环氧乙烷环氧丙烷开环聚合反应动力学研究

环氧乙烷和环氧丙烷由于具有较高的环张力,因而容易发生开环聚合。本文综述了环氧乙烷合环氧丙烷开环聚合反应的动力学研究进展,考察了环氧乙烷和环氧丙烷开环聚合反应的机理,分别讨论了各类催化剂体系中环氧乙烷和环氧丙烷开环聚合的动力学常数、两者的竞聚率及开环聚合产物的分子量分布,并指出了开环聚合反应动力学研究对于环氧乙烷和环氧丙烷的开环聚合研究及工业应用的重要性。     

微波辐射下环氧乙烷的开环聚合研究

在微波辐射下,选择不同的阴离子引发剂使环氧乙烷开环聚合,缩短了反应时间。用VPO及GPC测定了聚合物的分子量及其分布。     

稀土络合催化环氧乙烷聚合

以稀土化合物-二(2-乙基己基)膦酸钕[Nd(P_(204)_3],三异丁基铝和水组成的络合催化剂,引发环氧乙烷聚合.结果表明,稀土络合催化剂是制备高分子量聚环氧乙烷的新型催化剂.聚合反应速度与环氧乙烷浓度呈一级关系,与Nd(P_(204))_3浓度呈一级关系.聚合的总活化能E_α=33.8kJ/mol,表观速率常数K_p=1.67×10~(-3)s~(-1)·mol~(-1)·1     

环氧乙烷环氧丙烷共聚醚的研究进展

综述了环氧乙烷环氧丙烷共聚醚的聚合机理聚合工艺及其应用.环氧乙烷环氧丙烷共聚醚的聚合按其催化剂体系的机理可以分为阴离子聚合、阳离子聚合和配位聚合三类,其中阳离子聚合应用较少.在环氧乙烷和环氧丙烷开环聚合生成共聚醚的反应中,不同的反应工艺条件对生成的聚醚有着很大的影响.同样比例的环氧乙烷和环氧丙烷,因聚合反应器设计、反应器种类、起使剂种类催化剂种类与用量温度加料方式端基结构等的不同,所合成的共聚醚会产生不同的结构和性能.环氧乙烷环氧丙烷共聚形成的聚醚可以分为嵌段共聚醚和无规共聚醚两类.其中,嵌段共聚醚可以分为EPE和PEP两类.     

Fe—Al配位催化环氧丙烷均聚

用于环氧丙烷开环聚合的催化剂为有机金属化合物和稀土络合物等,在对于铁系催化剂催化丁二烯聚合、马来酸酐与苯乙烯共聚和邻苯二甲酸酐与环氧丙烷共聚的研究基础上,我们首次将这一类催化剂用于环氧化物的开环均聚上,发现Fe(acac)3-Al(i-Bu）3催化剂具有良好的催化活性,并进行了产物结构和反应动力学的研究,结构分析表明Fe(acac)3-Al(i-Bu）3催化剂体系具有良好的立体定向性。     

稀土催化四氢呋喃开环聚合

1937年Meerwein首次发现Et_3O~(+BF)可催化四氢呋喃(THF)开环聚合。到目前为止,发现能使THF开环聚合的催化剂有质子酸、Lewis酸、洋离子、正碳离子等。1990年吴健等将(Acac)_3Nd-(i-Bu)_3Al-H_2O-环氧氯丙烷催化体系应用于THF聚合,发现它和(i-Bu)_3Al-H_2O-环氧氯丙烷体系具有相同的活性,这说明稀土配合物没有参与活性中心的形成。本工作发现(CF_3CO-2)3Ln(Ln=Y,La,Ce,     

稀土络合催化炔烃和开环聚合新进展

本文综述了我国首创开拓的稀土络台催化聚合在炔烃和开环聚合方面的新进展.用稀土络合催化剂可以使乙炔、苯乙块在室温下聚合制备高顺式含量和抗氧化稳定性良好的聚炔烃膜;可以使环氧乙烷、环氧丙烷、环氧氯丙烷和环硫丙烷聚合制备高分子量聚合物;可以使丙交酯聚合制备可控分子量聚合物.     

原位核磁研究环氧丙烷的开环聚合反应动力学

利用原位~1H-NMR(400MHz)和~(13)C-NMR(100MHz)研究了环氧丙烷在TPPAlCl催化剂上开环聚合的动力学行为,包括反应级数、聚合反应速度常数、反应活化能以及活性中心数目、聚合物链的平均长度和聚合物的立规度等。 本方法的特点是原位、简单、快速和信息量丰富,是定性和定量分析及动力学研究的有效的现代测量方法之一。     

