Spectrophotometric determination of chromium(III) with 4-(2-thiazolylazo)-resorcinol

Summary The red complex formed between chromium(III) and 4-(2-thiazolylazo)-resorcinol (1 2) at pH 5.0, on heating the reactants to 90° for 45 minutes, is used for Spectrophotometric determination of chromium, the absorbance being measured at 525 nm. Beer's law is obeyed for chromium concentration of 0.06 to 1.1g per ml. Molar absorptivity is 4.98×10⁴ and Sandell sensitivity 0.001g cm^–2. This method has been applied to the determination of chromium content in steel samples.

---

Zusammenfassung Der 1 2-Komplex von Chrom(III) mit 4-(2-Thiazolylazo)resorcin bildet sich bei pH 5,0 und 90° C in 45 min. Er eignet sich zur spektrophotometrischen Chrombestimmung. Die Extinktion wird bei 525 nm gemessen. Das Beersche Gesetz ist zwischen 0,06 und 1,1g Cr/ml erfüllt. Die molare Extinktion beträgt 4,98 · 10⁴, die Empfindlichkeit nach Sandell 0,0001g · cm^–2. Die Methode wurde zur Chrombestimmung in Stahlproben angewandt.

     

Application of principal component-wavelet neural network in spectrophotometric determination of acidity constants of 4-(2-thiazolylazo)-resorcinol

The acidity constants of 4-(2-thiazolylazo)-resorcinol (TAR) were determined by the principal component-wavelet neural network (WNN). Biprotic acid mass balance equations, the distribution functions and the corresponding spectral profiles which were generated by a Gaussian model, have been considered to simulate all required absorbance-pH data. The simulated absorption-pH data matrix was used as training set whereas the TAR absorption-pH data was used as the test set of WNN model. The obtained acidity constants were in good agreement with the reported values of acidity constants in the literature and with those calculated by DATAN software. Artificial neural network (ANN) model has been also employed in this study and the results of WNN were compared with those obtained by ANN. It was found that WNN gives faster convergence and slightly better accuracy.     

Rapid spectrophotometric determination of iron in natural waters with 4-(2-thiazolylazo)-6-chlororesorcinol

4-(2-Thiazolylazo)-6-chlororesorcinol reacts sensitively with iron(II) to form a water-soluble brown complex which has a characteristic absorption at 741 nm. By utilizing this absorption, rapid and selective spectrophotometric determination of iron has been developed. The absorbance is constant at pH 8.7 to 10.9 and Beer's law holds up to 1.8 ppm of iron, with a molar absorptivity of 3.13 × 10⁴ liters mol^?1 cm^?1. Many types of ions are tolerable and the method has been applied successfully to the determination of iron in river waters.     

Rapid spectrophotometric determination of thorium(IV) with 1-(2′-thiazolylazo)-2-naphthol

Thorium(IV) reacts with 1-(2-thiazolylazo)-2-naphthol (TAN) in the presence of antipyrine to form a sparingly soluble red-coloured chelate, soluble in 36% methanol (v/v). Complexation takes place instantaneously at pH 2.4–2.8, maintained by glycine buffer. Antipyrine is found to enhance sensitivity of the complex, which is stable for 19 hours. The 12 complex exhibits maximum absorbance at 555 nm, obyes Beer's law in the concentration range from 0.32 to 6.56 g of thorium(IV) per ml, has a molar absorptivity of 3.14·10⁴ dm³/mol^–1·cm^–1 and a Sandel sensitivity of 7.4 ng·cm^–2. The formation constant (log K) is found to be 8.62 and 8.45. Interference of 57 anions and cations in the determination of thorium(IV) has been studied. From ten repeated determinations, the coefficient of variation was found to be ±0.98%. The method was successfully applied for determination of thorium content in a sample of monazite.     

Extraction and spectrophotometric determination of vanadium with 4-(2-thiazolylazo)resorcinol and tetraphenylarsonium and phosphonium chlorides

Extraction of vanadium-4-(2-thiazolylazo)resorcinol complexes by quaternary salts such as triphenylmethylarsonium iodide, tetraphenylarsonium chloride, and tetraphenylphosphonium chloride has been studied. Quantitative extraction is achieved with tetraphenylarsonium and tetraphenylphosphonium chlorides in the pH region between 3.5 and 5. The optimum conditions for the extraction and spectrophotometric determination of vanadium in the extract are: pH 3.8–4.0, the concentration of vanadium 0.1–0.4 μg/ml. Effective molar absorptivity at λ_max = 555 is (2.55 ± 0.05) × 10⁴ liters mol⁻¹ cm⁻¹. Beer's law is obeyed. Relative standard deviation is 2–10% depending on the concentration level. The composition of the extracted complexes was studied in the solution and in the solid state. For their characterization chemical and spectral evidence and comparison with the vanadium-PAR complexes have been combined.     

