The development of a semiautomated procedure for the synthesis and screening of a large group of molecularly imprinted polymers

A method for synthesis and evaluation of molecularly imprinted polymers (MIPs) on a semiautomated miniature scale is reported. This technique combines molecular imprinting with the combinatorial chemistry approach, allowing rapid screening and optimizations of libraries of MIPs. The polymers were prepared and evaluated in situ by rebinding utilizing powder dispensing and liquid handling systems. MIPs were prepared by a combinatorial approach using methacrylic acid (MAA), 4-vinylpyridine (4-VP), acrylamide, and styrene as functional monomers, and acetonitrile and toluene as porogenic solvents. A drug substance having aromatic, hydroxyl, -O-CONH2 functional groups was selected as the template molecule for this study. The MIP library results demonstrated that the polymer prepared with MAA as functional monomer shows the strongest binding affinity, and therefore, is preferred for the preparation of this particular template molecule. Due to the low consumption of reagents, and more importantly, the demonstrated ability of this method to effectively identify optimal imprinting conditions, this small-scale combinatorial protocol is well suited for fast and efficient screening and optimizations of MIPs.     

印迹聚合物改性多壁碳纳米管固相萃取熊果酸

以聚乙二醇改性的碳纳米管为基质,熊果酸为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,偶氮二异丁腈为引发剂,采用沉淀聚合法成功制备碳纳米管-印迹复合材料.采用红外光谱和扫描电镜研究该复合印迹材料的结构和形貌.结果表明,在碳纳米管表面接枝一层稳定且均匀的印迹材料.采用静态吸附实验研究此印迹材料的吸附性能,...     

Synthesis and Molecular Recognition of Molecularly Imprinted Polymer with Ibuprofen as Template

Ibuprofen and ketoprofen are chemically similar non‐steroidal anti‐inflammatory drugs widely used in the treatment of arthritis. Using a molecular imprinting technique, a simple and rapid method was developed for the simultaneous separation and determination of ibuprofen and ketoprofen. Molecular imprinting introduces artificial binding sites into a synthetic polymer matrix, allowing it to exhibit selective rebinding of template molecules. Imprinted polymers can be regarded as an HPLC stationary phase, important for pharmaceutical analysis. Most molecularly imprinted polymers (MIPs) are synthesized by free radical polymerization of functional monomers, resulting in an excess of crosslinking monomers. In this study, MIPs have been prepared with a ibuprofen template, which can form intramolecular hydrogen bonds. Methacrylic acid (MAA) and ethyleneglycol dimethacrylate (EGDMA) were used as the functional monomer and cross‐linker, respectively. Bulk polymerization was carried out at 4 °C under UV radiation. The resulting MIP was ground into 25?44 μm particles, which were slurry‐packed into analytical columns. Template molecules were removed by methanol‐acetic acid (9:1, v/v). We evaluated the template binding performance of the MIP using HPLC, with ultraviolet (UV) detection at 234 nm. Chromatographic resolution of ibuprofen and ketoprofen on the MIPs were appraised using buffer/acetonitrile (45/55, v/v) as the mobile phase. Results show that the MIPs prepared using ibuprofen as the template had a significant molecular imprinting effect. The method was successfully applied to the separation and analysis of ibuprofen and ketoprofen in pharmaceuticals.     

Selective Removal of the Emerging Dye Basic Blue 3 via Molecularly Imprinting Technique