环氧乙烷和环氧丙烷共聚体系的等温结晶和熔融

环氧乙烷（ＥＯ）和环氧丙烷（ＰＯ）共聚体系的等温结晶前期符合Ａｖｒａｍｉ方程。ＰＯ组分含量增加，Ａｖｒａｍｉ指数ｎ值由１．８到２．４，体系的结晶生长速率与共聚体系的组成和结晶度有关，ＥＯ／ＰＯ共聚体系的平衡熔点随ＰＯ含量的增加而降低。随Ｔｃ增大，△Ｈｍ与△Ｓｍ呈线性降低。     

双金属氰化物络合物催化环氧烷烃开环聚合的特征

合成了Co Zn双金属氰化物 (DMC)络合物催化剂 ,以X 射线衍射、元素分析、红外光谱等手段进行了表征 ,考察了该催化体系下环氧丙烷开环聚合的反应特性 ,并初步探讨了聚合反应的机理 .研究发现 ,Co Zn双金属氰化物催化剂具有很高的催化活性 ,适合于中高分子量聚醚的合成 ,但是碱性起始剂起阻聚作用 ;在该催化体系下聚合物分子量可控 ,不饱和度很低 (<0 .0 14meq g) ,分批加料聚合所得到的聚合物分子量分布较窄 (Mn Mw <1.4 ) ,而一步加料聚合所得到的聚合物分子量分布变宽 ;1 3C NMR分析表明聚合物主链具有无规立构分布的特点 ,且链节分布几乎都为头 尾方式 .聚合过程中活性链与非活性链之间可能存在一个交换反应 ;虽然聚合反应有终止 ,但与聚合物链长没有关系 ,聚合物链的终止是可逆的 .     

丙交酯开环均聚合

生物可降解脂肪族聚酯--聚丙交酯由可再生资源获得.聚丙交酯独特的物理性质使得它在包装、涂层、纤维、薄膜等方面有着广泛的应用.聚丙交酯低成本、大规模的生产及应用将极大地减轻对石油产品的依赖.高分子量的聚丙交酯主要由丙交酯开环聚合制备.本文总结了催化丙交酯开环聚合的3大类催化剂及其反应机理;综述了近年来国内外在丙交酯均聚合催化剂开发上的研究进展,并重点论述了稀土催化剂在丙交酯开环聚合中的优势及由其催化合成的聚丙交酯在生物学应用中的优点.     

Synthesis of Polynorbornene-Poly(ethylene-co-propylene)Diblock Copolymer

IntroductionSincethefirstexampleofobtaininglivingpolymersfrompolymerizations0fstyreneandisoprenebyusingsodiumnaphthenateasananionicinitiat0rwasdiscl0sedinl956bySzwarc',avarietyoftailoredblockcopolymershavebeensynthesized.Livingpolymerizati0ncanbeappliedtoprepareblockcopolymerswithawiderangeofpropertiesnotattainablewithhom0polymersorrandomcopolymers'.Duringtherecentdecade,thesynthesesofwell-definedtransition-metalalkylidenec0mPlexes"'haveprovidedeffectivecatalystsforlivingring-openingmetathesi…     

Glycidyl Tosylate: Polymerization of a “Non‐Polymerizable” Monomer permits Universal Post‐Functionalization of Polyethers

Glycidyl tosylate appears to be a non‐polymerizable epoxide when nucleophilic initiators are used because of the excellent leaving group properties of the tosylate. However, using the monomer‐activated mechanism, this unusual monomer can be copolymerized with ethylene oxide (EO) and propylene oxide (PO), respectively, yielding copolymers with 7–25 % incorporated tosylate‐moieties. The microstructure of the copolymers was investigated via in situ ¹H NMR spectroscopy, and the reactivity ratios of the copolymerizations have been determined. Quantitative nucleophilic substitution of the tosylate‐moiety is demonstrated for several examples. This new structure provides access to a library of functionalized polyethers that cannot be synthesized by conventional oxyanionic polymerization.     

Anion ring-opening polymerization of ethylene oxide by initiation of sodium 4-amino-N-(2-pyrimidinyl)benzene sulfonamide and influence of moisture on polymerization

Polyethylene oxide with sulfadiazine and hydroxyl end groups (PEOsf) were prepared by anion ring-opening polymerization of ethylene oxide initiated by sodium 4-amino-N-(2-pyrimidinyl)benzene sulfonamide (SF-Na). The product was characterized in detail by NMR, IR, GPC and DSC. Its molecular weight and molecular weight distribution are in the range of 1200-1 500 and 1.04-1.06 respectively, and the latter is nearly monodistribution. The trace of the moisture from air could accelerate the polymerization, and the mechanism is discussed.     

