2% of the supported catalysts, yields in RCM and ROCM were in the range of 76-100%. Leaching of ruthenium was low and resulted in Ru contaminations of the products of less than 0.000014% (0.14 ppm).     

Formal total synthesis of camptothecin via ring-closing metathesis strategy

A formal total synthesis of camptothecin 1 is presented. The key steps include construction of the D-ring of camptothecin featuring an efficient ring-closing metathesis (RCM) reaction and the subsequent Michael addition of nitropropane across the double bond of the dihydropyridone 3.     

Ruthenium olefin metathesis catalysts with modified styrene ethers: influence of steric and electronic effects

A series of olefin metathesis catalysts with modified isopropoxybenzylidene ligands were synthesised, and the effects of ligands on the rate of metathesis investigated. Increased steric hinderance ortho to the isopropoxy group enhanced reaction rates. In the case of N-heterocyclic carbene complexes, decreasing electron density at both the chelating oxygen atom and the RuC bond accelerated reaction rates appreciably. Catalysts containing a tricyclohexylphosphane ligand, followed the same trend with regard to benzylidene electrophilicity, while higher electron density at oxygen enhanced reaction rates.     

Total synthesis of the terpenoid buddledone A: 11-membered ring-closing metathesis

The first total synthesis of buddledone A was accomplished in seven steps from methyl ethyl ketone (MEK). The key step in the sequence featured an 11-membered ring formation by ring-closing metathesis.     

Ruthenium-based olefin metathesis catalysts coordinated with unsymmetrical N-heterocyclic carbene ligands: synthesis, structure, and catalytic activity

A series of ruthenium-based olefin metathesis catalysts coordinated with unsymmetrical N-heterocyclic carbene (NHC) ligands has been prepared and fully characterized. These complexes are readily accessible in one or two steps from commercially available [(PCy(3))(2)Cl(2)Ru==CHPh]. All of the complexes reported herein promote the ring-closing of diethyldiallyl and diethylallylmethallyl malonate, the ring-opening metathesis polymerization of 1,5-cyclooctadiene, and the cross metathesis of allyl benzene with cis-1,4-diacetoxy-2-butene, in some cases surpassing in efficiency the existing second-generation catalysts. Especially in the cross metathesis of allyl benzene with cis-1,4-diacetoxy-2-butene, all new catalysts demonstrate similar or higher activity than the second-generation ruthenium catalysts and, most importantly, afford improved E/Z ratios of the desired cross-product at conversion above 60 %. The influence of the unsymmetrical NHC ligands on the initiation rate and the activation parameters for the irreversible reaction of these ruthenium complexes with butyl vinyl ether were also studied. Finally, the synthesis of the related chlorodicarbonyl(carbene) rhodium(I) complexes allowed for the study of the electronic properties of the new unsymmetrical NHC ligands that are discussed in detail.