A molecularly imprinting polymer (MIP) was synthesized for Basic Blue 3 dye and applied to wastewater for the adsorption of a target template. The MIPs were synthesized by bulk polymerization using methacrylic acid (MAA) and ethylene glycol dimethacrylate (EGDMA). Basic Blue 3 dye (BB-3), 2,2′-azobisisobutyronitrile (AIBN) and methanol were used as a functional monomer, cross linker, template, initiator and porogenic solvent, respectively, while non-imprinting polymers (NIP) were synthesized by the same procedure but without template molecules. The contact time was 25 min for the adsorption of BB-3 dye from 10 mL of spiked solution using 25 mg polymer. The adsorption of dye (BB-3) on the MIP followed the pseudo-second order kinetic (k₂ = 0.0079 mg·g⁻¹·min⁻¹), and it was according to the Langmuir isotherm, with maximum adsorption capacities of 78.13, 85.4 and 99.0 mg·g⁻¹ of the MIP at 283 K, 298 K and 313 K, respectively and 7 mg·g⁻¹ for the NIP. The negative values of ΔG° indicate that the removal of dye by the molecularly imprinting polymer and non-imprinting polymer is spontaneous, and the positive values of ΔH° and ΔS° indicate that the process is endothermic and occurred with the increase of randomness. The selectivity of the MIP for BB-3 dye was investigated in the presence of structurally similar as well as different dyes, but the MIP showed higher selectivity than the NIP. The imprinted polymer showed 96% rebinding capacity at 313 K towards the template, and the calculated imprinted factor and Kd value were 10.73 and 2.62, respectively. In this work, the MIP showed a greater potential of selectivity for the template from wastewater relative to the closely similar compounds.     

三甲氧基苄啶分子印迹整体柱的制备及色谱性能

选择甲基丙烯酸为功能单体\, 甲基丙烯酸乙二醇双酯为交联剂, 制备了三甲氧基苄啶分子印迹整体柱, 对整体柱材料的形貌进行了表征, 并且研究了TMP和5种磺胺类药物在分子印迹整体柱上的色谱行为.     

A computational and experimental investigation of the interaction between the template molecule and the functional monomer used in the molecularly imprinted polymer

A computational approach to screening monomer for preparing molecularly imprinted polymer (MIP) was proposed, using the binding energy, ΔE, of a template molecule and a monomer as a measure of their interaction. For a specified template molecule, a monomer of higher ΔE is suitable for preparing the MIP. To examine the validity of this approach, theophylline (THO) was chosen as the template molecule and methacrylic acid (MAA), acrylamide (AA) and 2-(trifluoromethyl)acrylic acid (TFMAA) were as the functional monomers, respectively. Density functional theory (DFT) at B3LYP/6-31+G**//B3LYP/3-21G level was used to calculate ΔE. It was shown that TFMAA gave the largest ΔE while AA gave the smallest. The details of the interaction between the THO with these monomers were also given by this computing approach. The adsorption of THO on the MIP synthesized using different monomers was studied. The MIP synthesized using TFMAA as monomer showed the highest selectivity to THO while the MIP from AA gave the lowest, as predicted from the ΔE calculation. ¹H NMR spectroscopy showed that, compared to MAA and AA, a stronger H-bond interaction is formed between TFMAA and THO. FT-IR analysis of the MIPs prepared using these three monomers confirmed the existence of CO and OH groups, which forms H-bond with THO. The results described above have given an insight into the interaction between THO and the monomers, and shown the use of ΔE to facilitate the selection of monomers for the synthesis of MIP.     

STUDY ON THE NON-COVALENT INTERACTION OF APIGENIN MOLECULARLY IMPRINTED POLYMERS BY SPECTROMETRY

The non-covalent interaction between aPigenin （API） and different functional monomers （α-methylacrylic acid （MAA）, acrylamide （AM）, 2-vinylpyridine （2-Vpy） and combined functional monomers （AM/2-Vpy）） was determined by UV spectrometry, and a series of apigenin molecularly imprinted polymers （API-MIPs） was synthesized with different functional monomers through molecular imprinting technology. The relationship between the non-covalent interaction of template/functional monomer and absorption of MIPs also was studied. The results showed that the order of the strength of the non-covalent interaction between API and different functional monomers in tetrahydrofuran （THF） is as follows： 2-Vpy〉 AM/2-Vpy〉AM〉MAA, which is positive correlation to the absorption capability of corresponding MIPs, and 2-Vpy is the optimum functional monomer among the used monomer for preparing API- MIPs.     