CO2和环氧乙烷直接制备碳酸乙烯酯的研究进展

本文综述了利用CO₂和环氧乙烷（EO）直接催化合成碳酸乙烯酯（EC）的研究进展,详细讨论了各种催化剂活化EO和CO₂,完成环加成反应的催化机理,并展望了该领域的研究前景。     

Triisobutylaluminum as cocatalyst for zirconocenes. II. Triisobutylaluminum as a component of a cocatalyst system and as an effective cocatalyst for olefin polymerization derived from dimethylated zirconocenes

An investigation of the catalytic behavior of the dimethylated zirconocenes Me₂SiCp*N^tBuZrMe₂ [Cp* = C₅(CH₃)₄; 1Me ], Me₂SiCp₂ZrMe₂ ( 2Me ), Cp₂ZrMe₂ ( 3Me ), Ind₂ZrMe₂ ( 4Me ), Me₂SiInd₂ZrMe₂ ( 5Me ), Et(2-MeInd)₂ZrMe₂ ( 6Me ), and Me₂Si(2-MeInd)₂ZrMe₂ ( 7Me ) with the combined activator triisobutylaluminum (TIBA)/CPh₃B(C₆F₅)₄ (Al/Zr = 250; B/Zr = 1) in ethylene polymerizations at increased monomer pressures (5–11 bar, 30 °C) was carried out. Sterically opened zirconocenes in ternary catalysts gave rise to active species effective in the formation of low molecular weight polyethylenes (PEs). These active species tended to increase the PE molecular weight [ 1Me (2100) < 2Me (20,000) < 5Me (89,000) < 3Me (94,500)] under similar conditions. PE obtained with 4Me showed a bimodal gel permeation chromatography curve with a 64% peak area [weight-average molecular weight (M_w) = 43,000] and a 36% peak area (M_w = 255,000). The increase in sterical demands from the zirconocenes was also demonstrated by the reduction of the chain transfer to monomer, the reinsertion of vinyl-ended PE chains, and their ability for isomerization. These reactions were most pronounced for the zirconocenes 1Me and 2Me . The active species responsible for the formation of low molecular weight PEs deactivated quickly. The zirconocenes 6Me , 7Me , and (2-PhInd)₂ZrMe₂ ( 8Me ) bearing substituent at the 2-position of the indenyl ring was activated with TIBA alone, yielding active species effective in ethylene and propylene polymerizations. PEs formed with 6Me – 8Me complexes activated with TIBA had high molecular weights. An increase in the Al/Zr ratio in the catalytic system 8Me /TIBA from 50 to 300 led to an enhancement of the molecular weight of polypropylene (PP) samples from oligomeric products to an viscosity-average molecular weight of 220,000. The increase in the molecular weights of PPs with an increase in the propylene concentration was also observed. An analysis of the catalytic performance of the 8Me /TIBA system showed first-order dependency of the initial polymerization rates on the TIBA concentration and close to second-order dependency on propylene. The second-order dependency on the monomer concentration is explained in terms of the monomer participation in the initiation step of the polymerization reaction. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1915–1930, 2001     

Ring-Opening Polymerization of Ethylene Carbonate Catalyzed with Ionic Liquids: Imidazolium Chloroaluminate and Chlorostannate Melts

Ring-opening polymerization of ethylene carbonate in the presence of ionic liquids, 1-butyl-3-methylimidazolium chloroaluminate melt and 1-butyl-3-methylimidazolium chlorostannate melt, has been investigated. Polymerization takes place accompanied with decarboxylation even at temperatures below 100°C under the reaction conditions selected to give poly(ethylene ether-carbonate)s.     

乙酰丙酮钇催化环氧氯丙烷的均聚合与共聚合

用过渡金属络合催化剂聚合环氧氯丙烷能获高分子量的聚合物。稀土络合催化剂对环氧乙烷,环氧丙烷及环硫丙烷的开环聚合具有明显效果。本文选用Y(acac)_3-H_2O-Al(i-Bu)_3催化剂,考察环氧氯丙烷的均聚合及其与环氧乙烷,环氧丙烷的共聚合,并用核     

Ring-opening polymerization of cyclic carbonates by alcohol–acid catalyst

Ring-opening reactions of 1,3-dioxepan-2-one ( 1 ) and 1,3-dioxan- 2 -one (2) with several alcohols were examined. The reactions proceeded without trifluoroacetic acid (TFA) in low conversions, while they proceeded smoothly with TFA to afford the ring-opened adducts and oligomers. Ring-opening polymerizations of 1 and 2 were also carried out by alcohol–acid catalysts to afford the corresponding polycarbonates (M _n = 2500−6800). The molecular weights increased with increase of the conversions of 1 and 2. The observed polymerization rates of 1 and 2 were determined as 24.4 × 10⁻⁶ and 0.8 × 10⁻⁶ s⁻¹, respectively. Mechanistic aspects were studied by NMR spectroscopy. The methylene protons α and β to the carbonate moieties shifted to lower fields in 0.06–0.11 ppm in the ¹H-NMR spectra by the addition of TFA. Downfield shifts of the carbonyl carbon signals of 1 and 2 were observed in 3.94–4.15 ppm in the ¹³C-NMR spectra. These results strongly suggest that the cyclic carbonates are activated by TFA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2463–2471, 1998