Spectrophotometric determination of palladium with 4-(2-pyridylazo)-resorcinol (PAR)

Summary A spectrophotometric method for the determination of palladium is described using 4-(2-pyridylazo)-resorcinol as reagent. The method involves the formation of two red coloured chelates of palladium-PAR at p_H 4.0 and 10.5 respectively. The colour reactions have sensitivity of 0.0085g cm^–2 and 0.0071g cm^–2 for logI ₀/I= 0.001. The effects of p_H, time, order of addition of reagents, temperature etc. have been investigated. The composition of the complexes (metalreagent) have been confirmed by two methods as 11 (at p_H 4.0) and 32 (at p_H 10.5).

---

Zusammenfassung Eine spektrophotometrische Methode zur Palladiumbestimmung mit PAR [4-(2-Pyridylazo)-resorcin] wurde beschrieben. Zwei rotgefärbte Chelate werden bei p_H 4,0 bzw. 10,5 gebildet. Die Empfindlichkeit der beiden Reaktionen beträgt 0,0085 bzw. 0,0071g · cm^–2. Der Einfluß von p_H, Zeit, Reihenfolge der Reagenzien, Temperatur usw. wurde untersucht. Die Zusammensetzung der Komplexe entspricht dem Molverhältnis Pd: Reagens= =11 bei p_H 4,0 bzw. 32 bei p_H 10,5.

     

The solvent extraction and spectrophotometric determination of vanadium (V) with 4-(2-thiazolylazo)resorcinol and tetrazolium salts

The formation and extraction of ion-associate complexes between the vanadium(V)-4-(2-thiazolylazo)resorcinol (TAR) anionic chelate and the cations of some mono-and ditetrazolium salts {3-(4,5-dimethyl-2-thiazol)-2,5-diphenyl-2H-tetrazolium bromide (Thiazolyl blue, MTT), 3-(2-naphtyl)-2,5-diphenyl-2H-tetrazolium chloride (Tetrazolium violet), 2-(4-iodophenyl)-3-(4-nitrophenyl)-5-phenyl-2H-tetrazolium chloride (Iodonitrotetrazolium chloride), 3,3′-[3,3′-dimetoxy(1,1′-biphenyl)-4,4′-diyl]-bis[2,5-diphenyl-2H-tetrazolium] chloride (Tetrazolium blue chloride) and 3,3′-(3,3′-dimetoxy-4,4′-biphenylene)bis[2-(4-nitrophenyl)-5-phenyl-2H-tetrazolium chloride] (Nitro blue tetrazolium chloride)} have been studied. The optimum extraction conditions have been found. The composition of the V-TAR-monotetrazolium and V-TAR-ditetrazolium complexes extracted into chloroform has been determined to be 1:2:3 and 2:4:3 respectively. The extraction, distribution and association constants, and the recovery factors have been calculated. The relationship between the molecular weight of tetrazolium cations, and the association constants of their complexes has been discussed. The special behavior of the tetrazolium cations, containing-NO₂ groups has been noticed. The effects of foreign ions and reagents on the extraction of vanadium with TAR and the best tetrazolium salt-MTT have been studied. A sensitive, selective, simple and fast method for the determination of vanadium has been developed.      

Metal complexes of 4-(2'-thiazolylazo)-resorcinol A comparative study with 4-(2'-pyridylazo)-resorcinol

The acid dissociation constants of 4-(2'-thiazolylazo)-resorcinol (TAR) and the formation constants of the metal complexes formed by this reagent with Cu(II), Ni(II), Co(II), Zn(II) and Mn(II) have been determined potentiometrically at 25° in 50% v/v mixtures of dioxane and water. The values obtained for TAR and the metal complexes are contrasted with similar values for the reagent 4-(2'-pyridylazo)-resorcinol (PAR). Differences and similarities between the co-ordinating tendencies of these two reagents are revealed in terms of the proton displacement constant and the acid dissociation constants of the metal complexes. Evidence is presented which suggests that both TAR and PAR may act as terdentate ligands toward some bivalent metal ions.     