液晶分子印迹整体柱的制备及其分子识别热力学

液晶分子印迹聚合物(MIPs)因刚性液晶单体的加入而在超低交联度水平下也能印迹和识别模板分子,有效解决了传统MIPs因高交联度造成的位点包埋、结合容量低、传质慢等问题。尽管液晶MIPs具有如此独特的优势,但却面临着由于交联度的大幅度降低而导致印迹效果下降的问题。为了研究液晶MIPs的结合特性,制备具有良好印迹效果的低交联液晶MIPs,该文通过二次接枝聚合,制备了一系列不同交联度的液晶分子印迹整体柱,用高效液相色谱法研究了聚合参数与印迹整体柱亲和性的关系。实验中选用三羟甲基丙烷三甲基丙烯酸酯(TRIM)为交联剂,以甲苯和十二醇为致孔剂合成整体柱骨架,并在此基础上以(S)-萘普生为模板,加入液晶单体4-氰基苯基单环己基乙烯(CPCE)进行二次聚合接枝。实验中系统考察了流动相中乙腈比例及缓冲液pH值对色谱保留的影响,结果发现液晶单体的加入使得MIPs对萘普生保留控制机制由原来的氢键作用变为了疏水作用;通过动态吸附实验得到的突破曲线经前沿分析及对吸附等温线Langmuir、Freundlich和Scatchard分析拟合,发现交联度为15%时液晶MIPs印迹因子最大(3.78)、非均一性最强,且特异性吸附量高于非特异性吸附量。液晶MIPs的计量置换模型(SDM-R)分析表明,液晶印迹整体柱对模板分子的总亲和力(ln A=0.645)明显高于其类似物;而从空间匹配程度看,与液晶印迹整体柱空间匹配程度最高的是酮洛芬而非模板分子,但液晶印迹整体柱对酮洛芬的总亲和力(ln A=0.242)不及模板分子的一半,表明在本低交联液晶印迹系统中,空间效应不是决定印迹系统识别能力的主要因素。进一步的分离热力学研究发现,低交联液晶印迹柱的|ΔΔH|<T|ΔΔS|,而交联度为70%的非液晶MIPs柱的|ΔΔH|>T|ΔΔS|,表明液晶MIPs的分离过程是一个熵控制过程,而常规无液晶MIPs的分离过程是一个焓控制过程。上述结果表明,液晶单体的加入改变了MIPs的识别机制,适当的低交联度可显著提高液晶MIPs的识别性能,因此液晶MIPs这些特质有望使其成为新一代的MIPs。     

胆酸印迹聚合物的制备及在含水介质中的结合性能

为了在含水介质中进行有效印迹,本研究中以双甲基丙烯酰-β-环糊精（BMA-β-CD）和2-(二乙基胺基)乙基甲基丙烯酸酯(DEAEM)为功能单体制备了胆酸印迹聚合物MIP1,并用平衡结合实验研究了MIP1在含水介质中对模板分子的识别能力。结果表明,MIP1比单独以BMA-β-CD或DEAEM为功能单体制备的印迹聚合物MIP2和MIP3,显示出对模板分子更好的选择性结合能力。MIP1的特异性吸附量ΔCP为38.81μmol/g,印迹因子IF为2.46。研究表明,在含水介质中,利用模板分子与功能单体之间的疏水作用和离子作用是提高印迹聚合物分子识别能力的关键。研究还表明,在识别过程中,疏水作用在驱动分子进入印迹孔穴时起重要作用。     

Monodispersed, molecularly imprinted polymers for cinchonidine by precipitation polymerization

Three monodispersed, molecularly imprinted polymers (MIPs) for cinchonidine (CD) have been synthesized by precipitation polymerization. MIP1 was prepared using methacrylic acid (MAA) as a functional monomer and divinylbenzene (DVB) as a cross-linker and MIP2 was prepared with further addition of 2-hydroxyethyl methacrylate (HEMA) as a co-monomer. For the preparation of MIP3, core-shell type MIP, monodispersed DVB homopolymers, which are prepared by precipitation polymerization, were used as a core and CD-imprinted MAA-DVB copolymer phases were coated onto the core. Three MIPs synthesized gave monodispersed, spherical beads in micrometer sizes. The binding characteristics and molecular recognition properties of MIP1-3 were examined by Scatchard analysis and chromatographic studies. The association constant of CD with MIP1 was the highest among MIPs prepared, while that with MIP3 was the lowest. The template molecule, CD, was more retained than its stereoisomer, cinchonine, on the three MIPs, and the stereoseparation factor of 38 was obtained with MIP3.     

壬基酚表面印迹聚合物微球的合成及分子识别特性

采用表面分子印迹技术,在二氧化硅微粒表面通过乙烯基三甲氧基硅烷接枝,以壬基酚(NP)为模板、α-甲基丙烯酸为功能单体制备了壬基酚印迹聚合物。扫描电镜及比表面分析仪测试结果表明制备的印迹聚合物呈均匀分散的微球,具有较大的比表面积。采用红外光谱表征印迹聚合物微球制备过程中的化学结构变化情况,并用平衡吸附法研究了聚合物对NP的结合性能与分子识别特性。研究结果表明,聚合物对壬基酚具有良好的结合亲和性,最大结合量可达184.6 mg/g。印迹聚合物对NP的吸附量高于其结构类似物对特辛基酚和双酚A的吸附量,表现出较高的选择性识别能力。     

Sulfonamide imprinted polymers using co-functional monomers

Molecular imprinted polymers (MIPs) prepared using combination of acrylamide (ACM) and 4-vinylpyridine (4-Vpy) as co-functional monomers exhibited efficient recognition properties in both organic and aqueous media as HPLC stationary phase. The results indicate that amide and pyridine groups in functional monomers formed strong hydrogen-bonding interaction with the template molecule, and specific recognition sites were created within the polymer matrix during the imprinting process. When sulfamethoxazole (SMO) was used as template, a MIP prepared in a polar organic solvent (acetonitrile) using the combination of ACM and 4-Vpy showed better recognition of template than the polymer prepared in the same solvent using the combination of acidic monomer (methacrylic acid) and basic monomer 4-Vpy. On the contrary, when sulfamethazine (SMZ) was used as template, a MIP prepared using the combination of methacrylic acid (MAA) and 4-Vpy showed better recognition of template than the polymer prepared using the combination of ACM and 4-Vpy. Our results indicate that in organic media the degree of retention of the sample molecules on the imprinted polymers was controlled by the hydrogen-bonding interaction between the sample molecules and the polymer, while in aqueous media it was determined to a considerable extent by hydrophobic interactions. In both media the shape, size and the electronic structure of the template molecule were all-important factors in the recognition process.     

Optimization of the process parameters of synthesis of vinblastine imprinted polymer

Molecularly imprinted polymers (MIPs) are tailor-made polymers with high selectivity for the template molecule. This selectivity arises from the synthetic procedure followed to prepare the MIP. In this work, the influence of process parameters on the preparation of vinblastine (VLB) imprinted polymers was presented. In the procedure of polymerization, VLB (0.1 mmol) was used as the template molecule and a commonly used initiator, azobisisobutyronitrile (AIBN), was employed to initiate the reaction at 60 °C. The influence of the following parameters was investigated: the moles of functional monomer (MAA, 0.3-1.0 mmol), the moles of cross-linker (EDMA, 1.5-5.0 mmol) and the porogenic solvent (toluene or acetonitrile). A mathematical method of uniform design was applied to optimize these selected parameters in order to increase the selectivity of MIP for template molecule. The experimental data were analyzed to obtain the regression model and the optimal conditions were achieved by optimization with uniform design software. The MIP was synthesized under the optimal conditions that 1.0 mmol of MAA and 5.0 mmol of EDMA copolymerized in toluene in the presence of 0.1 mmol of VLB. After removal of the template molecule, the obtained MIP was then employed as the sorbents of solid-phase extraction (SPE) to separate VLB from Catharanthus roseus extract. The results showed that the polymer exhibited high affinity to the template molecule and could separate and enrich VLB from C. roseus extract effectively. The recovery of VLB on the optimal MIP was 89.00%, which agreed closely with the predicted recovery. Therefore it is possible to further improve the nature of the polymer by optimizing the polymerization parameters with the method of uniform design.     