Spectrophotometric determination of thallium with 4-(2-pyridylazo)resorcinol and 4-(2-thiazolylazo)resorcinol

Thallium(III) gives sensitive reactions with PAR and TAR (epsilon = 2 x 10(4) at 520 nm), forming 1:1 complexes at pH approximately 1-2, and a mixture of 1:1 and 1:2 complexes at higher pH values; hydrolysis sets in above pH approximately 3. The stability constants are evaluated.     

The extraction-spectrophotometric determination of chromium(III) with 4-(2-pyridylazo)-resorcinol

The extraction-spectrophotometric determination of chromium(III) with 4-(2-pyridylazo)-resorcinol (PAR) is described. PAR(H₂R) forms a 1:3 complex with chromium(III) in a boiling acetate buffer solution at pH 5. The complex forms an ion-association compound with tetradecyldimethylbenzylammonium ion (TDBA⁺):Cr(R)(HR)₂^--TDBA⁺ which can be extracted into chloroform, the molar absorptivity being 4.7 ·10⁴ at 540 nm. If EDTA is added as a masking agent after the Cr(HR)₃ has been formed, only iron, cobalt and nickel interfere seriously, and the method can be made specific for chromium by a preliminary extraction of these metals with cupferron. The sensitivity of the method is seven times higher than that of the diphenylcarbazide method.     

Extraction—spectrophotometric determination of manganese(II) with xanthates

Manganese(II) (0.04–2 μmol) is extracted into chloroform from an aqueous phase at pH 6.5–9.0, containing a large excess of (n-butyl) xanthate and measured spectrophotometrically at 457 nm. The apparent molar absorptivity is 5.5 × 10³ dm³ mol^-1 cm^-1. The extractability of the manganese complexes decreases in the order n-butyl = benzyl- ? n-propyl- ? ethyl- ? methyl-xanthate. Interfering ions can be removed by a preliminary extraction with ethylxanthate. Ni, Co, Zn, Cd, Pb, Hg(II), Fe(III), As(III), Ce(III), Se(IV), V(V), Mo(VI), and the alkali and alkaline earth metals do not interfere.     

Spectrophotometric determination of niobium in steels with 4-(2-pyridylazo)-resorcinol

A direct method is presented for the spectrophotometric determination of niobium with PAR in mild and alloy steels. Interference is caused only by tantalum and large amounts of copper. A compensating solution is used to correct for coloured ions and for the copper-PAR complex. The method covers the range 0–100 mg of niobium, and Beer's law is obeyed from 0 to 2.0μg Nb/ml. A molar absorptivity of 14,400 at 536 nm was found for the niobium-PAR complex, with a relative standard deviation of ±0.6%.     

Spectrophotometric extractive determination of thiolactams with 4-(2-pyridylazo)-resorcinol and copper

The thiolactams: thiopyrolidon, thiopiperidon, thiocaprolactam, thioenantolactam and thiocaprylolactam form a complex with the ion Cu(II) and PAR in which the ratio Cu:PAR:T1 = 1:2:4. The formation of a ternary complex was used in the spectrophotometric determination of thiolactams in a concentration range of 0.25-4.0 μg/ml thiolactam.     

Multiwavelength spectrophotometric determination of acidity constants of 1-（2-thiazolylazo）-2-naphthol in methanol-water mixtures

The acid-base properties of 1-(2-thiazolylazo)-2-naphthol (TAN) in mixtures of methanol-water at 25℃and an ionic strength of 0.1 mol/L are studied by a multi-wavelength spectrophotometric method.The acidity constants of all related equilibria are estimated using the whole spectral fitting of the collected data to an established factor analysis model DATAN program was used for determination of acidity constants.The corresponding pK_a values in methanol-water mixtures were determined.There is a linear relationship between acidity constants and the mole fraction of methanol in the solvent mixtures.     

用锌-氨三乙酸金属-配位体缓冲溶液和噻唑偶氮间苯二酚流动注射络合滴定镉和铅

1引言流动注射分析随着其理论的日趋完善而不断发展,已在绝大部分分析领域得到应用。Ishibashi等推导出了流动注射酸碱滴定的理论公式,本文作者已将其拓展到络合滴定金属离子中。并用Zn-氨三乙酸（NTA）加座唑偶氮间苯二酚（TAR）滴定Cd和Ph的实验验证了公式的正确性。同时试验了测定Cd、Ph时20多种离子的干扰情况及一些离子的掩蔽方法,结果较为满意。2实验部分2．1主要仪器和试剂LZ-2000型流动注射分析仪和LZ-1040型对数转换器（沈阳肇发自动分析研究所）;721型分光光度计（上海第三分析仪器厂）;XWT-204型台式自动平衡记录仪…