A study of competitive molecular interaction effects on imprinting of molecularly imprinted polymers

The work herein reports on an approach to obtain molecularly imprinted polymers (MIPs) for Atmer 129, an antistatic added to polyolefins and a previously non imprinted template with intra molecular H-bonding capability. The template–monomer interactions occurring in pre- and post-polymerization media were analyzed by FTIR and ATR-FTIR, respectively. After the prepolymerization study, the synthesis conditions were discussed and suitable porogens and potential template:monomer stoichiometries were suggested. The imprinting efficiency and selectivity of MIPs were evaluated in batch assays by HPLC or UPLC and compared with thermal behavior and morphological characteristics checked by Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC) and Scanning Electron Microscopy (SEM). The best results were obtained for MIPs synthesized at 60 °C. A relation between imprinting effect and template shape recognition was suggested by selectivity studies. The major conclusion, which has been drawn from FTIR and DSC studies, is that independently of the H-bonding strength between Atmer 129 and monomer, the template started to crystallize out during the polymerization reaction, thus reducing the imprinting effect.     

Surface imprinted polymers for oil denitrification with the combination of computational simulation and multi‐template molecular imprinting

Multi‐template molecular imprinting technique was employed for the theoretical study about industrial oil denitrification. Prior to the preparation of multi‐template molecularly imprinted polymers (MT‐MIPs), density functional theory was used for simulating the imprinted pre‐assembly systems composed of template (aniline, indole, or 3‐methylinndole) and monomer [methacrylic acid, acrylamide (AM), and 4‐vinylpyridine]. MT‐MIPs were synthesized as surface MIPs simply and successively by seeded emulsion polymerization or two‐stage precipitation polymerization. The experimental results were consistent with the simulative results, which demonstrated that AM was more suitable monomer together. In addition, seeded emulsion polymerization synthesized MT‐MIPs with better performance compared with two‐stage precipitation polymerization. The adsorption kinetics and adsorption isotherm of MT‐MIP prepared with AM using seeded emulsion polymerization were fitted with different models. The fitting results indicated that pseudo‐second‐order kinetics model and Freundlich isotherm model were suitable for describing the adsorption process of AM seeded emulsion polymerization. This study will provide a certain guidance and theoretical basis for introducing the combination of multi‐template molecular imprinting technique and computational simulation into the field of industrial denitrification. Copyright © 2015 John Wiley & Sons, Ltd.     

1-氨基乙内酰脲分子印迹聚合物的制备和吸附性能研究

以1-氨基乙内酰脲(AHD)为模板分子,α-甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,采用本体聚合方法合成了分子印迹聚合物(M IP),考察了模板分子与功能单体不同比例下制备的M IP对模板分子的吸附性能。通过Scatchard分析,表明该印迹聚合物上存在一类等价的吸附位点,其结合位点的离解常数KD=4.33mmol/L。     

Determination of methotrexate in human serum by high-performance liquid chromatography combined with pseudo template molecularly imprinted polymer

A pseudo template molecularly imprinted polymer (MIP) was prepared for methotrexate (MTX) and a RP-HPLC method combined with the MIP was developed for the determination of MTX in human serum. Because of the poor solubility of MTX in common MIP preparation solvents, trimethoprim (TMP), a molecule having the similar imprinting sites as MTX, is selected as the pseudo template. The MIP was prepared using methacrylic acid (MAA) and ethylene glycol dimethacrylate as functional monomer and cross-linker, respectively. ¹H NMR study showed highly strong interaction between TMP and MAA with hydrogen bonds. Chromatographic behaviors indicated that the TMP-MIP possessed excellent affinity and selectivity for MTX. And the imprinting factor for MTX was high up to 9.5 when 7:3 of acetonitrile:methanol (v/v) was used as mobile phase. Moreover, TMP-MIP was used as the solid-phase extraction (SPE) material to enrich the target compound MTX in human serum samples for HPLC analysis. The SPE process was carefully optimized and good recoveries of MTX were obtained as 81.6–86.2% with RSD of 0.22–1.84% when the spiked concentration of MTX was 2.0–10.0 μg mL⁻¹ in human serum samples. The results indicated that the pseudo template MIP can be applied to preconcentration, purification and analysis of MTX in clinic samples.     

Via protoporphyrin to the synthesis of levofloxacin‐imprinted polymer

A new molecularly imprinted polymer (MIP) for levofloxacin was prepared by the combined use of methacrylic acid and protoporphyrin as functional monomers. The adsorption properties of resultant imprinted polymers were evaluated by equilibrium rebinding experiments. The highest binding capacity of levofloxacin achieved from the optimized imprinted polymer in acetonitrile was 246.26 µmol/g with an imprinting factor of 2.05. A ?uorescence quenching effect was observed when a protoporphyrin‐based imprinted polymer was incubated in the solutions of levofloxacin. The results indicated that the protoporphyrin‐based MIPs were able to create higher binding cavities for template compared with MIPs using only methacrylic acid as a functional monomer. It should be expected that the cooperative use of the protoporphyrin with supplemental different functional monomers may be an alternative to obtain MIP with the improvement of the selectivity. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and characterization of poly(methacrylic acid)‐based molecularly imprinted polymer nanoparticles for controlled release of trinitroglycerin

In this study, a novel molecularly imprinted polymer (MIP) based on methacrylic acid (MAA) monomer was synthesized to control release of trinitroglycerin (TNG) as a vasodilator drug for adjusting the cardiac conditions. For this purpose, TNG nanospheres based on poly(methacrylic acid) (PMAA) were prepared by using the precipitation polymerization process. The synthesized TNG nanospheres‐based MIP samples were characterized by means of Fourier transform infrared spectroscopy and field‐emission scanning electron microscopy in order to investigate their provided active functional groups within the cavities as well as morphology, respectively. The results showed that the appropriate non‐covalent bindings between the TNG (template) and PMAA provided within the MIP samples with imprinting factor of 1.98 were achieved by optimizing the amounts of trimethylolpropane trimethacrylate (TRIM) as a cross‐linker and MAA as a functional monomer. On the basis of these obtained conditions, the polymeric nanospheres containing TNG were formed in shape of spherical particles with an average diameter sizing about 40 nm. These remarkable results were obtained by the use of 1:10 molar ratio of TRIM/TNG and 1:6 molar ratio of MAA/TNG. Moreover, in‐vitro release of the TNG from the MIP samples to phosphate buffer solution (pH = 7.4) indicated that the MIP samples had a moderate and gradual release compared with the non‐imprinted polymer samples. These outcomes conducted us to consider the samples as carriers for adjusting potentially cardiac conditions. Copyright © 2016 John Wiley & Sons, Ltd.     

三唑酮分子印迹预组装体系的分子模拟与吸附性能

以三唑酮为模板分子, 以丙烯酰胺(AM)、 丙烯酸(AA)、 甲基丙烯酸(MAA)和三氟甲基丙烯酸(TFMAA)为功能单体预组装了分子印迹聚合物体系, 采用半经验法和从头算法, 利用Hyperchem软件模拟了三唑酮与4种功能单体所组成的分子印迹预组装体系的构型、 能量、 反应配比及复合反应的结合能, 选择复合物结合能最高的功能单体用于分子印迹聚合物的合成. 采用密度泛函方法计算了模板与单体在不同致孔剂中的溶剂化能. 结果表明, 三唑酮与三氟甲基丙烯酸所形成复合物的作用力最强, 在非极性溶剂中溶剂化能最弱. 由预组装体系的差示紫外光谱法研究发现, 一分子三唑酮可与两分子三氟甲基丙烯酸在氯仿中形成氢键复合物, 与分子模拟的结果一致. 在最佳模拟条件下, 合成了三唑酮的印迹聚合物, 利用吸附等温线Langmuir和Freundlich模型研究了印迹聚合物的吸附行为及识别机理. 上述方法对于分子印迹体系的筛选及分子印迹聚合物性能的预测有重要的意义.